文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第2881至2892个,产品总数4,488个

切换升序
Cu)
Catalysts · 2026 ·Vol. 16 ·期 7 ·628 · IF 4.5

Phosphate Modification Promotes Low-Temperature NH3-SCO over Cu/CeO2 Through Coupled Regulation of Surface Acidity and Oxygen Species

Shiqi Ma,Haoyang Li,Yuchen Huang,Kai Sun,Yuejia Huang,Yarong Fang,Yan Du

Selective catalytic oxidation of ammonia (NH3-SCO) is a promising technology for ammonia abatement. Cu/CeO2catalysts have attracted extensive attention because of their strong metal–support interaction and favorable redox properties. However, their practical application is still limited by insufficient low-temperature catalytic activity and unsatisfactory control of by-product formation. Herein, phosphate-functionalized Cu/CeO2catalysts were fabricated to regulate surface acidity and oxygen species behavior, thereby promoting low-temperature NH3-SCO activity. The optimal Acid-Cu/CeO2catalyst achieved 90% NH3conversion at 260 °C, corresponding to a 192 °C decrease in T90compared with pristine Cu/CeO2(452 °C). Kinetic analysis showed that the apparent activation energy decreased from 125.78 to 84.70 kJ mol−1after phosphoric acid modification. In addition, Acid-Cu/CeO2maintained relatively high N2selectivity and lower NOxselectivity over the tested temperature range, indicating that phosphate modification suppresses the deep oxidation of NH3to NOxby-products. Structural and surface characterization results demonstrated that Cu species remained highly dispersed on CeO2after modification, while surface phosphate species modified the local electronic environment and redistributed oxygen species. O 1s XPS and O2-TPD results revealed that phosphate modification decreased the static surface adsorbed/defect-related oxygen fraction but improved the accessibility and mobility of labile surface/subsurface or weakly bound lattice oxygen species. Py-IR and DRIFTS results further showed that phosphate modification increased Brønsted/Lewis acidity, enhanced NH3adsorption and N-H activation, and facilitated the formation and subsequent consumption of NHx/-NHO-related intermediates under reaction conditions. This work provides insights into phosphate-mediated regulation of surface acidity and oxygen mobility and offers a strategy for designing efficient low-temperature Cu/CeO2-based NH3-SCO catalysts.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Journal of Environmental Chemical Engineering · 2026 ·Vol. 14 ·期 6 ·124949 · IF 7.5

Intercalative construction of Cu/W/Ni3Al-MMO hierarchical catalysts for the efficient catalytic conversion of cellulose to ethylene glycol

Jiamin Wang,Tengjuan Ma,Yulong Ma,Jinpeng Wei,Haiyan Yan,Yonggang Sun

In recent years, developing highly active non-noble metal catalysts for biomass hydrodeoxygenation (HDO) to achieve value-added conversion has attracted significant attention. However, major challenges remain in catalyst efficiency, stability, and the precise control of reaction pathways.In this study, a synergistic Ni-W-Cu mixed metal oxide (MMO) catalyst was prepared from LDH precursors via a stepwise "ion exchange-active site introduction" strategy. Under optimized conditions (240 ℃, 2.5 MPa H 2 , 2.5 h), the catalyst achieved complete cellulose conversion with 72% ethylene glycol selectivity. Even after five reuse cycles, it retained 95.4% conversion and 62% selectivity. Characterization demonstrated that appropriate Cu loading promoted Ni-Cu alloying and modulated Ni electronic structure, which induced abundant W 6 + /W 4+ species and oxygen vacancies (O V ). In this architecture, W 6+ provides Lewis acidity, while W 4+ couples tightly with O V , thereby synergistically enhancing the catalyst's hydrogenation capability and bond-cleavage ability. Density functional theory (DFT) calculations reveal that the strong interaction between W and Cu constructs highly efficient adsorption sites, enabling the precise catalysis of C-O bond scission. These findings suggest that tailoring the W-Cu interplay offers a viable strategy for directing product selectivity. By engineering a stable, multifunctional catalyst for biomass conversion, this study provides a new strategy for constructing high-performance HDO catalysts.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
ACS Omega · 2026 · IF 5.2

MXene@Cu-BTC/PPy Carbon with MWCNTs@MoS2 Hierarchical Composite for Electrochemical Detection of Anthracene and Phenanthrene in Licorice

Yili Li,Jinxin Fang,Xinyi Du,Liqiang Deng,Xiaoya Mo,Haijun Huang,Weiguo Cao

Herbal medicines are particularly vulnerable to contamination by polycyclic aromatic hydrocarbons (PAHs) due to their relatively long growth cycles and multistep processing. This contamination may compromise the efficacy and safety of the prepared herbal slices. The current work innovatively synthesized a hierarchical composite of MXene@Cu-BTC/PPy carbon with MWCNTs@MoS2 (MCuP350/MWCNTs@MoS2) through a sequential in situ growth approach. The material was characterized by using Field Emission Scanning Electron Microscopy (FE-SEM), High-Resolution Transmission Electron Microscopy (HR-TEM), X-ray Photoelectron Spectroscopy (XPS), X-ray Diffraction (XRD), and Fourier Transform Infrared Spectroscopy (FT-IR) techniques. The electrochemical sensor was prepared based on the MCuP350/MWCNTs@MoS2 composite, which exhibited excellent electrocatalytic activity, displaying good linear responses to both anthracene (ANT) and phenanthrene (PHE). The detection limits of the presented sensor were 0.604 μM (ANT) and 0.240 μM (PHE), respectively. In commonly used herbal medicine of licorice, the effectiveness of the developed sensor for detecting ANT and PHE was validated by the standard addition method, with satisfactory recoveries of 100.36%–104.75% and 97.43%–104.44%, respectively. Additionally, the sensor exhibits high selectivity against the potential interfering substances existing in licorice. These results confirm the feasibility of directly detecting PAHs in licorice via the developed sensor without the need for complex sample pretreatment.

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
Journal of Environmental Chemical Engineering · 2026 ·Vol. 14 ·期 3 ·123082 · IF 7.5

pH-dependent self-enhanced decomplexation mechanism of Cu(II)-EDTA in UV/peroxydisulfate system: Reinterpreting the traditional autocatalysis hypothesis

Zhe Xu,Jiantong Zhou,Chengfeng Liu,Weilan Zhen,Taicheng An

The peroxodisulfate (PDS)-based oxidation systems are promising for Cu(II) complex decomplexation owing to its capacity to harness the self-enhanced decomplexation (SED) effect of Cu(II) complexes. This phenomenon was conventionally attributed to liquid-phase autocatalysis via Fenton-like reactions between daughter Cu(II) species and PDS. However, this frequently adopted hypothesis is inconsistent with the actual catalytic activity of Cu(II) species and has been challenged by our preliminary results. Herein, we revisit the decomplexation of copper(II)-ethylenediaminetetraacetate (Cu(II)-EDTA) in UV/PDS system, with particular emphasis on correcting the catalytic behaviors of Cu species and clarifying the indispensable role of UV-irradiation in SED effect. Both acidic and alkaline conditions exhibit significant SED effect, but we reveal a pH-dependent SED mechanism that is fundamentally different from the prevailing liquid-phase autocatalysis mechanism. Under acidic conditions, Cu(II) complexes exhibit enhanced catalytic capacity with decreasing ligand coordination strength, primarily stemming from the activation of PDS by Cu(I) species produced via the irradiation-induced intramolecular charge transfer; In alkaline environments, only liberated Cu(II) substantially contribute to SED effect via spontaneous hydrolysis, forming nanostructured CuO after aging, which activates PDS through heterogeneous Fenton-like processes. While acidic conditions demonstrate faster decomplexation, alkaline-generated solid products facilitate multi-cycle treatment efficiency and alkaline conditions also exhibits stronger resistance to chloride. This work corrects the misinterpretation of SED mechanism in UV/PDS/Cu(II)-EDTA system, and provides a fundamental and accurate mechanistic basis for the efficient treatment of copper-containing organic wastewater by PDS-based processes.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2026 · IF 12.5

Scalable fabrication of ultrathin LiIn@Cu composite anodes via roll-to-roll dip coating for high-energy-density batteries

Qihang Zhang,Anli Wang,Yifei Chen,Zihan Lin,Changyi Dong,Qiang Lu,Jixian Lv,Weike Yu,Siming Yang,Xiaoqun Qi,Jia Li,Fei Shen,Xiaogang Han

Scalable roll-to-roll dip coating fabricates ultrathin LiIn@Cu anodes. • Indium additive enhances molten lithium wettability on copper current collectors. • In₃Li₁₃ alloy phases act as lithiophilic sites to guide uniform Li deposition. • Pouch cell shows impressive flexibility under folding and unfolding conditions. Lithium metal anode is essential for next-generation high-energy-density batteries, yet its practical implementation is severely hindered by the challenges in manufacturing ultra-thin foils (< 50 μm) and the safety concerns associated with dendrite growth. In this study, we introduce a scalable and efficient roll-to-roll dip coating method to fabricate an ultra-thin (20 μm) LiIn@Cu composite anode. Copper current collector is lithiumphobic and hard to cast molten lithium. By adding a small amount of indium, it significantly improves the wettability of molten lithium on copper. The resulting anode demonstrates enhanced adhesion, along with abundant lithiophilic In₃Li₁₃ alloy phases that direct uniform lithium deposition. Electrochemical tests demonstrate that the LiIn@Cu anode delivers superior cycling stability for over 350 h in symmetric cells. Notably, when paired with NCM811 cathode at a low negative-to-positive (N/P) ratio of ~3, the full cell retains 85% capacity after 90 cycles, offering a promising strategy for the industrial-scale production of robust lithium metal anodes.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
MATERIALS LETTERS · 2026 · IF 2.6

Crystal field engineering via Sr modulation for tunable broadband emission and enhanced afterglow in Ca1-xSrxZnOS: Cu, Y phosphors

Hanlu Zhang,Tianqi Li,Yagang Feng,Shichang Cai,Xuexia Chen

CaZnOS is regarded as an excellent phosphor host with relatively favorable doping sites. However, CaZnOS-based long-persistent luminescence (LPL) materials still encounter challenges such as a narrow emission color range and short persistent luminescence lifetime. In this work, we modulated the emission band and LPL properties of a series of Ca 1-x Sr x ZnOS:0.1%Cu,1%Y phosphors through crystal field engineering by controlling the Sr/Ca ratio. The emission peak of the phosphor series was successfully tuned over 524–681 nm (from blue-green to orange-yellow), accompanied by a remarkable enhancement in both emission intensity and afterglow duration as x increases from 0 to 0.9. Moreover, the anomalous luminescence behavior of the SrZnOS:0.1%Cu,1%Y sample implies the crucial role of the Sr/Ca substitution-induced lattice distortion for tailoring the luminescence properties. Thermoluminescence (TL) spectra reveal that the persistent luminescence properties of these phosphors are closely correlated with their trap depth controlled by the Sr substitution ratio. This work provides an important reference for the composition design and development of high-performance LPL phosphors.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA · 2026 ·Vol. 36 ·期 3 ·988-999 · IF 5.5

Simulation prediction and experimental study of phase equilibrium for Ag−Cu and Ag−Sb binary alloys in vacuum distillation

Qing-song LI,Bin YANG,Yang TIAN,Bao-qiang XU,Wen-long JIANG,Yuan GAO,Zong-kui JIANG

The modified molecular interaction volume model (M-MIVM) was used to calculate the activity values and their deviations from experimental data for Ag−Cu and Ag−Sb binary alloys. Subsequently, theoretical vapor−liquid equilibrium phase diagrams ( T − x − y and p − x − y ) were plotted via combining M-MIVM and vacuum theory. The vapor−liquid phase equilibrium (VLE) experiments were conducted on the Ag−Cu alloy at 1500−1560 K and 10−15 Pa and Ag−Sb alloys at 950−1350 K and 10 Pa. The results showed that the average relative deviation and average standard deviation of activity were lower than 5% and 0.02, respectively. A comparison of theoretical and experiment results for VLE revealed that the simulated data on the T − x − y diagram were well consistent with experimental values. Therefore, the VLE phase diagrams can serve as a guide in vacuum separation experiments and industrial production for Ag−Cu and Ag−Sb binary alloys.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Nature Communications · 2026 · IF 18.1

Activating bulk S/Se/Te positive electrodes by acidic binder-induced Cu corrosion for wide-temperature Na-Chalcogen batteries

Lu Chengxing,Li Boyu,Li Qun,Liu Shuaishuai,Cheng Jinnuo,Yan Jiahao,Wang Zemin,Liu Tong,Wang Jinkai,Zhao Qing

Sluggish kinetics and shuttle effects hinder high-energy rechargeable sodium-chalcogen batteries, requiring nanostructured positive electrodes with excess conductive additives. Here, we show that an acidic binder-induced corrosion strategy enables activity in bulk S/Se/Te positive electrodes. Carboxylic acid-rich binders create an acidic microenvironment (pH≈3) during processing, triggering spontaneous formation of copper chalcogenide interlayers on Cu current collectors. These interlayers reconstruct into active Cu 2 X (X = S/Se/Te) catalysts during cycling. Using Na-Se batteries, experimental and DFT analyses confirm Cu 2 Se reduces the liquid-solid conversion barrier by ~24.1% and accelerates polyselenides conversion. Polar groups in the binders enhance chemisorption, reducing the shuttling effect. Consequently, bulk Se with alginic acid binder achieves 96% theoretical utilization at 0.1 A g ‒1 , rate capability of 508 mAh g ‒1 at 20 A g ‒1 , stable cyclability at 5 A g ‒1 over 16,000 cycles, and low-temperature operation at 0.1 A g ‒1 (94% capacity retention at −20 °C). The strategy of transforming binders into active interface modulators provides a generalizable approach for other chalcogens, enabling practical and host-free rechargeable metal batteries with chalcogen positive electrodes.

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
Catalysts · 2026 ·Vol. 16 ·期 5 ·479 · IF 4.5

Fe-Cu Co-Doping Enhanced Peroxymonosulfate Activation for the Degradation of Dimethyl Carbonate in Lithium-Ion Battery Recycling Wastewater

Shaomeng Huang,Feijian Jing,Liping Wang,Yiqing Xu,Jiawen Sheng,Qiongqiong He

The lithium battery recycling industry is developing rapidly, and the rapid oxidation and degradation of dimethyl carbonate (DMC) in the wastewater generated by this industry is of crucial importance. In this study, Fe and Cu dopants were controlled and the C-SiO2framework with porous structures was constructed to synthesize FeCuC-SiO2and C-SiO2catalysts. The former could achieve 91.65% of DMC degradation within 60 min through peroxymonosulfate (PMS) activation, and the degradation rate was increased to 4.44 times compared to C-SiO2without Fe and Cu doping. And under optimized conditions, a DMC degradation rate of 90.57% can be achieved within 10 min by FeCuC-SiO2. The catalyst has good stability and the catalytic activity can be maintained during reuse process for five times with over 70% of DMC degradation rate, 58.9% of mineralization rate, and a relatively low amount of metal leaching. Moreover, the degradation rate can still remain above 70% with the existence of impurity anions, demonstrating a strong salt resistance. Hydroxyl radicals (OH•), sulfate radicals (SO4•−), and1O2were found to dominant the reaction in the FeCuC-SiO2-PMS system, which were involved in both free radical and non-free radical pathways and led to excellent catalytic oxidation performance and environmental adaptability. In general, a novel design for a Fenton-like catalyst was presented, providing a theoretical basis for the improvement of oxidation efficiency and the regulation of reaction pathways in Fenton-like reactions.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
SENSORS AND ACTUATORS B-CHEMICAL · 2026 · IF 8.3

Electrochemical cell respiration strategy by Cu(II)-chitosan functionalized carbon paper for rapid and sensitive detection of staphylococcus aureus

Feng Hu,Mengyi Liu,Jubo Zhang,Fangjiu He,Xiaowen Shi

This study presents an innovative electrochemical biosensor for the rapid and sensitive detection of Staphylococcus aureus ( S. aureus ), a significant foodborne pathogen. The biosensor is based on carbon paper modified with a Cu(Ⅱ)-crosslinked chitosan hydrogel film. Unlike conventional methods that rely on biomolecular recognition, this paper sensor detects S. aureus by measuring its unique respiration cycle, specifically its ability to reduce ferricyanide to ferrocyanide in the presence of mannitol. The chitosan hydrogel enhances the surface concentration of ferrocyanide and exhibits anti-fouling properties, while Cu(Ⅱ) crosslinking improves conductivity and diffusion. The biosensor demonstrates high sensitivity (0.082 μA/μM in I-t tests and 5.31 μA/μM in DPV tests) and low limits of detection (3.47   μM in I-t tests and 0.64   μM in DPV tests). It achieves a detection linear range of 10 0 to 10 5 CFU/mL with an LOD of 3.4 CFU/mL as well as excellent repeatability (RSD of 4.2%) and stability (retaining 83.4% of its initial signal after 15 days). Its performance in real food and wound samples confirms its high sensitivity and reasonable recovery rates, even in complex matrices. This research provides a strong foundation for the application of electrochemical biosensors in food safety monitoring and pathogen detection.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
MICROCHEMICAL JOURNAL · 2026 · IF 5.2

Turning waste coffee grounds into a high-performance magnetic adsorbent for Cu(II) removal via ball milling and pyrolysis

Shuangyan Zhang,Chun Hu,Qihui Wei,Xiangbing Ding,Meixiu Pan,Yuchen Zhang,Huiling Zhang,Yunjun Mei

Coffee grounds are converted to magnetic biochar via one-step co-ball milling. • Cu(II) uptake increases by ∼66% with rapid magnetic separation. • Oxygen-containing groups and Fe 3 O 4 synergistically drive adsorption. • Over 71% capacity is retained after five cycles. The increasing prominence of Cu(II) pollution in water bodies has driven the development of efficient and easily recoverable adsorbents. In this study, M-CBC was prepared from waste coffee grounds via pyrolysis and ball milling. Ball milling significantly increased the specific surface area and introduced abundant oxygen-containing functional groups. The loaded Fe 3 O 4 provided favorable superparamagnetism (saturation magnetization: 8.87 emu/g), enabling rapid magnetic separation. Batch adsorption experiments showed that under optimal conditions (pH 5.0, dosage 0.8 g/L, time 180 min), the actual adsorption capacity for Cu(II) reached 23.54 ± 0.23 mg/g, representing an approximately 66% enhancement compared to unmodified biochar. The adsorption process followed the pseudo-second-order kinetic model and the Langmuir isotherm model, with a theoretical maximum adsorption capacity of 49.06 ± 1.36 mg/g at 25 °C, suggesting predominantly monolayer adsorption behavior on relatively homogeneous active sites. Thermodynamic analysis revealed that the adsorption process exhibited spontaneous and temperature-dependent characteristics, indicating the possible coexistence of multiple adsorption interactions. After five consecutive adsorption–desorption cycles, M-CBC retained 71.4% of its initial capacity, demonstrating excellent regeneration stability. Mechanistic analysis revealed that surface complexation with oxygen-containing groups played a dominant role, while the redox activity of Fe 3 O 4 provided synergistic enhancement. The combined effects of ball milling and Fe 3 O 4 loading effectively improved the adsorption performance, magnetic recoverability, and structural stability of the biochar. This work offers a resource-efficient approach to valorize waste coffee grounds and highlights the promising potential of M-CBC for treating Cu(II)-containing industrial wastewater due to its high efficiency and easy recoverability. Download: Download high-res image (142KB) Download: Download full-size image

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF ALLOYS AND COMPOUNDS · 2026 · IF 6.7

Confinement of Sn-Cu synergized low-lead CsSn0.7Cu0.1Pb0.2Br3 quantum dots in halloysite nanotubes toward stable and sustainable optoelectronic applications

Yukun Liu,Zekun Wang,Yuanyuan Zhang,Chenguang Yang,Tonglu Sun,Cian Xie,Hao Ding,Lefu Mei,Yangai Liu,Yue Wang

The commercialization of cesium lead halide perovskite quantum dots (QDs) is hindered by lead toxicity and poor stability. We propose a synergistic “chemical-physical” dual-confinement strategy. Chemically, Sn 2 + and Cu 2+ are co-doped into CsPbBr 3 , forming low-lead CsSn 0.7 Cu 0.1 Pb 0.2 Br 3 QDs, where Sn 2+ tunes the bandgap and Cu 2+ passivates Sn-related defects. Physically, QDs are in-situ grown within halloysite nanotubes (HNTs), a natural clay, serving as a nanoreactor and barrier. Silane modification enhances hydrophobicity. The composite exhibits high photoluminescence quantum yield (73.46%), excellent thermal reversibility, and remarkable water resistance (86% intensity retention after 12 h). Applications include a wide-color-gamut white light-emitting diode (122.1% of National Television System Committee (NTSC)) and an efficient visible-light photocatalyst for methylene blue degradation. This work provides a sustainable pathway for stable, low-toxicity perovskite materials in optoelectronics and environmental remediation.

CAS / MDL: 1332-58-7
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。