JOURNAL OF SOLUTION CHEMISTRY
·
2026
·
IF 1.3
Xu Saiyuan,Guo Yujun,Wu Yibin,Chen Bin,Xu Yingjie
This study aims to develop and characterize a novel mixed system composed of sodium phenoxide (NaOPh) and a deep eutectic solvent (DES) formed from 1-ethyl-3-methylimidazole chloride ([Emim]Cl) and ethylene glycol (EG), in order to address the phase separation issue commonly encountered in aqueous phenoxide solutions during CO₂ absorption—caused by the generation of phenol. The physicochemical properties, CO 2 absorption performance and absorption mechanism of the NaOPh/DES mixed system were investigated. The results indicate that the density, viscosity, and CO 2 absorption capacity of the studied NaOPh/DES mixed systems increase with NaOPh content. The NaOPh1.0/DES system exhibits the best absorption performance of these systems, with a CO 2 absorption capacity of 2.10 mol‧kg −1 at 313.15 K and 0.1 MPa. DFT calculations reveal that the Na + from NaOPh, the O–H group from EG, and the Cl − from [Emim] Cl can form a stable four-membered ring. This weakens the electrostatic interaction between Na + and [PhO] − , promoting the dissociation of the NaOPh and facilitating the chemical reaction between the “free” [PhO]⁻ and CO 2 to form carbonates. This mechanism is confirmed by FT-IR and 13 C NMR spectra. Using [Emim]Cl–EG DES as a solvent to dissolve NaOPh leverages the reactivity of [PhO] − with CO 2 for efficient absorption, while effectively avoiding phase separation. This expands the application of phenoxide-based systems in CO₂ capture.
✓ 已验证
DOI
高影响因子
Light-Science & Applications
·
2026
·Vol. 15
·期 1
·135
·
IF 24
Maimaitizi Hujiabudula,Ågren Hans,Chen Guanying
The development of pure-blue perovskite light-emitting diodes (PeLEDs) still lags behind that of green and red-emitting PeLEDs. Mixed halide (Br/Cl) perovskite nanocrystals (PeNCs) are commonly employed for blue emission but suffer from halide vacancies and ion migration. Here, we present a passivation strategy using the multifunctional fluorinated phosphonic acid molecule (1H,1H,2H,2H-heptadecafluorodec-1-yl)phosphonic acid (HFPA), which possesses active functional groups that improve the stability and electroluminescence performance of CsPb(Br/Cl) 3 NCs. The HFPA molecule is shown to interact with uncoordinated Pb 2+ on the PeNC surface through the phosphonate groups, concurrently establishing hydrogen bonds with adjacent halide ions. Moreover, the presence of fluorine atoms promotes ionic bond formation with the halide octahedra, thereby stabilizing the octahedral structure. The fabricated PeNC-LEDs exhibited a spectrally stable pure-blue emission peak at 467 nm, achieving a significantly improved external quantum efficiency (14.8%, 9-fold higher), maximum luminance (1052 cd·m -2 , 10-fold higher), and half-life (342 s, 13-fold higher) compared to the device fabricated with unmodified CsPb(Br/Cl) 3 NCs. Furthermore, the effective passivation of surface vacancies and stabilization of halogen ions by the HFPA molecules successfully suppressed ion migration in the PeNC-LEDs, thereby significantly enhancing the stability of the device.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
APPLIED SURFACE SCIENCE
·
2021
·
IF 6.707
Xiaomin Song,Qi Huang,Bo Jin,Rufang Peng
To improve the encapsulation of GO to CL-20, PEI was utilized as a linker bridge to self-assemble into composite CL-20/PEI/GO in this study. The self-assembly was in-depth characterized, including Zeta potential, SEM, DLS, XPS, Raman spectra, HPLC and power-XRD. The possible self-assembled mechanism was also proposed, which indicates the electrostatic interaction introduced by PEI should be responsible for the self-assembly. The performance of a self-assembled composite was characterized by BAM and DSC analysis. And the results indicate the enhanced interaction promotes GO more efficiently encapsulate CL-20 and improve the safety of the energetic material. Therefore, this work demonstrates a novel and facile method to solve the deprived interaction and corresponding weak desensitization between desensitizer and energetic material.
✓ 已验证
DOI
高影响因子
CARBON
·
2026
·
IF 11.6
Yanan Zheng,Hao Xu,Xinyi Hou,Xuefeng Yan,Xiaohui Jiang,Liangmin Yu
Heteroatom doping, by synergistically regulating defect concentration, dielectric loss factors, and conductive behavior, enables precise tailoring of the electromagnetic response in carbon-based materials. In this study, lunar-like nitrogen (N), chlorine (Cl) co-doped porous carbon microspheres (N, Cl-PCMs) were fabricated via a hydrothermal–pyrolysis method using a self-synthesized N, Cl-containing compound as the dopant. By adjusting the doping level, controllable morphology and tunable electromagnetic responses were achieved. The heteroatoms create heterogeneous interfaces and defects that act as efficient polarization sites, thereby promoting polarization relaxation while optimizing the conductive network for improved conductive loss. Multiple attenuation mechanisms synergistically enable optimized impedance matching and efficient electromagnetic attenuation. The optimal N, Cl-PCMs-2 exhibits remarkable electromagnetic wave absorption (EMWA) performance, with a minimum reflection loss (RL min ) of −56.00 dB at 2.99 mm and an effective absorption bandwidth (EAB) widened to 5.44 GHz at 2.22 mm. Radar cross-section (RCS) simulations further demonstrated a maximum reduction of 27.45 dB m 2 at 0°, confirming its promise for multiband electromagnetic stealth. This work provides new insight into the multiscale structure of biomass-derived carbons for green, high-performance electromagnetic absorption absorbers.
✓ 已验证
产品关联
DOI
高影响因子
Defence Technology
·
2026
·
IF 6.4
Yanpeng Lyu,Fan Liao,Ligang Zhang,Handong Shi,Guoqiang He,Xintong Han,Jiaoyang Liu,Chuanhao Xu,Chongwei An
High energy and low sensitivity are generally mutually exclusive in energetic materials, and precise regulation of the microstructure is an effective strategy to balance these properties. In this study, CL-20/DAAF composite microspheres with various microstructures—including core-shell, hollow, porous, and irregular hollow structures—were fabricated using a tubular continuous-flow device combined with the principles of phase separation and recrystallization. The influence of the binder on the morphology and properties was also investigated. The results demonstrated that, compared with raw CL-20, the composite microspheres exhibited significantly reduced sensitivity and improved mechanical properties. Specifically, the impact energy increased from 1.75 J to 7.50 J, and the friction sensitivity threshold increased from 108 N to 168 N. The average compressive stress and compressive strain of the PBX charges were enhanced by 22.89%–108.19% and 25.75%–50.28%, respectively, with the 2.5% NC + 2.5% F 2602 composite binder delivering the optimal mechanical performance. In ignition experiments, hollow microspheres showed the highest combustion efficiency, while core-shell microspheres released energy more steadily, achieving a maximum combustion duration of 2175 ms. Theoretical calculations indicated that this composite binder system possesses a higher theoretical detonation velocity. The study confirms that adjusting the microstructure can effectively enhance the combustion and mechanical properties of composite microspheres, thereby balancing high energy with low sensitivity. The tubular continuous-flow self-assembly technology, integrated with phase separation and recrystallization principles, provides a feasible pathway for the controllable construction of composite microsphere architectures and offers a reference for the design and fabrication of other energetic composite microspheres.
✓ 已验证
产品关联
DOI
高影响因子
GREEN CHEMISTRY
·
2026
·
IF 10.6
Yang Li,Guoen Zhang,Chuanshun Feng,Feng Lin,Huan Ye,Wenqi Wei,Qicheng Zhang,Wenchao Peng,Xiaobin Fan
Electrocatalytic conversion of polyethylene terephthalate (PET) plastic waste into formate coupled with hydrogen generation represents a sustainable pathway for plastic upcycling. Herein, a nickel sulfide catalyst (Mo,Cl-Ni3S2) is developed for efficient and stable ethylene glycol (PET monomer) oxidation reaction (EGOR) through a Mo and Cl co-doping strategy. The optimized catalyst Mo,Cl-Ni3S2 possesses a high formate Faradaic efficiency of 94.0% at 1.55 V vs. RHE. Moreover, it maintains 83.3% of its initial activity after 95 hours continuous operation at an industrial current density of 300 mA/cm2. Experiment and theoretical simulations demonstrate Mo and Cl co-doping optimizes the electronic structure of Ni3S2 by upshifting the Ni d-band center and facilitates the in situ structure reconstruction during EGOR. Finally, an integrated acidification-precipitation-recrystallization strategy is proposed to separate and recover terephthalic acid (TPA) and potassium formate. This method offers a holistic approach for upcycling PET waste into value-added chemicals and hydrogen.
✓ 已验证
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2026
·
IF 19.7
Hongyang Zhao,Sihan Fan,Yulong Xiang,Junfeng Li,Yue Li,Xuelu Wang,Xinjuan Liu,Likun Pan
Asymmetric Ni-N-Cl sites are built by NH 4 Cl vaporization. • Ni-N-Cl overcomes the kinetic challenges and delivers excellent CO 2 reduction performance. • XAFS, DFT and CW-ODMR reveal the asymmetric coordination mechanism. • Cl coordination creates electron-rich Ni centers with shifted d-band. • Ni-N-Cl achieves 86.2% CO Faradaic efficiency and enables durable Zn-CO 2 batteries for 53 h operation. Electrocatalytic CO 2 reduction reaction to value-added chemicals represents a promising pathway for sustainable carbon utilization. However, the symmetric coordination environment of conventional M-N 4 single atom sites restricts electronic structure regulation and limits their intrinsic activity. Herein, we develop an asymmetric Ni-N-Cl coordination structure synthesized via high-temperature NH 4 Cl vaporization assisted strategy. This Cl-mediated asymmetric coordination induces a distinct charge redistribution, generates an electron enriched Ni center and an upward shift of the d-band center closer to the Fermi level. These intrinsic modulations significantly facilitate CO 2 activation and proton transfer to the *COOH, thereby lowering the reaction energy barrier. Consequently, the Ni-N-Cl catalyst achieves a CO Faradaic efficiency of 99.67% at -0.7 V vs. RHE in H cell and 17 h long term stability at -100 mA cm -2 in flow cell. Furthermore, this catalyst delivers a peak power density of 1.62 mW cm -2 and a durability of 53 h. This study provides a general methodology for the rational design of asymmetric single atom catalysts through orbital engineering for high-efficiency energy storage technologies. Download: Download high-res image (199KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
Catalysts
·
2023
·Vol. 13
·期 4
·751
·
IF 3.9
Jikun Chen,Yan Gu,Shishi Xu,Yunxiang Zhang,Zhe Zhang,Lin Shi,Zhichao Mu,Chenliang Zhou,Jiali Zhang,Qinfang Zhang
Developing efficient photocatalyst for the photoreduction of CO2and degradation of organic pollutants is an effective alternative to address increasingly serious energy problems and environmental pollution. Herein, the isostructural Sillén–Aurivillius oxyhalides, Bi7Fe2Ti2O17X (X = Cl, Br, and I; BFTOX), are fabricated for CO2reduction and degradation of organic pollutants for the first time. Density functional theory (DFT) calculations show that the valence band maximum (VBM) of BFTOC and BFTOB is contributed by the dispersive 2porbitals of O-atoms, providing the narrow band gap (Eg) and possibly the stability against self-decomposition deactivation. The photocatalytic activities of BFTOX are strongly affected by the halogens (Cl, Br, and I), namely, the BFTOCl sample displays outstanding activity improvement (3.74 μmol·g−1·h−1) for photocatalytic performance. This is mainly attributed to the high separation of charge carriers, small optical band gap, and extended optical absorption. This work focuses on affording a reference to develop efficient and stable photocatalysts from Sillén-Aurivillius layered oxyhalide materials.Keywords:Sillén–Aurivillius;Bi7Fe2Ti2O17X;photocatalyst;degradation;CO2reduction
✓ 已验证
产品关联
DOI
高影响因子
Advanced Optical Materials
·
2023
·Vol. 11
·期 9
·2203028
·
IF 9
Guozhen Li,Qiwen Pan,Zhihao Zhou,Ranran Gu,Hao Zhang,Xiongjian Huang,Guoping Dong,Xiudi Xiao
Perovskite CsPbX 3 (X = Cl, Br, I) nanocrystals with advantages of high quantum yield, narrow emission peaks, and tunable fluorescence are considered as the next generation of light-emitting sources. However, fluorescence degradation due to the poor stability of perovskite nanocrystals in moisture, high temperature, and illumination remains one of the greatest challenges in their further development. In this work, a fully dense coating strategy is proposed to improve the overall stability of perovskite nanocrystals, especially under high-density laser irradiation. A mesoporous silica SiO 2 layer is introduced to construct a stable coating for isolating the perovskite from external environment. To eliminate the pores of the CsPbX 3 @SiO 2 , an inorganic glass is also employed via solution-combustion technique to generate a fully compact encapsulation for further stability promotion. The as-prepared nanocrystal-in-glass composite exhibits efficient and stable fluorescence performance in luminous efficiency, chromaticity, and long-term reliability in the conditions of thermal shock, humidity, and blue laser irradiation. With the integration of red/green/blue emitting nanocrystals, the color gamut of the white laser lighting source covers 134% of the National Television Standards Committee standard, providing exciting opportunity for high performance laser-driven white light generation.
✓ 已验证
产品关联
DOI
高影响因子
TRANSACTIONS OF TIANJIN UNIVERSITY
·
2022
·Vol. 29
·期 2
·110-119
·
IF 0
Zhang Zongping,Xu Jie,Zhang Dongmei,Ma Huijuan,Li Tao,Xiao Ting,Pei Cunyuan,Ni Shibing
The safe operating voltage and low volume variation of Li 3 VO 4 (LVO) make it an ideal anode material for lithium (Li)-ion batteries. However, the insufficient understanding of the inner storage mechanism hinders the design of LVO-based electrodes. Herein, we investigate, for the first time, the Li-ion storage activity in LVO via Cl doping. Moreover, N-doped C coating was simultaneously achieved in the Cl doping process, resulting in synergistically improved reaction kinetics. As a result, the as-prepared Cl-doped Li 3 VO 4 coated with N-doped C (Cl-LVO@NC) electrodes deliver a discharge capacity of 884.1 mAh/g after 200 cycles at 0.2 A/g, which is the highest among all of the LVO-based electrodes. The Cl-LVO@NC electrodes also exhibit high-capacity retention of 331.1 mAh/g at 8.0 A/g and full capacity recovery after 5 periods of rate testing over 400 cycles. After 5000 cycles at 4.0 A/g, the discharge capacity can be maintained at 423.2 mAh/g, which is superior to most LVO-based electrodes. The Li-ion storage activity in LVO via Cl doping and significant improvement in the high-rate Li-ion storage reported in this work can be used as references for the design of advanced LVO-based electrodes for high-power applications.
✓ 已验证
产品关联
DOI
CHEMICAL ENGINEERING JOURNAL
·
2023
·
IF 15.1
Le Ma,Xiansheng Li,Xuehan Chen,Jingyu Li,Pengfei Liu,Changting Wei,Qingshan Ma,Leimeng Xu,Wenhua Zhang,Jizhong Song
Mixed halide CsPb(Br/Cl) 3 quantum dots (QDs) exhibit fine tunable blue light and narrow photoluminescence (PL) full-width at half-maximum (FWHM), which has attracted significant attention as a promising candidate to realize a new generation of blue light technology. However, the introduction of Cl − makes it very easy to be eroded by water in the environment, which will lead to deep-level defects and degrade the luminescence and stability of QDs. Here, we propose to introduce tetra- n -octylammonium oxalate (TOAOxa) to improve the water-resistance stability and exciton recombination of CsPb(Br/Cl) 3 QDs and QD-based light-emitting diodes (QLEDs). The oxalate ion (Oxa 2− ) of TOAOxa could form strong interaction with undercoordinated Pb 2+ on CsPb(Br/Cl) 3 QD surface, which was confirmed by FTIR and XPS analysis. Oxa 2− passivated QDs (Oxa-QDs) exhibited improved photoluminescence quantum yield (PLQY) and enhanced water-resistance stability compared to pristine QDs. For example, after soaking in water–acetone co-solvent for 1 h, Oxa-QDs can maintain the initial cubic morphology and 43.9% of initial PL intensity, while the morphology and luminescence of pristine QDs are almost damaged. Based on the above concept, the Oxa-QD-based QLED presented a maximum external quantum efficiency (EQE) of 4.0%, and operational lifetime (T 50 ) of 84 s, which was a 5-fold enhancement in EQE, and 7-fold enhancement in stability compared to pristine QLED, respectively. Besides, the Oxa-QD-based QLED exhibits better stability in high-humidity air. To sum up, the Oxa 2− passivation strategy has significantly improved the efficiency and water-resistant stability of QDs and devices and would rapidly promote the development of blue-emitting QDs.
✓ 已验证
产品关联
DOI
高影响因子
MATERIALS RESEARCH BULLETIN
·
2022
·
IF 5.6
Mu Yang,Qilin Dai,Aiwei Tang,Feng Teng,Hong-shang Peng
Current chloride-bromine mixed perovskite quantum dots (PQDs) suffered from low luminescence efficiency and instability due to migration-nature of ionic species and high defect density. To tackle these challenges, herein a novel type of CH 3 NH 3 Pb(Cl/Br) 3 PQDs (Cl/Br-PQDs) were synthesized via a two-step method. Briefly, pristine silane-capped Br-PQDs were prepared, followed by anion exchange using oleylammonium chloride (OAm-Cl) and in-situ formation of silica shell. The optimal feeding ratio of Cl/Br was determined to be 1:1, which yielded colloidal Cl/Br-PQDs possessing a strong 464-nm emission, a high photoluminescence quantum yield of 94.6% and ultrahigh stability. The high quantum yield was attributed to efficient defects passivation by doped Cl − ions and silica-shell-locked OAm + ligands, whilst the high stability was to silica-shell-restricted migration of halogen ions. Such a combinational strategy of anion exchange and in-situ growth of silica shell may provide an effective solution for synthesis of mixed PQDs with high quality.
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）