CHEMICAL ENGINEERING JOURNAL
·
2021
·
IF 13.273
Yang Liu,Xiaoming Zhou,Xue Wang,Gairong Chen,Rong Liu,Yu Ma,Yang Bai,Guohui Yuan
Developing the alternative anode materials that can completely resolve the dendrite concern of Zn metal anodes are desirable for reliable aqueous zinc-ion batteries. However, the sub-optimal charging potentials of reported anodes inevitably cause the discounted output voltage and energy density on a zinc-ion full battery. Herein, it is firstly demonstrated that the hydrated titanic acid (H 2 Ti 3 O 7 ·xH 2 O) can be applied as an ultralow-potential anode for the aqueous zinc-ion full battery. The depressed potential (0.2 V vs. Zn 2+ /Zn) of the H 2 Ti 3 O 7 ·xH 2 O compared to that of reported candidates could significantly enhance the operating voltage level of the zinc-ion full battery. Furthermore, the comprehensive analyses demonstrate that the expanded lattice spacings and interlayer crystal water stimulate Zn 2+ along with H + to jointly insert and extract on the H 2 Ti 3 O 7 ·xH 2 O anode. The low-potential H 2 Ti 3 O 7 ·xH 2 O anode exhibits an impressive cycling performance and coulombic efficiency by virtue of the assistance from interlayer crystal water. The assembled Zn x MnO 2 //H 2 Ti 3 O 7 ·xH 2 O zinc-ion full battery delivers the decent electrochemical performance, especially a high output voltage of over 1 V. This low-potential, high-stable H 2 Ti 3 O 7 ·xH 2 O anode reveals the exceptional potential for aqueous zinc-ion full batteries.
✓ 已验证
DOI
高影响因子
Sensors & Diagnostics
·
2023
·Vol. 2
·期 2
·445-456
·
IF 0
Wen-Xu Zhang,Jing-Shuai Chen,Xing-Pei Liu,Chang-Jie Mao,Bao-Kang Jin
The extreme sensitivity of perovskite nanoparticles to water has seriously hindered their application. At present, all inorganic perovskite nanocrystals (NCs) have received extensive attention due to their excellent photoelectric properties. A highly hydrophilic composite CsPbBr3/TDPA NCs was synthesized in the presence of oleylamine molecules, which greatly enhanced its water stability. The electrochemiluminescence (ECL) intensity and stability of the composites are much higher than those of single CsPbBr3 quantum dots (QDs). For the first time, we have developed a sensor for the specific detection of nitrobenzene using the ECL method. It was found that nitrobenzene could significantly enhance the ECL signal of CsPbBr3/TDPA NCs. The ECL sensor showed a good linear relationship with the concentration of nitrobenzene in the range of 1 mM to 0.1 μM, and the detection limit was as low as 0.05 μM (S/N = 3). This work provides a new idea for the development of nitrobenzene ECL sensors.
✓ 已验证
DOI
Materials Today Communications
·
2021
·
IF 3.383
Slimane Abdous,Mehdi Derradji,Oussama Mehelli,Raouf Belgacemi,Azzedine Khadraoui,Yacine Laichi,Hamza Djerra,Noureddine Ramdani,Wenbin Liu
In this study, three new energetic benzoxazine monomers were synthesized via a one-step Mannich reaction process involving the incorporation of explosophore nitro groups (NO 2 ) in different positions (ortho, meta and para) into the monomer backbone. The molecular structures of the synthesized monomers were confirmed by FTIR, 1 H and 13 CNMR techniques. The curing behavior, thermomechanical properties and the thermal stability were assessed by DSC-TGA analyses. All monomers displayed two exothermic peaks related to the polymerization and degradation steps except 4-NBZ that present the polymerization and the degradation phenomena through one unique exotherm pic. The energetic performances were evaluated by the determination of the heat of combustion using a bomb calorimeter in an oxygen atmosphere. The results indicated that the para position provided the benzoxazine monomers with a high calorific value comparable to that of the nitrocellulose (about 10.401 kJ/g). Meanwhile, the aforementioned monomer was found to ignite at a temperature of about 267 °C. Overall, this study showed that the ease of synthesis of the benzoxazine resins via Mannich reaction can be further extended the energetic field and further researches are undergoing to fully unravel the potential of these exceptional materials.
✓ 已验证
DOI
高影响因子
Nature Communications
·
2020
·Vol. 11
·期 1
·1-7
·
IF 12.121
Yu Fei-Yang,Lang Zhong-Ling,Yin Li-Ying,Feng Kun,Xia Yu-Jian,Tan Hua-Qiao,Zhu Hao-Tian,Zhong Jun,Kang Zhen-Hui,Li Yang-Guang
The oxidized platinum (Pt) can exhibit better electrocatalytic activity than metallic Pt 0 in the hydrogen evolution reaction (HER), which has aroused great interest in exploring the role of oxygen in Pt-based catalysts. Herein, we select two structurally well-defined polyoxometalates Na 5 [H 3 Pt (IV) W 6 O 24 ] (PtW 6 O 24 ) and Na 3 K 5 [Pt (II) 2 (W 5 O 18 ) 2 ] (Pt 2 (W 5 O 18 ) 2 ) as the platinum oxide model to investigate the HER performance. Electrocatalytic experiments show the mass activities of PtW 6 O 24 /C and Pt 2 (W 5 O 18 ) 2 /C are 20.175 A mg −1 and 10.976 A mg −1 at 77 mV, respectively, which are better than that of commercial 20% Pt/C (0.398 A mg −1 ). The in situ synchrotron radiation experiments and DFT calculations suggest that the elongated Pt-O bond acts as the active site during the HER process, which can accelerate the coupling of proton and electron and the rapid release of H 2 . This work complements the knowledge boundary of Pt-based electrocatalytic HER, and suggests another way to update the state-of-the-art electrocatalyst.
✓ 已验证
DOI
高影响因子
RSC Advances
·
2021
·Vol. 11
·期 59
·37631-37642
·
IF 3.361
Kanjun Sun,Fengting Hua,Shuzhen Cui,Yanrong Zhu,Hui Peng,Guofu Ma
A novel asymmetric supercapacitor (ASC) is assembled on the basis of an inerratic hexagonal-like WO3 nanorod bundle as a negative electrode and graphene-like alfalfa-derived porous activated carbon (APAC) as the positive electrode in 1 M H2SO4 aqueous electrolyte. The WO3 nanostructures prepared at pH of 1.6, 1.8, 2.0, 2.5 and 3.0 display hexagonal disc-like, nanorod bundle, inerratic hexagonal-like, sphere-like, and needle-shaped nanorod morphology. WO3-2.0, which was prepared at a pH of 2.0, exhibits high specific capacitance (415.3 F g−1 at 0.5 A g−1). APAC-2, which had the mass ratios of dried alfalfa and ZnCl2 as 1 : 2, showed a 3D porous structure, large surface area (1576.3 m2 g−1), high specific capacitance (262.1 F g−1 at 0.5 A g−1), good cycling stability with 96% of initial specific capacitance after 5000 consecutive cycles. The ASC assembled with WO3-2.0 and APAC-2 exhibits high energy density (27.3 W h kg−1 at a power density of 403.1 W kg−1), as well as good electrochemical stability (82.6% capacitance retention after 5000 cycles). Such outstanding electrochemical behavior implies that the electrode materials are promising for practical energy-storage systems.
✓ 已验证
DOI
高影响因子
Atmospheric Pollution Research
·
2021
·
IF 4.352
Ranran Zhao,Qixing Zhang,Xuezhe Xu,Weixiong Zhao,Hui Yu,Wenjia Wang,Yongming Zhang,Weijun Zhang
As global air pollution aggravates, it urges us to investigate the evolution of atmospheric related emissions. Recently oxidation flow reactor (OFR) has been widely used to simulate the aging of atmospheric related emissions as its excellent performance. In this work, we systematically characterized the SOA formation from α-pinene using a custom-built OFR under different conditions. The particle loss of the OFR was evaluated by particle transmission efficiency, then the effect of O 3 concentration, relative humidity (RH), precursor amounts, OH exposure level, and acidic seed aerosol on SOA formation was investigated. The particle losses of our OFR for particles above 50 nm were very small, which was comparable to or even better than those of previous traditional flow reactors. The formation of SOA particles nearly achieved stability after UV radiation for 15 min. When OH exposure concentration at approximately 0.6 × 10 12 molec cm −3 s, the SOA yield reached the maximum yield of 0.51 and 0.39 in the presence and absence of acidic seed aerosol respectively. The addition of acidic seed aerosol increased both particle number concentration and particle size, resulting in an increase of SOA yield of 1.2–1.5 times at OH exposure concentration ranged from 0.1 × 10 12 to 1.8 × 10 12 molec cm −3 s. The results provided significant guidance for studying the aging of atmospheric related emission under different working conditions by using an OFR.
✓ 已验证
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2019
·
IF 6.361
Sujuan Hu,Baoling Wang,Yinhai Ma,Mengyuan Li,Liting Zhang,Zixuan Huang
In this study, ultrathin two-dimensional (2D) bismuth tungstate (Bi 2 WO 6 ) nanosheets were adopted as a Pt support for photo-assisted electrocatalytic methanol oxidation . Compared with traditional electrocatalytic reactions , the photo-assisted electrocatalytic methanol oxidation reactions of Pt-2D Bi 2 WO 6 nanosheets under simulated solar light and visible light irradiation were improved 5.1 and 2.0 times, respectively. The better photo-assisted electrocatalytic methanol oxidation activities of Pt-Bi 2 WO 6 nanosheets can be attributed to the unique 2D structure that strengthens the oxidation ability of photogenerated holes, reduces the time required for carrier migration, reduces the recombination rate of carriers and provides a larger specific surface area. Additionally, our experimental results reveal the critical factors of photo-assisted enhanced electrocatalytic activities for methanol oxidation and provide a new way to improve the photo-assisted electrocatalytic activities for methanol oxidation.
✓ 已验证
DOI
高影响因子
MACROMOLECULAR RAPID COMMUNICATIONS
·
2024
·Vol. 45
·期 13
·2300737
·
IF 4.2
Ruyue Wang,Xingxing Chen,Yilong Cheng,Zicheng Ding,Xiaoqing Ming,Yanfeng Zhang
Near-infrared (NIR)-triggered shape memory hydrogels with promising mechanical strength hold immense potential in the field of biomedical applications and soft actuators. However, the optical and mechanical properties of currently reported hydrogels usually suffer from limited solubility and dispersion of commonly used photothermal additives in hydrogels, thus restricting their practical implementations. Here,, a set of NIR-responsive shape memory hydrogels synthesized by polyaddition of diisocyanate-terminated poly(ethylene glycol), imidazolidinyl urea (IU), and p -benzoquinone dioxime (BQDO) is reported. The introduction of IU, a hydrogen bond reinforcing factor, significantly enhances the mechanical properties of the hydrogels, allowing for their tunable ranges of the ultimate tensile strength (0.4–2.5 MPa), elongation at break (210–450%), and Young's modulus (190–850 kPa). The unique hydrogels exhibit an intrinsic photothermal effect because of the covalently incorporated photothermal moiety (BQDO), and the photothermal supramolecular hydrogel shows controllable shape memory capabilities characterized by rapid recovery speed and high recovery ratio (>90%). This design provides new possibilities for applying shape memory hydrogels in the field of soft actuators.
✓ 已验证
DOI
高影响因子
ACS Omega
·
2021
·
IF 3.512
Yaqi Gong,Shabbir Mohd,Simei Wu,Shilin Liu,Ying Pei,Xiaogang Luo
Functional modified cellulose microsphere (CMs) materials exhibit great application potential in drug various fields. Here, we designed pH-responsive carboxylated cellulose microspheres (CCMs) by the citric/hydrochloric acid hydrolysis method to enhance oral bioavailability of insulin by a green route. The CMs were high purity cellulose that dissolved and regenerated from a green solvent by the green sol–gel method. The prepared microspheres were characterized by spectroscopic techniques, such as field emission scanning electron microscopy (FE-SEM), Fourier transform infrared spectrum (FT-IR), X-ray diffraction (XPS), etc. The spherical porous structure and carboxylation of cellulose were confirmed by FESEM and FT-IR, respectively. Insulin was loaded into the CCMs by electrostatic interactions, and the insulin release was controlled through ionization of carboxyl groups and proton balance. In vitro insulin release profiles demonstrated the suppression of insulin release in artificial gastric fluid (AGF), while a significant increase at artificial intestinal fluid (AIF) was observed. The insulin release profile was fitted in Korsmeyer–Peppas kinetic model, and insulin release was governed by the Fickian diffusion mechanism. The stability of the secondary structure of insulin was studied by dichroism circular. Excellent biocompatibility and no cytotoxicity of designed CCMs cast them as a potential oral insulin carrier.
✓ 已验证
DOI
高影响因子
ANALYTICAL CHEMISTRY
·
2021
·
IF 6.986
Xiuhong Liao,Zhaochu Hu,Wen Zhang,Yantong Feng,Tao Luo,Zaicong Wang,Ming Li,Keqing Zong,Yongsheng Liu,Shenghong Hu
Using boron as a test analyte, laser ablation (LA) solution sampling multicollector inductively coupled plasma mass spectrometry (MC-ICP-MS) is proposed and validated as a fast method for isotopic analysis in natural liquids and digested samples without any prior purification process. We demonstrated that the solution reference standard can be used as a bracketing standard for in situ δ11B analysis in solids. Based on a sensitivity enhancement of 8- to 9-fold, all testing solutions were diluted in a 5% (v/v) NH3·H2O instead of classical 2% (v/v) HNO3. With a discrete and minimal sample solvent loading by the LA sampling strategy, it produces nearly “dry” plasma conditions that tolerate the sample matrix remarkably. The memory effect, one of the most difficult challenges in boron analysis, was dramatically eliminated with only 15 s wash time; thus, each analysis took less than 100 s. No significant matrix effects were observed for varying 50–100% boron concentrations in the samples and varying 20–60% NH3·H2O matrix used for the dilution, as well as for samples doped with a 1/100 synthetic seawater matrix. The external precision of δ11B measurements in NIST 951a was ± 0.30‰ (2SD). Good agreement with the values described in literature studies was achieved for δ11B measurements in eight geological reference materials, with precisions between 0.4 and 0.7‰ (2SD), confirming the accuracy of the proposed method. The proposed method offers advantages of simple sample preparation, fast analysis, and little use of chemical reagents.
✓ 已验证
DOI
高影响因子
ACS Applied Energy Materials
·
2021
·
IF 6.024
Juemin Yan,Nanlin He,Xiaojun Chen,Chengjian Xiao,LinJie Zhao,Tao Gao
A tetralithium titanium (Li4TiO4) compound is a tritium breeder material that deserves serious consideration for the fusion reactor blanket concept because of its high lithium density. In the current research, an experimental investigation was conducted for the first time to verify the calculated simulation results. First, the lattice parameters, energy band structures, and thermodynamic properties of Li4TiO4 are investigated by means of first-principles density functional theory. Then, the Li4TiO4 powder was synthesized via a solid-state reaction. Subsequently, the samples were systematically characterized using various measurement techniques. The products of the ultraviolet diffuse reflection spectrum, Raman spectroscopy, and laser thermal conductivity are consistent with the theoretical calculations.
✓ 已验证
DOI
高影响因子
BIOMATERIALS
·
2024
·
IF 12.8
Xiuping Cao,Liyang Fang,Yifan Jiang,Tao Zeng,Shiyan Bai,Shiqing Li,Yana Liu,Wukun Zhong,Chunhua Lu,Huanghao Yang
Telomere length plays a crucial role in cellular aging and the risk of diseases. Unlike normal cells, cancer cells can extend their own survival by maintaining telomere stability through telomere maintenance mechanism. Therefore, regulating the lengths of telomeres have emerged as a promising approach for anti-cancer treatment. In this study, we introduce a nanoscale octopus-like structure designed to induce physical entangling of telomere, thereby efficiently triggering telomere dysfunction. The nanoscale octopus, composed of eight-armed PEG (8-arm-PEG), are functionalized with cell penetrating peptide (TAT) to facilitate nuclear entry and are covalently bound to N-Methyl Mesoporphyrin IX (NMM) to target G-quadruplexes (G4s) present in telomeres. The multi-armed configuration of the nanoscale octopus enables targeted binding to multiple G4s, physically disrupting and entangling numerous telomeres, thereby triggering telomere dysfunction. Both in vitro and in vivo experiments indicate that the nanoscale octopus significantly inhibits cancer cell proliferation, induces apoptosis through telomere entanglement, and ultimately suppresses tumor growth. This research offers a novel perspective for the development of innovative anti-cancer interventions and provides potential therapeutic options for targeting telomeres.
✓ 已验证
DOI
PubMed
高影响因子