INORGANIC CHEMISTRY
·
2025
·
IF 4.7
Xuan Miao,Xiao Bai,Peng Zhang,Bolong Wang,Shuyan Wang,Yuzhu Yang,Zenggang Lin,Sixia Li,Binbin Wang,Weisheng Liu
Incorporating two-phase heterojunctions with matching band structures represents a promising strategy for developing photocatalysts with enhanced efficiency. This work prefers a novel approach that employs a template-assisted strategy based on a porous structured UCCN@CeO2 0D/2D S-scheme heterojunction. The proposed method aims to improve photocatalytic activity by harnessing the synergistic effects of monodispersed CeO2 nanoparticles and ultrathin N-defect CN nanosheets. The catalyst demonstrates a remarkable photocatalytic hydrogen evolution rate, reaching an impressive value of 5.59 mmol h–1 g–1 when subjected to simulated sunlight irradiation. Furthermore, the photocatalyst maintains a substantial activity level, yielding 2.35 mmol h–1 g–1 under visible light (≥400 nm). The significant improvement in the photocatalytic performance of the UCCN@CeO2 catalyst is attributed to the unique structural design and effective charge separation facilitated by the S-scheme mechanism. Kelvin probe force microscopy, theoretical calculations, and femtosecond transient absorption spectroscopy affirm the efficient charge transportation across the catalyst interface. Additionally, electron spin resonance spectroscopy measurements further support the charge transfer pathway in the S-scheme. This research presents an innovative approach for designing and developing CN-based catalysts featuring S-scheme heterojunctions, aiming to improve their efficiency and practical use in photocatalytic applications.
研究领域:
材料科学
·
催化化学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHINESE JOURNAL OF CATALYSIS
·
2021
·
IF 8.271
Qinqin Liu,Xudong He,Jinjun Peng,Xiaohui Yu,Hua Tang,Jun Zhang
Extended light absorption and dynamic charge separation are vital factors that determine the effectiveness of photocatalysts. In this study, a nonmetallic plasmonic S-scheme photocatalyst was fabricated by loading 1D plasmonic W 18 O 49 nanowires onto 2D g-C 3 N 4 nanosheets . W 18 O 49 nanowires play the dual role of a light absorption antenna—that extends light adsorption—and a hot electron donor—that assists the water reduction reaction in a wider light spectrum range. Moreover, S-scheme charge transfer resulting from the matching bandgaps of W 18 O 49 and g-C 3 N 4 can lead to strong redox capability and high migration speed of the photoinduced charges. Consequently, in this study, W 18 O 49 /g-C 3 N 4 hybrids exhibited higher photocatalytic H 2 generation than that of pristine g-C 3 N 4 under light irradiation of 420–550 nm. Furthermore, the H 2 production rate of the best-performing W 18 O 49 /g-C 3 N 4 hybrid was 41.5 μmol·g −1 ·h −1 upon exposure to monochromatic light at 550 nm, whereas pure g-C 3 N 4 showed negligible activity. This study promotes novel and environmentally friendly hot-electron-assisted S-scheme photocatalysts for the broad-spectrum utilization of solar light.
研究领域:
材料科学
·
环境科学
✓ 已验证
DOI
高影响因子
POLYMER
·
2018
·
IF 3.483
Jin Han,Cheng Chen,Qingquan Xue,Yaochen Zheng,Shu Tian,Zhixiong Liu,Jieze Shen,Mingqiang Zhong
A catalyst-free and thermal-induced S→O acetyl migration (SOAM) reaction was occasionally found and used to fabricate the polythiol corrosion inhibitor . The route to prepare the polythiols was free of catalyst and side products. Only intramolecular migration process existed, while intermolecular migration was not found. Temperature-dependent 1 H NMR experiment showed the conversion rate of the SOAM reaction was 83% at 160 °C. Further heating at higher temperature or for longer reaction time, the conversion rate did not increase. It was speculated that there was equilibrium between two reversible migrations. The prepared polythiol inhibitor contains a large amount of latent thiol groups after the SOAM reaction process. The strong Cu S bonds immediately formed and made the polythiol chains firmly anchored on the copper surface when the copper metal was coated with the polythiols. Also S S bond formation reaction leads to dense crosslinking and film formation. Raman spectrum and SEM were used to characterized the protective film. A smooth and defect-free film with thickness of 1.9 μm was achieved when the copper sample was immersed in the polythiol solution for 60 min. The corrosion performance of the film is obtained by potential and impedance measurements and Tafel curves by immersing in a 3.5 wt% NaCl solution. All of the coated samples exhibited significantly lower corrosion rates than the bare copper sample, and the corrosion rate decreased as the immersion time increased. The inhibtion efficiency of the polythiol inhibitor was up to 99.3%. Neutral salt spray experiments indicated that the polythiol films provided excellent protection for over one week. The polythiols were also very stable in storage and have application in designing various polyacrylate polythiols resins.
研究领域:
材料化学
·
防腐蚀工程
·
高分子化学
✓ 已验证
产品关联
DOI
高影响因子
Catalysts
·
2021
·Vol. 11
·期 9
·1130
·
IF 4.146
Zhuangzhuang Zhang,Yuanyuan Zhang,Xuanxuan Han,Li Guo,Danjun Wang,Kangle Lv
The novel 2D/2D S-scheme heterostructure of BiOCl nanosheets coupled with CaIn2S4nanosheets (CaIn2S4/BiOCl-SOVs), which contains surface oxygen vacancies (SOVs), has been successfully prepared by high-temperature calcination combined with a solvothermal synthetic strategy. Under visible-light irradiation, the apparent rate constant (Kapp/mim−1) for phenol degradation on the 1 wt% CaIn2S4/BiOCl-SOVs photocatalyst is about 32.8 times higher than that of pure BiOCl. The superior performance was attributed to the synergistic effect between the SOVs, CaIn2S4, and BiOCl, which can effectively narrow the bandgap and accelerate the interfacial charge separation of CaIn2S4/BiOCl-SOVs heterojunctions. Subsequently, it significantly promotes the generation of superoxide radicals (O2−), hydroxyl radicals, and h+, which participate in the photodegradation process of phenol. The catalyst still maintained a relatively high activity after repeated tests as a demonstration of its photostability. This work successfully proposed an efficient method to design a new 2D/2D S-scheme heterostructure with SOVs as possible photocatalysts in the field of environmental remediation.
研究领域:
环境科学
·
材料科学
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2024
·
IF 13.3
Yachao Xu,Zhong Zhou,Peng Yu,Huiquan Gu,Zixu Zhang,Ying Wang
Efficient reduction of U(VI) to U(IV) during seawater uranium extraction remains a challenge. Here, cerium dioxide quantum dots were bonded to the surface of indium zinc sulfide (ZIS) to form ZIS composite cerium dioxide quantum dots (ZIS/QDs-Ce). The oxygen vacancies are able to activate the Zn-O bonds at the ZIS and QDs-Ce interfaces, thus enabling the constructed S-scheme heterojunction to show great potential in facilitating the separation and transfer of photogenerated carriers. ZIS/QDs-Ce exhibited high anti-bio-pollution activity by generating biotoxic free radical reactive oxygen species (ROS). The photo-induced reduction of uranium by ZIS/QDs-Ce in 10 ppm uranium spiked simulated seawater reached 99.6 %. Oxygen vacancies cause distortions in the crystal field, and the Zn-O bond activation process triggers the movement of ZIS/QDs-Ce from the singlet low-spin state to the stable triplet state, resulting in free-carrier trapping centers and optimized electronic energy band structures. ZIS/QD-Ce has superior uranium extraction capabilities and is highly recommended for uranium extraction from seawater.
研究领域:
材料科学
·
环境科学
·
核能工程
✓ 已验证
产品关联
DOI
高影响因子
NEW JOURNAL OF CHEMISTRY
·
2024
·Vol. 48
·期 36
·16107-16118
·
IF 2.7
Zhoufeng Wang,Bolin Wang,Yingying Liu,Xiubo Long,Wenlong Yao
A series of linear block polymers and random polymers were synthesized by interfacial polycondensation using two bisphenols with similar structures, bisphenol S (BPS) and bisphenol A (BPA), and terephthaloyl chloride and isophthaloyl chloride. Random polymers and block polymers with the expected topology were structurally characterized by 1H NMR, FTIR, GPC, WAXD, and Raman spectroscopy. The results demonstrated that there was no significant difference in the thermal stability of the block and random polyarylates, which was due to the fact that the covalent bonds of the linked monomers did not change substantially, and the bond energies were the same. However, due to the alteration of the molecular sequence structure, the block polymer exhibited a lower glass transition temperature, a pronounced melting peak, and better solubility. With physical cross-linking points consisting of microcrystalline phases formed by the relatively regular molecular chain structure, the block polyarylates exhibited a higher modulus of elasticity than the random polyarylates. This illustrated that it is possible to prepare new functional polyarylates without changing the monomer composition, but only by manipulating the reaction process.
研究领域:
材料科学
·
高分子化学
✓ 已验证
产品关联
DOI
高影响因子
INORGANIC CHEMISTRY
·
2022
·
IF 5.436
Mingyang Liu,Zhongwen Ouyang,Xiaochen Liu,Jiaojiao Cao,Tongtong Xiao,Zhengcai Xia,Zhenxing Wang
Isolated large-spin Heisenberg antiferromagnetic uniform chain is quite rare. Here, we have successfully synthesized an ideal one-dimensional (1D) S = 5/2 linear-chain antiferromagnet [C2NH8]3[Fe(SO4)3], which crystallizes in a trigonal lattice with the space group R3c. A broad maximum at Tmax = 18 K is observed in the magnetic susceptibility curve. Notably, no long-range magnetic ordering is observed down to 2 K even if the material has a large Curie–Weiss temperature of θCW = −25.5 K. High-field magnetization at 2 K shows a linear increase until saturation at 30 T, and a high-field electron spin resonance (ESR) reveals the absence of a zero-field spin gap. The intrachain interaction J and interchain interaction J′ are determined. Quite a small ratio of J′/J < 2.5 × 10–3 suggests that [C2NH8]3[Fe(SO4)3] behaves as an ideal 1D uniform linear-chain antiferromagnet, in which the magnetic ordering is prevented by the extremely small interchain interaction and quantum fluctuation even for a classical spin of S = 5/2.
研究领域:
物理学
·
材料科学
·
磁学
✓ 已验证
DOI
高影响因子
Catalysts
·
2019
·Vol. 9
·期 2
·114
·
IF 3.444
Ke Yu,Yan Lin,Jinchen Fan,Qiaoxia Li,Penghui Shi,Qunjie Xu,Yulin Min
Ethanol oxidation reaction (EOR) is an important electrode reaction in ethanol fuel cells. However, there are many problems with commercial ethanol oxidation electrocatalysts today, such as poor durability, poor anti-CO poisoning ability, and low selectivity for C–C bond cleavage. Therefore, it is very meaningful to develop a high-performance EOR catalyst. Herein, we designed ternary N, S, and P-doped hollow carbon spheres (C–N,P,S) from polyphosphazene (PCCP) as Pd supports for EOR. Using SiO2spheres as the templates, the PCCP was first coated on the surfaces of SiO2spheres by in situ polymerization. Through high-temperature pyrolysis and hydrofluoric acid-etching, the hollow PCCP has a large surface area and porous structure. After loading Pd nanoparticles (NPs), the Pd/C–N, P, S catalysts with Pd NPs decorated on the surfaces of C–N, P, S can achieve a high mass peak current density of 1686 mA mgPd−1, which was 2.8 times greater than that of Pd/C. Meanwhile, the Pd/C–N, P, S catalyst also shows a better stability than that of Pd/C after a durability test of 3600s.
研究领域:
材料科学
·
电化学
✓ 已验证
DOI
高影响因子
CHINESE JOURNAL OF CATALYSIS
·
2020
·
IF 6.146
Jinjun Peng,Jun Shen,Xiaohui Yu,Hua Tang,Zulfiqar,Qinqin Liu
Plasmonic nonmetal semiconductors with localized surface plasmon resonance (LSPR) effects possess extended light-response ranges and can act as highly efficient H 2 generation photocatalysts. Herein, an LSPR-enhanced 0D/2D CdS/MoO 3− x heterojunction has been synthesized by the growth of 0D CdS nanoparticles on 2D plasmonic MoO 3− x elliptical nanosheets via a simple coprecipitation method. Taking advantage of the LSPR effect of the MoO 3− x elliptical nanosheets, the light absorption of the CdS/MoO 3− x heterojunction was extended from 600 nm to the near-infrared region (1400 nm). Furthermore, the introduction of 2D plasmonic MoO 3− x elliptical nanosheets not only provided a platform for the growth of CdS nanoparticles, but also contributed to the construction of an LSPR-enhanced S-scheme structure due to the interface between the MoO 3− x and CdS, accelerating the separation of light-induced electrons and holes. Therefore, the CdS/MoO 3− x heterojunction exhibited higher photocatalytic H 2 generation activity than pristine CdS under visible light irradiation, including under 420, 450, 550, and 650 nm monochromic light, as well as improved photo-corrosion performance.
研究领域:
材料科学
·
光催化
✓ 已验证
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2024
·
IF 8.1
Xiao Liu,Yanjun Zhang,Wuxia Zhang,Gang Cheng,Fan Tian,Wei Li,Jinyan Xiong
Solar-driven photocatalytic hydrogen production from water splitting holds significant potential in addressing the energy crisis and environmental pollution. However, rapid recombination of photogenerated carriers and insufficient surface catalytic reaction kinetics hinder the photocatalytic process. Constructing the catalytic systems with multi-channel charge-separation can effectively alleviate those issues. In this work, ternary PdO@TiO 2 -Cu 2 O composites have been synthesized through precursor calcination and low-temperature reduction, where PdO and Cu 2 O nanoparticles couple with the TiO 2 nanorods. Comparing to single TiO 2 , binary PdO@TiO 2 and TiO 2 -Cu 2 O, the PdO@TiO 2 -Cu 2 O hybrid exhibits enhanced photocatalytic hydrogen production performance (5831μmol g -1 h −1 ), with a hydrogen production rate more than three times that of single TiO 2 . Based on the band structures of TiO 2 and Cu 2 O, along with the photochemical/electrochemical, in-situ EPR, Photoluminescence (PL) tests, and work function calculations, the formation of an S-scheme heterojunction at the TiO 2 -Cu 2 O interface under light illumination facilitates the recombination of electrons in the conduction band (CB) of TiO 2 with holes in the valence band (VB) of Cu 2 O. In this regard, the established built-in electric field significantly accelerates the transfer of photogenerated charges while preserving their respective strong oxidation and reduction capabilities. Meanwhile, the introduction of PdO enriches the holes and further enhances the rate of charge separation. This S-scheme heterojunction with directional charge transfer and oxidation cocatalyst collectively form multi-channels of charge separation, optimizing charge migration and enabling efficient hydrogen production, thus improving the photocatalytic capability of pristine TiO 2 . This study provides a rational approach to construct efficient S-scheme heterojunction/oxidation cocatalyst multi-component catalytic systems for water splitting into hydrogen.
研究领域:
材料科学
·
环境科学
·
能源科学
✓ 已验证
DOI
高影响因子
POLYMER COMPOSITES
·
2025
·
IF 4.7
Jiye Jia,Shijie Chen,Haifeng Tian,Dong Wang,Feng Yang,Pei Feng,Cijun Shuai
The low photogenerated charge carriers and quick complex annihilation of titanium dioxide (TiO 2 )/rGO composite leading to an unsatisfactory photocatalysis antibacterial effect limit its application in the bone scaffold. Herein, graphitic carbon nitride (g-C 3 N 4 ) was assembled with TiO 2 /rGO via a solvothermal method for enhancing the photocatalysis antibacterial properties of poly (lactic acid) (PLLA) bone scaffold prepared via selective laser sintering. The results revealed that g-C 3 N 4 expanded the light absorption range of TiO 2 /rGO from blue-violet light to visible light, resulting in the composites having a narrower band gap and producing more photoinduced charge carriers. More importantly, an S-scheme heterojunction was formed between g-C 3 N 4 and TiO 2 , which promoted the recombination of the electrons in the conduction band of TiO 2 and the holes in the valence band of g-C 3 N 4 . Meanwhile, rGO with excellent electrical conductivity reduced the interfacial charge transfer resistance and enhanced charge transfer efficiency, thus further avoiding the recombination rate of electrons and holes, whether TiO 2 or g-C 3 N 4 , and enhancing the photocatalytic properties. Consequently, the holes in the valence band of TiO 2 and the electrons in the conduction band of g-C 3 N 4 possessed high oxidation and reduction capacity, which oxidized H 2 O and reduced O 2 in the microenvironment, respectively, and generated lots of reactive oxygen species. In vitro antibacterial experiments indicated that the PLLA/TiO 2 /g-C 3 N 4 /rGO scaffold showed a better antibacterial effect, with the bacteriostasis rates of E. coli and S. aureus being 99.1% and 98.9%, respectively. In addition, cell adhesion and fluorescence results indicated that the scaffold had good biocompatibility and could provide a suitable microenvironment for the growth and proliferation of cells.
研究领域:
材料科学
·
生物医学工程
·
抗菌材料研究
✓ 已验证
产品关联
DOI
高影响因子
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
·
2022
·
IF 4.326
Longsheng Pei,Hanlun Yang,Shouhui Chen,Li Wang
The metal–organic framework (MOF) UiO-66-NH2 was synthesized and attached to kenaf stem-derived three-dimensional macroporous carbon (3D-KSC) simultaneously, and then, the isothiocyanate functional group was introduced into UiO-66-NH2 MOFs to prepare UiO-66-NHC(S)NHMe/3D-KSC nanocomposites. The amount of UiO-66-NHC(S)NHMe MOFs on 3D-KSC can be controlled easily by the monomer concentration. There were three adsorption sites (two nitrogen atoms and one sulfur atom) on each structural unit of UiO-66-NHC(S)NHMe for adsorption toward heavy metal ions (HMIs) and well-regulated pores and 3D macropores of 3D-KSC to promote the transfer of HMIs. Therefore, UiO-66-NHC(S)NHMe/3D-KSC nanocomposites can be applied for the removal and electrochemical detection of Cd2+, Pb2+, Cu2+, and Hg2+. The detection limits of Cd2+, Pb2+, Cu2+, and Hg2+ were 0.0125, 0.0124, 0.0111, and 0.0094 μM, respectively. The sensitivities were 879.1, 887.6, 992.5, and 1160.7 μA μM–1 cm–2, respectively. UiO-66-NHC(S)NHMe/3D-KSC showed fine reproducibility and stability as well as strong anti-interference ability. In addition, the HMIs can be removed effectively by UiO-66-NHC(S)NHMe/3D-KSC with the maximum adsorption capacity of 88, 391, 223, and 935 mg·g–1 for Cd2+, Pb2+, Cu2+, and Hg2+, respectively. The results show that UiO-66-NHC(S)NHMe/3D-KSC has great potential for the adsorption and detection of HMIs.
研究领域:
材料科学
·
环境科学
·
分析化学
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）