文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第2869至2880个,产品总数11,257个

切换升序
Co)
APPLIED CATALYSIS B-ENVIRONMENTAL · 2024 · IF 20.2

Sustainable microwave-driven CO2 gasification of plastic waste for high-yield H2 and CO production

Peng Zhang,Cai Liang,Mudi Wu,Yongjie Li,Xiaoping Chen,Daoyin Liu,Jiliang Ma

The efficiency and sustainability for the recycling of plastic wastes into hydrogen was investigated. An integrated microwave-driven valorization of plastic wastes and CO 2 for H 2 and CO production was proposed. Specifically, plastic wastes were decomposed into H 2 and solid carbons, followed by carbon elimination via CO 2 gasification under microwave irradiation. Through the high-throughput screen of catalysts as well as the optimization of key parameters, over 96% hydrogen was converted into H 2 with a yield of 480 mmol∙g −1 H plastic while the carbon conversion and CO 2 conversion reached up to 70% and 53%. The five-cycle successive test displayed extraordinarily high and stable catalytic activity due to the facile elimination of carbon deposition. The application for real-world plastic wastes further demonstrated the efficient microwave-driven CO 2 gasification of plastic wastes into H 2 and CO production as a feasible and sustainable technology toward the waste-to-energy circular economy.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Processes · 2024 ·Vol. 12 ·期 9 ·1912 · IF 2.8

The Synergistic Effect of CeO2 and Micron-Cu Enhances the Hydrogenation of CO2 to CO

Bowen Lu,Huiying Sang,Liang Liu,Zhijian Yu,Yaqin Guo,Yongqing Xu

The catalytic applications of micron Cu powder are limited due to its large particle size and small specific surface area. Modifying micro-Cu powder to achieve a high catalytic performance is a challenge in the application of micron copper. In this work, micro-Cu was used to synthesize a CeO2–Cu catalyst, and the phase composition and surface pore structure were analyzed using XRD, BET, etc. The CO2hydrogenation performance of the CeO2–Cu catalyst was analyzed in comparison with CeO2and Cu, and we found that the CeO2–Cu catalyst exhibited a synergistic effect between Cu and cerium, resulting in a much higher hydrogenation performance at 500 °C than CeO2or Cu alone. H2-TPR and TEM characterization revealed that the CeO2–Cu catalyst formed interfacial interactions with a relatively large Ce–Cu interface, where cerium oxide could promote the reduction of CuO and lower the reduction temperature. Additionally, cerium oxide formed a confinement structure for Cu, and the CeO2–Cu catalyst exhibited a higher oxygen vacancy concentration, thereby promoting the CO2hydrogenation performance. Cu–CeO2interaction provides valuable insights into the catalytic application of micron Cu powder.

CAS / MDL: 10294-41-4
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CORROSION SCIENCE · 2024 · IF 7.4

Thermal cycling behavior of Yb3+-Ce4+ co-doped La2Zr2O7-based TBCs: Experimental and theoretical research

Pengsen Zhao,Haizhong Zheng,Guifa Li,Yongxiang Geng,Yixin Xiao,Hongbo Guo,Gang Wang,Shixian Zhao,Ping Peng

The thermal cycling behavior of Yb 3+ -Ce 4+ -La 2 Zr 2 O 7 /YSZ (LYZCO/YSZ) TBCs was systematically investigated via experiment and first-principles calculation. Results suggest that ceramic grain boundary cracking is the root cause of LYZCO/YSZ TBCs thermal cycle failure. Compared to La 2 Zr 2 O 7 /YSZ TBCs, LYZCO/YSZ TBCs own an outstanding thermal cycle life at 1100 ℃, which is attributed to LYZCO's higher TEC (10.431×10 −6 /K, 1100 ℃) and lower thermal conductivity (1.299 W/(m·K), 1100 ℃). Furthermore, Griffith's separation work of the LYZCO/YSZ interface is merely −0.576 J/m 2 , implying that the LYZCO/YSZ TBCs are particularly prone to cracking at this interface. Weakly bonded La-O is the first site at this interface cracking.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
GREEN CHEMISTRY · 2024 ·Vol. 26 ·期 5 ·2884-2892 · IF 9.3

Sulfur vacancies and a Ni2P co-catalyst synergistically boost the photocatalytic H2 evolution of Zn0.5Cd0.5S

Lindong Xia,Wenzhen Qin,Yu Xie,Yiqiao Wang,Yun Ling

Improving the separation efficiency of photo-generated electron–hole pair is a key issue in the field of photocatalytic hydrogen production. In this work, we successfully improved the efficiency of photo-generated carrier separation using the synergistic action of sulfur (S) vacancies and a Ni2P co-catalyst. Vs-Zn0.5Cd0.5S (Vs-ZCS) with S vacancies was designed and constructed, and Vs-ZCS/Ni2P photocatalysts were prepared with non-precious metal Ni2P as a co-catalyst. Among all the produced materials, Vs-ZCS/Ni2P-5% has a photocatalytic characteristic of 40.81 mmol g−1 h−1, which is 7.88, 3.08 and 3.75 times greater than those of ZCS (5.18 mmol g−1 h−1), Vs-ZCS (13.25 mmol g−1 h−1) and ZCS/Ni2P-5% (10.88 mmol g−1 h−1), respectively. The results of transient photo-current, electrochemical impedance spectroscopy, photoluminescence and time-resolved fluorescence show that the synergistic effect of S vacancies and Ni2P significantly promotes the separation and transfer efficiency of photo-generated carriers, as well as the photocatalytic hydrogen production reaction. Superoxide radicals and electrons are the active species for photocatalytic hydrogen generation, which is confirmed by active species capture tests and EPR. This study presents an innovative approach for developing photocatalysts with low cost and good catalytic performance.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
APPLIED CATALYSIS A-GENERAL · 2025 · IF 4.8

Tailored Co/SBA-15 catalyst for highly efficient hydrodeoxygenation of 5-hydroxymethylfurfural to 2,5-dimethylfuran

Ting Wu,Xiang Zhang,Hongju Liang,Quan Wang,Chun-Ling Liu,Wen-Sheng Dong

The design of highly efficient and cost-effective catalysts for the conversion of biomass-derived 5-hydroxymethylfurfural (5-HMF) into sustainable liquid fuel 2,5-dimethylfuran (DMF) is both important and challenging. In this study, we developed a non-noble Co catalyst supported on SBA-15 (25Co/SBA-15). Our results demonstrate that this catalyst exhibits remarkable efficiency in selectively hydrodeoxygenating 5-HMF to DMF, achieving a DMF yield of 96.3 % with complete conversion of 5-HMF under mild reaction conditions (150 °C, 2.0 MPa H 2 for 2 h). Notably, the productivity rate of DMF reached an exceptional value of 19.1 mmol·gcat −1 ·h −1 , surpassing most previously reported catalysts in literature. Additionally, by utilizing two distinct solvents - N,N-dimethylformamide (N,N-DMF) resulting in a high yield of 2,5-bis(hydroxymethyl)furan (BHMF) and tetrahydrofuran (THF) yielding an even higher yield of DMF - our approach enables facile switching between these two products during hydrogenation over the Co/SBA-15 catalyst. Furthermore, our catalyst demonstrates excellent reusability and can be easily regenerated through calcination in air. The exceptional catalytic performance of the catalyst can be ascribed to the synergistic effect between metallic Co and adjacent Lewis acidic Co 2+ in CoO dispersed on the surface of SBA-15. A dual-site Langmuir–Hinshelwood–Hougen–Watson (LHHW) model was proposed for the hydrodeoxygenating 5-HMF to DMF.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2024 · IF 13.3

Strategic assembly of active phases on Co-Fe bimetallic catalysts for efficient Fischer-Tropsch synthesis

Yunhao Liu,Qingpeng Cheng,Shuaishuai Lyu,Xincheng Li,Song Song,Tong Ding,Ye Tian,Xingang Li

In the realm of Fischer-Tropsch synthesis (FTS), the escalating cost of cobalt has spurred interest in Co-Fe bimetallic catalysts as substitutes for monometallic Co catalysts. Unfortunately, it is difficult to clarify specific functions and interactions of the two phases, as investigating catalysts in a unified dimension of both metal and support is still a challenge. Herein, we realize precise control over synthesizing nitrogen-doped carbon materials supported bimetallic catalysts containing CoFe alloy and Co + Fe 2 C dual active phases. The catalysts are comprehensively characterized to address the above problem by excluding the influence of metal sizes and support properties. Our findings reveal that compared to metallic Co alone and Co + Fe 2 C dual active phases, the Co-Fe interaction in CoFe alloy with electron transfer from Fe to Co optimizes reactant adsorption behaviors through achieving a larger number of strongly adsorbed CO per active site to increase the density of C* adsorbates and a higher surface CO/H 2 ratio to inhibit the hydrogenation of CH x * intermediates for chain termination, as well as an appropriate ability for CO adsorption/ dissociation. These advantages collectively enhance both CO activation and C-C coupling, and consequently, the CoFe/NC (CoFe alloy) catalyst exhibits the superior catalytic performance in the cobalt space–time yield in C 5+ products (3011.2 g C5+  kg Co −1 h −1 ), which surpasses the Co/NC (monometallic Co) and Co + Fe/NC (Co + Fe 2 C dual active phases) by 2.2 times and 2.4 times, respectively. This study serves as a promising route for the development of efficient and low-cost bimetallic catalysts through the strategic arrangement of multiple active phases for various reactions.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
MOLECULES · 2024 ·Vol. 29 ·期 16 ·3843 · IF 4.2

Study on the Gas-Chromic Character of Pd/TiO2 for Fast Room-Temperature CO Detection

Xinbao Li,Kai Sun,Ying Chen,Ye Yuan

As a widely used support, TiO2has often been combined with Pd to form highly sensitive gas-chromic materials. Herein, we prepared a series of Pd/TiO2catalysts with different Pd content (from 0.1 to 5 wt.%) by the impregnation method for their utilization in fast room-temperature CO detection. The detection was simply based on visible color change when the Pd/TiO2was exposed to CO. The sample with 1 wt.% Pd/TiO2presented an excellent CO gasochromic character, associated with a maximum chromatic aberration value of 90 before and after CO exposure. Systematic catalyst characterizations of XPS, FT-IR, CO-TPD, and N2adsorption–desorption and density functional theory calculations for the CO adsorption and charge transfer over the Pd and PdO surfaces were further carried out. It was found that the interaction between CO and the Pd surface was strong, associated with a large adsorption energy of −1.99 eV and charge transfer of 0.196e. The color change was caused by a reduction in Pd2+to metallic Pd0over the Pd/TiO2surface after CO exposure.

CAS / MDL: 13463-67-7 7647-10-1
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
DESIGNED MONOMERS AND POLYMERS · 2024 · IF 1.8

Synthesis and properties of bio-based semi-aromatic heat-resistant copolymer polyamide 5T-co-6T

Xiangcheng Bian,Liqun Ma,Chen Yang,Fuchun Zhang,Shuo Zhang,Yuan Li,Kai Gao,Bingxiao Liu,Zhongqiang Wang

Herein, poly(pentanediamine terephthalamide) (PA5T) homopolymer was synthesized via a salt-forming reaction+solid state polycondensation method using bio-based 1,5-pentanediamine and terephthalic acid as the primary raw materials. To address the issue of its narrower processing window, poly(hexamethylene terephthalamide)(PA6T), which also cannot be melt processed due to the processing window is negative, was introduced into its molecular chain to synthesize poly (pentanediamine/hexanediamine terephthaloyl) (PA5T-co-6T) copolymers. The structures were investigated by Fourier transform infrared spectroscopy (FTIR) and nuclear magnetic resonance carbon spectroscopy (13C-NMR). Furthermore, the melting temperature, crystallization temperature, thermal stability, and crystal growth mode of the polymer were tested and analyzed using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and wide-angle x-ray diffraction (WAXD), respectively. The results demonstrate that the crystal growth mode gradually changes from three-dimensional spherical growth to two-dimensional disk-like or three-dimensional spherical growth with the increase of 6T chain segment content. Simultaneously, the crystallization temperature, melting temperature, and crystallization rate of the polymer all showed a trend of decreasing first and then increasing, which was due to the combined effects of the increase in the content of 6T chain segments on the molecular-chain structure and crystal structure of the polymer. Bio-based PA5T-co-6T has excellent heat resistance and a wider processing window than PA5T and PA6T, which possesses great application prospects in the fields of automotive, electronic appliances, and LED optics.

CAS / MDL: 124-09-4 100-21-0
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
JOURNAL OF COLLOID AND INTERFACE SCIENCE · 2024 · IF 9.4

Thiocyanogen-modulated N, S Co-doped lignin hierarchical porous carbons for high-performance aqueous supercapacitors

Yukang Fan,Fangbao Fu,Dongjie Yang,Weifeng Liu,Xueqing Qiu

Constructing heteroatom-doped porous carbons with distinct charge storage properties is significant for high-energy–density supercapacitors, yet it remains a formidable challenge. Herein, we employed a thiocyanogen-modulated alkali activation strategy to synthesize N and S co-doped lignin hierarchical porous carbon (NSLHPC). In this process, thiocyanogen serves as a surface modulation mediator to substitute oxygen with nitrogen and sulfur species, while the combination of KOH activation and MgO template generates numerous nanopores within the carbon structure. The three-dimensional interconnected nanosheet architecture facilitates rapid ion transfer and enhances accessibility to active sites. Density functional theory (DFT) calculations demonstrate that introducing N and S heteroatoms through oxygen substitution reduces the adsorption energy barrier of Zn 2+ . Consequently, the optimized NSLHPC exhibits a remarkable specific capacitance of 438F/g at 0.5 A/g in 6 M KOH, delivering an energy density of 10.4 Wh/kg in the symmetric supercapacitor and an impressive energy density of 104.9 Wh/kg in the zinc-ion hybrid capacitor. The NSLHPC cathode also shows an excellent lifespan with capacitance retention of 99.0 % and Columbic efficiency of 100 % over 10,000 cycles. This study presents innovative strategies for engineering high-performance porous carbon electrode materials by emphasizing pore structure modulation and N, S co-doping as crucial approaches.

CAS / MDL: 9002-84-0
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
APPLIED CATALYSIS B-ENVIRONMENTAL · 2022 · IF 24.319

Deep insight of the influence of Cu valence states in co-catalyst on CO2 photoreduction

Zesheng Deng,Songchang Hu,Jiahui Ji,Shiqun Wu,Haijiao Xie,Mingyang Xing,Jinlong Zhang

Cu is widely used to prepare high-value products in photocatalytic CO 2 reduction reaction (CO2PR). The valence state of transition metals usually has a great impact on the catalytic process. However, the research on Cu valence in CO2PR is lack for its complex valence change. In current work, Cu x /P25 with stable Cu valence composition in CO2PR is prepared. The results show that Cu is composed of Cu 0 and Cu 2 O, and their proportions change regularly as Cu loading changing, which are linearly related to the selectivity of the corresponding products of CO2PR. Combined with thermodynamic and kinetic analysis, the CO adsorption and activation on the surface of Cu 0 and Cu 2 O are considered to be the key to determine the product of CO2PR, which is further confirmed by DFT calculation. Cu 0 and Cu 2 O are proved to be active site of producing CH 4 and CO, respectively. In this case, a reference for the study of highly selectivity Cu based photocatalysts is provided.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Advanced Energy Materials · 2019 ·Vol. 9 ·期 22 ·1900149 · IF 24.884

Densely Populated Isolated Single Co?N Site for Efficient Oxygen Electrocatalysis

Jiabin Wu,He Zhou,Qun Li,Ming Chen,Jun Wan,Nian Zhang,Liukang Xiong,Song Li,Bao Yu Xia,Guang Feng,Meilin Liu,Liang Huang

Atomically dispersed transition metals confined with nitrogen on a carbon support has demonstrated great electrocatalytic performance, but an extremely low concentration of metal atoms (usually below 1.5%) is necessary to avoid aggregation through sintering which limits mass activity. Here, a salt-template method to fabricate densely populated, monodispersed cobalt atoms on a nitrogen-doped graphene-like carbon support is reported, and achieving a dramatically higher site fraction of Co atoms (≈15.3%) in the catalyst and demonstrating excellent electrocatalytic activity for both the oxygen reduction reaction and oxygen evolution reaction. The atomic dispersion and high site fraction of Co provide a large electrochemically active surface area of ≈105.6 m 2 g −1 , leading to very high mass activity for ORR (≈12.164 A mg Co −1 at 0.8 V vs reversible hydrogen electrode), almost 10.5 times higher than that of the state-of-the-art benchmark Pt/C catalyst (1.156 A mg Pt −1 under similar conditions). It also demonstrates an outstanding mass activity for OER (0.278 A mg Co −1 ). The Zn-air battery based on this bifunctional catalyst exhibits high energy density of 945 Wh kg Zn −1 as well as remarkable stability. In addition, both density functional theory based simulations and experimental measurements suggest that the Co  N 4 sites on the carbon matrix are the most active sites for the bifunctional oxygen electrocatalytic activity.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
ADVANCED MATERIALS · 2021 ·Vol. 33 ·期 24 ·2100674 · IF 30.849

Surfactant-Free, One-Step Synthesis of Lead-Free Perovskite Hollow Nanospheres for Trace CO Detection

Wen Ye,Jing-Hui He,Qiang Cao,Wu-Ji Sun,Jia Wang,Ze-Kun Chen,Xue-Feng Cheng,Chuang Yu,Jian-Mei Lu

Owing to their special photoelectric properties, halide perovskites have always attracted research attention. Hollow-structured halide perovskites have many practical applications but are challenging to prepare as most template methods violate their poor chemical and thermal stability. In this study, novel halide perovskite Cs 2 PdBr 6 hollow nanospheres are prepared using a template-free method; specifically, large quantities of highly pure lead-free halide perovskite Cs 2 PdBr 6 hollow nanospheres are produced at 30 °C without a surfactant. These ultrapure nanospheres exhibit superiority in chemresistive detection of CO with a detection limit of 50 ppb, which is the lowest among all the reported CO sensing materials. Moreover, in situ sum-frequency-generation spectra and density functional theory calculations reveal that the high sensitivity is attributable to the large specific surface area and surfactant-free surface of rich Br − vacancies that favor CO binding. Overall, this work provides insight on regulation of the halide perovskite structure and the use of hollow spheres in gas-sensing applications.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。