NEW JOURNAL OF CHEMISTRY
·
2024
·Vol. 48
·期 21
·9702-9708
·
IF 2.7
An-Xu Ma,Cai-Fang Liu,Yu-Lan Zhu,Zong-Hong Luo,Hong-Mei Zhou,Yue Zhang,Bang-Jin Wang,Jun-Hui Zhang,Sheng-Ming Xie,Li-Ming Yuan
In this work, a chiral core–shell microspheres composite, L-his-MIL-53-NH2@SiO2, was prepared through in situ growth and chiral post-modification strategies. The core–shell microspheres were applied as a novel chiral stationary phase for HPLC enantiomeric separation. Various racemates were separated on the L-his-MIL-53-NH2@SiO2 packed column using n-hexane/isopropanol as the mobile phase. The chiral column showed excellent separation efficiency for fourteen chiral compounds, including alcohols, alkanes, esters, phenols, ketones, and organic acids. The influence of injection mass and temperature on the separation performance of the chiral column were investigated. The relative standard deviations (n = 5) of the retention time and peak area by repeated separation of benzoin are 0.28% and 0.63%, respectively. The results show that the L-his-MIL-53-NH2@SiO2 packed column exhibited good reproducibility and stability. In addition, the chiral resolution ability of the L-his-MIL-53-NH2@SiO2 packed column was compared with that of a commercial chiral column (Chiralpak AD-H). The L-his-MIL-53-NH2@SiO2 packed column exhibits unique advantages in chiral separations that can be complementary to the commercial chiral column. It was demonstrated that the chiral core–shell microspheres composite L-his-MIL-53-NH2@SiO2 prepared based on in situ growth and chiral post-modification strategies has great potential for enantiomeric separation by HPLC.
✓ 已验证
产品关联
DOI
高影响因子
Materials Research Express
·
2023
·Vol. 10
·期 4
·045201
·
IF 2.3
Yun Chuan Liu,Li Ying Zhang,Xiang Lei Yu,Wei Chao Li,Jun Peng Li,Guo You Gan
A high-temperature conductive silver slurry containing lead-free ZnO-B2O3-SiO2 glass for metallization of ceramic MgTiO3 substrate has been prepared. The ZnO-B2O3-SiO2 glass was obtained by high-temperature melting and cold extraction with a transition temperature (Tg) of 579 °C and thermal stability (∆T) of 105 °C as an inorganic bonding phase of high-temperature conductive silver paste. Then, silver paste with different glass powder content was sintered on ceramic MgTiO3 substrate between 730 °C and 930 °C in increments of 50 °C. Characterization of the prepared materials revealed that their resistivity increases with the increase in glass powder content and decreases with the increase in sintering temperature. Sintering temperature and glass content have significant effects on the resistivity and adhesion of the thick silver film. When the silver paste with a glass content of 1.1 wt% was sintered at 830 °C for 10 min, the resulting thick silver film had a low resistivity of 1.81 μΩ·cm (1.65 μΩ·cm for silver) and a good adhesive strength of 39.4 N mm−2. During the sintering process, the glass material melts and wets the silver powder, which promotes the sintering of the silver powder to form a dense network structure and improves the electrical conductivity of the silver film. In addition, the formation of ZnTiO3 by chemical reactions between the glass and the substrate was observed, which dramatically improved the bonding strength of the silver film. Therefore, lead-free silver paste containing ZnO-B2O3-SiO2 glass powder and MgTiO3 ceramics has broad development prospects in ceramic filters.
✓ 已验证
DOI
高影响因子
COMPOSITES SCIENCE AND TECHNOLOGY
·
2019
·
IF 6.309
Mingye Wang,Lichun Ma,Longlong Shi,Peifeng Feng,Xuejie Wang,Yingying Zhu,Guangshun Wu,Guojun Song
A facile and rapid come close to the manufacture of advanced epoxy nanocomposites by grafting of nano-silicon dioxide (nano-SiO 2 ) onto the graphene oxide (GO) through thiol-ene click reaction was reported. The correlations between surface modification, morphology, dispersion/exfoliation, interfacial interaction of sheets and the corresponding mechanical properties of the composites were methodically explored. It appeared that nano-SiO 2 have been grafted onto GO via covalent bonding successfully, which effectively improved the interface compatibility and dispersion in epoxy matrix. The reinforcing mechanisms has been also elaborated. It is demonstrated that the tensile strength and elastic modulus for filler with 0.1 wt% GO-SiO 2 /epoxy composites increased by 32.18% and 22.86% compared to neat epoxy, respectively. It is believed that the simplistic and effectual method may provide a novel and promising strengthen design strategy for next‐generation advanced nanocomposite structures.
✓ 已验证
DOI
高影响因子
COMPOSITES PART B-ENGINEERING
·
2024
·
IF 12.7
Guoyi Pan,Jiaying Zhang,Yibin Lin,Jiaxin Li,Jieheng Zhang,Jinhai Mo,Wenjing Lin,Xiaofeng Lin,Yingjuan Sun,Guobin Yi
The research on composite materials with rainbow color (structural color) and ultraviolet excitation characteristics (fluorescence) is the development direction of the new generation of functional photonic engineering materials . Herein, composite materials composed of hollow SiO 2 photonic crystals (PCs) with nanometer thickness and PEGDA gel containing graphene quantum dots (GQDs) were prepared to achieve fluorescence regulation effect and thus apply in multi-level intelligent anti-counterfeiting. Due to the SiO 2 shell thickness of 20–41 nm, the Bragg diffraction law explained that the material underwent secondary refraction, resulting in a wide photonic band gap (PBG). On the other hand, due to the comparison of refractive index between air ( n = 1) and composite material ( n = 1.46), the transmittance of the composite materials were only 21 %–26 %, indicating strong refractive ability. Therefore, we constructed a PC structure with a wide photonic bandgap (PBG) to provide better wavelength selectivity and coverage range, which would significantly increase the effect of structural color on fluorescence. Based on the unique quantum dot size effect of GQDs, we also investigated the fluorescence enhancement effect with 157 nm FWHM located on PC materials. Therefore, artificial design and control of both fluorescence enhancement and fluorescence suppression had been achieved through multi-level regulation of structural color. We further utilized these properties to create multi-level anti-counterfeiting verification patterns, such as a 3 × 3 digital encoding matrix . The authenticity of the product information must be verified through stepwise identification under specified conditions. This intelligent anti-counterfeiting technology offers a novel approach to safeguard information security.
✓ 已验证
DOI
高影响因子
JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY
·
2018
·Vol. 18
·期 4
·2971-2978
·
IF 1.354
Yang Yuxiang,Zhao Min,Yao Pingping,Huang Yan,Dai Zuocheng,Yuan Hongming,Ni Chaoying
In the present work, three differently shaped mesoporous silica nanoparticles, spherical nano-SiO2, tubular mesoporous SiO2 and vesicle-like mesoporous SiO2 (VSL), were prepared and used to immobilize Horse radish peroxidase (HRP), and their enzyme’s
activity was also evaluated. It was found that the VSL immobilized HRP displayed higher specific activity than free enzyme and other two differently shaped silica immobilized HRP. After immobilization, the thermal stability, pH tolerance resistance and storage stability on vesicle-like SiO2
were studied as well. In addition, the kinetic constants K
m and V
max for HRP were significantly altered by immobilization. The affinity for HRP towards its substrate increased (with decreasing K
m), leading to enhanced catalytic efficiency
(with increased V
max). Moreover, the reusability for degradation of methoxychlor (MXC) by VSL immobilized enzyme was studied and its degradation products were detected by GC-MS and NMR analysis.
✓ 已验证
DOI
高影响因子
ACS Applied Nano Materials
·
2021
·
IF 5.097
Yuan Wang,Lei Feng,Haiyan Zhu,Hongyan Miao,Ying Li,Xuefeng Liu,Gang Shi
The fluorescence intensity of the ring-opened merocyanine (MC) form of spiropyran can be enhanced by metal nanostructures. However, direct contact between spiropyran and the metal results in fluorescence quenching, which will reduce the enhancement amplitude of MC fluorescence. Here, Ag nanoparticles (NPs), a TiO2 dielectric layer, a poly(methyl methacrylate)-spiropyran (PMMA-SP) layer, and Au shell-isolated NPs with SiO2 shells (Au@SiO2) are successively assembled on a Si wafer with micropyramids and nanoholes (Siph). The hierarchical structure of this substrate is similar to insects’ compound eyes with nano- and microstructures, which can reduce the reflection of incident light. Meanwhile, the Au/Ag-coupled plasmonic nanocavities can enhance the intensity of a local electromagnetic (EM) field. In addition, TiO2 and SiO2 layers can avoid the nonradiative energy transfer caused by the direct contact between spiropyan and the metal. Based on the above advantages, the fluorescence enhancement factor (EF) of this substrate is as high as 195, which is the maximum reported so far. Zn2+, Cu2+, and Sn2+ can also be detected on Siph/TiO2/PMMA-SP/Au@SiO2, whose detection limits are 0.054, 0.038, and 0.049 μM, respectively. Furthermore, this substrate can be reused to detect metal ions by taking advantage of the reversible isomerization of spiropyran. The bioinspired substrate has positive significance in improving the fluorescence intensity of MC, and its lack of specific recognition ability for metal ions is expected to be further improved by molecular modification of spiropyran.
✓ 已验证
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2020
·
IF 8.758
Zhong Xu,Tao Yang,Xiang Chu,Hai Su,Zixing Wang,Ningjun Chen,Bingni Gu,Hepeng Zhang,Weili Deng,Haitao Zhang,Weiqing Yang
Solid-state composite polymer electrolytes (CPEs) usually suffer from intrinsic low ionic conductivity and a solid–solid interface, badly inhibiting their widespread commercial application in all-solid-state Li-metal battery (ASSLMB) energy storage. Herein, a synergetic strategy using strong Lewis acid–base and weak hydrogen bonds was employed for self-assembly in situ construction of three-dimensional (3D) network-structured poly(ethylene oxide) (PEO) and SiO2 CPEs (PEO@SiO2). Ascribed to this synergistically rigid–flexible coupling dynamic strategy, a harmonious incorporation of monodispersed SiO2 nanoparticles into PEO could remarkably reduce crystallinity of PEO, significantly enhancing the ionic conductivity (∼1.1 × 10–4 S cm–1 at 30 °C) and dramatically facilitating solid electrolyte interface stabilization (electrochemical stability window > 4.8 V at 90 °C). Moreover, the PEO@SiO2-based ASSLMBs possess excellent rate capability over a wide temperature range (∼105 mA h g–1 under 2 C at 90 °C), high temperature cycling capacity (retaining 90 mA h g–1 after 100 cycles at 90 °C), and high specific capacity (146 mA h g–1 under 0.3 C at 90 °C). Unambiguously, these high ionic conductivity CPEs along with excellent flexibility and safety can be one of the most promising candidates for high-performance ASSLMBs, evidently revealing that this synergistically rigid–flexible coupling dynamic strategy will open up a way to exploit the novel high ionic conductivity solid-state electrolytes.
✓ 已验证
DOI
PubMed
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2018
·
IF 3.779
Zhongren Zhou,Peng Dong,Deyu Wang,Meng Liu,Jianguo Duan,G.P. Nayaka,Ding Wang,Cunying Xu,Yixin Hua,Yingjie Zhang
In this paper, a facile metallurgical method named molten salt electrolysis was introduced to synthesize silicon-titanium nanocomposite that was used as the anode for lithium-ion batteries (LIBs). Simply utilizing SiO 2 and TiO 2 mixture as the raw materials, upon the direct electrolysis in the molten salt chamber, the oxide precursor was reduced constantly to the complete production of silicon-titanium nanocomposite. Benefiting from the compositional and structural advantages of sample, the as-obtained silicon-titanium anode delivered enhanced reversible specific capacity and good cycling stability such as the initial discharge capacity of 1410.5 mAh g −1 with the columbic efficiency of 80.72% and reversible 638.1 mAh g −1 with a high retention of 92.2% just after the anode cycling for 50 times. The average specific capacity fading percentage was only 0.16% per cycle between the 4 th to 50 th cycles, the result of which showed a good electrochemical performance for lithium ion storage.
✓ 已验证
DOI
高影响因子
JOURNAL OF NON-CRYSTALLINE SOLIDS
·
2025
·
IF 3.5
Han Zeng,Maoqiang Bi,Zhonghe Tong,Yingtai Du,Xi Chen,Tianyan Jiang
In this study, the enhancement mechanism of SiO 2 modified by different silane coupling agents (SCA) on the moisture resistance, thermal properties and electrical insulation properties of epoxy resin (EP) composites is discussed. Through the combination of experimental tests and molecular dynamics (MD) simulations, the performance differences of five systems (EP, SiO 2 -EP, KH550 / SiO 2 -EP, KH560 / SiO 2 -EP, KH570 / SiO 2 -EP) in water absorption, glass transition temperature ( T g ) and volume resistivity are analyzed. The changes of free volume fraction (FFV), interaction energy, number of hydrogen bonds and diffusion behavior of water molecules are revealed from the microscopic point of view. The experimental results show that the introduction of modified SiO 2 significantly improves the moisture resistance, thermal properties and electrical properties of EP. Among them, KH550 modified SiO 2 has the best effect, T g increases by 12.3 %, volume resistivity increases by 22.1 %, and water absorption rate decreases by 21.9 % at 60 °C. MD simulations further confirm that the nano-SiO 2 modified by SCA can effectively limit the diffusion of water molecules and reduce the effect of temperature on the mean square displacement (MSD) of the system. The KH550 / SiO 2 -EP system has the smallest free volume and the highest number of hydrogen bonds, which effectively inhibits the diffusion of water molecules and the movement of molecular chains. This study provides a theoretical basis and material design strategy for the application of epoxy composites in hygrothermal environments.
✓ 已验证
产品关联
DOI
高影响因子
E-POLYMERS
·
2022
·Vol. 22
·期 1
·488-504
·
IF 3.074
Fangsheng Wu,Zihua Zhang,Wei Liu,Yuan Liu,Xiujuan Chen,Pingyong Liao,Qiaoying Han,Lun Song,Hong Chen,Wenbin Liu
In this study, a novel material of core–shell structured magnetic molecularly imprinted polymers (Fe 3 O 4 @SiO 2 @Au (FSA)-MIPs) was successfully prepared for the rapid and selective determination of 4-methylmethcathinone (mephedrone, 4-MMC). The adsorption capacity of FSA-MIPs is 34.7 mg·g −1 at 308 K, which is significantly higher than magnetic non-imprinted polymers profiting from the imprinting effect. The FSA-MIPs have a short equilibrium (20 min) and could be reused more than six times. Moreover, the selectivity coefficients of FSA-MIPs for 4-MMC, 3,4-dimethylmethcathinone, butylone, 4-ethylmethcathinone, acetylfentanyl, and methylene blue are 4.01, 5.65, 7.62, 12.30, and 20.87 respectively, further indicating the markedly enhanced binding selectivity of FSA-MIPs. As an adsorbent, the FSA-MIPs were successfully applied for effective extraction of 4-MMC in three human urine samples with the recovery rates ranging from 85.5–92.6%. The results confirmed that the FSA-MIPs have good prospects in the extraction and separation of synthetic cathinones, which is suitable for further application in the criminal sciences field.
✓ 已验证
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2026
·
IF 6
Zhuoqing An,Xiaolong Ni,Zhuang Ma,Yuan Gao,Jiajing Chen
To investigate the effects of La 2 O 3 and Fe 2 O 3 on the structure and high viscosity of the CaO-MgO-Al 2 O 3 -SiO 2 (CMAS) glass system, the microstructure was analyzed using in-situ high-temperature Raman spectroscopy, and the viscosity was measured by high temperature hot-stage. A series of cluster models representing aluminosilicate systems modified by La and Fe ions were constructed, followed by geometric optimization and Raman spectral simulation via quantum chemistry ab initio calculations. The results indicates that the effects of La 2 O 3 and Fe 2 O 3 on both vibrational wavenumber and Raman scattering cross-section (RSCS) followed the order: La < (La + Fe) < Fe. The addition of La 2 O 3 and Fe 2 O 3 loose the glass network structure, and led to a progressive rise in the relative content of Q 0 , Q 1 , and Q 2 units, accompanied by a notable decrease in Q 3 and Q 4 units. Consequently, the high viscosity and viscous flow activation energy decrease with the addition of La 2 O 3 and Fe 2 O 3 , but Fe 2 O 3 has a more pronounced effect. Furthermore, based on the NBO/T for characterizing the microstructure, the relationship between viscosity and microstructure is quantitatively analyzed.
✓ 已验证
产品关联
DOI
高影响因子
BIOINORGANIC CHEMISTRY AND APPLICATIONS
·
2022
·
IF 4.724
Yuqin Yang,Junjie Miao,Zhendong Yin,Weili Hao,Hongmei Shi,Ling Ma,Tiesheng Shi
Efficient extractions of trace antibiotic residues in the environment are a key factor for accurate quantification of the residues. A new nanoporous material, namely, magnetically covalent organic polymer (MCOP, Fe3O4@SiO2-NH2-COP) was synthesized in this work and was used for magnetic solid-phase extraction (MSPE). The combination of MSPE with high-performance liquid chromatography separation together with ultraviolet detection (HPLC-UV) was established as an effective method for the determination of four sulfonamide (SA) residues in surface water surrounding a cattle farm. The synthesized magnetic material was characterized by SEM, TEM, FT-IR, magnetic properties measurement system (MPMS), and nitrogen gas porosimetry. The material possessed many attractive features, such as a unique microporous structure, a larger specific surface area (137.93 m2·g−1) than bare Fe3O4 (24.84 m2·g−1), high saturation magnetization (50.5 emu·g−1), open adsorption sites, and high stability. The influencing parameters, including pH, the used amount of MCOPs, the type of eluent, adsorption solution, and desorption time, were optimized. Under the optimized conditions, the method conferred good linearity ranges (R2 ≥ 0.9990), low detection limits (S/N = 3, LOD, 0.10–0.25 μg·L−1), and satisfactory recoveries (79.7% to 92.2%). The enrichment factor (EF) for the four SAs was 34.13–38.86. The relative standard deviations of intraday (n = 5) and of interday (n = 3) were less than 4.8% and 8.9%, respectively. The equilibria between extraction and desorption for SAs could be reached within 150 s. The proposed method was sensitive and convenient for detecting SA residues in complex environmental matrices, and the successful application of the new MCOPs as an adsorbent was demonstrated.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
危险品化学品经营许可证（带存储）