文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第2917至2928个,产品总数6,840个

切换升序
CO2
Journal of CO2 Utilization · 2024 · IF 7.2

Amino acid flame-retardant finishing of poly-(ethylene terephthalate) (PET) fabrics based on supercritical CO2

Zhenrong Zheng,Junjie Dong,Jian Wang,Hongyang Wang

The majority of conventional flame retardants are made by chemical processes using petroleum resources, which cause serious pollution and waste of resources in the ecological environment. In this paper, flame retardants such as L-aspartic acid, DL-serine, L-tyrosine, L-lysine, L-phenylalanine, L-histidine, L-tryptophan, and glycine were employed to finish poly-(ethylene terephthalate) (PET) fabrics with supercritical CO 2 fluid. Scanning electron microscope (SEM) and Energy dispersive spectroscopy (EDS) were used to examine. the microstructure and chemical composition of flame-retardant PET fabrics. The limiting oxygen index (LOI) test and the vertical combustion test were used to assess the flame-retardant qualities of PET fabrics. Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were used to test and assess the thermal properties of PET fabrics. The strength test was used to assess the mechanical properties of PET fabrics. The results showed that the amino acid flame retardants were successfully finished on the PET fabrics by supercritical CO 2 (SC-CO 2 ) technology and improved the thermal stability of the PET fabric. In comparison to untreated PET fabric, the elongation at break was 13–15 % greater, and the breaking strength was not reduced. Among them, the PET fabrics treated with L-aspartic acid and L-lysine had better flame-retardant performance, there were no droplets, the LOI values were greater than 30 %, and the char length was less than 10 cm. After 45 minutes of soaping and 3 times of washing, the LOI values were still above 28 %, and there were no droplets. Therefore, the PET fibers treated with amino acids using SC-CO 2 technology effectively improved the flame-retardant performance of PET fabrics.

CAS / MDL: 63-91-2 302-84-1
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Journal of Energy Chemistry · 2024 · IF 14

Amplified internal electric field of Cs2CuBr4@WO3−x S-scheme heterojunction for efficient CO2 photoreduction

Zhijie Zhang,Xuesheng Wang,Junyi Qian,Jiayue Xu

Heterojunction construction, especially S-scheme heterojunction, represents an efficient universal strategy to achieve high-performance photocatalytic materials. For further performance stimulation of these well-designed heterojunctions, modulating the interfacial internal electric field (IEF) to steer dynamic charge transfer represents a promising approach. Herein, we realized the precise regulation of Fermi level ( E F ) of the oxidation semiconductor (mesoporous WO 3− x ) by tailoring the concentration of oxygen vacancies (V O ), maximizing the IEF intensity in Cs 2 CuBr 4 @WO 3− x (CCB@WO 3− x ) S-scheme heterojunction. The augmented IEF affords a robust driving force for directional electron delivery, leading to boosted charge separation. Hence, the developed CCB@WO 3− x S-scheme heterojunction demonstrated outstanding photocatalytic CO 2 reduction performance, with the electron consumption rate ( R electron ) up to 390.34 μmol g −1 h −1 , which is 3.28 folds higher than that of pure CCB. An in-depth analysis of the S-scheme electron transfer mode was presented via theoretical investigations, electron spin resonance (ESR), photo-irradiated Kelvin probe force microscopy (KPFM), and in-situ X-ray photoelectron spectroscopy (XPS). Finally, the CO 2 photoconversion route was explored in detail using in-situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) and DFT theoretical calculations.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Nature Communications · 2024 ·Vol. 15 ·期 1 ·1-12 · IF 14.7

An acid-tolerant metal-organic framework for industrial CO2 electrolysis using a proton exchange membrane

Yang Kang,Li Ming,Gao Tianqi,Xu Guoliang,Li Di,Zheng Yao,Li Qiang,Duan Jingjing

Industrial CO 2 electrolysis via electrochemical CO 2 reduction has achieved progress in alkaline solutions, while the same reaction in acidic solution remains challenging because of severe hydrogen evolution side reactions, acid corrosion, and low target product selectivity. Herein, an industrial acidic CO 2 electrolysis to pure HCOOH system is realized in a proton-exchange-membrane electrolyzer using an acid-tolerant Bi-based metal-organic framework guided by a Pourbaix diagram. Significantly, the Faradaic efficiency of HCOOH synthesis reaches 95.10% at a large current density of 400 mA/cm 2 with a high CO 2 single-pass conversion efficiency of 64.91%. Moreover, the proton-exchange-membrane device also achieves an industrial-level current density of 250 mA/cm 2 under a relatively low voltage of 3.5 V for up to 100 h with a Faradaic efficiency of 93.5% for HCOOH production, which corresponds to an energy consumption of 200.65 kWh/kmol, production rate of 12.1 mmol/m 2 /s, and an energy conversion efficiency of 38.2%. These results will greatly aid the contemporary research moving toward commercial implementation and success of CO 2 electrolysis technology.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
ACS Applied Materials & Interfaces · 2024 · IF 8.3

Amyloid-Like Protein-Modified Carbon Nitride as a Bioinspired Material for Enhanced Photocatalytic CO2 Reduction

Ting Niu,Yulu Mao,Yujing Lv,Mengjie Li,Yongchun Liu,Peng Yang,Quan Gu

Modification of g-C3N4 with metal-free biomaterials through an environmentally friendly, low-energy, facile, and rapid single-step method is desired for the preparation of photocatalysts with efficient activity and high selectivity of CO2 reduction but remains a great challenge. Herein, we develop a phase-transitioned protein modification strategy for photocatalysts through superfast amyloid-like protein assembly on surfaces using a one-step sequential coating method. Metal-free carbon nitride/protein heterojunction composite photocatalysts (the phase-transitioned lysozyme (PTL), phase-transitioned bovine serum albumin (PTB), and phase-transitioned ovalbumin (PTO)-coated carbon nitride@SiO2 (CN@SiO2) and bioinspired carbon nitride hollow nanospheres (CN-HS) obtained by etching of CN@SiO2) are prepared using lysozyme, bovine serum albumin, and ovalbumin. The insulator–semiconductor heterojunctions formed at the protein–carbon nitride interface promote the migration and separation of photogenerated charges. The exposed hydrophobic alkyl and aryl groups of the surface-modified protein enable the formation of a CO2–aqueous solution–photocatalyst three-phase interface on the catalyst surface and the exposed −NH2 groups provide sites for CO2 adsorption, which effectively increases CO2 mass transfer and its adsorption as well as hydrophobicity, promoting CO2 reduction and inhibiting hydrogen production. Therefore, protein modification effectively improves the CO2 reduction activity and CO selectivity. For instance, compared to CN-HS, the CO yield of the PTL-modified CN-HS (1346.5 μmol g–1) increased by 24.5 times and the CO selectivity reached 90.5%. These findings represent a critical advancement in the surface modification of carbon nitride for CO2 reduction and the design of bioinspired materials for various applications.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
FUEL · 2024 · IF 6.7

A facile synthesis of trioctylphosphine oxide-based azole deep eutectic solvents: Efficient reversible CO2 capture

Yurou Shao,Yangyang Jiang,Dong Wang,Benshuai Guo,Jingyan Zhao,Zhibin Zhou,Jianqiu Chen,Ruixin Guo,Yuntao Lei,Lili Jin

Capturing and recovering carbon dioxide (CO 2 ) from the combustion of fossil fuels is an effective way to reduce carbon emissions, as CO 2 is not only a threat to the environment but also an important C1 feedstock. In the current work, a series of trioctylphosphine oxide (TOPO)-based azole deep eutectic solvents (DESs) have been synthesized for the efficient absorption of CO 2 . The solid–liquid phase diagrams of the DESs were projected using the prediction data from COSMO-RS, and the experimental melting temperature was found to be lower than that of the prediction. These DESs exhibit satisfactory physical properties, including low viscosities (20–60 mPa·s) and high thermal decomposition temperatures (up to 192.5 °C). Furthermore, the CO 2 uptake process was carried out at 35 °C and 0.1 MPa, and the results demonstrated that the CO 2 uptake capacity was positively influenced by hydrogen bond donors (HBDs), mole fraction of HBDs, temperatures, and humidity. Among the DESs, TOPO-imidazole (1:1) was notable for its high absorption capacity of 0.062 mol CO 2 /mol DES, as well as its excellent recyclability. There was no discernible decline in the CO 2 uptake capacity after four absorption–desorption cycles. In this work, NMR and FT-IR investigations indicated the physical absorption mechanism of this system. The designed DESs have the potential to be effective absorbents for efficient reversible CO 2 capture.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
APPLIED CATALYSIS B-ENVIRONMENTAL · 2024 · IF 20.2

Cation rearrangement at tetrahedral sites in the Cu/ZnAl2O4 spinel enhancing CO2 hydrogenation to methanol

Lixin Song,Guobin Liu,Zhenping Qu

Cu/ZnAl 2 O 4 spinel is a promising catalyst for CO 2 -to-methanol due to its dual-site H 2 activation. However, controlling surface properties and metal-support interactions (MSI) through the coordination environment of spinel cations remains underexplored. Herein, the occupancy of Zn 2+ and Al 3+ cations in Cu/ZnAl 2 O 4 spinel is fine-tuned by manipulating the calcination atmosphere. More disordered structures (AlO 4 and ZnO 6 ) observed on the CZA-Ar catalyst benefit the creation of oxygen vacancies and surface hydroxyl groups, which facilitate the formation of highly dispersed small-sized Cu species. This enhances MSI and hydrogen spillover effects, thereby boosting CO 2 conversion and the space-time yield (STY) of methanol. High-pressure in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) results reveal that the crucial formate intermediates form at tetrahedral sites in ZnAl 2 O 4 spinel, with more Al-HCOO - species observed on the CZA-Ar catalyst due to the formation of AlO 4 . This work advances the understanding of spinel catalysts in CO 2 hydrogenation to methanol.

CAS / MDL: 7784-27-2
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH · 2025 · IF 3.9

Mixed Matrix Membranes with Ionic Liquid-Grafted Layered Double Hydroxides: Characterizations and CO2 Separation Properties

Wei Zheng,Haiyan Jiang,Chaoran Wang,Shaojuan Zeng,Xiaochun Zhang,Haifeng Dong,Lu Bai,Xiangping Zhang

Carbon dioxide (CO2) separation plays a vital role in environmental protection and resource reuse. A potential approach to achieving satisfactory CO2 separation is combining the benefits of ionic liquids (ILs) and membranes. In this work, the IL-LDH nanosheets were obtained by functionalized IL modifying layered double hydroxides (LDH) and used to construct the Pebax/IL-LDH mixed matrix membranes (MMMs). The X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, and X-ray photoelectron spectroscopy (XPS) spectra analysis displayed that the IL was successfully grafted to the LDH nanosheets. The characterizations of MMMs showed that the introduction of IL-LDH reduces the crystallinity of the Pebax membrane, and there are hydrogen bond interactions between fillers and Pebax. The IL modification strengthens the membranes with better CO2 affinity and improves the interfacial compatibility between Pebax and LDH. Meanwhile, the CO2-philic nanochannels formed by the slits of IL-LDH nanosheets facilitate CO2 transport in MMMs. Such inherent properties of the IL and LDH conjunctly contribute to the improvement of the CO2 separation performance of membranes. The optimum Pebax/IL(20)-LDH MMM has a high CO2 permeability of ∼388 barrer at 30 °C, which is approximately 2.9 times that of pure Pebax, and the CO2/CH4 selectivity does not change significantly. Besides, the Pebax/IL(20)-LDH MMM exhibited a notable increase in CO2 permeability as the working temperature increased, ultimately attaining ∼576 barrer at 50 °C.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
SEPARATION AND PURIFICATION TECHNOLOGY · 2024 · IF 8.1

NaCl template synthesis of N-doped porous carbon from magnesium gluconate for efficient CO2 adsorption

Jinsong Shi,Jianguo Xu,Hongmin Cui,Nanfu Yan,Runhan Yan,Yaqing Weng

Porous carbon is a very promising type of CO 2 adsorbent due to its excellent stability, low cost, and tunable physicochemical properties. In the current work, N-doped hierarchically porous carbon was synthesized with the assistance of NaCl template and KHCO 3 activation. A series of carbons with three dimensional and interconnected micro- meso -macroporous structure were successfully prepared. Effects of synthesis conditions on textural properties and N-doping were analyzed and discussed with details. The carbons also exhibited high surface area (725–2423 m 2 /g) and N content (1.49–7.93 wt%). CO 2 adsorption properties were studied with a combined experimental and theoretical approach. At 25 °C and 1 bar, the carbons exhibited CO 2 uptake up to 4.22 mmol/g and CO 2 /N 2 selectivity up to 25.6. Grand canonical Monte Carlo (GCMC) simulation was employed to further elucidate the different roles played by N-doping and textural properties during CO 2 adsorption. Effects of various N-functionalities located in pores with different sizes on CO 2 adsorption were thus revealed. The present study presents a novel strategy for controlled synthesis of porous carbons, and provides helpful insights into their CO 2 adsorption behaviors.

CAS / MDL: 3632-91-5
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2022 · IF 16.744

Upscaling studies for efficiently electric-driven CO2 reduction to CO in ionic liquid-based electrolytes

Lei Yuan,Leihao Zhang,Jianpeng Feng,Chongyang Jiang,Jiaqi Feng,Chunshan Li,Shaojuan Zeng,Xiangping Zhang

Electric-driven CO 2 reduction to high value-added chemicals is a potential way to solve the carbon emissions. However, the current studies on CO 2 electroreduction (CO 2 ER) are mainly focused on design and preparation of novel electrocatalysts and electrolytes. The large-scale of CO 2 ER is puzzled in the serious hydrogen evolution reaction (HER) in aqueous electrolytes and inferior reaction stability in an enlarged CO 2 electrolyzer. Ionic liquids (ILs) as electrolytes have opened great opportunities for CO 2 ER due to their unique advantages. Herein, a large-scale CO 2 ER device containing an upscaling modified H-type flow cell using IL-based electrolytes (UHFC-IL) with the largest electrode active area of 495 cm 2 was established for CO 2 ER studies. The influences of key operating parameters, such as compositions of IL-based electrolytes, electrolytes velocity, CO 2 gas flow rate and cell voltage on CO 2 ER performance were systematically investigated. A high CO 2 ER performance under the optimum operating conditions achieves 83.9% Faraday Efficiency (FE) for CO with a reaction current of 6.32 A, suppressing HER to only 2% FE. After 10 hr continuous operation, the CO selectivity in IL-based electrolytes is 51.3% higher than that in 0.1 M KHCO 3 aqueous electrolytes, which maintains excellent stability with a high CO generation rate of 1.7 L hr -1 . In addition, the mechanism of CO 2 ER to CO boosted by IL-based electrolytes in UHFC-IL was proposed. This study provides experimental parameters and guidance for future research on the amplification process of CO 2 ER.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2022 · IF 16.744

Nonmetallic surface plasmon resonance coupling with pyroelectric effect for enhanced near-infrared-driven CO2 reduction

Changhai Lu,Xinru Li,Juan Li,Liang Mao,Mingshan Zhu,Qin Chen,Long Wen,Baojun Li,Tuan Guo,Zaizhu Lou

Plasmonic semiconductors with both features of metals and semiconductors are expected materials for solar light harvesting. Here, plasmonic semiconductor heterostructures were constructed by coupling pyroelectric black phosphorus (BP) and plasmonic tungsten oxides (WO) as photocatalyst for CO 2 reduction. Intriguingly, under visible and near-infrared (NIR) light irradiation, the plasmonic BP/WO heterostructures with optimal composition exhibit high-selective 26.1 μmol g -1 h −1 CO generation (98 %), which is 7- and 17-fold higher than those of plasmonic WO and pyroelectric BP, respectively. The interface bonds (P-O-W) were detected by FTIR spectra and demonstrated by density functional theory (DFT) calculations as dominant channels for electron transfer from BP to WO. Plasmonic thermal effect of WO can increase the local temperature to 86 °C under visible and NIR light irradiation, triggering pyroelectric effect of BP and generating pyroelectric carriers, which enhance the electron transfer from BP to WO. Therefore, continuous electron injection from pyroelectric BP to WO enhances surface plasmon resonance for high-selective CO 2 reduction. This work provides clear proofs to demonstrate that constructing pyroelectric effect on plasmonic heterostructures is one useful strategy to promote NIR-harvesting for artificial photosynthesis.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
SEPARATION AND PURIFICATION TECHNOLOGY · 2025 · IF 9

Organic solvents induced enhancement of phase-splitting behaviors and CO2 absorption performance in biphasic absorbent

Yang Yang,Shaona Wang,Kanghuai Yang,Wenqing Xu,Xueqian Wang,Zanbu Geng,Guoping Liao,Ping Ning,Tingyu Zhu

Reducing the rich phase ratio is a key issue for developing the biphasic absorbents. In this study, it is found that the hydrophobic solvents (sulfolane and N, N-dimethylformamide) are beneficial for reducing rich phase volume, while hydrophilic solvents (n-propanol, Polyethylene glycol) inhibit the phase splitting. Sulfolane is the optimal solvent, wherein, the rich phase ratio is greatly reduced from 79 % to 37 %. The CO 2 absorption capacity in the rich phase increases from 2.50 M to 4.25 M. The kinetic studies show that the total mass transfer coefficient is increased by 1.96 times with sulfolane addition. The regeneration energy consumption of the developed absorbent is only 1.85 GJ/t-CO 2 , which is 53.6 % less than MEA. The results can provide a theoretical reference for developing high-performing biphasic absorbents.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF COLLOID AND INTERFACE SCIENCE · 2024 · IF 9.4

Pd-induced polarized Cu0-Cu+ sites for electrocatalytic CO2-to-C2+ conversion in acidic medium

Bowen Wang,Lu Song,Chen Peng,Ximeng Lv,Gengfeng Zheng

The acidic CO 2 reduction reaction (CO 2 RR) offers a promising approach to mitigate CO 2 reactant loss and carbonate deposition, which are challenging issues in alkaline or neutral electrolytes. However, the hydrogen evolution reaction (HER) competes in the proton-rich environment near the catalyst surface as a side reaction, reducing the energy efficiency of generating multi-carbon (C 2+ ) products. In this work, we proposed a palladium (Pd) doping strategy in a copper (Cu)-based catalyst to stabilize polarized Cu 0 -Cu + sites, thus enhancing the C C coupling step during the CO 2 RR while suppressing HER. At an optimal doping ratio of 6%, the Pd dopants were well dispersed as single atoms without aggregation, allowing for the stabilization of subsurface oxygen (O Sub ), preserving the polarized Cu 0 -Cu + active sites, and reducing the energy barrier of C C coupling. The Pd-doped Cu/Cu 2 O catalyst exhibited a peak Faradaic efficiency (FE) of 64.0% for C 2+ products with a corresponding C 2+ partial current density of 407.1 mA∙cm −2 at −2.18 V versus a reversible hydrogen electrode, a high CO 2 single-pass conversion efficiency (SPCE) of 73.2%, as well as a high electrochemical stability of ∼ 150 h at industrially relevant current densities, thus suggesting a potential approach for tuning the electrocatalytic CO 2 performances in acidic environments with higher carbon conversion efficiencies.

CAS / MDL: 3375-31-3
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。