TALANTA
·
2024
·
IF 5.6
Yueshou Zhang,Lichun Yang,Yulin Xu,Haiting Ren,Shi Yin,Yan Sun,Yongjun Hu
Rapid and sensitive detection of phosphate is of great significance for ensuring water safety and preventing eutrophication. In this study, we prepared Au@PATP@Ag NRs core-shell structures using 4-aminothiophenol (PATP) as an internal standard signal molecule to enhance the stability of the SERS signal. Based on the phosphate-induced decomposition of ZIF-8 and the protective effect of ZIF-8 on the internal Au@PATP@Ag NRs, a phosphate SERS sensor (Au@PATP@Ag@ZIF-8) with high sensitivity, selectivity and stability was designed. This method exhibited a good linear range of 0.1–125 μM and a detection limit of 30 nM. Furthermore, the developed sensor (Au@PATP@Ag@ZIF-8) was effectively applied to assess PO 4 3− in tap water samples, achieving recoveries between 97.44% and 104.54%. With its simple, fast and sensitive features, this method of phosphate detection in water provides a direction for the research and practical application of phosphate detection.
研究领域:
环境科学
·
分析化学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CERAMICS INTERNATIONAL
·
2024
·
IF 5.1
Chaochen Chen,Fang Lei,Ying Shi,Jianjun Xie,Lei Zhang,Lingcong Fan
The surface metallization of Si 3 N 4 ceramics with the Ag–Cu conductive paste containing CuO was systematically investigated. The interfacial reactions between CuO and Si 3 N 4 promoted the surface metallization of the ceramic substrate in an argon atmosphere. The effects of Ag and Cu relative contents on the evolution of the thick film surface morphology were studied. The electrical properties and tensile strength of composite ceramic substrates were enhanced through the generation of Ag–Cu eutectic solution within the thick film layer. The effect of brazing time on the properties of Ag–Cu/Si 3 N 4 composite ceramic substrates was investigated. Mechanical testing and scanning electron microscopy (SEM) were used to analyze the interface tensile strength of the Ag–Cu/Si 3 N 4 composite substrates and the morphology of the Ag–Cu film, and the bonding mechanism of the composite ceramic substrate was studied. When the sample was brazed at 800 °C for 20 min, the maximum tensile strength of 23.6 MPa between the Ag–Cu film and ceramic substrate was obtained, the lowest resistivity of 6.22 μΩ•cm was obtained. The bonding interface between thick film layer and the ceramic substrate formed the Ag–Cu mechanical structure was benefit for improving the comprehensive performance of the Cu/Si 3 N 4 composite ceramic substrate.
研究领域:
材料科学
·
陶瓷工程
✓ 已验证
产品关联
DOI
高影响因子
WATER RESEARCH
·
2024
·
IF 11.4
Yuyang Yao,Yueyue Lu,Jingwen Xu,Jiacheng Yu,Liang Guo,Heda Ding,Jian Li,Junbin Liao,Edison Huixiang Ang,Zhenlu Shen,Jiangnan Shen
Membrane-contamination during electrodialysis (ED) process is still a non-negligible challenge, while irreversible consumption and unsustainability have become the main bottlenecks limiting the improvement of anion exchange membranes (AEMs) anti-contamination activity. Here, we introduce a novel approach to design AEMs by chemically assembling 4-pyndinepropanol with bromomethylated poly(2,6-dimethyl-1,4-phenylene oxide) (BPPO) in an electrochromic-inspired process. Subsequently, the co-mingled TiO 2 @Ag nanosheet with the casting-solution were sprayed onto the surface of the substrate membrane to create a micrometer-thick interfacial layer. The addition of Ag nanoparticles (NPs) enhances the active sites of TiO 2 , resulting in stronger local surface plasmon resonance (LSPR) effects and reducing its energy band gap limitation (From 3.11 to 2.63 eV). Post-electrodialysis electrochromic AEMs incorporating TiO 2 @Ag exhibit synergistic enhancement of sunlight absorption, effectively suppressing photogenerated carrier binding and promoting migration. These resultant-membranes demonstrate significantly improved bacterial inhibition properties (42.0-fold increase for E. coli ) and degradation activity (7.59-fold increase for rhodamine B) compared to pure TiO 2 membranes. Importantly, they maintain photocatalytic activity without compromising salt-separation performance or stability, as the spraying process utilizes the same substrate materials. This approach to rational design and regulation of anti-contamination AEMs offers new insights into the collaborative synergy of color-changing and photocatalytic materials.
研究领域:
材料科学
·
环境工程
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Nanoscale
·
2022
·Vol. 14
·期 41
·15340-15347
·
IF 8.307
Lin Tian,Zijun Huang,Weidan Na,Yuanyuan Liu,Shuai Wang,Yu He,Wenjing Cheng,Tianzi Huang,Zhao Li,Tongxiang Li
The biocatalytic design of nanomaterials with enzyme-like activity is considered a reliable and promising toolkit for the generation of diagnostic agents in complex biological microenvironments. However, the preparation of nanomaterials while maintaining a high catalytic activity in tumor cells (pH 6.0–6.5) poses a prominent challenge. Herein, we constructed a biomimetic enzyme-trigged dual-mode system with colorimetry at 652 nm and photothermal biosensors to detect glutathione based on hollow MnO2-nanosheet-decorated Ag nanowires (Ag@MnO2) as an oxidase-like nanozyme. As expected, Ag@MnO2 catalyzed the oxidation of 3,3′,5,5′-tetramethylbenzidine (TMB) in the absence of H2O2, leading to a blue-colored oxidized TMB (oxTMB) that displayed oxidase-like activity in pH 6.0. Interestingly, the portable dual-mode colorimetry and photothermal method for GSH was developed based on the redox reaction between GSH and oxTMB. This detection method exhibited a wide linear range of 0.1–55 μM for GSH with a low detection limit of 0.08 μM. This work highlights a new insight into nanotechnology by taking advantage of biomimetic design in biological analysis.
研究领域:
生物化学
·
纳米医学
·
诊断学
✓ 已验证
DOI
高影响因子
Fuel Cells
·
2019
·Vol. 19
·期 2
·169-176
·
IF 2.33
T. Fu,S. Zhang,J. Huang,D. Cai,J. Li,J. Zhao
Ag-Pt alloy material is one of the most potential candidates to improve the catalytic activity of Pt-based catalyst toward the oxygen reduction reaction (ORR), which can reduce the dosage of the high-cost metal Pt used in the cathode of fuel cells. But it is hard to synthesis Ag-Pt alloy with nanosize in an easy and cheap way. In this study, the Ag-Pt alloy nanoparticles supported on carbon (Ag-Pt/C) with different Ag at.% were prepared by a facile one-pot approach with low costs. The XRD, TEM and XPS measurements were applied to verify the alloy structure of Ag-Pt nanoparticles. These Ag-Pt/C samples showed enhanced mass activities and catalytic stabilities for the ORR, which was up to two times higher than that of the commercial Pt/C catalyst at 0.9 V ( vs. reversible hydrogen electrode). Furthermore, the membrane electrode assembly (MEA) made from the Ag-Pt/C catalyst also showed a higher power density in H 2 -O 2 fuel cell test compared to the MEA made from the commercial Pt catalyst. These enhancements are attributed to the higher utilization of Pt and the regulated oxygen adsorption energy of Pt in the surface, which was confirmed using the density function theory calculation.
研究领域:
材料科学
·
电化学
·
能源技术
✓ 已验证
产品关联
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2019
·
IF 3.45
Zhongyang Wang,Peitao Xie,Guohua Fan,Zidong Zhang,Yao Liu,Qilin Gu,Runhua Fan
Epsilon-negative behavior in metamaterials has attracted increasing attention recently. In this work, excessively percolating BaTiO 3 /Ag composites were synthesized by an in-situ preparation method to achieve negative permittivity. The epsilon-negative behavior is explained by low-frequency plasma oscillation of free electrons, which can be well fitted by the Drude model. Moreover, the negative permittivity of composites can be tuned by adjusting the content of randomly distributed Ag particles. The ac conductivity of excessively percolating BaTiO 3 /Ag composites shows a typical metal-like behavior. Furthermore, the investigation of reactance reveals that the inductive character derived from the conductive network is the main contributor to negative permittivity, as confirmed by the equivalent circuit analysis. This work provides a theoretical recipe for designing negative permittivity, supplements the family of metamaterials, and would further facilitate the practical applications of epsilon-negative materials in electromagnetic devices.
研究领域:
材料科学
·
电磁学
✓ 已验证
产品关联
DOI
高影响因子
Nano Energy
·
2024
·
IF 16.8
Wenjie Deng,Long Yuan,Peng Wan,Junlu Sun,Caixia Kan,Daning Shi,Chunxiang Xu,Junfeng Lu
In the complex human body fluids, neurotransmitters such as dopamine (DA) play a significant role in regulating physiological functions, thereby impacting the normal functioning of biological activities. Hence, employing a rapid and non-destructive analytical technique for precise measurement of these molecules is crucial. Here, a novel piezoelectric-enhanced ZnO/Ag microcavity SERS substrate was designed, enabling ultra-sensitive and instantaneous detection of DA molecules. This substrate achieves exceptional trace detection performance, with a detection limit for Rhodamine 6 G (R6G) molecules as low as 5×10 −13 M and a EF of 1.05×10 11 , DA can be accurately identified even at exceedingly low concentrations, demonstrating outstanding capabilities in trace detection. This innovative structure not only represents a breakthrough in the rapid trace detection of neurotransmitters but also introduces new avenues for research and diagnostics in fields such as precision medicine, neuroscience , and pharmaceutical development.
研究领域:
生物传感器
·
神经科学
·
分子诊断
·
精准医学
·
药物分析
·
纳米生物技术
✓ 已验证
DOI
高影响因子
Discover Nano
·
2025
·Vol. 20
·期 1
·1-17
·
IF 4.5
Hu Dongmei,Wu Qing,Yang Yujun,Wang Yan,Li Yanhao,Chen Haixiang,Tang Liang,Mao Xiang,Wang Zhenyu
Metal-based nanoenzymes with excellent biocompatibility and stable chemical properties are an effective antimicrobial agent against bacterial resistance due to their radical-mediated catalysis. In this work, due to the pH of most bacterial infection sites being close to neutral, targeting the problem of Fe 3 O 4 @Ag difficulty in maintaining the catalytic activity of nanoenzymes in neutral environments, we prepare a novel multifunctional Fe 3 O 4 @Ag@ indocyanine green/adenosine triphosphate peroxidase nanoenzymes for synergistic antibacterial activity. ICG (Indocyanine Green) and ATP (Adenosine triphosphate) are adsorbed on the surface of Fe 3 O 4 @Ag through electrostatic adsorption to form its structure. The cell viability remained above 90%, indicating its good biocompatibility. By complexing ATP with nanoenzymes to participate in single electron transfer and binding with Fe (II), ATP promotes the sudden release of hydroxyl radical (·OH) from the system, successfully transferring Fe 3 O 4 @Ag the peroxidase activity of nanoenzymes extends to neutral pH. By utilizing ICG as a photosensitizer and a sonosensitizer, under the combined treatment of near-infrared light and ultrasound, the photodynamic therapy (PDT)/photothermal therapy (PTT)/sonodynamic therapy (SDT) functions can be achieved, achieving multifunctional synergistic antibacterial effects. In a neutral environment, its bactericidal efficiency against Gram negative ( Escherichia coli ) and Gram positive ( Staphylococcus aureus ) is 99.9% and 99.7%, respectively, providing a new multi-mode synergistic antibacterial strategy for bacterial infections. Graphical abstract Metal based nanoenzymes with excellent biocompatibility and stable chemical properties are an effective antimicrobial agent against bacterial resistance due to their radical mediated catalysis. The prepared multifunctional Fe 3 O 4 @Ag@ICG/ATP exhibit peroxidase nanoenzymes perform ance for synergistic antibacterial activity. ICG and ATP are adsorbed on the surface of Fe 3 O 4 @Ag through electrostatic adsorption to form its structure
研究领域:
生物医学工程
·
纳米医学
·
抗菌材料研究
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF PHYSICS D-APPLIED PHYSICS
·
2023
·Vol. 56
·期 5
·055302
·
IF 3.4
Yangtao Yuan,Lei Gao,Yuanyuan Luo,Jiajia Mi,Zhenyu Cao,Man Wang,Jianping Shi,Guotao Duan
Surface-enhanced Raman scattering technique has become a powerful tool for detecting trace targets in the field of food-safety. However, it is a challenge to regulate the hot spots of the detection substrate and its interaction with target molecules for the enhancement of SERS activity. Herein, we reported the high performance SERS substrate based on Ag@ZIF-67 nanocomposite with sugar-coated haws like structure. It was found that the coverage of ZIF-67 particles on the surface of Ag nanowires can adjust the SERS ability of detection substrate. Compared with pure Ag nanowires, functionalized Ag nanowires exhibit outstanding SERS activity with good stability and uniformity. The detection limit of crystal violet and thiram can be as low as 10−10 M and 10−8 M, respectively. After 35 d, the SERS activity remains basically unchanged. Furthermore, it also has excellent SERS response to 5 \times 10−5 M thiram residues on the surface of vegetables. Such high SERS activity can be attributed to the enrichment and screening molecular effect of porous ZIF-67 nanoparticles, and the surface plasmon resonance effect of Ag nanowires. This work provides a simple strategy for the on-site detection of pesticide residues in the actual applications.
研究领域:
分析化学
·
食品安全
·
材料科学
✓ 已验证
DOI
高影响因子
OPTICAL MATERIALS
·
2020
·
IF 2.779
Mengfan Liang,Qiang Lei,Shuhong Sun,Yan Zhu
In this article, the effect of the distinctiveness and arrangements on the plasmonic resonance of Cu–Ag system were studied by finite element method , and the effect of morphologies on the plasmonic properties of Cu@Ag core@shell NPs and Cu–Ag corn-cob liked NPs was investigated by experiment. For Cu@Ag core-shell structure, as the fixed thickness of Ag-shell at 10 nm, the dipole plasmon resonance gradually blue-shifts with increasing the radius of Cu core, and as the fixed radius of Cu-core at 50 nm, the feature peak shows a red-shift and broadening with increasing the thickness of Ag shell. For Cu–Ag corn-cob structure, the feature for different Ag coverage are similar to each other and most of the them follow the blue-shifted tendency with the increase the degree of Ag-coverage. Furthermore, as the regular-shaped structure increases (form trigonal to spherical), the plasmon resonance gradually blue shifts, and finally, we use two parameters to describe the different idealized Cu–Ag structure: separation, exterior contact, intersection and core@shell. The combined information from our simulation and experiment will give guidelines for choosing adequate particles when aiming at certain plasmonic properties.
研究领域:
纳米材料科学
·
光学
✓ 已验证
产品关联
DOI
高影响因子
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
·
2019
·
IF 3.375
Feifan Chen,Bo Zhang,Weihao Cai,Nengquan Fan,Yongkang Lu,Luxia Yin,ZeKai Zhang,Wensheng Ning
Ag/SiO2–Al2O3 aerogel composites with different molar ratio of Si to Al were prepared by the sol–gel synthesis followed by drying under atmospheric pressure and then characterized by XRD, FT-IR, BET, SEM, XRF, TG-DTG, and Py-FTIR, respectively. The effect of doping Al on their physicochemical properties and adsorption desulfurization performance was investigated in comparison with Ag/SiO2. The incorporation of Al in Ag/SiO2 resulted in a gradual decrease in the specific surface area, an increase in the actual content of Ag, and an appearance of Brönsted acid centers. The actual content of Ag in Ag/SiO2–Al2O3-n increased first and then decreased with the increase in Al content. Doping Al in Ag/SiO2 led to an improvement in the adsorption capacity and the adsorptive selectivity for thiophene at the presence of toluene and cyclohexene, as well as the solvent washing regeneration performance, attributed to the adsorption of thiophenics on Ag/SiO2–Al2O3-n by π-complexation of Ag(I) and the acid–base interaction of Lewis and Brönsted centers with thiophenics simultaneously, and the increase in the actual content of Ag in the adsorbents. Ag/SiO2–Al2O3-100 had the largest adsorption capacity for thiophene and benzothiophene, 12.2 mg of S/gads (0.57 mmol of S/mmol of (Ag + Al)) and 17.7 mg of S/gads (0.53 mmol of S/mmol of (Ag + Al)), respectively.
研究领域:
材料科学
·
化学工程
✓ 已验证
DOI
高影响因子
ACS Sensors
·
2025
·
IF 9.1
Haowei Ma,Hongjian Zhang,Mingtao Zhu,Yong Zhang
In recent years, research on piezoelectric pressure sensing has attracted worldwide attention, as eagerly demanded by the development of wearable electronics. However, the current piezoelectric pressure sensors are unable to detect forces along different bending directions with a high resolution, thus limiting their applications in some typical scenarios. To address this issue, this study designed a novel composite structure with ZnO nanorods loaded with Ag nanoparticles (ZnONRs@Ag) and then embedded in highly oriented polyvinylidene fluoride (PVDF) fibers. Due to its unique orientation, the pressure sensor exhibits anisotropy, accurately identifying forces along distinct bending directions (such as perpendicular, parallel, or twisting). The optimized PVDF/ZnONRs@Ag device presents the peak power density of 308.1 nW cm–2 and a sensitivity as high as 0.52 V N–1 and remains stable after 7000 cycles at 1.4 Hz. The highly oriented piezoelectric devices are utilized to monitor various human movements and harvest energy from them. This research provides a viable method for manufacturing self-powered directional pressure sensors, contributing to the advancement of wearable technology and energy harvesting applications.
研究领域:
材料科学
·
电子工程
·
纳米技术
✓ 已验证
产品关联
DOI
PubMed
高影响因子
危险品化学品经营许可证（带存储）