Polymers
·
2021
·Vol. 13
·期 21
·3748
·
IF 4.329
Yuandong Wu,Weishuang Zheng,Yinan Xiao,Beining Du,Xingru Zhang,Min Wen,Chen Lai,Yi Huang,Liyuan Sheng
The limitations of hydrophilicity, strength, antibacterial activity adsorption performance of the biobased and biocompatible polymer materials, such as polyhydroxyalkanoates (PHAs), significantly restrict their wider applications especially in medical areas. In this paper, a novel composite membrane with high antibacterial activity and platelet adsorption performance was prepared based on graphene oxide (GO), MXene and 3-hydroxybutyrate-co-hydroxyvalerate (PHBV), which are medium-chain-length-copolymers of PHA. The GO/MXene nanosheets can uniformly inset on the surface of PHBV fibre and give the PHBV—GO/MXene composite membranes superior hydrophilicity due to the presence of hydroxyl groups and terminal oxygen on the surface of nanosheets, which further provides the functional site for the free radical polymerization of ester bonds between GO/MXene and PHBV. As a result, the tensile strength, platelet adsorption, and blood coagulation time of the PHBV—GO/MXene composite membranes were remarkably increased compared with those of the pure PHBV membranes. The antibacterial rate of the PHBV—GO/MXene composite membranes against gram-positive and gram-negative bacteria can reach 97% due to the antibacterial nature of MXene. The improved strength, hydrophilicity, antibacterial activity and platelet adsorption performance suggest that PHBV—GO/MXene composite membranes might be ideal candidates for multifunctional materials for haemostatic applications.
✓ 已验证
DOI
高影响因子
Surfaces and Interfaces
·
2022
·
IF 6.137
Yefeng Feng,Li Liu,Hongrong Qiu,Maolin Bo,Wanshan Duan,Qihuang Deng
Utilizing percolation of symmetric MXene filler easily achieves high dielectric constant in polymer/MXene composites. However, percolation leads to low breakdown strength . In present work, we have adopted a new strategy of employing asymmetric bimetallic VTiC MXene filler to fabricate composite dielectrics with highly insulating polyvinyl chloride (PVC) matrix. VTiC filler was prepared via heat-pressing and etching. PVC/VTiC composite films with varied filler contents were prepared via solution cast. Different surface work functions of VTiC were confirmed via density functional theory (DFT) calculations. Compared with several polymer/symmetric monometallic MXene composites in our prior works, PVC/VTiC composites show simultaneously improved dielectric and breakdown properties. In later, high dielectric constant stems from cooperation of filler's asymmetry and polymer/filler interface polarization, and high breakdown strength is rooted in matrix's ultrahigh insulation. Optimized PVC/VTiC composite with 10 wt% filler possesses a high dielectric constant of ∼203, low dielectric loss of ∼0.13 at 100 Hz and high breakdown strength of ∼374 MV m −1 at direct-current field. Innovation of this work is use of asymmetric MXene filler for constructing polymer-based composite dielectrics with promising properties. This work might pave a road for large-scale preparation of advanced dielectrics for capacitors.
✓ 已验证
DOI
高影响因子
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
·
2019
·
IF 3.375
Jin Liu,Ling Zhang,Chunzhong Li
While recent trends in flexible optoelectronic devices have led to a proliferation of studying transparent conductive electrodes (TCEs), maintaining the balance of high transmittance and high conductivity of TCEs remains a challenge. Herein, the collaboration of a silver nanowire (AgNW) network and new 2D Mxene nanosheets with excellent conductivity, hydrophilicity, and mechanical flexibility contributes to a highly transparent and conductive hybrid electrode through a simple, scalable, low-cost, solution-processing method. This AgNW-Mxene electrode shows a low sheet resistance of 15.9 Ω sq.–1 at an ultrahigh transmittance of 92.5% and remarkable mechanical durability and chemical stability. As a proof of concept, the AgNW-Mxene electrode is used in flexible alternating-current electroluminescent device, showing outstanding flexibility and stable illumination, which can maintain a constant illumination even under bending at 180°. This promising high-performance electrode will definitely provide a brand-new pathway for the development of flexible optoelectronic devices.
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2022
·
IF 16.744
Lun Zhang,Xiaoyu Zhang,Huiyuan zhang,Liqiang Xu,Dong Wang,Xingyuan Lu,Aimin Zhang
Flexible sensors are attracting tremendous interest in electronic skins and human detection. It is highly desirable yet challenging to incorporate self-healing, high sensitivity, and large stretchability into strain sensors due to their internal contradiction and complex manufacturing process. Herein, we fabricate such a sensor with a unique multiscale conductive layer structure by simply spraying conductive substances to the elastomer with dynamic Diels-Alder (DA) bonds. The multiscale structure consists of 1D semi-embedded silver nanowire (AgNW) and 2D transition metal carbide/carbonitride (MXene) nanosheets. Meanwhile, the AgNW does not merely provide stable conductivity as well as a robust interface bonding with the substrate under considerable strain. While MXene is tightly coated on the AgNW skeleton, the intrinsic brittleness of MXene supports a significant resistance variation when stretching. The obtained sensor can simultaneously achieve highly sensitive, a wide sensitivity range (0.5%∼ 96%), excellent durability, fast response (71 ± 4.9 ms), and relaxation (138 ± 5.8 ms). Interestingly, it can also detect pressure over a wide range (183–2260 kPa) and even withstand human walking and hand touching. Moreover, benefiting from the dynamic and designability crosslink network, the mechanical and electrical properties can be restored. This excellent sensor provides an approach for next-generation wearable electronics.
✓ 已验证
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2022
·
IF 7.392
Yijun Fu,Yue Cheng,Qufu Wei,Yahong Zhao,Wei Zhang,Yumin Yang,Dawei Li
Single function of biomass aerogel restricts its further development, multifunctional biomass aerogel is becoming an urgent need. In this work, multifunctional biomass composite aerogel was prepared by co-modifying MXene and Ag nanowires (AgNWs) on bacterial cellulose/chitosan (BC/CH) composite aerogel through a facile method combining physical mixture, lyophilization and electrostatic adsorption. The as-prepared BC/CH/MXene/AgNWs composite aerogel could be applied as health monitoring sensor and photo-thermal antibacterial material. As a sensor, it showed high sensitivity, short response time, and satisfactory cycling stability for health monitoring. Moreover, the composite aerogel was successfully employed to monitor various human body motions including foot movements, elbow movements, wrist movement, respiration, and throat vibration pronunciation. In addition, the composite aerogel displayed excellent photothermal conversion performance, which could be quickly heated to more than 60 °C in 60 s under NIR laser irradiation (808 nm, 0.6 W/cm 2 ). The BC/CH/MXene/AgNWs composite aerogel showed nearly 100% sterilizing effect due to the synergistic antibacterial effect from common antibacterial role of CH/AgNWs and photo-thermal antibacterial role of MXene. The novel aerogel possesses more response characteristics and better antibacterial property than existing biomass aerogels, which may develop potential application prospect in wearable and implantable bioelectronic material for health monitoring.
✓ 已验证
DOI
高影响因子
FUEL
·
2023
·
IF 7.4
Wei Zheng,Zequn Yang,Jiefeng Chen,Weizhen He,Ruiyang Qin,Hongxiao Zu,Wenqi Qu,Jianping Yang,Lijian Leng,Hailong Li
A fundamental obstacle that restricts the use of metal selenides for gaseous elemental mercury (Hg 0 ) immobilization is the failure to take both the optimization of intrinsic structure favorable for Hg 0 diffusion and adequate exposure of metal selenide towards Hg 0 into consideration. In this work, a Ti 3 C 2 MXene/Cu 2 Se sorbent for Hg 0 sequestration was synthesized via a Lewis acid etching route combined with room-temperature selenization pathway. During this strategy, copper chloride plays a dual role, i.e., an etching agent for the Ti 3 C 2 MXene synthesis and a precursor for Cu 0 decoration. Cu 2 Se precursors (Cu 0 ) were dispersedly and firmly pre-anchored on the substrate, effectively avoiding the agglomeration and warranting excellent dispersion of Cu 2 Se. Compared with pristine Cu 2 Se, Ti 3 C 2 MXene/Cu 2 Se exhibits advantageous structural characteristics fully boosting Hg 0 diffusion kinetics. Meanwhile, the enhanced dispersion of Cu 2 Se from the prefixation of Cu 0 largely enhances the exposure and utilization of selenide. Consequently, Ti 3 C 2 MXene/Cu 2 Se shows a Hg 0 adsorption capacity of 147.64 mg g −1 , which is much higher than those of Cu 2 Se and most other metal selenides. Impressively, its uptake rate of 688.99 μg g −1 min −1 is the highest record rate in metal selenides. Moreover, Ti 3 C 2 MXene/Cu 2 Se still maintained outstanding Hg 0 adsorption performance under relatively high reaction temperature with the shelter of Ti 3 C 2 MXene. Typical fuel gas situations including coal combustion flue gas, smelting flue gas, natural gas have negligible influences on its Hg 0 adsorption performance, indicating its extensive applicability and flexibility for actual industrial situations. This work also provides valuable hints for the trade-off of structural properties and ligands exposure to design Hg 0 sorbents with satisfactory Hg 0 sequestration performances.
✓ 已验证
DOI
高影响因子
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS
·
2025
·
IF 3.4
Liwei Yang,Xinshuai Yan,Jianguo Duan,Kun Lei,Yaxiong Wang,Jianguo Cheng
Phase change materials (PCM) possess the issues of leakage, low thermal conductivity, lack of rigidity and poor photo thermal conversion ability. To overcome these challenges, we have successfully designed and prepared flexible PW/PU/CuNWs/MXene (PPCuM) composite phase change materials with high thermal conductivity by solution blending and vacuum impregnation by using polyurethane (PU), one-dimensional copper nanowires (CuNWs) as high thermal conductivity, and two-dimensional transition metal carbide/nitride (MXene) as fillers. Furthermore, PU based PCM is developed by adding MXene at different weight fractions and the influence of MXene content on PPCuM properties was studied. As expected, benefiting from the high aspect ratio and strong capillary force of the MXene as well as the interfacial interaction between the PCM molecule and MXene, the resulting PPCuM exhibit a large thermal conductivity (0.705 W·m−1·K−1), which is 332.5% higher than that of pure PW, high latent heat (155.42 J·g−1), mechanical strength reaches 81.83 KPa, and are form-stable upon heating up to 75°C. The solar simulator and thermal conductivity demonstrated a superior photo-thermal conversion capability and thermal networks for the developed PU based composite sample at 83.3 wt% of MXene. At the same time, MXene effectively improved the photo-thermal conversion capacity (91.35%) and heat transfer rate (2.91 J·s−1) of PPCuM, which was further confirmed by the surface temperature distribution results. In addition, PPCuM has excellent photo-thermal conversion efficiency, good chemical compatibility, crystallization properties, and acceptable thermal stability.
✓ 已验证
DOI
高影响因子
CARBOHYDRATE POLYMERS
·
2024
·
IF 10.7
Qi Ao,Lin Jiang,Ying Song,Xinglai Tong,Tuohao Jiang,Xiaoxiao Lv,Jun Tang
Efficient, green and stable catalysis has always been the core concept of enzyme catalysis in industrial processes for manufacturing. Therefore, we construct a new strategy with photothermal interfacial molecular transfer for green and efficient biodiesel catalysis. We encapsulate Candida albicans lipase B (CalB) in a γ-cyclodextrin metal-organic framework (γ-CD-MOF) loading with Ti 3 C 2 T X by in situ growth and electrostatic assembly. The γ-CD-MOF not only protects the fragile enzyme, but also enhances the catalytic performance through the synergistic effects of porous adsorption (MOF pore structure) and interfacial enrichment (cyclodextrins host-guest assembly structure) for accelerating substrate transfer (642.6 %). The CalB@γ-CD-MOF/MXene-i activity can be regulated up to 274.6 % by exposure to near-infrared (NIR). Importantly, CalB@γ-CD-MOF/MXene-i achieves 93.3 % biodiesel conversion under NIR and maintained 86.9 % activity after 6 cycles. Meanwhile, the MXene after the CalB@γ-CD-MOF/MXene catalytic cycle can be almost completely recovered. We verify the mechanism of high catalytic activity of γ-CD-MOF and rationalize the mechanism of CD molecular channel by DFT. Therefore, this highly selective enzyme catalytic platform offers new possibilities for green and efficient preparation of bioenergy .
✓ 已验证
DOI
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2025
·
IF 8.5
Hongyu Xu,Jingjing Zhang,Xue Lu,Shijing Feng,Zigang Xu
In this study, a novel composite functional hydrogel was developed, integrating outstanding mechanical properties, remarkable catalytic activity, and highly sensitive sensing performance. Here, the dispersion behavior of Ti 3 C 2 T x (MXene) via ionic liquids was examined, focusing on the interplay between surface functional groups of MXene and IL. The study aims to elucidate the mechanisms governing dispersion stability. Subsequently, a novel Polyacrylamide(PAM)/Polyacrylic acid(PAA)/Chitosan/ionic liquid(IL)-MXene hydrogel was designed. PAM/PAA offers a 3D framework, multiple bonds such as hydrogen bonds and electrostatic interactions are formed with PAM/PAA and chitosan by IL-MXene, and the mechanical strength of the hydrogel is further enhanced. Meanwhile, the hydrogel is endowed with good electrical conductivity and sensing capabilities by MXene, which serves as a conductive filler. A strain of 2980 %, a tensile strength of 1050 kPa are displayed by the hydrogel. Simultaneously, it exhibits gauge factor (GF) of 13.6 and a rapid response time. Under eco-conscious waste management, the functional regeneration of waste hydrogels as adsorbents significantly enhances the sustainability of environmental remediation. pAAm/PAA/Chitosan/IL-MXene serves as a template for the synthesis of Au NPs, facilitating the reduction of 4-NP with a catalytic rate constant of 0.113 min -1 . This composite hydrogel exhibits remarkable mechanical properties and multiple functions. Under an eco-conscious waste management framework, the functional regeneration of waste hydrogels into high-performance adsorbents represents a significant advancement in sustainable environmental remediation. For instance, the discarded pAAm/PAA/Chitosan/IL-MXene hydrogel system serves as an effective template for the in situ synthesis of gold nanoparticles (Au NPs), demonstrating exceptional catalytic activity in the reduction of 4-nitrophenol (4-NP) with a rate constant of 0.113 min -1 . Beyond its catalytic efficiency, this composite hydrogel exhibits outstanding mechanical robustness and multifunctionality. In particular, the chitosan within the hydrogel matrix plays a significant role in enhancing antibacterial properties. Moreover, even after undergoing several catalytic cycles, it still maintains >90 % of its original state, indicating excellent cyclic stability and recyclability. Due to these outstanding characteristics, multifunctional hydrogel holds great promise for applications in the fields of flexible sensors and catalysis.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Applied Nano Materials
·
2025
·
IF 5.5
Yuelin Lu,Jie Bai,Binbin Sun,Nannan Li,Cong Wang,Zhenhuai Yang,Qiang Wang
Currently, high-performance energy storage devices have requirements for electrode materials such as high power density, good stability, and high storage efficiency in various applications. The restacking of two-dimensional MXene nanosheets significantly impacts the performances of energy storage devices. Although three-dimensional (3D) electrode structures exhibit enhanced energy storage capacities, they possess poor stabilities and low storage efficiencies. These issues are addressed in the current study using a directional freeze-drying method and a one-step hydrothermal process to fabricate a nanoscale porous interconnected MXene/PVA (poly(vinyl alcohol))/rGO (reduced graphene oxide) composite aerogel electrode for supercapacitor applications. The rGO provides a stable conductive skeleton, while the hydrophilic PVA acts as a binder to strengthen the interactions between MXene and rGO, and contributes to the capacitance after carbonization. The resulting 3D composite aerogel increased the interlayer spacing of the Ti3C2Tx MXene, enabling efficient electrolyte penetration and ion transport. Due to the synergistic effect of the MXene pseudocapacitance and the rGO double-layer capacitance, the prepared aerogel exhibited a maximum specific capacitance of 489.7 F g–1 at a scan rate of 2 mV s–1. Furthermore, it demonstrated an excellent energy density of 30.2 W h kg–1 at a power density of 2040 W kg–1. After 10,000 charge/discharge cycles at a current density of 10 A g–1, the capacitance retention rate increased slightly to ∼103.85%, representing an excellent cyclic performance. This study offers an effective solution for MXene-based composite aerogel electrodes, meeting the demands of high-performance energy storage and guiding future material optimization.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2025
·
IF 13.2
Song-Yi Liao,Jing Chen,Dao-Ren Deng,Cai-Yun Wu,Selina X. Yao,Yi Wang,Yu-Ming Ru,Xiao-Yan Li,Xu-Gang Shu,Yong-Gang Min
In this study, a hybrid composite of MXene loaded with carbon-coated Ni 0.96 S hollow nanobox (shortened as HC-Ni 0.96 S@MXene/C) is successfully synthesized. The micro-structure of HC-Ni 0.96 S@MXene/C is further analyzed by transmission electron microscopy (TEM) and scanning electron microscopy (SEM) with EDS mappings. The results reveal that ∼550 nm Ni 0.96 S nanobox with ∼60 nm shell is effectively loaded on MXene nanosheets and encapsulated by a thin carbon layer. When evaluated as advanced anode for lithium-ion batteries (LIBs), HC-Ni 0.96 S@MXene/C achieves a specific capacity of 810.9 mAh g - 1 at 0.1 A g - 1 and remains 455.6 mAh g - 1 at 0.5 A g -1 after 200 cycles. Moreover, in sodium-ion batteries (SIBs), HC-Ni 0.96 S@MXene/C anode delivers 416.5 mAh g - 1 at 0.05 A g - 1 and maintains 201.4 mAh g - 1 at 0.5 A g - 1 after 400 cycles. Additionally, the HC-Ni 0.96 S@MXene/C anode demonstrates higher pseudo-capacitance effects of 81.6 and 92.5 % at a scanning rate of 1 mV s - 1 in LIBs and SIBs respectively. Moreover, the higher pseudo-capacitance effects in SIBs are according with the facts that the ionic diffusion coefficients of Na ions ( D Na + = 4.6 ∼ 40.6 × 10 -11 (discharge) and 1.7 ∼ 127.8 × 10 -11 (charge) cm 2 /s) are larger than those of Li ions ( D Li + = 1.1 ∼ 19.6 × 10 -11 (discharge) and 0.82 ∼ 32.6 × 10 -11 (charge) cm 2 /s) for HC-Ni 0.96 S@MXene/C anode. The excellent electrochemical performances of HC-Ni 0.96 S@MXene/C should be assigned to hollow Ni 0.96 S structure, carbon coating and conductive MXene nanosheets, which collectively alleviate volume changes during cycling, enhance electronic conductivity and accelerate ion diffusion respectively. This strategy of synthesizing HC-Ni 0.96 S@MXene/C may provide a guidance for designing advanced LIBs/SIBs anodes in the near future.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2025
·
IF 6.3
Chunyan Zhang,Yu Liu,Yi Zhao,Yining Qu,Li Wang,Han Zhang,Daomei Chen,Jiaqiang Wang
Most photocatalysts reported to date require sacrificial agents to achieve high-efficiency photocatalytic production of H 2 O 2 . Developing photocatalysts for H 2 O 2 production without sacrificial agents remains a significant challenge. In this study, we proposed an interfacial Schottky junction consisting of InP quantum dots (QDs) and Ti 3 C 2 T x nanosheets for photocatalytic production of H 2 O 2 without relying on any sacrificial agents. The InP/Ti 3 C 2 T x photocatalyst demonstrated high efficiency in generating H 2 O 2 , even when tested in wastewater and tap water. The photocatalytic rate of 5InP/Ti 3 C 2 T x reached 21.31 mmol g⁻¹ h⁻¹, which is 112 times greater than InP QDs. The 5InP/Ti 3 C 2 T x catalyst achieved a degradation performance of 99.9% for acid orange 7. The photocatalytic production of H 2 O 2 was effectively utilized in actual wastewater to decrease chemical oxygen demand (COD) levels. The COD concentration was decreased to 67 mg L −1 , well below the permissible threshold set by China's Ministry of Ecology and Environment for coking chemical industry emissions. As far as we know, no prior study has documented the application of InP in the photocatalytic production of H 2 O 2 within actual wastewater. This research explores the applications and impacts of InP compounds in the field of photocatalysis. This work introduces a novel approach for sacrificial agent-free photocatalytic H 2 O 2 production, offering a significant advancement in the field.
✓ 已验证
产品关联
DOI
高影响因子