JOURNAL OF ALLOYS AND COMPOUNDS
·
2018
·
IF 3.779
Guozhen Liu,Xinguang Yuan,Yanmin Yang,Jianming Tao,Yubin Chi,Lixun Hong,Zhiya Lin,Yingbin Lin,Zhigao Huang
Wreath-like Co 3 O 4 particles consisting of microplates are synthesized by a facile solvothermal method and subsequently surface-modified with TiO 2 ultrathin layer using a low-temperature hydrolysis process. Comparing with pure Co 3 O 4 , Co 3 O 4 @TiO 2 exhibits superior electrochemical performances in terms of reversible capacity, rate capability and cycling stability. Co 3 O 4 @TiO 2 exhibits high reversible capacity of 813.0 mAhg −1 at 500 mAg −1 after 180 cycles while the pristine Co 3 O 4 only has a discharge capacity of 512.5 mAhg −1 . The filling of TiO 2 nanoparticles in porous Co 3 O 4 sheets and the TiO 2 -coating on Co 3 O 4 surface, could effectively suppress large volume expansion of Co 3 O 4 and consequently enhance structural stability during the Li-ion insertion/extraction processes. Analysis from the electrochemical measurements reveals that the improved performances should be attributed to reduced the charge-transfer resistance and enhanced Li-ion diffusion kinetics because of TiO 2 -coating. In addition, the reduced work function induced by TiO 2 -coating is helpful to facilitate electron transfer in composites. Moreover, the built-in electric field resulting from the difference in work function between Co 3 O 4 and TiO 2 , would facilitate electron-transfer and Li-ion migration across heterojunction interfaces.
✓ 已验证
DOI
高影响因子
Journal of Materials Chemistry A
·
2022
·Vol. 10
·期 45
·24269-24279
·
IF 14.511
Shundong Guan,Kaihua Wen,Ying Liang,Chuanjiao Xue,Sijie Liu,Jinyao Yu,Zheng Zhang,Xinbin Wu,Haocheng Yuan,Zhiyuan Lin,Haijun Yu,Liangliang Li,Ce-Wen Nan
High-performance polymer electrolytes are desirable for developing solid-state lithium (Li) metal batteries (SSLMBs) with enhanced safety and high energy density; however, their applications are hindered by low ionic conductivity and uncontrolled Li-dendrite growth. Here, a poly(vinylidene fluoride) (PVDF)-based polymer electrolyte with an organic additive, 2-acrylamido-2-methylpropane sulfonic acid (AMPS), is synthesized. First, AMPS improves the Li+ conduction by reducing the crystallinity of PVDF and immobilizing the anions. Second, AMPS assists with the formation of a LiF/Li2Sx/Li2SO3/Li3N-rich interface between Li metal and the AMPS-PVDF polymer electrolyte (AP-PE), which effectively suppresses the growth of Li dendrites. Consequently, the AP-PE with a thickness of ∼28 μm shows a high ionic conductivity of 2.2 × 10−4 S cm−1 at 26 °C, corresponding to an ultrahigh areal conductance of 78.6 mS cm−2. Meanwhile, the AP-PE shows a large Li+ transference number of ∼0.49, good electrochemical stability against a Li metal anode, and improved cycling stability in LiFePO4- and LiCoO2-based SSLMBs.
✓ 已验证
DOI
高影响因子
FIBERS AND POLYMERS
·
2016
·Vol. 17
·期 2
·194-198
·
IF 1.022
Xing Guiying
Aminated polyacrylonitrile (PAN-NH) nanofiber mats prepared by electrospinning and then aminated by multiamines with different chemical structures have been used for the immobilization of palladium. The PAN-NH fiber morphologies were characterized by scanning electron microscopy (SEM) and the dispersion of palladium particles on the PAN-NH fiber were examined by transmission electron microscopy (TEM). The catalytic activity and recyclability of the prepared heterogeneous palladium catalysts have been evaluated by the Heck reaction of iodobenzene with n -butyl acrylate. It was found that the catalytic activities of PAN-NH-Pd catalysts could be correlated with the chelating energies of the PAN-NH fiber mats with Pd active species.
✓ 已验证
DOI
高影响因子
NEW JOURNAL OF CHEMISTRY
·
2022
·Vol. 46
·期 33
·16035-16039
·
IF 3.925
Jing Zhang,Chunlei Li,Xingzhi Jin,Yi Zheng
Shape anisotropic semiconductors are advanced catalysts for resolving energy crises. However, modification studies are still needed to overcome their intrinsic disadvantages, such as the lack of active sites. With this aim, an excellent hydrogen evolution photocatalyst Rh@Cr2O3-loaded PbMoO4 twenty-six facet polyhedron (PM/Rh@Cr2O3) has been synthesized by a liquid method. Based on XPS, electrochemical investigation and hydrogen evolution reaction (HER) test, it is demonstrated that Rh acts as an electron collector and active site; moreover, Cr2O3 can assist Rh in the dissociation of water. In addition, Cr2O3 can also inhibit the reverse reaction of water splitting as well as the mass transfer of water. In conclusion, the H2 yield rate increased from 0 μmol g−1 h−1 of PbMoO4 (PM) to 704 μmol g−1 h−1 of PM/Rh@Cr2O3, and PM/Rh@Cr2O3 exhibited excellent photo-stability.
✓ 已验证
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2017
·
IF 3.133
Lei Hu,Ruohan Lu,Lingfei Tang,Ran Xia,Chunfu Lin,Zhibin Luo,Yongjun Chen,Jianbao Li
As a recently developed anode material for lithium-ion batteries, Ti 2 Nb 10 O 29 shows high theoretical/practical capacities and safety, but suffers from a poor rate capability due to its insulator nature and insufficient Li + -ion diffusion coefficient . To tackle this issue, a strategy combining nanosizing, Cr 3+ –Nb 5+ co-doping and carbon nanotube (CNT) compositing is employed. A novel TiCr 0.5 Nb 10.5 O 29 /CNTs nanocomposite with 9.1 wt% CNTs is fabricated by a direct hydrolysis process followed by calcination in N 2 . The Cr 3+ –Nb 5+ co-doping significantly improves the electronic conductivity and Li + -ion diffusion coefficient of Ti 2 Nb 10 O 29 by three orders and one order of magnitude, respectively. The CNT compositing not only enhances the electrical conduction among the TiCr 0.5 Nb 10.5 O 29 particles but also hinders the particle growth in the hydrolysis process, leading to the small particle sizes. Due to the synergistic effect of these advantages, the TiCr 0.5 Nb 10.5 O 29 /CNTs nanocomposite exhibits a high rate capability with a high capacity of 206 mAh g −1 at 20 C, surpassing those of Ti 2 Nb 10 O 29 (145 mAh g −1 ) and TiCr 0.5 Nb 10.5 O 29 nanoparticles (187 mAh g −1 ). Additionally, TiCr 0.5 Nb 10.5 O 29 /CNTs delivers a high reversible capacity (297 mAh g −1 at 0.1 C) and cyclic stability (95.0% capacity retention after 100 cycles at 10 C). This good electrochemical performance reveals that TiCr 0.5 Nb 10.5 O 29 /CNTs can be an advanced anode material for high-performance Li + -ion storage.
✓ 已验证
DOI
高影响因子
ELECTROCHIMICA ACTA
·
2017
·
IF 4.798
Xiangjian Liu,Wenxiu Yang,Lulu Chen,Jianbo Jia
Metal and metal oxides with various nanostructures have been widely studied in non-enzymatic glucose sensing. In this work, we report an efficient catalyst platform, which is made of three-dimensional copper foam (CF) skeleton and copper oxide nanowire arrays (CuONWA), is used to construct glucose sensor. The three-dimensional CuONWA/CF was synthesized via a facile wet-chemical method and subsequent annealing. The CuONWA is evenly covered by CuO nanoflowers . The morphology and composition of the platform were characterized. The nanowire arrays and nanoflowers both enhanced the electrocatalytic performance of the integrated electrode via greatly increasing the surface area of the CF substrate. The electrocatalytic properties of the non-enzymatic glucose sensor were characterized by a series of electrochemical measurements. The sensor exhibits excellent performance, with a linear range of 0.10 μM–0.50 mM, a sensitivity of 32330 μA mM −1 cm −2 , a low limit of detection of 20 nM (S/N = 3), excellent selectivity, reproducibility, and stability. The sensor was also used for glucose sensing in human serum and Wahaha ice black tea, with relative standard deviations (for n = 6) of 3.15% and 2.43%, respectively.
✓ 已验证
DOI
高影响因子
CATALYSIS LETTERS
·
2018
·Vol. 148
·期 8
·2418-2431
·
IF 2.911
Sun Rong,Huang Wan,Zhang Qian,Hong Jun-ming
Abstract This study developed nitrogen-doped graphene/Pt/TiO 2 (N-GN/Pt/TiO 2 ) as anode to effectively degrade aminophenol (APAP) in electrocatalytic process. Due to the different physicochemical properties of graphene with various N species loading, the efficiency of catalysts was novelty discussed. The morphology, N-doped content/species, and the graphene defects of the catalyst were analyzed by TEM, FTIR, XPS, EA, and Raman spectroscopy. The results show that the doping morphology of the N atoms gradually shifted from pyridinic N and pyrrolic N to graphitic N with increased hydrothermal time, in order to decrease the defect degrees and redox activity. However, the conductivity of material increased with the graphitic N generation. The best APAP degradation efficiency (100% with 20 mA, 1 g/L NaCl, and initial pH 3.0) can be achieved with 1.5-N-GN/Pt/TiO 2 (mainly pyridinic N and pyrrolic N doping). A detailed investigation was conducted to determine the oxidation intermediates of APAP using GC-MS analysis. Finally, a possible degradation pathway was proposed. Graphical Abstract
✓ 已验证
DOI
高影响因子
MOLECULES
·
2011
·Vol. 16
·期 10
·8463-8474
·
IF 1.988
Haibo Xie,Zongbao K. Zhao
A new compound was detected during the production of 5-hydroxymethylfurfural (HMF) from glucose and cellulose in the ionic liquid 1-butyl-3-methylimidazolium chloride ([Bmim]Cl) at high temperatures. Further experiments found that it was derived from the reaction of HMF with [Bmim]Cl. The structure of new compound was established as 1-butyl-2-(5’-methyl-2’-furoyl)imidazole (BMI) based on nuclear magnetic resonance and mass spectrometry analysis, and a possible mechanism for its formation was proposed. Reactions of HMF with other imidazolium-based ionic liquids were performed to check the formation of BMI. Our results provided new insights in terms of side reactions between HMF and imidazolium-based ionic liquids, which should be valuable for designing better processes for the production of furans using biomass and related materials.
✓ 已验证
DOI
高影响因子
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
·
2018
·
IF 4.514
Yujia Kou,Wenying Zhou,Bo Li,Lina Dong,Yu-E Duan,Qianwen Hou,Xiangrong Liu,Huiwu Cai,Qingguo Chen,Zhi-Min Dang
Epoxy (EP) modified with nonpolar rubbers have the potential to achieve a concurrent improvement in mechanical and dielectric properties , when the EP-rubber interface is properly manipulated. Here we investigate rubber toughened EP based on a non-polar hydroxyl terminated polybutadiene (HTPB), and a coupling agent, dimer fatty acid diisocyanate (DDI), in which the rubber is covalently bonded to the epoxy. The mechanical and dielectric properties can be improved with the addition of HTPB and are maximized at 15 phr of elastomer inclusion. The enhanced mechanical toughness is attributed to the extensive shear yielding induced by a large amount of uniformly dispersed rubber particles; the same morphology can also combine the good insulating properties of HTPB and dielectrically favorable interfaces. These facts along with the reduced dielectric constant and loss for the modified EP suggest that the HTPB-DDI-EP can be used as a promising insulating packaging material for microelectronic applications.
✓ 已验证
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2020
·
IF 8.758
Yadong Yu,Kangren Kong,Zhao Mu,Yueqi Zhao,Zhaoming Liu,Ruikang Tang
Inspired by inorganic oligomers and their polymerization, we herein develop a heterogeneous inorganic polymerization tactic that can be used to prepare a muscle-like hybrid hydrogel by inducing the polymerization of calcium phosphate oligomers (CPO) onto a polyvinyl alcohol (PVA) molecular chain network. In this heterogeneous process, the CPO units bond with PVA molecules via assistance from sodium alginate (SA), and then gradually polymerize along the organic chains to form ultrafine hydroxyapatite nanolines with a diameter of ∼1 nm. Because of the well integration of organic and inorganic phases from the heterogeneous polymerization, the hierarchical structured hydrogel can exhibit ultratough mechanical properties of ∼17.84 MPa in strength and ∼8.97 kJ m–2 in fracture energy, which exceed natural muscles and almost synthetic hydrogels. Moreover, the damaged hydrogel can be repaired readily by adding the precursors of CPO, PVA, and SA, which can induce in situ re-polymerization. The hydrogel also exhibits muscle-like rotational motion under aqueous conditions, which can be developed into a water-driven biomimetic motor. This study indicates that inorganic polymerization can achieve a novel organic–inorganic integration rather than conventional organic–inorganic composition, and it provides a novel tactic for design and manufacture of advanced materials.
✓ 已验证
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING SCIENCE
·
2015
·
IF 2.337
Zhen Song,Teng Zhou,Jianan Zhang,Hongye Cheng,Lifang Chen,Zhiwen Qi
When applying ionic liquids (ILs) for solvent-sensitive extraction systems, ILs dissolved in the raffinate may lead to severe subsequent problems or a significant reduction in product quality, and thus should be particularly concerned. To screen qualified IL solvent for such systems, a rigorous criterion considering both its solubility in the raffinate and extractive ability is established. The COSMO-RS model is used to evaluate the effect of anions and cations, and suggest potential ILs meeting the criterion. Afterwards, the solubility and extractive ability of candidate ILs are investigated by experiments to further confirm their suitability. The proposed solvent screening method is exemplified for the extractive desulfurization process. [C 4 mim][H 2 PO 4 ] is pre-selected by the screening method, and its high extractive performance is experimentally verified.
✓ 已验证
DOI
高影响因子
CHINESE JOURNAL OF CATALYSIS
·
2016
·
IF 2.628
Da Yang,Dongliang Wang,Huan Liu,Xiaoli Zhao,Yong Lu,Shijun Lai,Ye Liu
The neutral palladium(II) complex bis-[1-(5’-diphenylphosphinothiazol-2’-yl)-imidazolyl] dichloropalladium(II) ( 1A ) ligated by thiazolylimidazolyl-based phosphine ( L1 ) in which thiazolylimidazolyl acted as an S- and N-donor provider with weak coordinating nature, and the ionic complex bis-[1-(5’-diphenylphosphinothiazol-2’-yl)-3-methylimidazolium] dichloropalladium(II) trifluoromethanesulfonate ( 2A ) ligated by thiazolylimidazolium-based phosphine ( L2 ) after quaternization of L1 using methyl trifluoromethanesulphonate were synthesized. It was found that the introduced positive charges and strong electron-withdrawing effect in 2A not only led to changes in the configuration and structural stability of the complex, but also lowered its catalytic performance in carbonylative Sonogashira reactions. These effects reveal the important role of the N-donor in 1A . In addition, as an ionic palladium complex, 2A combined with the room-temperature ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate could be recycled eight times as the catalyst in carbonylative Sonogashira reactions without detectable metal leaching.
✓ 已验证
DOI
高影响因子