文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第2893至2904个,产品总数3,922个

切换升序
MXene
Materials · 2024 ·Vol. 17 ·期 6 ·1389 · IF 3.1

Flexural Properties and Failure Mechanisms of Short-Carbon-Fiber-Reinforced Polylactic Acid Composite Modified with MXene and GO

Xu Wang,Shao-Cong Li,Duo-Wen Xiang,Min Gao,Hong-Mei Zuo,Dian-Sen Li

Recently, short-fiber-reinforced thermoplastic composites (SFRTPCs) have been playing a more and more crucial role in the application of automotive interior materials due to their advantages of low density and environmental resistance properties. However, their relevant mechanical properties need to be optimized. Previous investigations revealed that the surface modification of fibers is useful to improve their mechanical properties. In this work, carbon fiber (CF)-reinforced polylactic acid (PLA) composites modified with MXene and graphene oxide (GO) were prepared by twin-screw extrusion and injection molding methods. Short CF was firstly modified with polyetherimide (PEI), then different weight ratios of MXene-GO (1:1) were subsequently modified on PEI-CF. Finally, the flexural properties and failure mechanisms were analyzed. The results showed that MXene-GO was successfully coated on CF surface, and the flexural strength and modulus of CF-PEI-MXene-GO-reinforced PLA (CF-PEI-MG/PLA) composite were improved compared to that of CF/PLA composite. In addition, the fracture sections of the composites were flat and white, and the fibers bonded well with PLA for CF-PEI-0.1MG/PLA composite compared to CF/PLA composite. The present study could provide a reference for further improving the mechanical performance of PLA-related composites.

CAS / MDL: 9002-98-6
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
Microsystems & Nanoengineering · 2025 ·Vol. 11 ·期 1 ·248 · IF 9.9

A hot-humid tolerant and antibacterial MXene-based hydrogel sensor for real-time cardiorespiratory monitoring in endurance sports

Wang Xiaoyan,Xu Hongcheng,Zhang Chuanyu,Lim Eng G.,Zhao Yinchao,Hoettges Kai,Wei Xueyong,Lu Qifeng,Niu Fuzhou,Song Pengfei

Wearable sensors for continuous physiological monitoring during intense exercise face significant challenges, including motion artifacts and skin discomfort. Conductive hydrogels offer a promising solution due to their skin-like flexibility and excellent electrical conductivity, yet their application in extreme conditions like marathon running remains challenges. Here, we develop a MXene-based dual-network hydrogel composed of polyvinyl alcohol (PVA) and tempo-oxidized cellulose nanofibers (TOCNF) crosslinked with MXene nanosheets and borax. This hydrogel exhibits exceptional environmental stability (35 days at 4 °C and 30% relative humidity) and strain sensitivity (gauge factor of 7.79 at 800% strain), while MXene integration provides outstanding antibacterial properties (>99% inhibition). As a proof of concept, under simulated marathon conditions (38°C, 52% relative humidity), the sensor maintains stable performance for 6 h, demonstrating reliable heart rate and respiration monitoring. These capabilities are crucial for identifying early signs of cardiorespiratory abnormalities during endurance sports. Our work presents a robust strategy for developing wearable hydrogel sensors with long-term reliability in extreme environments, offering significant potential for sports medicine, exercise physiology, and continuous health monitoring applications.

CAS / MDL: 7789-24-4
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
JOURNAL OF COLLOID AND INTERFACE SCIENCE · 2025 · IF 9.7

Dual-mode strain sensor based on porous MXene/TPU fiber and mechanochromic photonic crystal for human motion detection

Jinfeng Liu,Chengcheng Wang,Liping Zhang,Shaohai Fu

As a critical component for real-time monitoring in smart wearable devices, dual-mode strain sensors offer instantaneous responses to mechanical stimuli through optical and electrical signals, playing a crucial role in monitoring human physiological states in real time. Here, an innovative dual-mode strain sensing fiber was designed and fabricated by integrating PS@P(MMA-BA) photonic crystal nanospheres onto MXene/TPU electrical sensing fibers. It swiftly responds to strain stimuli while simultaneously delivering optical and electrical signals. Based on the advantages of preparation methodology and sensing sensitivity, the smart fiber sensor exhibits rapid fabrication, angle-independent structural color, dynamic visual color change, a wide strain range (0–50 %), and high sensitivity (GF: 22.55 at 10 %). The design concept of dual-mode strain sensing fiber holds promising applications in wearable technology for real-time monitoring of human–machine interaction, health tracking, and smart wearable devices.

CAS / MDL: 96-05-9
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
ACS Applied Materials & Interfaces · 2025 · IF 8.2

Designing a Layered MXene–PA–GA Hybrid Composite with Rust Conversion and Extensive Barrier Performance for Corrosion Prevention

Yihan Song,Xu Ren,Yue Xiao,Zhihao Xiong,Qi Wang,Bin Liu

The continuous development of the global marine industry has posed significant challenges to sustainable development due to corrosion in marine engineering structures. While rust converters are regarded as cost-effective solutions for corrosion mitigation, existing technological advancements fail to meet the heightened demands of contemporary marine engineering practices. To address these limitations, an MXene–phytic acid–gallic acid (M–P–G) hybrid composite was synthesized by integrating two-dimensional nanomaterial Ti3C2Tx with organic acids (gallic acid and phytic acid). This composite achieved synergistic enhancement in both rust-conversion capability and corrosion inhibition performance. Experimental results demonstrated that the M–P–G composite with a mass fraction of 1.0 wt % formed a dense rust-conversion layer on substrates, significantly improving protective performance. The M–P–G/epoxy (EP) coating exhibited an impedance modulus of 1.51 × 109 Ω cm2, surpassing conventional coatings by 2 orders of magnitude. Furthermore, through density functional theory calculations combined with scanning electron microscopy, X-ray photoelectron spectroscopy, X-ray diffraction, and Fourier transform infrared analyses, a corrosion protection mechanism was proposed. This mechanism elucidated the differential conversion capacities of the organic acids toward diverse corrosion products, providing critical insights for the rational design and evaluation of next-generation rust-conversion and anticorrosion materials.

CAS / MDL: 7789-24-4
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
ACS Nano · 2025 · IF 16

MXene-Based Cartilage-Adhesive Microspheres for Photothermal-Controlled Hydrophobic Drug Release and Mesenchymal Stem Cell Delivery in Osteoarthritis

Fan Chen,Wenzhe Wang,Hengxin Zhao,Zian Zhang,Nanyu Pang,Yijie Tang,Tian Wang,Chang Liu,Zhenchao Huang,Feiyu Mou,Chaoqun Yu,Haining Zhang

Intra-articular drug injection is an effective treatment for osteoarthritis (OA). However, the rapid clearance of drugs from the joint cavity results in low drug utilization and suboptimal therapeutic outcomes. This study describes MXene-based cartilage-adhesive microspheres for photothermal-controlled hydrophobic drug release and bone marrow mesenchymal stem cell (BMSC) delivery. Nano cationic amylose (NCA) was obtained by modifying amylose with glycidyltrimethylammonium chloride (GTAC), and hydrophobic drug Kartogenin (KGN) was encapsulated in the hydrophobic helical cavity of NCA through ultrasonic treatment, resulting in nano cationic amylose@KGN complexes (NCA@KGN). HAMA/MXene-NCA@KGN (H/M-NCA@KGN) microspheres were prepared using a microfluidic device. These microspheres exhibited excellent biocompatibility, effectively adhered to the cartilage surface, and carried BMSCs. H/M-NCA@KGN microspheres demonstrated photothermal-controlled release of the hydrophobic drug KGN. Notably, KGN promoted the differentiation of BMSCs into chondrocytes, thereby improving the loss of extracellular matrix in joint cartilage. Additionally, appropriate thermal stimulation induced the expression of heat shock protein 70 (HSP70) in OA chondrocytes, providing a protective effect and delaying the progression of OA. H/M-NCA@KGN microspheres enable controlled hydrophobic drug release and stem cell delivery for potential OA treatment applications.

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
Catalysis Science & Technology · 2025 · IF 4.2

Near-infrared-activated NaYF4:Yb3+,Tm3+@g-C3N4@WO3@MXene photocatalytic system for enhanced removal of tetracycline antibiotics

Dongfang Han,Li Niu,Yuangong Ma,Youlin Huang,Wen-Sheng Zhang

To utilize near-infrared (NIR) light within the solar energy spectrum, we have engineered an advanced composite of NaYF4:Yb3+,Tm3+@g-C3N4@WO3@MXene (denoted as NYT@g-C3N4@WO3@MXene) capable of absorbing NIR light to facilitate photocatalytic reactions. This environmentally benign system integrates semiconductor heterostructures (g-C3N4 and WO3) with upconversion nanoparticles (NaYF4:Yb3+,Tm3+, abbreviated as NYT) and Ti3C2 MXene nanosheets. Experimental validation demonstrated exceptional performance in antibiotic remediation, with the composite achieving 86.3% tetracycline decomposition over 12 hours under NIR irradiation through synergistic mechanisms, while also exhibiting good cycling stability. The enhanced photocatalytic activity arises from collaborative effects between upconversion luminescence, optimized charge transfer pathways within the heterojunction architecture, and the visible light absorption characteristics of MXene.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Applied Materials Today · 2025 · IF 6.9

Multidimensional CoS2/C/MXene nanofiber heterostructures with synergistic magnetic-dielectric coupling for ultra-strong and broadband microwave absorption

Yashan Huo,Lei Zhang,Yujia Tan,Yang Liu,Mingjuan Wang,Minshan Zhao,Siyuan Huo,Peng Gao,Qi Jin,Zhihui He

Designing lightweight microwave absorbers that simultaneously achieve strong attenuation and broad bandwidth remains a major challenge. Here, we report a multidimensional CoS 2 /C/MXene heterostructure constructed through electrospinning and in-situ sulfidation, which integrates 0D CoS 2 nanoparticles, 2D MXene nanosheets, and a 1D conductive carbon-fiber network. This architecture generates abundant heterogeneous interfaces and continuous electron pathways, enabling synergistic magnetic-dielectric coupling and optimized impedance matching. The resulting composite achieves a minimum reflection loss of ‒70.86 dB at 10.6 GHz and an effective absorption bandwidth of 4.64 GHz at a low filler loading of 3 wt%. DFT calculations reveal significant interfacial charge transfer and built-in electric field formation, corroborating the enhanced polarization and conduction losses. Moreover, the composite exhibits excellent thermal stability, corrosion resistance, and mechanical flexibility. This work demonstrates an efficient strategy for constructing high-performance, low-density microwave absorbers through multidimensional heterostructure engineering.

CAS / MDL: 7664-39-3 196506-01-1
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2025 · IF 13.2

A high-performance flexible ammonia sensor with PANI/MXene nanocomposite and temperature compensation for smart fish freshness monitoring

Laizhao Guo,Wentao Huang,Jie Xia,Guangfen Wei,Mai Thi Tuyet Nga,Xiaoshuan Zhang

Sea bream has gained widespread popularity for its succulent flesh and high nutritional value. However, inadequate control of packaging conditions during storage and transportation renders this high-protein fish particularly susceptible to spoilage. Therefore, this paper proposes a high-precision, flexible ammonia sensing system (FASS) with temperature decoupling for detecting fish freshness, so as to enhance food quality and safety. The FASS primarily comprises a flexible ammonia sensing unit, a temperature decoupling unit, back-end circuitry, and a power supply module. Utilizing processes such as magnetron sputtering and laser direct writing, the ammonia sensing unit and temperature decoupling unit were fabricated on a PET substrate and the PANI/MXene gas-sensitive materials were successfully prepared through PANI polymer modification. During gas-sensing response testing, the ammonia sensing unit exhibited a response/recovery time of 49/307 s for 10 ppm ammonia, with a sensitivity of 18.102 % ppm −1 within 2–10 ppm. With the combination of the temperature decoupling unit, a three-dimensional fitting surface was constructed for the gas response of the ammonia sensing unit, temperature, and ammonia concentration within the 0–30 °C range, achieving a goodness-of-fit of 0.99 and enabling precise ammonia concentration detection across a broad temperature and humidity range. Finally, the reliability of the FASS application was validated during fish meat storage. By integrating a Bi-LSTM model for temporal prediction of ammonia concentrations, an RMSE of merely 0.073 ppm was achieved.

CAS / MDL: 62-53-3 7727-54-0
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF ALLOYS AND COMPOUNDS · 2025 · IF 6.3

Oxidation-resistant, stable and flexible Ti3C2Tx MXene/Polyimide composites for high-performance electromagnetic interference shielding and thermal management

Ziheng Ye,Feihua Liu,Xiaoai Ye,Kaizheng Gao,Jingjing Luo,Xiangli Liu,Weiwei Zhao

Ti 3 C 2 T x MXene with outstanding physicochemical properties have shown huge potential in electromagnetic interference (EMI) shielding applications. However, the poor chemical stability and mechanical fragility have seriously hindered their practical use. Herein, we developed a novel pyrimidine-containing polyimide (PPI) and constructed Ti 3 C 2 T x /PPI (MP) composite films . The incorporation of PPI not only suppresses the oxidation of Ti 3 C 2 T x by forming Ti-N x interactions between the nitrogen-rich pyrimidine rings of PPI and the Ti centers of Ti 3 C 2 T x , but also enhances mechanical strength and durability of the composite film across a wide temperature range (-196–250 ℃). Compared with Ti 3 C 2 T x film, the MP film exhibits significantly improved oxidation resistance , which the EMI SE of MP film did not decrease after 14 days in 80 ℃/80 RH environment when the weight ratio of Ti 3 C 2 T x and PPI reaches 11:4. Merely 1.4 dB decrease in EMI SE of the MP film was revealed after 200,000 bending cycles with a radius of 2 mm, and the EMI SE remained virtually unchanged after bending in liquid N 2 . Moreover, the composite film demonstrates excellent thermal management properties, including rapid thermal response, efficient electrothermal conversion, excellent durability and stability. The combination of desirable EMI shielding ability, ultrahigh flexibility, superior stability and durability, as well as ideal thermal management performance gives this material excellent potential for various applications.

CAS / MDL: 1823-59-2 2434-56-2
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2025 · IF 13.2

A MXene modification strategy of Prussian blue cathodes toward a stable cathode electrolyte interphase and suppressed Mn dissolution

Zerui Chen,Yingxinjie Wang,Jie Wang,Xiaohui Li,Guohao Li,Ziying Zhang,Zhenjun Wu,Xiuqiang Xie,Nan Zhang

Manganese-based Prussian blue analogues (PBA) have garnered widespread attention as the promising cathode materials for sodium-ion batteries. However, the inevitable Jahn-Teller distortion and the formation of unstable and uneven cathode electrolyte interphase (CEI) result in severe Mn dissolution and poor cycling stability. Herein, we report a simple MXene modification strategy cold pressing method to embed Prussian blue cathode materials into MXene nanosheets. This highly conductive protective barrier not only mitigates the Jahn-Teller distortion in Mn-PBA and maintains the integrity of the particles during charge–discharge cycles, but also partially suppresses side reactions between the electrolyte and cathode interface through surface functional groups (−F), resulting in a thin and uniform CEI. The protection of the stable CEI and MXene nanosheets simultaneously alleviate the Jahn-Teller effect and suppress the Mn dissolution during long cycling, thus allowing the cathode material to retain ∼ 80 % of its capacity after 1000 cycles at a current density of 1000 mA g −1 . This study highlights the importance of stabilizing the cathode interface and provides a novel approach for preparing highly stable manganese-based PBA cathode.

CAS / MDL: 7789-24-4
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ACS Applied Electronic Materials · 2025 · IF 4.7

MXene Empowers Recycled Chewed Gum for Bioelectronics and Wearable Sensors: Toward the Sustainable, High-Value Utilization of Waste

Xiaoqi Yin,Kangning Sun,Jing Cui,Hanyu Zhang,Xiankai Li

Growing resource scarcity and environmental urgency drive innovative strategies to transform waste into high-value materials for sustainable development. While chewing gum offers health benefits for oral hygiene and psychological well-being, its nondegradable polymeric composition creates environmental pollution when improperly discarded. Herein, chewed gum composites are fabricated by integrating MXene nanosheets into the gum through multiple stretching and kneading methods, realizing a superior electrical conductivity of 400 S m–1 and excellent adhesion to various substrates. The resultant chewed gum with self-healing properties can serve as flexible sensors capable of detecting human movement, which shows its promising potential for wearable smart sensors. In addition, combined with the photothermal effect of MXene nanosheets, the composites exhibit highly efficient solar-to-thermal conversion and can be constructed as a thermoelectric generator with an output voltage of 135 mV when exposed to 1 sun illumination. Thus, this study not only provides insights into the versatility of chewed gum as applied in flexible electronics, wearable sensors, and energy harvesting but also offers promising potential for high-value utilization to address the environmental issue of chewed gum waste.

CAS / MDL: 7789-24-4 9005-38-3
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Materials Today Communications · 2025 · IF 4.5

Stretchable and pH-sensitive liquid metal/mxene hydrogels for antibacterial environment creation and photothermal therapy of infected wounds

Wenqiang Zhang,Hongjie Guo,Xiang Zhang,Hongliang Li

Wound infection remains a significant challenge in clinical medicine, impeding the healing process of wounds. Conventional therapeutic approaches, including antibiotics, surgical debridement, and conventional dressings, are often limited by issues such as antibiotic resistance, secondary tissue damage, and insufficient biocompatibility. Existing wound dressings exhibit poor mechanical properties and possess only single therapeutic functions, lacking the ability to effectively monitor wound healing status. To address these limitations, this study have developed a novel hydrogel dressing. This dressing utilizes microfibrillated cellulose (MFC) to stably encapsulate liquid metal (Ga) droplets, which also serve as a photothermal filler for the hydrogel. The addition of MXene stabilizes the colloidal system, and the resulting hydrogel is integrated with a pH-sensitive optical fiber to form a pH-sensitive optical fiber/ PMGa hydrogel. This composite hydrogel exhibits excellent mechanical properties (400 % elongation at break), antimicrobial activity, and pH sensitivity. Moreover, the hydrogel's tissue adhesion and stretchability enable it to conform to various skin surfaces and accommodate skin movement and stretching. The pH-sensitive optical fiber/PMGa hydrogel not only monitors the pH value of the wound through different light transmittance to judge the state of the wound environment, but also effectively inhibits bacterial growth through its photothermal effect. It provides an optimal temperature and humidity environment to promote cell proliferation and granulation tissue formation, thereby facilitating photothermal therapy. In summary, this work presents a novel hydrogel dressing that integrates monitoring and therapeutic functions. This comprehensive solution offers a new platform for the development of wound infection treatment materials.

CAS / MDL: 81-88-9
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。