文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第2917至2928个,产品总数3,922个

切换升序
Mxene
POLYMER · 2026 · IF 5.1

Directional freeze wet-spun polyimide aerogel fabric loaded with MXene/Liquid metal coating for infrared stealth and motion sense

Yingtao Li,Tao Zhang,Jingxing Gui,Feiyue Zhou,Lixuan Yang,Yuxuan Ma,Baojiang Liu,Dan Yu,Wei Wang

Composite aerogel fabric with integrated infrared stealth and strain-sensing functionalities was fabricated by a highly porous Polyimide (PI) aerogel substrate via directional freeze-assisted wet spinning combined with an ice-templating method. After interfacial modification with polydopamine on the weaved aerogel fabric, MXene and gallium-indium-tin liquid metal (LM) were ultrasonically emulsified and then loaded on the aerogel fabric under ice-water bath conditions. Characterization results show that the porous PI substrate exhibits a low thermal conductivity of 0.03546 W m −1  K −1 , and the composite fabric achieves an infrared emissivity as low as 0.298. Leveraging the synergistic effect of thermal insulation from the substrate and low radiation from the conductive layer, the fabric enables stable infrared camouflage in the temperature range of 50-100 °C. COMSOL simulation of heat transfer in PIMLM fabric confirms the passive cooling effect effectively lowers the thermodynamic temperature of the fabric surface, providing crucial support for its wide-temperature-range infrared stealth capability. In sensing tests, the sample demonstrates a response time of 122 ms and a recovery time of 328 ms, along with excellent signal reproducibility under multilevel strain and various tensile rates, enabling real-time monitoring of human limb movements. This fabrication approach provides a feasible strategy for the development of multifunctional wearable stealth sensing fabrics.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH · 2026 ·Vol. 65 ·期 28 ·14730-14745 · IF 3.9

Amino-Functionalized MOF-Derived MXene Decorated with 3D Aerogel Network for Efficient Capture Capability and Separation of Mercury(II)

Pang Jialin,Li Hao,Dong Yuting,Zhu Yao,Xu Jicheng,Yuan Ziyu,Dai Yuting,Zhang Tao,Yang Dongya,Qiu Fengxian

Mercury pollution poses a substantial threat to human health and the ecological environment, with the predominant source being the discharge of Hg 2+ from industrial wastewater. Adsorption is considered one of the most promising technologies for the removal of Hg 2+ from wastewater. In this work, a millimeter-scale bead-type composite adsorbent, denoted as MIL-101-NH 2 @MXene/SA-Ca 2+ -PAA (MNM-ACP) beads, was fabricated through the in situ synthesis of amino-functionalized MIL-101 on MXene, followed by its incorporation into the ACP 3D aerogel network. The maximum Hg 2+ adsorption capacity reached 288.8 mg g –1 at an initial Hg 2+ concentration of 300 mg L –1 under the conditions of pH 5 and 45 ° C. Combining kinetic and isotherm model fitting with characterization analyses revealed that the primary mechanisms for Hg 2+ adsorption onto MNM-ACP beads involve coordination, surface complexation, electrostatic interaction, and ion exchange. Thermodynamic analysis revealed positive ΔH and negative ΔG values, indicating that the adsorption process was spontaneous and endothermic. In addition, the MNM-ACP beads exhibited high selectivity, excellent resistance to ionic interference, and maintained over 75% of their initial adsorption capacity after five adsorption–desorption cycles. The dynamic adsorption behavior in the fixed-bed column was well described by the Yoon-Nelson model. This strategy achieves efficient Hg 2+ removal while addressing the practical issues of inconvenient handling and difficult recovery associated with conventional powdered adsorbents.

CAS / MDL: 10022-68-1 7664-39-3
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF COLLOID AND INTERFACE SCIENCE · 2026 · IF 9.6

Conquering the spatial-electronic dichotomy of MXene catalysts via surface-amorphized Mott-Schottky junctions for advanced lithium-sulfur batteries

Shuocheng Qiu,Haoxuan Sun,Xiuquan Zhang,Wei Kang,Ali Noman,Yan Ding,Meixia Su,Yu Zhao,Xin Chen,Ruotong Wu,Idrees Rehman,Sida Deng,Hanlin Yi,Erqing Xie,Kun Tao,Zhenxing Zhang

Lithium‑sulfur batteries (LSBs) suffer from the “shuttle effect” and slow redox kinetics. Although MXenes serve as competitive catalytic platforms owing to their metallic conductivity, their pristine crystalline surfaces suffer from a severe spatial-electronic dichotomy. Geometrically, rigid lattice symmetries restrict the exposed catalytic active centers exclusively to edge sites, leaving the vast basal planes catalytically dormant. Electronically, the dense coverage of highly electronegative terminal groups establishes a localized negative surface potential, inducing severe electrostatic repulsion against electron-rich polar polysulfide anions. To conquer this constraint, we present a surface engineering paradigm to construct a surface-amorphized Mo 2 CT x /a-MoO x Mott-Schottky heterojunction via an in-situ oxidative strategy. This architecture triggers interfacial electronic reconfiguration, driving spontaneous electron migration from the semiconducting a-MoO x overlayer into the metallic Mo 2 CT x core to achieve thermodynamic Fermi level equilibration. The resulting built-in electric field establishes a localized electron-deficient capture layer on the surface, successfully neutralizing the native electronegative electrostatic repulsion barrier of the MXene framework. Synchronously, the amorphous a-MoO x shell disrupts crystalline steric hindrances, awakening a massive density of unsaturated Mo 5+ defect states that initiate a Mo S and Li O dual-anchoring chemisorption mode. Benefiting from this spatial-electronic liberation, the modified separator lowers the thermodynamic activation barriers for bidirectional sulfur conversion. Li S cells integrated with the Mo 2 CT x /a-MoO x -modified separator deliver a high initial specific capacity of 1309.4 mAh g −1 at 0.2C, high-rate capability up to 4C (597.2 mAh g −1 ), and robust cycling stability under a sulfur loading of 6.43 mg cm −2 (747.3 mAh g −1 maintained after 70 cycles). This work establishes a fundamental paradigm for leveraging localized surface amorphization and Mott-Schottky charge dynamics to manipulate surface potentials and conquer interfacial repulsion in advanced energy storage applications. Download: Download high-res image (340KB) Download: Download full-size image The surface-amorphized Mo 2 CT x /a-MoO x Mott-Schottky heterojunction triggers spontaneous interfacial electron migration, establishing a robust built-in electric field. This electronic reconfiguration awakens abundant coordinatively unsaturated Mo 5+ defect states, neutralizing native electrostatic repulsion to anchor lithium polysulfides and accelerate their bidirectional conversion. The synergistic effects of spatial defect exposure and surface potential modulation significantly boost the electrochemical kinetics of Li-S batteries.

CAS / MDL: 7647-01-0 7722-84-1
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
MICROCHEMICAL JOURNAL · 2026 · IF 5.2

Engineering a three-dimensional ion–Electron co-transport Interface on MXene for multiplex electrochemical determination of heavy metal ions

Jiahui Liu,Xiaorui He,Yue Wang

One-step MXene/CNTs-COOH/CS/IL sensing interface was constructed. • CNTs-COOH alleviated MXene restacking and promoted electron transport. • CS and ionic liquid enhanced metal-ion enrichment and ionic transport. • The sensor simultaneously determined Cd 2+ , Pb 2+ , Cu 2+ , and Hg 2+ . • Real-water results agreed well with ICP-MS measurements. Rationally coordinating ion accessibility, electron transport, metal-ion enrichment, and film stability within a facile electrode architecture remains challenging for multiplex electrochemical analysis. Herein, an MXene-based multicomponent sensing interface was constructed through the one-step integration of carboxylated carbon nanotubes (CNTs-COOH), chitosan (CS), and an ionic liquid (IL) with Ti 3 C 2 T x nanosheets. CNTs-COOH act as conductive nano-spacers that alleviate MXene restacking and improve electronic connectivity, while CS provides coordination-active amino and hydroxyl groups for metal-ion enrichment and contributes to film stability. The incorporation of IL improves component dispersion and ionic transport and partially mitigates the interfacial transport limitation associated with the CS-containing layer. Structural and electrochemical characterization results collectively support complementary roles of the four components in regulating interfacial accessibility, analyte accumulation, and charge-transfer behavior. Under the optimized conditions, the resulting electrode enabled the simultaneous determination of Cd 2+ , Pb 2+ , Cu 2+ , and Hg 2+ by differential pulse anodic stripping voltammetry over linear ranges of 0.5–22.5, 0.5–60, 0.5–87, and 0.5–62 μM, respectively. The corresponding detection limits were 0.1539, 0.0746, 0.2279, and 0.0931 μM. The sensor also exhibited satisfactory selectivity, reproducibility, and long-term stability, retaining approximately 92–95% of its initial response after 30 days. Recoveries of 92.2–96.0% were obtained in spiked tap-water and river-water samples, and the measured concentrations were consistent with those obtained by ICP-MS. These results demonstrate a functionally coordinated interface-engineering strategy for the simultaneous electrochemical determination of multiple heavy metal ions. Download: Download high-res image (139KB) Download: Download full-size image

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ACS Applied Materials & Interfaces · 2026 · IF 7.8

In-Situ CuNPs Reduction on MXene for High-Thermal-Conductivity Composite Films with Exceptional EMI Shielding and Photothermal Conversion

Xianjin Yang,Enxiang Jiao,Xuehai Zhang,Ke Zhang,Anbang Sun,Yanwei Zhao,Huimin Wang,Zheng Cao,Peng Lv,Haijun Zhang,Hongwang Shen,Fulai Zhao

The rapid advancement of 5G communication technology necessitates enhanced performance in electromagnetic interference (EMI) shielding and thermal management materials. We fabricated multifunctional nacre-like MXene@CuNPs(MSC)composite films via intermittent filtration and in situ reduction. The resulting composite film exhibited a high in-plane thermal conductivity of 47.6 W m–1 K–1 and demonstrated superior thermal management capability in heat dissipation tests. Containing 3.1 wt % Cu and with a thickness of 0.04 mm, the film achieved an average EMI shielding effectiveness (SE) of 64 dB within the X-band (8.2–12.4 GHz). Calculations based on the effective medium theory (EMT) elucidated the critical role of Cu nanoparticles (CuNPs) in establishing an efficient thermal conduction network. Owing to the CuNPs acting as thermal bridges, the interfacial thermal resistance within the composite film decreased by 35.6%. Furthermore, the MSC composite films exhibited rapid-response photothermal behavior. Upon irradiation with a light power density of 200 mW cm–2, the surface temperature of the MSC3.1 film rapidly reached 101 °C. The outstanding performance of this composite film underscores the broad application potential of Cu-modified MXene in electronic devices and related fields.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS · 2026 · IF 5.4

Multi-scale porous bacterial cellulose/MXene/Fe3O4 aerogels via click chemistry for Ku-band electromagnetic absorption and thermal insulation

Xueyue Lyu,Qiu Zhang,Liying Pan,Chenyang Zhang,Xinrui Wang,Jiawei Qi,Guangdong Zhao,Dongyu Zhao

With a rapid advancement of electronic information technology, electromagnetic waves have facilitated information transmission, however, they have also increasingly caused severe electromagnetic interference affecting a normal operation of electronic devices. Consequently, the development of materials exhibiting high-efficiency electromagnetic wave absorption properties to mitigate electromagnetic pollution holds substantial scientific and practical significance. In this study, click chemistry was innovatively employed in the interfacial bonding of composite aerogels. Conductive MXene nanosheets were embedded within the three-dimensional network framework of bacterial cellulose (BC), and then the Fe 3 O 4 nanoparticles were attached to the surface of the substrate through a thiol-ene click chemical reaction, successfully constructing a BC/MXene/Fe 3 O 4 (BMF) composite aerogels with a multi-scale porous structure. The aerogel demonstrates a dual-loss mechanism, combining electrical loss and magnetic losses synergistically, thereby effectively addressing the issue of impedance mismatch. Additionally, its hierarchical pore structure significantly enhances multiple reflections and scattering of electromagnetic waves within the material, extending the propagation path and consequently improving energy dissipation capacity. The results show that the BMF composite aerogels exhibits excellent electromagnetic wave absorption properties. Its minimum reflection loss is −52.80 dB, the maximum effective absorption bandwidth is 5.98 GHz (11.91–17.89 GHz), and the absorption efficiency is 99.999 %, capable of covering most of the Ku band (2–18 GHz). Furthermore, the aerogel possesses lightweight characteristics (density of 0.0150 g/cm 3 ) and favorable thermal insulation properties (thermal conductivity of 0.0293 W·m −1 ·K −1 ). The development of BMF composite aerogels offers a novel approach for electromagnetic shielding materials applicable to the protection of precision electronic equipment and the defense industry applications.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
FOOD CHEMISTRY · 2026 · IF 10.4

High performance portable sensor based on excellent conductive composite MXene@Ag-MEL for detection of gallic acid in foods

Xingxing Zeng,Dongnan Zhang,Simin Chen,Xiaozi Huang,Zhenxia Zhao,Xin Li,Baoyu Liu

Rapid and accurate detection of bioactive phenolic compounds in food is crucial for assessing nutritional value and ensuring quality. Gallic acid (GA) is a naturally occurring polyphenolic compound found in plant-based foods such as grapes, mangoes, and tea leaves. It possesses significant antioxidants, antibacterial, and anticancer properties, making it a key target in research on food nutrition and functional components. However, many sensors are limited by slow surface dynamics, so the development of advanced sensing materials is a great challenge. In this study, a high specific surface area MEL zeolite (MEL) is prepared (471.24 m 2  g −1 ) and complexed with highly conductive Ag species and two-dimensional MXene nanosheets (MXene) to construct a novel screen-printed sensing platform (MXene/Ag/MEL/chitosan (CS)/screen-printed electrode (SPE). The novel sensor notably possessed excellent GA detection performance, exhibiting an extremely low limit of detection (LOD = 0.5 μM) and a wide detection range (1 μM-50 mM). Further, a portable GA sensing system is prepared by integrating the above screen-printed platform with miniaturized circuits, which showed similar analytical results to the standard high-performance liquid chromatography (HPLC) method (the recovery rate ranges from 95.75% to 97.93%). This work not only presents advanced sensing material but also provides a practical and convenient platform for rapid food analysis and dietary assessment.

CAS / MDL: 7789-24-4 78-10-4
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
Polymers · 2026 ·Vol. 18 ·期 3 ·378 · IF 4.9

NIR-II Responsive Platinum-Engineered Vanadium Carbide MXene Endows Poly-L-Lactic Acid Bone Scaffold with Photothermal Antibacterial Property

Lin Sun,Zihao Zhang,Bingxin Sun,Zhiheng Yu,Guoyong Wang

Vanadium carbide (V 2 C) MXene shows great potential for addressing challenging implant-associated infections in bone regeneration due to its strong photothermal conversion efficiency. However, its photothermal efficacy is restricted to the near-infrared I (NIR-I) region due to a limited absorption range. To address this, we designed platinum nanoparticle-decorated V 2 C heterostructures (Pt@V 2 C) via an in situ growth method, leveraging Pt’s plasmonic and catalytic properties to extend the photoresponse to the NIR-II window. Subsequently, Pt@V 2 C was integrated into poly-L-lactic acid (PLLA) to fabricate PLLA-Pt@V 2 C scaffolds with photothermal antibacterial function by selective laser sintering. The optimized PLLA-Pt@V 2 C scaffold achieves a record photothermal conversion efficiency (56.03% at 1064 nm), triggering simultaneous hyperthermia (>52 °C) and catalytic ·OH radical generation. In vitro studies demonstrate exceptional antibacterial efficacy against Staphylococcus aureus and Escherichia coli, achieving over 99% killing rates upon 1064 nm near-infrared irradiation. Furthermore, the scaffold demonstrated significant inhibition of biofilm formation, achieving over 90% reduction in biofilm biomass. Moreover, the scaffold demonstrated high cell viability, confirming its dual functionality of potent bactericidal activity and biocompatibility that supports tissue regeneration. This work provides a feasible strategy for combating implant-associated infections.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
LANGMUIR · 2026 · IF 4.4

Fabrication of N, P, F Co-Doped MXene Nanosheets with Ionic Liquid-Assisted Carbonization as an Efficient Lubricant Additive

Tingyu Li,Yixin Wang,Li Hao,Yiping Sun,Shujuan Liu,Qian Ye,Feng Zhou

Herein, nitrogen, phosphorus, and fluorine codoped MXene (N,P,F-MXene) was synthesized via thermal treatment using 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF6]) as the doping precursor. Comprehensive characterization confirmed the effective incorporation of nitrogen, phosphorus, and fluorine into the MXene lattice. Tribological testing revealed that N,P,F-MXene demonstrated excellent performance as an additive in lubrication, showing significantly reduced friction and wear. Specifically, it achieved an average COF of 0.109 and reduced wear volume by 62.5% versus the base oil. Furthermore, the N,P,F-MXene-based lubricant exhibited good adaptability under extreme operating conditions, sustaining stable tribological behavior over a broad load, frequency, and temperature range. Notably, its load capacity reached 500 N. Mechanistic analysis indicates that its superior performance originates from the synergistic effects of the physical filling and adsorption of N,P,F-MXene, coupled with the formation of a tribo-chemical film with low shear strength enriched with nitrogen/phosphorus/fluorine compounds and metal oxides in the friction process. This study provides an effective strategy for heteroatom doping of MXene and offers a promising pathway toward high-performance oil-based lubricant additives.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Journal of Energy Storage · 2026 · IF 10.7

Targeted adsorption of MXene quantum dots enables preferential growth of Zn (002) plane for stable and reversible zinc anode

Zhuoyan Liu,Libing Hu,Haomiao Yang,Zhixin Li,Haolin Jiang,Ning Du,Beibei Sun,Jianhui Jiang,Jisheng Zhou,Jianbo Zhao

Detrimental side reactions and irregular zinc dendrite growth restrict the development of aqueous zinc ion batteries (AZIBs). Although the deposition dominated by Zn (002) crystal plane is proved to mitigate the issues of side reaction and zinc dendrites, inducing the oriented deposition of Zn (002) plane faces thermodynamic challenges. Herein, we use MXene quantum dots (F-MQDs) as an electrolyte additive, which orientedly adsorb on the Zn (002) crystal plane, as a target to guide the preferential deposition of zinc ions. Benefit from the abundant fluorine (F) on the surface, F-MQDs shows a higher absorption energy on the Zn (002) plane than other planes. The installed F-MQDs further preferentially adsorb Zn ions and thus guides the Zn (002)-oriented deposition. As the exposed Zn (002) is the plane that has the lowest surface energy, the suppression of HER, prohibition of zinc corrosion and the elimination of zinc dendrite are achieved synchronously. As a result, the symmetrical Zn||Zn cell shows a prolonged lifespan up to 650 h at the current density and deposition capacity of 1 mA cm −2 and 1 mA h cm −2 . Asymmetric Zn||Cu cell also yield a high average coulombic efficiency of 99.67%. Zn||V 2 O 5 full cells also demonstrate a augmented cycling performance with the highest specific capacity of 133.1 mAh g −1 at 5 A g −1 . This work provides an insight in targeted deposition for achieving high-performance AZIBs.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Journal of Cleaner Production · 2026 · IF 10.7

Fluorine-free and sustainable synthesis of Ti3C2Tx MXene via chelation-assisted alkaline etching for environmental sensing and photothermal applications

Chong Li,Chunjie Wu,Yufei Xiao,Siqi Zhu,Yuhan Li,Kunyi Tong,Chenhao Zhang,Hui Li

Two-dimensional MXene nanosheets have attracted extensive attention due to their exceptional physicochemical properties. However, the conventional synthesis of MXenes relies heavily on hazardous fluoride-based etchants, causing severe environmental and safety risks. Herein, we report a clean, fluorine-free, and sustainable strategy for synthesizing oxygen-terminated Ti 3 C 2 T x MXene (Ff-Ti 3 C 2 T x ) via a novel chelation-assisted alkaline etching approach. By synergistically combining tetramethylammonium hydroxide with ethylenediaminetetraacetic acid, we successfully overcome the intrinsic aluminum-passivation bottleneck that severely restricts the etching efficiency of conventional pure alkaline systems. This dual-agent chelation system not only enables the controlled and efficient delamination of Ti 3 AlC 2 into monolayer Ti 3 C 2 T x nanosheets under extremely mild conditions but also delivers a record-high yield of 40%, representing a 60% improvement over existing fluorine-free methods. The resulting Ff-Ti 3 C 2 T x exhibits a highly hydrophilic, oxygen-rich surface (–OH, –O), which inherently enhances its electrochemical activity and light-harvesting performance. As an environmental sensor, it achieves ultrasensitive detection of p -nitrophenol with a low detection limit of 0.055 μM and a high sensitivity of 3.16 μA μM −1 cm −2 . Moreover, Ff-Ti 3 C 2 T x demonstrates exceptional near-infrared photothermal performance, with a mass extinction coefficient of 21.8 L g −1 cm −1 at 808 nm and a photothermal conversion efficiency of 42.1%. This work provides a scalable, environmentally benign, and high-yielding pathway for fluorine-free production of MXene and establishes Ff-Ti 3 C 2 T x as a versatile platform for next-generation environmental monitoring and sustainable energy applications.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
ELECTROCHIMICA ACTA · 2026 · IF 5.8

Boosting Charge transport kinetics by MXene/Na4Fe3(PO4)2P2O7 hetero-structure toward high-rate and stable sodium ion batteries

Sihao Bi,Xiaowen Dai,Xiaolong Wang,Zhengran Wang,Jia Man,Shuo Meng,Jinkui Feng

Sodium-ion batteries (SIBs) show great potential for energy storage, but currently suffer from low cycling stability and volume expansion in the electrode. This study proposes a composite cathode material composed of sodium iron pyrophosphate (NFPP) and MXene via electrostatic self-assembly. The crumpled MXene nanosheets serve as conductive scaffolds, uniformly encapsulating NFPP particles, which effectively mitigates volume expansion and boosts charge transport kinetics by MXene/NFPP hetero-structure. The MXene nanosheets effectively prevent direct contact between NFPP particles and the electrolyte, thereby suppressing NFPP dissolution in the electrolyte and improving cycling stability. And the NFPP/MXene composite cathode surface morphology remained relatively smooth after cycling, and alleviating volume expansion. Furthermore, to prevent the surface of MXene self-restacking, the MXene ratio in the NFPP/MXene composite was optimized. The NFPP/MXene-5 cathode demonstrates superior cycling durability, delivering a specific capacity of 62.7 mAh·g −1 after 1,000 cycles at 1 A·g −1 , accompanied by 76.9% capacity retention. Experimental tests and theoretical calculations confirm the composite’s superior adsorption capability and high-rate performance, providing valuable insights for designing high-rate and stable sodium ion batteries.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。