COMPOSITE STRUCTURES
·
2025
·
IF 7.1
Fan Xie,Qiaoling Liu,Longhai Zhuo,Haitao Wei,Yuxuan Shang,Tao Liu,Zhaoqing Lu
High-performance electromagnetic interference (EMI) shielding materials with lightweight, multi-resistant properties and superior, tunable EMI shielding performance are urgently needed for next-generation integrated electronic and communication systems, particularly in portable smart devices and artificial intelligence applications. In this work, hollow h-MXene/ANF backbones with a continuous shielding network were fabricated using a facile vacuum-assisted filtration process combined with a sacrificial template method. The structurally engineered h-MXene/ANF hybrid films achieved outstanding EMI shielding effectiveness (EMI SE) of 78.9 dB and EMI specific shielding effectiveness per unit thickness (SSE/t) of 15703 dB·cm 2 ·g –1 . These exceptional properties are attributed to high ohmic losses, multiple internal reflections, polarization relaxation, and efficient losses in the hollow MXene conductive layer, facilitated by impedance mismatches within the sandwich structure. Notably, the EMI SE performance can be tuned by adjusting the content of hollow MXene microspheres. In addition, extensive hydrogen-bonding interactions between the high-performance ANF and MXene contribute to enhanced mechanical properties, including tensile strength of up to 37 MPa, as well as excellent thermal stability and self-cleaning capabilities. Overall, the sandwich-structured h-MXene/ANF hybrid films exhibit superior mechanical strength, multi-resistant properties, and ultra-high, tunable EMI shielding performance, making them promising candidates for advanced EMI shielding in next-generation portable smart electronic devices.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2025
·
IF 13.2
Qiang Li,Tianhui Zhao,Junjie Zhu,Muyuan Ma,Guoqing Hou,Mengyuan Fang,Yu Shen,Xiaoli Zhao,Zhi Tang,Fengchang Wu
Acetaminophen (ACTP) is a widely used antipyretic and analgesic, especially after the COVID-19 pandemic, during which its extensive use led to widespread distribution in the environment. Conventional wastewater treatment methods struggle to fully degrade ACTP, posing potential risks to human health and ecosystems. Therefore, developing efficient, safe, environmentally friendly, and cost-effective techniques for ACTP degradation is imperative. Herein, ultrathin-single Ti 3 C 2 T X MXene (USM) and multilayered Ti 3 C 2 T X MXene (MLM) with nanometer thickness and micron transverse size were synthesized from the MAX via acid/salt (HCl + LiF) etching process. Time-resolved photoluminescence indicated that the average fluorescence lifetimes (τ ave ) of USM (96.870 ns) and MLM (53.839 ns) are 9.47 and 5.26 times that of MAX (10.229 ns), respectively. Both materials exhibited excellent ACTP degradation ability (∼100 %) in a photocatalytic Fenton-like reaction process under visible light within 60 min. The visible light enhanced the degradation of ACTP by accelerating the redox cycles of Ti 3+ /Ti 4+ and achieving continuous catalytic activation of H 2 O 2 to form reactive oxygen species (h + , •OH, •O 2 – , and 1 O 2 ). Among these, h + radicals were the primary contributors, with •OH, •O 2 – , and 1 O 2 also playing supportive roles in the degradation process. The ecological structure–activity relationships analysis indicated that the degradation intermediates had significantly lower toxicity than ACTP itself. This study offers valuable insights into MXene’s application in photocatalytic Fenton-like systems, paving the way for efficient pharmaceutical degradation.
✓ 已验证
产品关联
DOI
高影响因子
NEW JOURNAL OF CHEMISTRY
·
2025
·
IF 2.5
Guoyang Lv,Qiulan Lu,Zhengkun Ma,Liqi Wei,Jieying Wei,Xiongdiao Lan,Weiguo Li,Pengru Liu,Dankui Liao
This study aimed to develop a highly efficient and stable electrocatalyst for oxygen evolution reaction (OER) to enhance hydrogen production through water splitting. Layered double hydroxides (LDHs) are promising OER electrocatalysts due to their low cost, tunable composition, abundant active sites, and large specific surface areas. However, their poor conductivity, propensity for aggregation, and inherent low activity severely hinder their broader practical application. In this work, a hybrid electrocatalyst CoLaLDH/MXene composite was successfully developed through a straightforward hydrothermal synthesis approach, and it was further enhanced via sulfur doping to boost its OER performance. The prepared S-CoLaLDH/MXene electrocatalyst outperformed RuO2 and many other reported catalysts. It exhibited a low overpotential of 303 mV at 10 mA cm-2, a Tafel slope of 57 mV dec-1, and remarkable electrochemical stability. This research provides a valuable guideline for the design of high-performance LDH-based OER catalysts, and the proposed direct synthesis methodology establishes a foundation for its widespread application.
✓ 已验证
产品关联
DOI
高影响因子
Scientific Reports
·
2025
·Vol. 15
·期 1
·1-14
·
IF 3.9
Liu Liming,Lian Hongxia,Deng Heming,Zhang Weixin
Challenges associated with the cathode material of Lithium–oxygen (Li–O 2 ) battery, particularly the sluggish kinetics of oxygen reduction reaction (ORR) and oxygen evolution reaction, as well as the accumulation of discharge product Li 2 O 2 , have hindered its further advancement. Here, an in-situ synthesis strategy was adopted to load a bimetallic Ni–Co metal–organic framework (Ni/Co-MOF) onto MXene (Ti 3 C 2 ) layers. Subsequently, a free-standing and flexible Ni/Co-MOF@Ti 3 C 2 hybrid membrane is prepared via a layer-by-layer self-assembly method, specifically designed for efficient ORR and as a cathode for Li–O 2 batteries. The Ni/Co-MOF@Ti 3 C 2 hybrid membrane integrates the high conductivity, unique two-dimensional layered structure, and excellent mechanical properties of Ti 3 C 2 with the bimetallic active sites of Ni/Co-MOF, exhibiting remarkable ORR catalytic activity in an O 2 -saturated 1 M LiTFSI electrolyte. The structural characteristics of the hybrid membrane provide smoother expansion pathways for Li + and O 2 , effectively promoting the deposition and decomposition of Li 2 O 2 . This not only enhances the electrochemical performance of the Li–O 2 battery but also overcomes the inherent limitations of traditional slurry-based cathode preparation methods. Experimental results demonstrate that Li–O 2 batteries utilizing the Ni/Co-MOF@Ti 3 C 2 hybrid membrane as the cathode achieve an ultra-high capacity of 36,125 mAh/g at a current density of 1000 mA/g, while exhibiting excellent cycle stability (271 cycles with a limited capacity of 1000 mAh/g at 1000 mA/g) and outstanding rate performance. The hybrid membrane’s capacity and cycle performance can be further optimized by controlling its thickness. These promising results offer novel insights into the innovative design of air cathodes for metal–air batteries, and the proposed method provides a new route for the manufacture of high-performance battery cathodes.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2022
·
IF 9.965
Yang Jin,Kai Wang,Shaoxiang Li,Jingquan Liu
With the rapid consumption of traditional fossil energy, the utilization of solar energy via photothermal conversion to obtain fresh water from seawater or wastewater should be a promising alternative to solve the shortage of energy resources. At present, evaporators based on diverse photothermal conversion materials have been developed, but most of them are still facing the drawbacks of complicated structure, complex preparation and poor salt resistance, which severely affect their broad practical applications. Multilayer-MXene (mMXene) and polydopamine (PDA) nanoparticles are two kinds of materials with excellent photothermal conversion efficiency. In this study, we loaded these two materials with optimized mass ratio into the thermally insulated and low-cost melamine foam, followed by simple annealing treatment to afford three-dimensional and self-floating carbonized MXene/PDA foam (CMPF) evaporators with high hydrophilicity, unpleasant thermal conductivity, and remarkable light absorbance. The evaporation rate of CMPF, as a result, could attain 1.598 kg m −2 h −1 under 1 sun (1 kW m −2 ) irradiation while the photothermal conversion efficiency is calculated to be 89.8%. In addition, CMPF-2 displays excellent desalination ability, self-desalination ability, good cycle stability and reliable safety performance as revealed by bacterial culture experiment. Combining these advantages, it has been revealed that CMPF-2 possesses certain feasible practical applications in seawater desalination.
✓ 已验证
DOI
高影响因子
Frontiers in Materials
·
2023
·
IF 3.2
Wang Wei,Song Xiangning,Xie Yan,Sheng Xuejia,Zhang Shucai
In recent years, oil spills and organic pollution have caused severe damage to the ecological environment. Therefore, the treatment of oily wastewater has become a serious challenge. Here, with the help of melamine foams as a substrate, MXene nano-rough structures were built, and cetyltrimethoxysilane was grafted onto their surfaces to create an oil-absorbing material that is both user-friendly and effective at oil-water separation. Due to the nano structures of MXene were constructed and the long-chain silanes were modified on the foam surface, the material became superhydrophobic. In addition to being able to selectively absorb oils from an oil/water mixture (including emulsified oils) up to 111 times its weight, the modified foam was found to have a water contact angle of 157 which could selectively absorb oil but not water. Furthermore, it demonstrated sustained hydrophobicity and lipophilicity after experiencing strong acid/alkali or prolonged high-temperature treatment, allowing for various scenarios where oil-water separation can be used in severe settings without compromising performance.
✓ 已验证
DOI
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2022
·
IF 5.518
Shuang Xiong,Tao He,Tao Zhou,Dalei Wang,Yueyue Wang,Chaoqing Dai,Wei Liu
Pesticides are often overused in production and life, which harms the environment and human health. However, the current tools for detecting pesticides are not effective enough due to lower flexibility and stability. With regards to this, we synthesized a flexible substrate of PDMS modified by MXene (Ti 3 C 2 Tx)/Ag. The MXene-noble metal composite substrate can detect 4-mercaptobenzoic acid (4MBA) at a low concentration of 1.0 × 10 −11 M. Furthermore, MXene can inhibit the oxidation of Ag nanoparticles (NPs) and efficiently localize the molecules to be tested within the hot spots. In particular, the flexibility of the substrate enables the detection of trace amounts of thiabendazole (TBZ) by collecting samples directly from uneven surfaces such as fruits and vegetables. The substrate is also capable of detecting a mixture of TBZ and 4MBA simultaneously. Using intrinsic Raman peak of PDMS as the internal standard can eliminate the influence of environmental factors on the detection results, which makes the detection results more quantitative. The resultant noble metal-semiconductor substrates show great potential applications in food safety and environmental monitoring fields.
✓ 已验证
DOI
高影响因子
BIOMACROMOLECULES
·
2021
·
IF 6.988
Dongning Liu,Yujiao Gao,Yiheng Song,Hengfeng Zhu,Linjun Zhang,Yuanyuan Xie,Hui Shi,Zhuqun Shi,Quanling Yang,Chuanxi Xiong
Electronic skin has aroused extensive research interest due to high similarity with human skin. Realizing a multifunctional electronic skin that is highly consistent with skin functions and endowed with more other functions is now a more urgent need and important challenge. Here, we use 2,2,6,6-tetramethylpiperidinyl-1-oxyl (TEMPO)-oxidized cellulose nanofibril (TOCN) dispersion and highly conductive Ti3C2TX dispersion to prepare TOCN/Ti3C2TX composite film through vacuum-assisted filtration. The obtained composite film imitating the nacre-like lamellar structure of natural shells has good mechanical properties (124.6 MPa of tensile strength). Meanwhile, the composite film also showed excellent electromagnetic shielding performance (36 dB), biocompatibility, and antibacterial properties. In addition, the piezoresistive sensor assembled from the composite film exhibited a high sensitivity (11.6 kPa–1), fast response and recovery time (≤10 ms), ultralow monitoring limit (0.2 Pa), and long-term stability (>10 000 cycles). It also could detect human daily activities such as finger bent, chewing, and so on.
✓ 已验证
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2020
·
IF 7.489
Minying Wu,Qian Zhang,Yuanyuan Fang,Chao Deng,Fangzhou Zhou,Yi Zhang,Xingdong Wang,Yi Tang,Yajun Wang
Two-dimensional (2D) nanoreactors with cascade catalytic activity for glucose oxidation and hydrogen peroxide decomposition are prepared via immobilizing glucose oxidase (GOx) on Ti 3 C 2 MXene nanosheets. Amino-rich polypeptide, poly- l -lysine (PLL), is applied to modify the ultra-thin Ti 3 C 2 MXene nanosheets with a compatible surface for GOx immobilization. The PLL-modified Ti 3 C 2 nanosheets possess a positively charged surface and show an excellent GOx loading capacity as high as 50 wt% of the Ti 3 C 2 nanosheets. The physically adsorbed enzymes are then cross-linked with the amine groups in the PLL chains to form a robust GOx-PLL network covered on the MXene nanosheets. The GOx-conjugated Ti 3 C 2 -PLL (Ti 3 C 2 -PLL-GOx) nanosheets showed superior enzymatic activities than the activities of GOx immobilized on an inert porous silica substrate, largely because that the Ti 3 C 2 nanosheets can catalyze the decomposition of the toxic intermediate H 2 O 2 generated from the glucose oxidation. Given the excellent electrical conductivity of Ti 3 C 2 MXene, the Ti 3 C 2 -PLL-GOx nanosheets are further deposited on glassy carbon electrode to construct a high-performance biosensor with a glucose detection limit of 2.6 μM.
✓ 已验证
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2022
·
IF 10.383
Hui Dong,Jingchao Sun,Xingmin Liu,Xiaodan Jiang,Shaowei Lu
The universal application of wearable strain sensors in various situations for human-activity monitoring is considerably limited by the contradiction between high sensitivity and broad working range. There still remains a huge challenge to design sensors featuring simultaneous broad working range and high sensitivity. Herein, a typical bilayer-conductive structure Ti3C2Tx MXene/carbon nanotubes (CNTs)/thermoplastic polyurethane (TPU) composite film was developed by a simple and scalable vacuum filtration process utilizing a porous electrospun thermoplastic polyurethane (TPU) mat as a skeleton. The MXene/CNTs/TPU strain sensor is composed of two parts: a brittle densely stacked MXene upper lamella and a flexible MXene/CNT-decorated fibrous network lower layer. Benefiting from the synergetic effect of the two parts along with hydrogen-bonding interactions between the porous TPU fiber mat and MXene sheets, the MXene/CNTs/TPU strain sensor possesses both a broad working range (up to 330%) and high sensitivity (maximum gauge factor of 2911) as well as superb long-term durability (2600 cycles under the strain of 50%). Finally, the sensor can be successfully employed for human movement monitoring, from tiny facial expressions, respiration, and pulse beat to large-scale finger and elbow bending, demonstrating a promising and attractive application for wearable devices and human–machine interaction.
✓ 已验证
DOI
高影响因子
2D Materials
·
2022
·Vol. 10
·期 1
·014004
·
IF 6.861
Guanshun Xie,Yisong Zhu,Changqiang Yu,Xiuqiang Xie,Nan Zhang
Steering photogenerated electron flow to the effective reactive sites is ideal for photocatalytic H2 evolution. Herein, as a proof-of-concept, NiS is coupled with a typical Schottky heterojunction of Ti3C2Tx MXene@In2S3 through the photodepotition method towards improving the photocatalytic H2 evolution performance. In addition to the Schottky effect-mediated electron transfer in Ti3C2Tx MXene@In2S3 heterojunctions, p–n junctions form between In2S3 and NiS to extract photoinduced electrons, which is found to cooperate with the role of effective H2 evolution reactive sites. The synergistic dual functions of NiS cooperate with Ti3C2Tx MXene promote multichannel electron transfer in Ti3C2Tx MXene@In2S3-NiS hybrids to improve the photocatalytic hydrogen evolution reaction (HER) efficiency by 41 times compared to the bare In2S3. These results enlighten the engineering of the spatial transfer of photoinduced electrons to the reactive sites toward boosting the efficiency of photocatalytic HER.
✓ 已验证
DOI
高影响因子
JOURNAL OF MEMBRANE SCIENCE
·
2021
·
IF 8.742
Dan-Dan Shao,Qingxiao Zhang,Long Wang,Zhen-Yuan Wang,Yi-Xuan Jing,Xue-Li Cao,Fang Zhang,Shi-Peng Sun
Highly permeable two-dimensional membranes are desirable for efficient molecular sieving and resource recovery through confined-space mass transfer via nanosheets restacking. However, their application requires addressing the swelling issue of 2D nanosheets in solvents, weak interfacial interaction between the adjacent nanosheets , and performance declination caused by over-restacking. This study reports an interfacial adhesion enhanced MXene membrane via pillaring carbon nanotubes (CNTs) combined with an upgraded post-treatment method consisting of fan-drying and air-drying. The combined drying method induces the nanosheets stacking to a partial-dehydration membrane structure, granting the neat MXene membrane with stable anti-swelling property. The strong π-π interactions and van der Waals forces of CNTs impel the close-fitting of MXene nanosheets for enhanced anti-swelling property and interfacial bonding force. The CNTs with confined-space mass transfer effect and high mechanical strength elevate the pillared MXene/CNTs-CTAB membrane performance for 5 times (the pure water permeance was enhanced from 20.09 L·m -2 ·h -1 ·bar -1 to 100.89 L·m -2 ·h -1 ·bar -1 ), endowing the membrane with high anti-pressure property. The membrane with precise molecular sieving property exhibits great potential in resource recovery and energy-saving.
✓ 已验证
DOI
高影响因子