文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第2857至2868个,产品总数8,416个

切换升序
N'
Biomass Conversion and Biorefinery · 2023 · IF 4

Synthesis, characterization, and comparison of N-modified biochar with different nitrogen sources for bisphenol A adsorption

Zhang Xian,Liu Ze,Khan Hafiz Ihsan Ul haq,Barati Bahram,Parakhonskiy Bogdan,Skirtach Andre G.,Rousseau Diederik P. L.,Van Hulle Stijn

Nitrogen source–modified biochar was produced from rice straw–derived biochar (RSBC) via pyrolysis carbonization using nitrogen sources such as ammonium chloride, dicyandiamide, melamine, thiourea, and urea. The characteristics of the resulting biochars were compared, including their elemental compositions, surface functional groups, and morphology. The N-modified biochar contained N- and O-based groups (N–H, C–N, C≡N, O–H, and C–O), primarily consisted of mesopores (3.01 ~ 14.42 nm pore diameter), and had a specific surface area ranging from 95.87 to 167.86 m2 g −1 . The N-modified biochar’s BPA adsorption capacity was correlated to the activation temperature (correlation coefficient n  = 0.5), with adsorption capacities varying from 7.43 to 63.09 mg g −1 . Ammonium chloride–modified biochar synthesized at 800 °C had over twice the BPA adsorption capacity of pristine biochar (28.80 mg g −1 ) among various nitrogen sources evaluated. The pseudo-second-order model characterized the adsorption kinetics of BPA, while the Freundlich model faithfully captured its isotherms. This study emphasizes the significance of proper nitrogen source selection and optimal modification temperatures to enhance the BPA adsorption capacity of biochar. Graphical Abstract

CAS / MDL: 80-05-7
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ENVIRONMENTAL RESEARCH · 2020 · IF 5.715

Activation of peroxymonosulfate using metal-free in situ N-doped carbonized polypyrrole: A non-radical process

Zexiang Wang,Lihui Huang,Yuxia Wang,Xiaoming Chen,Hongfei Ren

Metal-free catalysts are widely considered as promising alternatives to traditional metal-based catalysts, which can effectively activate peroxymonosulfate (PMS). In this study, a novel metal-free catalyst, carbonized polypyrrole (CPPy) was synthesized through high-temperature carbonization of PPy, easily achieving the in situ N doping without the addition of nitrogen sources. Tetracycline (TC) was selected as the target contaminant to assess the catalytic activity of the CPPy/PMS system. Enhanced catalytic activity was observed in CPPy/PMS over a wide pH range (3.0–9.0), and the removal rate of TC by CPPy-3/PMS reached 91.3% after 10 min. After regenerating the used catalyst, the catalytic activity was refreshed, implying its stability and recyclability . The catalytic degradation of TC by CPPy/PMS was mainly attributed to a non-radical process. CPPy, as an intermediary, grabbed electrons from the electron-donating groups of TC and transferred them to the PMS molecule. Thereafter, TC that lost electrons was oxidized and degraded, and the O–O bonds of PMS were destroyed by the transferred electrons to form S O 4 2 − SO42− and OH − . Moreover, O ⋅ 2 − O⋅2− and 1 O 2 were involved in TC degradation . TC degradation pathway was investigated through HPLC-MS analysis. These findings provide a promising strategy for the construction of catalysts for PMS and environmental remediation.

CAS / MDL: 109-97-7 299-11-6
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
JOURNAL OF POWER SOURCES · 2023 · IF 9.2

Construction of a dense and N-rich solid electrolyte interface for dendrite-free lithium metal batteries

Lei Zhang,Bing Sun,Qinghua Liu,Lin Song,Teibang Zhang,Xiaobo Duan

Lithium (Li) metal anode has attracted extensive research interest, while lithium dendrites and the resulting irreversible effects have restricted its development. In this study, a thin and dense solid electrolyte interface is constructed by introducing 3-(1-pyridinio)-1-propane sulfonate (PPS), a pyridine functional groups additive in DME/DOL based electrolyte to inhibit the lithium dendrite growth. The preferential decomposition of PPS has resulted in a reduction of gas generation. Subsequently, this process leads to forming of an N-rich solid electrolyte interface , which has been found to cause a decrease in polarization potential and change the behavior of lithium deposition from dendrites to a more cellular Li metal surface. As a result, our proposed electrolyte provides multiple functionalities, including remarkable rate capability, cyclic stability, and coulombic efficiency. Significantly, Li | Li symmetrical cells exhibited a stable cycle over 1200 h at a high current density and capacity of 5 mA cm −2 /15 mAh cm −2 . We are optimistic that our proposed method can be employed in future research to identify electrolytes appropriate for use in lithium metal anodes.

CAS / MDL: 15471-17-7 24937-79-9
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Materials · 2023 ·Vol. 16 ·期 14 ·5137 · IF 3.4

Spent Coffee Grounds Derived Carbon Loading C, N Doped TiO2 for Photocatalytic Degradation of Organic Dyes

Yanling Jin,Jiayi Wang,Xin Gao,Fang Ren,Zhengyan Chen,Zhenfeng Sun,Penggang Ren

Titanium dioxide (TiO2) is an ideal photocatalyst candidate due to its high activity, low toxicity and cost, and high chemical stability. However, its practical application in photocatalysis is seriously hindered by the wide band gap energy of TiO2and the prone recombination of electron-hole pairs. In this study, C, N doped TiO2were supported on spent coffee grounds-derived carbon (ACG) via in situ formation, which was denoted as C, N–TiO2@ACG. The obtained C, N–TiO2@ACG exhibits increased light absorption efficiency with the band gap energy decreasing from 3.31 eV of TiO2to 2.34 eV, a higher specific surface area of 145.8 m2/g, and reduced recombination rates attributed to the synergistic effect of a spent coffee grounds-derived carbon substrate and C, N doping. Consequently, the optimal 1:1 C, N–TiO2@ACG delivers considerable photocatalytic activity with degradation efficiencies for methylene blue (MB) reaching 96.9% within 45 min, as well as a high reaction rate of 0.06348 min−1, approximately 4.66 times that of TiO2(0.01361 min−1). Furthermore, it also demonstrated greatly enhanced photocatalytic efficiency towards methyl orange (MO) in the presence of MB compared with a single MO solution. This work provides a feasible and universal strategy of synchronous introducing nonmetal doping and biomass-derived carbon substrates to promote the photocatalytic performance of TiO2for the degradation of organic dyes.Keywords:titanium dioxide;spent coffee grounds–derived carbon;C, N doping;photocatalytic degradation;organic dyes;dye mixture

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
ACS Applied Materials & Interfaces · 2023 · IF 9.5

Cu2O Nanoparticles Wrapped by N-Doped Carbon Nanotubes for Efficient Electroreduction of CO2 to C2 Products

Jilin Liu,Kai Yu,Qianlong Zhu,Zhiyuan Qiao,Hong Zhang,Jie Jiang

Electroreduction of carbon dioxide (CO2) to C2 products (ethylene and ethanol) using efficient catalysts is a feasible approach to alleviate the climate crisis. Cuprous oxide nanoparticles (Cu2O NPs) are a promising catalyst for C2 production but suffer from inherent selectivity and durability. To address this challenge, a Cu2O NPs-nitrogen-doped carbon nanotube (Cu2O NPs-NCNT) composite was prepared with carbon nanotubes (CNTs), Cu2O NPs, and phthalocyanine (Pc). The results indicate that Cu2O NPs-NCNT has excellent Faradic efficiency of C2 products (77.61%) at −1.1 V vs RHE, which is 103.43% higher than that of Cu2O NPs. In the potentiostatic electrolysis combined with Raman spectroscopy and X-ray photoelectron spectroscopy (XPS) measurements, Cu2O NPs-NCNT exhibited structural and catalytic current stability over 10 h. Finally, density functional theory calculations combined with XPS demonstrated that the NCNT in Cu2O NPs-NCNT can selectively absorb CO2 through specific N–CO2 interactions. Our work provides a unique strategy to promote the selectivity of Cu2O NPs for C2 production by introducing N-doped linear carbon materials to fabricate composite.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
Sustainable Materials and Technologies · 2023 · IF 9.6

Amorphous carbon with N-S bond active center for enhanced capacitive contribution of potassium-ion batteries

Dandan Ouyang,Liuqian Yang,Ya-nan Wang,Yongsheng Li,Feng Yu,Jiao Yin

Carbon materials have great potential in achieving excellent potassium-ion batteries (PIBs), while the low theoretical capacity of carbon materials limits the application of potassium ion batteries . Here, we reported an amorphous porous carbon with rich N-S bonds (N-S/C) by simple self-assembly possess and pyrolysis possess. The prepared N-S/C material possesses plentiful N-S bonds, which can act as active center to enhance the electrochemical capacity and accelerate transport dynamics. In addition, abundant porous structure can increase the contact area between electrode materials and electrolyte to shortens the diffusion path of ion transport, thereby improving the rate performance. As PIBs anodes, the N-S/C material exhibits a markedly enhanced reversible capacity of 389 mAh g −1 at 50 mA g −1 , excellent cycling stability (188.8 mAh g −1 at 500 mA g −1 after 1000 cycles) and rate performance (105 mAh g −1 at 2 A g −1 ). Importantly, the in-situ Raman unravels a reversible mechanism that intercalation/deintercalation of K + into/from the N-S/C, and the electrochemical analysis shows the N-S bond can improve the capacitive activity and enable fast kinetics toward superior K + -storage. These results demonstrate a promising carbonaceous anode material for PIBs and may provide guidance for designing of electrode materials of PIBs.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
MOLECULES · 2023 ·Vol. 29 ·期 1 ·146 · IF 4.6

Fe2O3 Embedded in N-Doped Porous Carbon Derived from Hemin Loaded on Active Carbon for Supercapacitors

Zitao Yang,Cunhao Luo,Ning Wang,Junshao Liu,Menglong Zhang,Jing Xu,Yongnan Zhao

The high power density and long cyclic stability of N-doped carbon make it an attractive material for supercapacitor electrodes. Nevertheless, its low energy density limits its practical application. To solve the above issues, Fe2O3embedded in N-doped porous carbon (Fe2O3/N-PC) was designed by pyrolyzing Hemin/activated carbon (Hemin/AC) composites. A porous structure allows rapid diffusion of electrons and ions during charge–discharge due to its large surface area and conductive channels. The redox reactions of Fe2O3particles and N heteroatoms contribute to pseudocapacitance, which greatly enhances the supercapacitive performance. Fe2O3/N-PC showed a superior capacitance of 290.3 F g−1at 1 A g−1with 93.1% capacity retention after 10,000 charge–discharge cycles. Eventually, a high energy density of 37.6 Wh kg−1at a power density of 1.6 kW kg−1could be delivered with a solid symmetric device.Keywords:Hemin/AC;Fe2O3/N-PC;pseudocapacitance;quasi-solid-state supercapacitor

CAS / MDL: 16009-13-5
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
APPLIED PHYSICS LETTERS · 2023 ·Vol. 123 ·期 8 · IF 4

Optimization of diamond sensor for trace detection of SARS-CoV-2 N-protein using Au nanoparticles

Zhang Qianwen,Wu Huaxiong,Du Yuxiang,Zhang Minghui,Xu Bangqiang,Chen Genqiang,He Shi,Zhang Dan,Li Qi,Wang Hong-Xing

In this study, Au nanoparticles were introduced to functionalize hydrogen-terminated diamond (H-diamond) to optimize surface modification and improve the performance of diamond sensor for trace detection of SARS-CoV-2 N-protein. The Au nanoparticles were obtained by an electron beam evaporation system and annealing. Atom force microscope and scanning electron microscope were utilized to characterize the structure, morphology, and distribution of fabricated Au nanoparticles. The concentration of SARS-CoV-2 N-protein was determined by the investigation of transfer characteristics of a diamond solution gate field effect transistor. Sensitivity of this sensor was obtained as 27.43 mV/lg (N-protein concentration), which was higher than a regular H-diamond sensor. In addition, it had a wider linear detection range of 10 −15 –10 −5  mg/ml and a lower limit of detection of 10 −15  mg/ml. Accordingly, the detection performance of diamond sensor has been greatly improved due to the functionalization of Au nanoparticles.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
DALTON TRANSACTIONS · 2023 ·Vol. 53 ·期 3 ·917-931 · IF 4

In situ sonochemical synthesis of flower-like N-graphyne/BiOCl0.5Br0.5 microspheres for efficient removal of levofloxacin

Shuyan Li,Mingxuan Sun,Xiangzhi Huang,Haohao Chen,Junjie Zhao,Ziyang Li

In this work, N-graphyne is in situ coupled with BiOCl0.5Br0.5via a facile one-step sonochemical method. To our knowledge, both the synthesis strategy for BiOCl0.5Br0.5 and the N-graphyne/BiOCl0.5Br0.5 photocatalytic system are new developments. A collection of characterization methods is adopted to detect the morphologies, structures, and electronic and optical properties. The results demonstrate that wrinkle-like N-graphyne nanosheets successfully enwind around or on flower-like BiOCl0.5Br0.5 microspheres, which are regularly assembled by BiOCl0.5Br0.5 nanosheets. Compared with pristine BiOCl0.5Br0.5, N-graphyne/BiOCl0.5Br0.5 composites exhibit superior adsorption capacity and visible-light-driven photocatalytic degradation of levofloxacin. In particular, the optimal N-graphyne amount for ameliorating the photocatalytic performance of BiOCl0.5Br0.5 is ascertained. In addition, the good stable performance for photocatalysis is confirmed by four cycling experiments. The dominant active species is confirmed to be O2˙− during photodegradation. The improved photocatalytic activity is attributed to the enhanced visible light response and the accelerated transfer/separation of photogenerated carriers by N-graphyne, which are verified using UV–vis absorption spectra, photocurrents, photopotentials, Nyquist plots, and Mott–Schottky curves. This study develops a new perspective for the synthesis and modification of BiOX solid solution, which can be used as an efficient photocatalyst.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
Journal of Energy Storage · 2023 · IF 9.4

Overall upgrading Zn-ion storage capability by engineering N/O co-doped hydrophilic hierarchical porous carbon

Xiuli Huang,Wei Chen,Huan Liu,Shi Li,Wangwang Zhang,Yiming Ren,Rongli Zhang,Maodong Xu,Jiang Zhu

The couple of supercapacitors' high power density and batteries' high energy density endows aqueous zinc-ion hybrid supercapacitors (ZIHSCs) a perspective candidate for next-generation energy storage devices. Biomass-derived hierarchical porous carbon with excellent wettability towards aqueous electrolyte is regarded as a promising cathode for ZIHSCs applications. Herein, a N/O co-doped hydrophilic carbon with hierarchical porous architecture is conversed from protein enriched recycled badminton feathers via a facile and scalable strategy. The resultant carbon presents hierarchical porous architecture with high surface area and mesopore-governed pore size distribution, rich dual-doping of N/O heteroatoms and good water wetting behavior. The all-round teamwork of these unique properties provides numerous interfacial active sites plus extra reversible redox reaction for high energy density, and speedy kinetics for high power density. Incredibly, as-assembled ZIHSC device displays an ultrahigh capacity of 225.3 mAh g −1 at 0.1 A g −1 with an appreciable capacity retention of 73.8 mAh g −1 even at a 1000-fold amplified current density, thereby delivering admirable energy and power densities of 201.4 Wh kg −1 and 83.6 kW kg −1 . Most satisfyingly, an ultralong cycling life with no loss in capacity is achieved after 40,000 cycles even at 50 A g −1 . Therefore, by taking advantage of its intrinsic component, the conversion of biomass waste to high performance carbon-based cathode material holds a broad prospect and practical significance.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CERAMICS INTERNATIONAL · 2023 · IF 5.2

Tailoring Ni3ZnC0.7/graphite heterostructure in N-rich laminated porous carbon nanosheets for highly efficient microwave absorption

Han Ding,Zhihao Sun,Shaoyao Tian,Peng Wang,Zihao Guo,Yu Qiu,Benli Du,Lei Qian

Bimetallic transition carbide nanoparticles (Ni 3 ZnC 0.7 ) encapsulated with graphitic shells were successfully embedded into N-rich laminated porous carbon nanosheets (NC–ZnNi 1.5 ) by one-step pyrolysis of bimetallic organic frameworks. It was found that C atoms penetrated octahedral interstitial spaces of the Ni lattice to form Ni 3 ZnC 0.7 . The charge states and distribution of metal atoms were influenced by the interstitial C atoms, which promoted polarization relaxation and facilitated dielectric loss. Simultaneously, the volatilization of Zn influenced recrystallization and rearrangement of the crystalline domains, facilitated graphitization and established a 3D conductive network to optimize the conductive loss. Besides, multi-level heterogeneous interface and nitrogen doping also further optimized the impedance matching. Benefiting from these advantages, the minimum reflection loss of NC-ZnNi 1.5 was −69.1 dB at 12.7 GHz, and the effective absorption bandwidth was 6.5 GHz. The mechanism of bimetallic carbide's dielectric loss was explained in detail, providing a new pathway for the development of multi-component carbon-based microwave absorbers in the future.

CAS / MDL: 100-97-0 13478-00-7
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
DIAMOND AND RELATED MATERIALS · 2023 · IF 4.1

Hierarchical α-MoC1-x@N-doped carbon nanospheres as counter electrodes for dye-sensitized solar cells

Hui Zhao,Feifei Nie,Shuhui Liu,Yuanhao Li,Kezhong Wu,Mingxing Wu

Molybdenum-based carbides , as one of the representatives of transition metal compounds, are a promising alternative to the expensive and resource constrained Pt-based counter electrode (CE) in dye-sensitized solar cells (DSSCs). Herein, a series of hierarchical α-MoC 1- x @N-doped carbon (MDNC) composites are transformed from the step-by-step pyrolysis of uniformly Mo-based compounds and dopamine precursors at the temperatures of 650, 750, 850, and 950 °C under N 2 atmosphere, respectively. The MDNC precursors were synthesized by a simple one-step self-polymerization in a water-in-oil system. And then, the obtained MDNC nanocrystalline composites can accelerate electron conduction and improve the electrocatalytic property of the tri-iodide reduction reaction (IRR) owing to the C carrier obtained through the pyrolysis process and the N-doped of α-MoC 1- x by the carbonization of dopamine and the high temperature nitrogen atmosphere. In addition, the distinct hierarchical structure of MDNC with well-developed porosity and high specific surface area can expose numerous active catalytic sites. The DSSCs using the MDNC series as CEs for I 3 − /I − exhibit power conversion efficiencies (PCE) of 5.99 %, 6.35 %, 6.57 % and 5.57 %, respectively, which were versus 5.83 % of Pt CE.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。