ANALYTICA CHIMICA ACTA
·
2019
·
IF 5.256
Yan Cai,Ying Zhang,Wenjuan Yuan,Jun Yao,Guoquan Yan,Haojie Lu
For mass spectrometry (MS)-based N -glycoproteomics, selective enrichment of N -glycopeptides prior to MS analysis is a crucial step to reduce sample complexity. Enrichment based on covalent coupling is as an increasingly attractive strategy due to the unbiased and highly specific features. However, most of current covalent coupling reactions for N -glycopeptides enrichment are still limited by long coupling time and harsh coupling conditions. Herein, we developed a thiazolidine formation-based approach for ultrafast and highly efficient solid-phase extraction of N -Glycoproteome. With the use of facile synthesis of Cys-terminated magnetic nanoparticles , the oxidized glycan moieties on glycopeptides could be selectively captured by the β-amino thiols groups on the surface of magnetic nanoparticles through thiazolidine formation. The coupling could be achieved within 30 min under mild condition, eliminating the addition of toxic catalyst or sample-destroying reducing agent. Also, the great enrichment performance for N -glycopeptides were obtained in terms of sensitivity (low fmol levels), selectivity (extracting N -glycopeptides from the mixture of glycopeptides and non-glycopeptides at a 1:100 molar ratio) and reproducibility (CVs<26%). Finally, this proposed method was successfully demonstrated by analyzing the N -glycoproteome from 2 μL human serum, which offers an alternative purification method for analysis of N -glycoproteome from complex biological samples.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF MATERIALS SCIENCE
·
2019
·Vol. 55
·期 5
·2176-2185
·
IF 3.442
Ghorbani Marjan,Nezhad-Mokhtari Parinaz,Sohrabi Hessamaddin,Roshangar Leila
In the last years, chitosan (CS) nanofibers as one of the biodegradable biomaterials in nature for tissue engineering and related fields, including wound healing and cell–material interaction, have been widely used. For this purpose, we prepared the reinforced CS/nanocrystals cellulose-graft-poly( N -vinylcaprolactam) (CS/NCC-g-PVCL) nanofibers via the electrospinning technique. Fabricated nanofibers were characterized and studied for their structural, morphological, thermal stability, as well as mechanical and hydrophilic properties. Uniform nanofibers were achieved, and NCC-g-PVCL contents were partially embedded into CS nanofibers, as revealed in SEM analyses. Incorporation of NCC-g-PVCL contents (0.5, 2.5, and 5 wt%) enhanced the average fiber diameter of the obtained nanofibers from 100 nm (neat CS) to ∼ 350 nm [CS/NCC-g-PVCL (5 wt%)] and improved the nanofibers thermal stability. Additionally, among the CS/NCC-g-PVCL nanocomposite fibers, those loaded with 5 wt% NCC-g-PVCL had the best mechanical properties. The water contact angle of nanocomposite nanofibers increased with elevation of the weight content of NCC-g-PVCL. Cell culture results showed that the prepared nanofibers had better cytocompatibility and proliferation than neat CS nanofibers. The results proposed that the developed CS/NCC-g-PVCL nanocomposite nanofibers were promising as new biomaterials to be applied in the area of skin tissue engineering.
✓ 已验证
产品关联
DOI
高影响因子
IONICS
·
2019
·Vol. 25
·期 9
·4351-4360
·
IF 2.289
Yu Zhongliang,Zhang Jiahe,Xing Chunxian,Hu Lei,Wang Lili,Ding Ming,Zhang Haitao
Boron-nitrogen co-doped graphene nanoarchitectures were synthesized by annealing a freeze-dried precursor containing exfoliated graphene oxide (GO) nanosheets, ammonium borate, and polyvinyl alcohol (PVA). The microstructures and composition of nanocomposites were optimized and characterized systemically. Effects of a doping element on the electrochemical performances and interface compatibility were evaluated. The restacking of exfoliated graphene nanosheets was hindered effectively by the ultra-fine carbon clusters formed via the thermal decomposition of PVA. Such a three-dimensional structure favors the fast mobility of electrolyte ions. In addition, the co-doping of N and B elements not only increases interface compatibility between ionic liquid electrolyte and graphene but also supplies extra pseudocapacitance. Benefiting from the integrated merits, the optimized nanocomposites could deliver a specific capacitance of 35.4 F g −1 at 1 A g −1 and present a maximum energy density of 78.7 Wh kg −1 with a power density of 2043 W kg −1 . Due to the formation of more decoupled ions in ionic liquid electrolyte at elevated temperature, the symmetric supercapacitors based on the as-formed nanocomposite exhibit a maximum energy density of 134.6 Wh kg −1 at 60 °C.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY
·
2019
·
IF 3.571
Lei Xiang,Xiao-Dan Wang,Xiao-Hong Chen,Ce-Hui Mo,Yan-Wen Li,Hui Li,Quan-Ying Cai,Dong-Mei Zhou,Ming-Hung Wong,Qing X. Li
Di-n-butyl phthalate (DBP) is a prevalent pollutant in agricultural soils due to use of plastic film. This study focused on sorption mechanism, kinetics, and isotherms of DBP to six paddy soil particle-size fractions (i.e., coarse sand, fine sand, coarse silt, fine silt, clay, and humic acid fractions). DBP sorption involved in both boundary layer diffusion and intraparticle diffusion, following pseudo-second-order kinetics. DBP sorption was a spontaneous physical process, which fit the Freundlich model. Hydrophobic and ionic interaction relevant to the organic matter content, cation exchange capacity, surface area, and pore volume of soil fractions played key roles in DBP sorption. DBP was strongly adsorbed to humic acid and the sorption was reversely associated with soil particle sizes. DBP may exhibit higher mobility and bioavailability in a soil-crop system at lower temperature (15 °C), due to the lower log Koc values.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Catalysis Science & Technology
·
2019
·Vol. 9
·期 9
·2282-2290
·
IF 5.726
Dawei Zhou,Peixue Wang,Yan Long,Yuqing Fei,Youquan Deng
The thermal cracking behavior of diethyl hexamethylenedicarbamate (EHDC) was investigated in this work. The polymers formed under different conditions were analyzed by IR and TG, indicating that the polymers were mixtures of EHDC, polyureas, imines and others. The polymers could be converted to EHDC by a simple alcoholysis reaction for the first time over Fe–Ni/Al2O3 catalysts. Under the optimized reaction conditions, the yield of EHDC could reach up to 52% with 99% selectivity over 8% Fe–3% Ni/Al2O3 catalysts. The catalysts were extensively characterized by BET, XPS, XRD, SEM, TEM, H2-TPR and NH3-TPD, showing that the interaction effect between Fe species and Ni species may be attributed to high catalytic performance of the catalyst. Meanwhile, the loss of active components resulted in decreased catalytic activity.
✓ 已验证
产品关联
DOI
高影响因子
ANALYTICAL AND BIOANALYTICAL CHEMISTRY
·
2019
·Vol. 411
·期 8
·1647-1657
·
IF 3.286
Zuo Pengli,Liu Jianhua,Guo Hongna,Wang Chenghong,Liu Hongqian,Zhang Zhigang,Liu Qingyou
In this paper, we have presented a facile method to fabricate nitrogen and sulfur co-doped carbon dots (N,S-CDs) for blood methotrexate (MTX) sensing applications. The N,S-CDs with quantum yield up to 75% were obtained by one-step hydrothermal carbonization, using reduced glutathione and citric acid as the precursors. With this approach, the formation and the surface passivation of N,S-CDs were carried out simultaneously, resulting in intrinsic fluorescence emission. Owing to their pronounced temperature dependence of the fluorescence emission spectra, resultant N,S-CDs can work as versatile nanothermometry devices by taking advantage of the temperature sensitivity of their emission intensity. In addition, the obtained N,S-CDs facilitated high selectivity detection of Fe 3+ ions with a detection limit as low as 0.31 μM and a wide linear range from 3.33 to 99.90 μM. More importantly, the added MTX selectively led to the fluorescence quenching of the N,S-CDs. Such fluorescence responses were used for well quantifying MTX in the range of 2.93 to 117.40 μM, and the detection limit was down to 0.95 μM. Due to “inert” surface, the N,S-CDs well resisted the interferences from various biomolecules and exhibited excellent selectivity. The proposed sensing system was successfully used for the assay of MTX in human plasma. Due to simplicity, sensitivity, selectivity, and low cost, it exhibits great promise as a practical platform for MTX sensing in biological samples.
Graphical Abstract
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ChemElectroChem
·
2019
·Vol. 6
·期 14
·3764-3773
·
IF 3.975
Hui Liu,Hao Guo,Liguo Yue,Ning Wu,Qi Li,Wenqin Yao,Rui Xue,Mingyue Wang,Wu Yang
Graphical Turn the red light on : A series of NiS 2 /CoS 2 /NC- T composited is developed by carbonizing and sulfuring a binary precursor of Ni/Co-metal-organic framework. The composite NiS 2 /CoS 2 /NC-500 maintains the rod-like structure of the precursor and exhibits a high specific capacitance. An assembled asymmetric supercapacitor (ASC) NiS 2 /CoS 2 /NC-500//AC displays a high energy density and good cycle stability with high capacitance retention. A red LED can be illuminated by the assembled ASC. Transition metal sulfides derived from metal-organic frameworks (MOFs) have received increasing attention as a potential energy storage electrode material. Here, a series of NiS 2 /CoS 2 /NC- T ( T =temperature) have been successfully constructed by carbonizing and sulfuring the precursor of Ni/Co-MOF. It is worth emphasizing that N-doped carbon materials improve the conductivity of the electrode material. Moreover, NiS 2 /CoS 2 /NC-500 maintains the rod-like structure of the precursor and exhibits a high specific capacitance of 1325 F g −1 at a current density of 1 A g −1 . Apart from high capacitance, the NiS 2 /CoS 2 /NC-500 also demonstrated excellent cycling stability with retention rate of 75 % after 5000 cycles at a current density of 5 A g −1 . The good performance could be attributed to the unique rod-like structure and pore-size distribution of NiS 2 /CoS 2 /NC-500. Moreover, an assembled asymmetric supercapacitor NiS 2 /CoS 2 /NC-500//AC displays a high energy density of 53.93 Wh kg −1 at a power density of 800 W kg −1 and good cycle stability with capacitance retention of 85.71 % after 20,000 cycles at 5 A g −1 . In particular, a red LED can be illuminated by the assembled ASC, indicating that as-synthesized NiS 2 /CoS 2 /NC-500 hold great potential for practical applications.
✓ 已验证
产品关联
DOI
高影响因子
CARBON
·
2019
·
IF 7.466
Lulu Chen,Yelong Zhang,Xiangjian Liu,Ling Long,Siyu Wang,Xiaolong Xu,Minchao Liu,Wenxiu Yang,Jianbo Jia
The development of transition metal nitrides/carbon hybrids with well-organized morphology, outstanding efficiency and durability for Zn-air batteries are of great urgency. Herein, a morphology-controlled strategy to efficiently fabricate uniform Co 4 N nanoparticles anchored on N -doped carbon (Co 4 N@NC-m) is reported. The diameters and distribution of Co 4 N nanocrystals can be tuned to be homogeneous profited by abundant N sources in melamine. Moreover, thanks to the advantages of higher nitrogen doping content, better electrical conductivity , higher degree of graphitization , and larger electrochemical surface area, Co 4 N@NC-m possesses excellent oxygen reduction reaction (half-wave potential of 0.87 V) and oxygen evolution reaction (overpotential of 398 mV at 10 mA cm −2 ) activities in basic solution. The Zn-air battery fabricated with Co 4 N@NC-m owns higher open circuit voltage (1.490 V), larger power density, and better rechargeability than those of the commercial IrO 2 + 20% Pt/C catalysts, which proves the potential application in practical energy conversion devices.
✓ 已验证
产品关联
DOI
高影响因子
SCIENCE OF THE TOTAL ENVIRONMENT
·
2019
·
IF 5.589
Aijiao Zhou,Wangwei Chen,Lei Liao,Pengchao Xie,Tian C. Zhang,Xumeng Wu,Xiaonan Feng
The magnetic poly( N -isopropylacrylamide)/chitosan hydrogel with interpenetrating network (IPN) structure was designed based on the functional groups of targeted emerging contaminants , represented by hydrophilic sulfamethoxazole (SMZ) and hydrophobic bisphenol A (BPA). The average particle size, specific surface area, and total pore volume of the hydrogel were turned out to be 103.7 μm, 60.70 m 2 /g and 0.0672 cm 3 /g, respectively. Adsorption results indicated that the maximum adsorption capacity occurred at the pH where SMZ was anionic and BPA was uncharged. When the adsorption temperature increased from 25 °C to 35 °C, the amount of adsorbed SMZ hardly changed, but that of BPA increased by two times. The adsorption capacity of the binary system (i.e., with both SMZ and BPA) was almost the same as that of the single system, indicating that simultaneous adsorption of SMZ and BPA was achieved. The adsorption equilibrium was reached quickly (within 5 min) for both SMZ and BPA. For adsorption isotherm, the Freundlich model fitted well for SMZ at 25, 35 and 45 °C. However, the adsorption of BPA exhibited the sigmoidally shaped isotherm at 25 °C with the Slips model fitting well, and both the Freundlich isotherm and the Slips isotherm fitted the data well at 35 °C and 45 °C, suggesting that the adsorption force was initially weak but greatly enhanced with an increase in adsorbate concentration or ambient temperature. The main adsorption mechanism was inferred to be electrostatic interactions for SMZ, and hydrophobic interactions as well as hydrogen bonding for BPA. The hydrogel adsorbent maintained favorable adsorption capacity for BPA after five adsorption-desorption cycles. These findings may provide a strategy for designing high performance adsorbents that can remove both hydrophilic and hydrophobic organic contaminants in the aquatic environment.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CARBON
·
2019
·
IF 7.466
Chao Hu,Ye Mu,Silin Bai,Juan Yang,Lijun Gao,Shao-Dong Cheng,Shao-Bo Mi,Jieshan Qiu
Electrochemically converting CO 2 into fuels or high value-added chemicals hold a great promise for the utilization of emitted CO 2 in the future. Metal-nitrogen active sites (such as Fe–N, Co–N and Ni–N) are supposed to be effective for the electrochemical reduction of CO 2 to CO, whereas their catalytic activities are largely dependent on the dispersibility and bonding structures of the catalytically active metals. In this work, we develop atomically dispersed Fe, N-codoped sandwich-like porous carbon sheets using Fe-containing zeolitic imidazolate framework-8 and graphene oxide as precursors and polyvinyl pyrrolidone (PVP) as a mediator. Compared to catalysts without PVP or with another mediator (i.e. polyetherimide), the PVP-mediated carbon sheets show a porous morphology with a higher specific surface area and a more exposed number of Fe–N active sites. Benefiting from this favourable structure, the resultant Fe, N-codoped porous carbon sheets show higher current densities and improved faradaic efficiencies up to 98.6% at −0.62 V ( vs. the reversible hydrogen electrode, RHE) for the electrochemical reduction of CO 2 to CO. This PVP-mediated strategy could be applied to the fabrication of other metal/nitrogen codoped carbon materials for electrocatalysis.
✓ 已验证
产品关联
DOI
高影响因子
CARBOHYDRATE POLYMERS
·
2019
·
IF 6.044
Jing Zhang,Lingdong Chen,Biao Shen,Liqun Chen,Jie Feng
Hydrogels with good mechanical properties are promising for various applications. In this work, a simple yet effective method for preparing a novel double-network hydrogel was reported. First, nonfouling polymer, poly( N- (2-hydroxyethyl)acrylamide) (PHEAA), was crosslinked through covalent bonds. Antibacterial polysaccharide, chitosan (CS), was then crosslinked by chelation between the N- glucosamine units on the CS and citrate or sulfate ions. The poly( N- (2-hydroxyethyl)acrylamide)/chitosan double-network hydrogels (PHEAA/CS DN hydrogels) exhibited high tensile strength (3.8 MPa), strong elastic modulus (0.6 MPa). And the dynamic ionic crosslinking in CS network provided the DN gels with fast self-recovery ability as well as excellent fatigue resistance. Furthermore, the mechanical properties of the DN gels were enhanced after stretching and relaxing because of the molecular orientation and reconstruction of chitosan network. More importantly, the hydrogels have excellent antifouling and antibacterial properties, which is called “repelling and killing”, making them competitive candidates for applications in the biomedical field.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
APPLIED CATALYSIS A-GENERAL
·
2019
·
IF 4.63
Wei Qian,Lina Lin,Yunxiang Qiao,Xiuge Zhao,Zichen Xu,Honghui Gong,Difan Li,Manyu Chen,Rong Huang,Zhenshan Hou
The N-doped carbon layer coated SBA-15 support has been accomplished via a pyrolysis process . The ultra-low loading Ru nanoparticles ( ca. 0.1 wt.%) was incorporated into the support by impregnation and the sequential reduction. The images of HAADF-STEM revealed that the Ru particles with sub-1-nm size (0.2-0.7 nm) were uniformly dispersed on the support. The ultrafine Ru particles displayed the excellent activity for the hydrogenation of olefins , arenes, phenol derivatives and heteroarenes in aqueous phase. The aliphatic or alicyclic compounds were produced selectively without the hydrogenolysis of C O and C N bonds. The high turnover frequency (TOF) values can reach up to 10,000 h −1 . Notably, the activity of these catalysts improved dramatically with decreasing the sizes of Ru particles. Meanwhile, the N-doped carbon layer coating endowed the high stability of the Ru catalysts and prevented the leaching of the Ru species owning to the strong interaction between doped-N atoms and the ultrafine Ru particles. Overall, this work provides a highly attractive strategy to construct the supported sub-1-nm Ru particles utilized for the aqueous hydrogenation.
✓ 已验证
产品关联
DOI
高影响因子