文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第2905至2916个,产品总数3,922个

切换升序
Mxene
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION · 2025 · IF 7.8

Construction of MXene-based laminar membranes with aminated Fe3O4 via electrostatic self-assembly for selective dye/salt separation

Yufen Kong,Hongdan Wu,Zhihui Zhou,Xianyuan Fan,Ming Li

To address the long-standing trade-off between flux and selectivity, as well as the structural instability of conventional nanofiltration (NF) membranes, this study proposes a novel intercalation strategy for constructing two-dimensional laminar NF membranes based on MXene for efficient dye/salt separation. Spherical Fe 3 O 4 nanoparticles were functionalized with amino groups using 3-aminopropyltriethoxysilane (APTES) to impart positive surface charges, and subsequently assembled onto hydrophilic MXene (Ti 3 C 2 T x ) nanosheets via electrostatic self-assembly, forming a structurally stable MXene/NH 2 -Fe 3 O 4 composite membrane. The surface functionalization of Fe 3 O 4 plays a critical role in regulating the interlayer structure of MXene, thereby enhancing membrane stability and selective transport performance. At a mass ratio of MXene to NH 2 -Fe 3 O 4 of 1:6, the membrane exhibited a pure water flux of 136.6 L/(m 2 ·h) and rejection rates of up to 99.9 % for Congo Red (CR) and Evans Blue (EB). In contrast, the rejection rates for NaCl, MgSO 4 , and Na 2 SO 4 were 7.0 %, 15.4 %, and 26.4 %, respectively. In mixed dye/salt systems, the membrane exhibited excellent selectivity, with separation factors of 839 for CR/NaCl, 704 for CR/MgSO 4 , and 566 for CR/Na 2 SO 4 , attributed to synergistic contributions of size exclusion, electrostatic repulsion, and the Donnan exclusion effect. Furthermore, the composite membrane demonstrated outstanding dye removal efficiency, acceptable salt rejection, and robust structural integrity under prolonged operation, wide pH variations, and challenging conditions involving organic foulants and surfactants, offering a practical strategy for developing advanced NF membranes for complex wastewater treatment.

CAS / MDL: 1317-61-9 919-30-2
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Journal of Energy Storage · 2025 · IF 9.8

Hydrogen bond crosslinked MXene aerogel/polyethylene glycol composite phase change materials with superior stability and photothermal conversion performance

Shiyuan Gao,Huibin Yin,Yongjun Xu,Jianfeng Lu

MXene aerogel based composite phase change materials exhibit great promise for solar thermal utilization, yet their mechanical strength and heat transfer property need to be further boosted. In this work, MXene/cellulose nanofibers (CNF)/poly(ethylene glycol) (PEG) composite phase change material (MCP) with robust and high thermal properties is successfully developed. MXene/CNF (MC) aerogels are constructed through CNF-assisted three-dimensional assembly of MXene nanosheets and incorporation of Al 3+ crosslinking, which afforded mechanical strength enhancement induced by metal ion coordination and hydrogen bonding interactions. With MC aerogel as the support framework, MCP has phase change enthalpy of no less than 167.1 J·g −1 , and the phase change enthalpy only decreases by 2.89 % after 500 cycles, showing high enthalpy and excellent thermal cycle stability. The electric field distribution of MXene during the photothermal conversion process is demonstrated by finite-difference time-domain (FDTD) simulation, which visually reveals the localized surface plasmon resonance effect of MXene. The highly vertically oriented 3D MXene framework effectively strengthens the directional heat transfer of the MCP, leading to the rapid completion of photothermal conversion and heat transfer processes, and thus realizing a photothermal conversion efficiency of more than 90 %. The MCP developed in this study is a valuable material for solar thermal energy storage in practical applications.

CAS / MDL: 7647-01-0 7789-24-4
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ANALYTICAL CHEMISTRY · 2025 · IF 6.7

An Engineered Au-MXene Sorption Trap Enables Dual-Channel Ultrafast and Selective Detection of Trace Gaseous Elemental Mercury

Mingze Jiao,Jia Chen,Lulu Yang,Qinyuan Hong,Yiqi Feng,Wenjun Huang,Bing Pei,Qianxuan Zhang,Qingyan Fu,Zan Qu,Naiqiang Yan,Haomiao Xu

Accurate detection of trace atmospheric mercury is critical for toxicological assessment and environmental protection. However, achieving parts per billion-level sensitivity with high selectivity between gaseous elemental mercury (Hg0) and oxidized mercury (Hg2+) remains a significant challenge. Here, we present a novel dual-channel enrichment trap system that selectively captures Hg0 by using a layered Au-MXene (Ti3C2Tx) composite as the sorption trap. This composite demonstrates exceptional selectivity for Hg0, with a selectivity ratio of up to 76.7 over Hg2+, and achieves 99.7% ± 0.3% (n = 3) sorption efficiency for ppb-level Hg0 within 30 min at room temperature. Complete desorption is achieved in just 90 s at 300 °C, demonstrating a response time of 45 s for Hg0 detection through the dual-electrothermal Hg0 channel. The Au–Ti3C2Tx preconcentration cartridge exhibits excellent moisture resistance, high-temperature stability, and long-term durability. Density functional theory (DFT) calculations reveal that the built-in electric field at the Au–Ti3C2Tx interface accelerates electron transfer, reducing preconcentration and regeneration times. This technology integrates seamlessly with the cold vapor atomic absorption spectrophotometer (CVAAS) method to form a mercury dual-channel continuous emission measurement system (Hg DCEMS), ensuring highly selective and precise trace Hg0 detection. This advancement provides a device for accurately measuring the Hg0 concentration, enabling better mercury pollution control.

CAS / MDL: 7789-24-4
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
COMPOSITES PART B-ENGINEERING · 2018 · IF 4.92

Improving the mechanical properties, UV and hydrothermal aging resistance of PIPD fiber using MXene (Ti3C2(OH)2) nanosheets

Nadia Taloub,Abdelkhalek Henniche,Li Liu,Jun Li,Nahla Rahoui,Mohammad Hegazy,Yudong Huang

The pursuit of improving the performance of rigid-rod polymeric fibers using a new inorganic nano-materials and efficient methods is very attractive topic. The combination of the unusual properties of both materials could definitely produce an outstanding final product. Herein, we proposed a simple grafting method of a graphene-like titanium carbides Ti 3 C 2 (OH) 2 nanosheets (MXene) onto PIPD surface via covalent bond by using (3-Aminopropyl) triethoxysilane (APTES) as a bridging agent. The surface morphology and element compositions of PIPD fiber before and after grafting were characterized, and the effect of such treatment on the mechanical properties was also evaluated. The IFSS of the PIPD-Ti 3 C 2 (OH) 2 was highly increased by 61.54% because of the significant improvement the fiber/epoxy interaction and surface wettability . Though the tensile strength (TS) was slightly decreased by only 5%. Furthermore, the experiment results showed a great enhancement of UV and hydrothermal aging resistance of the grafted fibers comparing with untreated ones by 33% and 25% respectively.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
ChemElectroChem · 2016 ·Vol. 3 ·期 6 ·871-876 · IF 3.506

Two-Step Oxidation of Mxene in the Synthesis of Layer-Stacked Anatase Titania with Enhanced Lithium-Storage Performance

Huang Tang,Shihao Zhuang,Zhihao Bao,Changshi Lao,Yongfeng Mei

Layer-stacked anatase titania (a-TiO 2 ) was synthesized with two-step oxidation of MXene (Ti 3 C 2 T x , T=O, OH, or F). Compared with direct oxidation of MXene in air, the two-step oxidation process involving additional hydrothermal pre-oxidation could alleviate the anomalous grain growth of TiO 2 , and largely keep the fine structure of MXene. The layered structure derived from MXene enabled the synthesized a-TiO 2 to exhibit superior electrochemical properties. Its discharge capacities reached 241.9 and 131.1 mA h g −1 at the current rates of 0.3 and 12 C, respectively. Even after 10 000 cycles at 6 C, its capacity remained at 107.1 mA h g −1 , which is approximately 70 % of the initial capacity. Cyclic voltammetry analysis showed that both diffusive lithium storage in the bulk and interfacial (pseudocapacitive) lithium storage at the surface of layer-stacked a-TiO 2 contributed to its electrochemical properties. Graphical a-OK ! Layer-stacked anatase titania (a-TiO 2 ) is synthesized through the two-step oxidation of MXene. The layered structure derived from MXene enables the synthesized a-TiO 2 to exhibit superior electrochemical properties. Its discharge capacities reach 241.9 and 131.1 mA h g −1 at current rates of 0.3 and 12 C, respectively. Even after 10 000 cycles at 6 C, the capacity is 107.1 mA h g −1 , which is approximately 70 % of the initial capacity.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY · 2021 · IF 8.067

Synergistic phosphorized NiFeCo and MXene interaction inspired the formation of high-valence metal sites for efficient oxygen evolution

Ning Li,Jingrui Han,Kaili Yao,Mei Han,Zumin Wang,Yongchang Liu,Lihua Liu,Hongyan Liang

Exploring low-cost, high-performance, and stable electrocatalysts toward the oxygen evolution reaction (OER) is highly desired but remains challenging. Transition metal hydroxide has been wildly utilized as a promising candidate, but practical implementation is impeded by insufficient catalytic activity, easy agglomeration, and poor conductivity. Here, we report that both phosphorization and combination with MXnene can improve the catalysts’ intrinsic activity and conductivity. Besides, MXene also prevents the agglomeration of the nanoparticles, resulting in the enhanced exposure of active sites. Experimental characterizing and density functional theory simulations revealed that P species can attract electrons to promote the formation of high-valence states of adjacent metal atoms, and coupling MXene support can effectively modulate the electronic structure and optimize the d -band center, which boosts the OER performance. Consequently, the optimized NiFeCoP/Mxene catalyst exhibits a low overpotential of 240 mV at a current density of 10 mA cm −2 , a small Tafel slope of 55 mV dec −1 , and superior long-term stability of 40 h in 1 M KOH electrolyte, which is superior to other counterparts.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2024 · IF 13.3

Enhanced interfacial interactions and enriched active sites in self-assembly amino-functionalized bacterial cellulose/MXene composite for wastewater treatment

Yuanyuan Xu,Zhiyuan Zhang,Zhou Cui,Lijin Luo,Peng Lin,Maojie Xie,Qiying Zhang,Baisheng Sa,Cuilian Wen

With rapid industrialization and economic growth, the serious environmental pollution caused by heavy metals and dyes is a pressing issue to be solved. The efficient construction of enriched active sites and porous structures is the key to obtain water purification material for pollution removal. In this study, an efficient electrostatic self-assembly strategy to achieve amino-functionalized bacterial cellulose/Ti 3 C 2 T x MXene (ABC/MX) composite with a 3D cross-linked porous structure has been proposed. Experimental characterization and theoretical calculations reveal that the successful incorporation of amino groups not only enhances the interfacial interactions between BC nanofibers and Ti 3 C 2 T x nanosheets, but also increases the active sites available for adsorption. The results highlight that the ABC/MX composite exhibits exceptional removal efficiency, with maximum adsorption capacities of 200.7 mg/g for Cr(VI) and 1103.7 mg/g for Congo red (CR). In particular, it reveals that the multifaceted adsorption processes of Cr(VI) and CR involve electrostatic interactions, reduction reactions, chelation, and hydrogen bonding effects. These findings highlight a versatile strategy for synthesizing BC-based adsorbents with remarkable adsorption properties and are suitable for practical wastewater treatment applications.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF ALLOYS AND COMPOUNDS · 2026 · IF 6.7

Gravity-driven self-assembly of thickness-direction asymmetric TA@MXene/WPU composite films for high-performance electromagnetic interference shielding

Yanru Yuan,Yingfan Li,Xu Peng,Dong Zhang,Ziyi Xu,Peiyi Gao,Jinghe Guo,Bohan Ding,Yanxiang Wang

With the rapid development of flexible electronics and wireless communication technologies, lightweight and flexible electromagnetic interference (EMI) shielding materials are in high demand. However, conventional homogeneous MXene/polymer composites often exhibit excessive surface reflection and insufficient internal electromagnetic attenuation. In this work, a tannic acid-modified MXene (TA@MXene)/waterborne polyurethane (WPU) composite film with a thickness-direction asymmetric structure was fabricated through a solution-casting process combining gravity-driven sedimentation and solvent evaporation. TA modification improved the dispersion stability of MXene nanosheets and facilitated the formation of an asymmetric conductive structure within the WPU matrix. The resulting composite film exhibited anisotropic electrical conductivity and effective EMI shielding performance in the X-band. At a TA@MXene loading of 12.5 wt%, the film achieved an EMI shielding effectiveness of 34.3 dB and an SSE/t value of 4975 dB cm 2 g −1 . In addition, the composite film maintained good mechanical flexibility, tensile strength, and improved flame-retardant performance. This work demonstrates an effective strategy for constructing multifunctional MXene-based flexible shielding materials through spatial regulation of conductive networks.

CAS / MDL: 7447-41-8 7664-39-3
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF MEMBRANE SCIENCE · 2026 · IF 8.8

Fabrication of photocatalytic antifouling 3D COFs/MXene membrane via oil–oil–water ternary strategy for efficient oil–water separation

Yanqing Qu,Jiahao Li,Xiaoyu Du,Hongge Jia,Jingyu Xu

With the acceleration of industrialization, oily wastewater poses a serious threat to the ecological environment. Membrane separation technology has emerged as a research hotspot due to its advantages of high efficiency and energy savings; however, membrane fouling significantly restricts its long term stable operation. This study introduces a 3D COFs/MXene composite membrane with photocatalytic self–cleaning capability for highly efficient oil–water separation. A well dispersed 3D COFs colloidal dispersion was prepared via oil–oil–water three phase interfacial polymerization, effectively overcoming the dispersion challenges of COFs materials. Ti 3 C 2 T x MXene nanosheets were synthesized using the LiF/HCl etching method. Using intermolecular hydrogen bonding, the two components were ultrasonically assembled, and a COFs/MXene composite membrane was fabricated via vacuum assisted filtration. The membrane exhibits excellent hydrophilicity (water contact angle as low as 54.3°) and underwater oleophobicity (underwater oil contact angle up to 144.9°). Under visible light irradiation, the MXene component generates reactive oxygen species (·O 2 − and ·OH), enabling photocatalytic degradation of oil contaminants adsorbed on the membrane surface and thereby imparting self–cleaning functionality. Separation performance tests reveal that the composite membrane achieves efficient separation of various oil–in–water emulsions, with a maximum water flux of 1918.9 L m −2 h −1 bar −1 . The flux for n –hexane emulsion increased to 2.1 times that of pure MXene membrane, while maintaining a rejection rate above 98.8%. Moreover, the membrane demonstrates excellent cycling stability and photocatalytic antifouling performance. This research offers a novel strategy for developing self–cleaning separation membranes and holds promising potential for application in oily wastewater treatment.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ANALYTICA CHIMICA ACTA · 2026 · IF 6.1

Investigation of electrode-free, room temperature, flexible NH3 sensors with high stability and sensitivity using MXene@PANI-MWCNTs ink

Jiahui Zheng,Bochao Ma,Xiaoqing Cui,Rui Wang,Li An,Bin Guo,Hongyan Zhang

Detecting ammonia (NH 3 ) is crucial for both the atmospheric environment and human health. However, developing low-cost, high-sensitivity, and flexible sensors for NH 3 is a significant challenge. Herein, we report a flexible, electrode-free NH 3 sensor based on an ink of polyaniline-covered MXene and multi-walled carbon nanotubes (MXene@PANI-MWCNTs), which was developed on cotton fabric using a dispensing print method. After optimizing the MXene@PANI-MWCNTs concentration, the number of sensor arms and the printed layers, the sensor exhibited a high response in the range of 0.5–25 ppm and can detect as low as 0.5 ppm NH 3 at 40% relative humidity (RH), room temperature (25°C). The response values were significantly higher than those for other interfering gases including H 2 , CO, H 2 S, and NO 2 . Furthermore, the sensor demonstrated excellent mechanical stability, with its response dropping by only 3.7% after 1000 bending cycles. When covered with expanded polytetrafluoroethylene (e-PTFE) film, the sensor showed stable performance in the ranging of 30%–90% RH at 25°C. Additionally, MXene@PANI-MWCNTs ink was printed on masks to detect NH 3 levels in breath, offering potential for medical diagnostics and personal health monitoring.

CAS / MDL: 7789-24-4
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Surfaces and Interfaces · 2026 · IF 6

A 3D MXene–CNT–Ag SERS platform with high enhancement and uniformity for quantitative analysis of complex botanical extracts

Xueying Zhang,Wei Lai,Mengdi Guo

Quality assessment of herbal medicines is complicated by their complex matrices and variability in chemical composition. In this study, a three-dimensional surface-enhanced Raman scattering (SERS) substrate was constructed for the analysis of Astragalus membranaceus extracts. The substrate consists of carboxylated carbon nanotubes (HOOC CNTs) integrated with Ti 3 C 2 T x MXene and decorated with in situ-grown silver nanoparticles (AgNPs), forming an interconnected porous network. This hierarchical architecture provides accessible plasmonic sites, while the CNT–MXene framework improves material dispersion and limits MXene restacking in aqueous media. The AgNP/HOOC CNT/Ti 3 C 2 T x substrate exhibited a measured SERS enhancement factor of 1.82 × 10 6 , together with improved signal uniformity and stability under the tested conditions. Quantitative calibration models were established for astragalosides, polysaccharides, and calycosin in A. membranaceus extracts with limited sample pretreatment, and the analytical results were compared with those obtained using reference methods. The measured chemical profiles also enabled preliminary discrimination among the investigated samples from different geographical origins and assessment of batch-to-batch variation. Among the samples included in this study, those collected from Jilin showed relatively high levels of the target constituents. These results indicate that the proposed SERS substrate has potential as a rapid analytical platform for compositional assessment and comparative quality evaluation of A. membranaceus . Further validation using larger and more geographically representative sample sets is required before the method can be applied to routine origin authentication and quality grading. Download: Download high-res image (370KB) Download: Download full-size image

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Journal of Environmental Sciences · 2026 · IF 6.5

An efficient peroxymonosulfate activation by Nb2CTx-MXene mediated with CQDs composite catalyst for carbamazepine degradation: Kinetics and mechanistic insights

Muhammad Adnan,Zhenhua Zhao,Liling Xia,Ghulam Abbas Ashraf,Arslan Tauqeer,Muhammad Usman,Saqib Bashir,Thamer Alomayri,Akmal Abilkasimov

Nb2CTx-MXene with CQDs-modified catalyst was rationally designed and synthesized. • The composite exhibited highly efficient PMS activation for CBZ degradation. • Synergistic radical and non-radical oxidation pathways were experimentally validated. • Identifying key active sites and the degradation pathways improved understanding of Nb2CTx@CQDs catalytic performance. Persistent organic pollutants present long-term risks to aquatic ecosystems, calling for oxidation processes with well-defined activation mechanisms. In this work, an Nb 2 CTx- MXene composite decorated with ginger-derived carbon quantum dots (Nb 2 CTx@CQDs) was constructed to investigate interfacial peroxymonosulfate (PMS) activation for carbamazepine (CBZ) degradation in water. The surface chemistry, textural properties, and electronic features of the composite were systematically characterized. The Nb 2 CTx@CQDs(5 wt.%)/PMS system achieved 94.7 % CBZ removal within 50 min, corresponding to a pseudo-first-order rate constant k of 0.0598 min -1 under optimized conditions. Density functional theory calculations, together with Liquid chromatography-mass spectrometry (LC-MS) analysis, revealed the evolution of key intermediates and supported a stepwise CBZ degradation pathway. Mechanistic results indicate that PMS activation is governed by coupled radical and non-radical processes, promoted by CQDs-modified Nb 2 CTx surfaces playing a decisive role while, the evaluation of ecotoxicity analysis of CBZ intermediates suggested that they are much less harmful for ecosystem. This study highlights the importance of MXene surface modulation with CQDs for regulating PMS activation pathways and provides mechanistic insights relevant to advanced oxidation processes for the degradation of organic pollutants. Download: Download high-res image (291KB) Download: Download full-size image

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。