CERAMICS INTERNATIONAL
·
2017
·Vol. 43
·期 16
·14176-14182
·
IF 2.986
Lin Wang,Benxue Liu,Luyi Zhu,Yongshuai Xie,Yadong Lv,Chonghe Xu,Xiaotong Jin,Xinqiang Wang,Guanghui Zhang,Dong Xu
Polyaceticzirconium (PEZ) sol, which is the precursor of zirconia (ZrO 2 ) continuous fibers, has been synthesized by means of the reaction between zirconium oxychloride octahydrate (ZrOCl 2 ·8H 2 O) and potassium acetate (CH 3 COOK) in methanol. The polymeric structures and the rheological behaviors of the sols with different molar ratios of ZrOCl 2 ·8H 2 O/CH 3 COOK are different and would affect the spinnability and stability significantly. Herein, the polymeric structures and rheological behaviors of the PEZ sols with the molar ratios of 1:1, 1:1.5, 1:1.8 and 1:2 were investigated by Fourier transform infrared (FT-IR), 1 H nuclear magnetic resonance spectrum ( 1 H-NMR), thermogravimetry and differential thermal analysis (TG/DTA) and rheological measurements. The results showed the carboxyl group acted as a chelating ligand instead of bidentate ligand, and the water molecule coordinated to Zr 4+ was deprotoned gradually with the decrease of the molecular ratios. The different polymeric structures lead to a different rheological behaviors of the sols. It is divided into three types, the Newton fluid with a low viscosity produced by the charged linear polymeric structures, the shear thinning fluid with a high viscosity produced by the three-dimensional polymeric structures and the shear thinning fluids with a proper viscosity produced by the linear twining polymeric structures. Through the experimental guidance, we successfully synthesized a sol with suitable viscosity and stability, and used it to fabricate high quality ZrO 2 fibers.
研究领域:
材料科学
·
无机化学
·
高分子化学
·
纤维工程
·
溶胶-凝胶技术
✓ 已验证
DOI
高影响因子
JOURNAL OF POWER SOURCES
·
2017
·
IF 6.395
Zhiliang Chen,Guang Yang,Xiaolu Zheng,Hongwei Lei,Cong Chen,Junjie Ma,Hao Wang,Guojia Fang
Perovskite solar cells have developed rapidly in recent years as the third generation solar cells. In spite of the great improvement achieved, there still exist some issues such as undesired hysteresis and indispensable high temperature process. In this work, bulk heterojunction perovskite-phenyl-C 61 -butyric acid methyl ester solar cells have been prepared to diminish hysteresis using a facile two step spin-coating method. Furthermore, high quality tin oxide films are fabricated using pulse laser deposition technique at room temperature without any annealing procedure. The as fabricated tin oxide film is successfully applied in bulk heterojunction perovskite solar cells as a hole blocking layer. Bulk heterojunction devices based on room temperature tin oxide exhibit almost hysteresis-free characteristics with power conversion efficiency of 17.29% and 14.0% on rigid and flexible substrates , respectively.
研究领域:
材料科学
·
光伏技术
·
纳米材料
·
能源材料
·
半导体器件
·
薄膜制备
✓ 已验证
DOI
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2017
·Vol. 134
·期 35
·45258
·
IF 1.86
Jie Shen,Jian-wu Sun,Yang Hu,Cheng-you Kan
Polysiloxane/polyacrylate (PSi/PA) core/shell latexes are fabricated, and the particle morphology, the film structure, as well as the properties of the latex films are investigated by comparing with blend latexes, and the relationship between structure and property is proposed. Results indicate that the structure and property of the latex films heavily depend on the particle morphology. The sea–island latex films with uniform distribution of PSi phases can be formed from the PSi/PA core/shell latexes, and with the mass ratio from 1:1 to 1:4, their tensile strength and elongation at break are close to the pure PA latex film, while the elastic recovery and water vapor permeability improve notably. It is found that the phase segregation occurs in the blend latex films, and although the blend latex films provide better water vapor breathability, their mechanical properties sacrifice obviously. Therefore, the various properties must be balanced for practical applications and the core/shell latexes are competitive for meeting the balanced requirements. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 45258.
研究领域:
高分子科学
·
材料化学
·
功能材料
·
胶体与界面化学
·
薄膜材料
✓ 已验证
DOI
高影响因子
Energy & Environmental Materials
·
2020
·Vol. 3
·期 4
·529-534
·
IF 0
Yanyou Yin,Yu Zhang,Nannan Liu,Lishuang Fan,Naiqing Zhang
Transitional metal phosphides (TMPs) anode materials usually have large volume change and weak diffusion kinetics, leading to poor cycle stability. Combining TMPs with conductive carbon matrix has been widely used to boost sodium storage. However, it still needs to make efforts in the rational and facile design of nano/micro-structural TMPs/carbon hybrid anode material. Herein, a MOFs-derived strategy is developed to synthesize porous yolk–shell MoP/Cu 3 P@carbon microcages (MoP/Cu 3 P@C) through in situ and confined phosphidation reaction as a high-performance sodium-ion batteries anode. This yolk–shell structure can offer adequate internal space to buffer the large volume expansion, shorten diffusion distance, and create more active sites of Na + . Especially, the Cu nanoparticles generated from Cu 3 P have remarkable electronic conductivity of 5.7 × 10 7 S m −1 (the second most conductive metal) to benefit transporting electrons. And the introduction of Mo (MoP has high theoretical capacity of 633 mA h g −1 ) can enhance the reversible capacity of the whole anode material. Therefore, these porous yolk–shell MoP/Cu 3 P@carbon microcages possess excellent reversible capacity of 307.8 mA h g −1 at 1.0 A g −1 and extraordinary cycle stability of 132.1 mA h g −1 at 5.0 A g −1 even after 6000 cycles.
研究领域:
材料科学
·
电化学
·
纳米能源
·
储能技术
·
无机功能材料
✓ 已验证
DOI
Small
·
2021
·Vol. 18
·期 5
·2104460
·
IF 13.281
Yanan Huang,Jianguo Si,Shuai Lin,Hongyan Lv,Wenhai Song,Ranran Zhang,Xuan Luo,Wenjian Lu,Xuebin Zhu,Yuping Sun
3D anisotropic functional properties (such as magnetic, electrical, thermal, and optical properties, etc.) in a single material are not only beneficial to the multipurpose of a material, but also helpful to enrich the regulatory dimensionality of functional materials. Herein, a colossal 3D electrical anisotropy of layered MAB-phase MoAlB single crystal is introduced and dissected. Using high-temperature metal-solution method, high-quality MoAlB single crystals are obtained and a surprisingly strong out-of-plane ( σ a / σ b = 1.43 × 10 5 , at 2 K) and in-plane ( σ a / σ c = 12.12, at 2 K) electrical anisotropies are first observed. After a series of experimental and theoretical investigations, it is demonstrated that the 3D anisotropic crystal structure and chemical bond of MoAlB result in its 3D anisotropic phonon vibration and electronic structure, influence the corresponding electron-electron as well as electron-phonon interactions, and finally give rise to its colossal 3D anisotropy of electrical conductivity. This work experimentally and theoretically proves MoAlB single crystal possessing the 3D anisotropies of crystal structure, chemical bond, phonon vibration, electronic structure, and electrical transport, but also provides a promising platform for the future design of functionalized electronic devices as well as synthesis of new and large-sized in-plane anisotropic 2D material (MoBene).
研究领域:
凝聚态物理
·
材料科学
·
功能材料
·
晶体化学
·
纳米电子学
·
低维材料
✓ 已验证
DOI
高影响因子
RSC Advances
·
2017
·Vol. 7
·期 64
·40462-40469
·
IF 3.108
Yingxia Wang,Zhong Xiong,Yanzhi Xia
In this work, novel branched palladium–gold (PdAu) bimetallic nanowires supported on graphene (PdAu/graphene) were fabricated at relatively low temperatures for the first time by a one-pot co-reduction method with the aid of poly(diallyldimethyl-ammonium chloride). The structural characteristics of PdAu/graphene were confirmed by X-ray diffraction, X-ray photoelectron spectroscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy, high-angle annular dark-field scanning transmission electron microscopy and element mapping observations. The electrochemical properties of the PdAu/graphene were characterised by cyclic voltammetry and chronoamperometry (CA) in the formic acid oxidation reaction. Compared with a commercial Pd/C catalyst, the PdAu/graphene catalyst prepared in this work exhibited enhanced electrocatalytic activity including a higher oxidation current density, enhanced CO tolerance, and a more negative onset potential. Moreover, CA analyses demonstrated that PdAu/graphene shows higher stability than the Pd/C catalyst. The PdAu/graphene catalyst exhibited higher activity and strong poisoning resistance, which could be attributed to its special branched structure from PdAu nanowires.
研究领域:
纳米催化
·
电化学
·
材料科学
·
能源化学
·
表面科学
·
电分析化学
✓ 已验证
DOI
高影响因子
CHINESE JOURNAL OF CATALYSIS
·
2022
·Vol. 43
·期 9
·2443-2452
·
IF 12.92
Yaojia Cheng,Haoqiang Song,Jingkun Yu,Jiangwei Chang,Geoffrey I.N. Waterhouse,Zhiyong Tang,Bai Yang,Siyu Lu
The sluggish kinetics of oxygen reduction reaction (ORR) hinders the commercialization of Zn-air batteries (ZABs). Manipulating the electronic structure of electrocatalysts to optimize the adsorption energy of oxygen-containing intermediates during the 4e − ORR offers a practical route toward improving ORR kinetics. Herein, we designed a novel ORR electrocatalyst containing Co single atoms and nanoparticles supported by carbon dots-derived carbon nanoflowers (Co SAs/NPs CNF). Co SAs/NPs CNF possessed a very high ORR activity ( E 1/2 of the Co SAs/NPs CNF catalyst is 0.83 V ( vs. RHE)), and outstanding catalytic performance and stability when used as the air-electrode catalyst in rechargeable ZABs (152.32 mW cm −2 , 1000.58 mWh g Zn −1 , and over 1300 cycles at a current density of 5 mA cm −2 ). The Co SAs and Co NPs cooperated to improve electron and proton transfer processes during ORR. Theoretical calculations revealed that the presence of adjacent Co NPs optimized the electronic structure of the isolated Co-N 4 sites, significantly lowering the energy barriers for the rate-determining step in ORR (adsorption of *OOH) and thereby delivering outstanding ORR performance. This work reveals that the combination of supported single-atom sites and metal nanoparticles can be highly beneficial for ORR electrocatalysis , outperforming catalysts containing only Co SAs or Co NPs.
研究领域:
电化学
·
纳米材料科学
·
能源化学
·
催化化学
·
先进电池技术
✓ 已验证
DOI
高影响因子
PARTICLE & PARTICLE SYSTEMS CHARACTERIZATION
·
2020
·Vol. 37
·期 2
·1900445
·
IF 3.099
Artem Yakovliev,Tymish Y. Ohulchanskyy,Roman Ziniuk,Tereza Dias,Xin Wang,Hao Xu,Guanying Chen,Junle Qu,Anderson S. L. Gomes
In this work, the application of near infrared (NIR)-emitting NaYbF 4 :1%Tm 3+ @NaLuF 4 :30%Nd 3+ core–shell nanoparticles is reported for noninvasive probing and monitoring the temperature during photopolymerization of dental materials. When excited at 808 nm, the synthesized nanoparticles emit NIR photoluminescence (PL) with two distinctive peaks at 865 and 980 nm which correspond to radiative transitions from the doped Nd 3+ and Yb 3+ ions, respectively. Luminescence intensity ratio between these two bands is found to vary with temperature due to temperature-dependent electronic excitation energy transfer between Nd 3+ and Yb 3+ ions at the core/shell interface. This finding allows luminescence ratiometric evaluation of the in situ temperature during photopolymerization of resin cement (doped with nanoparticles) in a veneer placement procedure. In addition, the NIR emission also enables PL imaging of the distribution of the adhesive under the veneer. The results highlight that rare-earth ions–doped nanoparticles with both excitation and emission in the NIR spectral range are advantageous for both PL-based nanothermometry and imaging due to the reduced attenuation of NIR light by dental ceramics.
研究领域:
生物医学工程
·
牙体牙髓病学
·
纳米医学
·
光学成像
·
生物材料
✓ 已验证
DOI
高影响因子
Science China-Materials
·
2018
·Vol. 62
·期 4
·519-526
·
IF 4.318
Zhang Busheng,Lei Yan,Qi Ruijuan,Yu Haili,Yang Xiaogang,Cai Tuo,Zheng Zhi
Both bismuth and copper are non-toxic and earth-abundant elements suitable for lead-free halide perovskite-like photovoltaic devices. Here, we report a highly facile route for in-situ producing copper-bismuth-iodide (CuBiI 4 ) thin films directly on ITO substrate at room temperature, by utilizing a Bi-Cu alloy layer as precursor. X-ray diffraction and transmission electron microscopy (TEM) results verified the formation of well crystallized CuBiI 4 thin films with [222] orientation. The transient photovoltage (TPV) analysis revealed that the CuBiI 4 is an n-type semiconductor with a suitable band gap of ~1.81 eV, preferable to photoelectric conversion compared with CH 3 NH 3 PbI 3 . It is very interesting that the subsequent spin-coating process of the classical Spiro-MeOTAD organic solution with TBP and acetonitrile resulted in a dense and smooth CuBiI 4 :Spiro-MeOTAD bulk-heterojunction film. The preliminarily fabricated simple sandwich structures of ITO/CuBiI 4 :Spiro-MeOTAD/Au hybrid solar cell devices displayed efficient photovoltaic performance with the PCE up to 1.119% of the best sample. The room temperature direct metal surface elemental reaction (DMSER) method may provide a new insight for all-inorganic lead free perovskite-like A a B b X x compounds and high performance photovoltaic devices.
研究领域:
材料科学
·
光伏技术
·
无机化学
·
半导体物理
·
能源材料
✓ 已验证
DOI
高影响因子
Journal of Tissue Engineering and Regenerative Medicine
·
2022
·Vol. 16
·期 12
·1163-1172
·
IF 4.323
Yulu Liu,Ya Liu,Zhiyuan Bai,Dongfang Wang,Yiyang Xu,Qian Li
With the prevalence of cardiovascular diseases, developing cardiovascular supplements is becoming increasingly urgent. The ability of cells to rapidly adhere and proliferate to achieve endothelialization is extremely important for vascular grafts. In this work, we electrospun polytetrafluoroethylene (PTFE) nanofibrous membranes and used induced crystallization to manufacture poly(ε-caprolactone) (PCL) shish-kebab microstructures on PTFE nanofibers to overcome the inertness of PTFE, and promote cell adhesion and proliferation. PCL lamella periodically grew on the surface of PTFE nanofibers yielding a hierarchical structure, which improved the biocompatibility and mechanical properties of the PTFE nanofibrous membrane. The deposition of PCL lamella improved the hydrophilicity of electrospun PTFE nanofibers membrane, leading to good cell proliferation and adhesion. Also, due to the surface inertness of the substrate material PTFE, this PTFE/PCL composite film has good anti-platelet adhesion properties. Furthermore, cell proliferation could be regulated by controlling the integrity of the PCL crystal network. The vascular patch showed similar mechanical properties to natural blood vessels, providing a new strategy for vascular tissue engineering.
研究领域:
生物医学工程
·
组织工程
·
材料科学
·
心血管病学
·
再生医学
·
生物材料
·
纳米技术
✓ 已验证
DOI
高影响因子
MATERIALS & DESIGN
·
2015
·
IF 3.501
Heng Zhang,Libo Wang,Qiang Chen,Ping Li,Aiguo Zhou,Xinxin Cao,Qianku Hu
In this study, a Ti 3 C 2 nanomaterial and Ti 3 C 2 /UHMWPE (ultrahigh molecular weight polyethylene) nanocomposites were prepared. The morphology, structure and properties of the Ti 3 C 2 /UHMWPE nanocomposites were investigated. The results indicate that Ti 3 C 2 nanoparticle can improve the thermal and mechanical properties of UHMWPE . The crystallinity and hardness of the Ti 3 C 2 /UHMWPE nanocomposite increase with the content of Ti 3 C 2 . The tensile and breaking strengths of the nanocomposites are enhanced with increasing Ti 3 C 2 content and reach maximum values at a mass fraction of 0.75 wt.%. The creep performance is enhanced after the addition of Ti 3 C 2 to the matrix. The frictional properties of the Ti 3 C 2 /UHMWPE composites were investigated using a pin-on-disc tester. The Ti 3 C 2 /UHMWPE composites exhibited a better friction-reducing performance compared with pure UHMWPE . The addition of Ti 3 C 2 can reduce the adhesive wear and plow friction, which results in the worn surfaces of the Ti 3 C 2 /UHMWPE composite being smoother than those of pure UHMWPE.
研究领域:
材料科学
·
高分子材料
·
摩擦学
·
纳米复合材料
·
机械工程
✓ 已验证
DOI
高影响因子
Journal of Materials Chemistry A
·
2013
·Vol. 1
·期 35
·10184-10192
·
IF 0
Jie Shao,Xuezhang Xiao,Lixin Chen,Xiulin Fan,Leyuan Han,Shouquan Li,Hongwei Ge,Qidong Wang
A system of 2LiH–MgB2 and its hydrogenated 2LiBH4–MgH2 is an attractive candidate for hydrogen storage. However, its hydriding–dehydriding kinetics have to be further improved for practical application. In the present work, three kinds of Ni–B nanoparticles with different crystalline states and particle sizes were prepared by wet-chemical reduction and mechanochemical methods, and then introduced into a 2LiH–MgB2 composite for catalytic enhancement. The catalytic roles of Ni–B nanoparticles on the hydriding–dehydriding properties were investigated systematically. The results show that all of the Ni–B nanoparticles can significantly enhance the hydriding–dehydriding kinetics of the 2LiH–MgB2 composite, resulting in no incubation period for the formation of MgB2 during dehydrogenation. The more disordered the amorphous structure and the smaller sized the Ni–B particles are, the better the catalytic effect that is obtained. Microstructure analyses clearly reveal the formation of the MgNi3B2 phase in the dehydriding process, which acts as the nucleation agent for MgB2 formation determined by an edge-to-edge model. Directly doping with Ni–B nanoparticles in the 2LiH–MgB2 system shows a higher hydrogen desorption capacity of 9.4 wt% and obtains a better catalytic efficiency than doping with NiCl2.
研究领域:
材料科学
·
储能材料
·
无机化学
·
纳米催化
·
氢储存
✓ 已验证
DOI
危险品化学品经营许可证（带存储）