ACS Omega
·
2025
·
IF 4.3
Lijuan Yuan,Weiguo Liu,Shengshuo Zhang,Lihong Huang,Jiangmin Cheng,Lanxiang He,Hangyu Zhao,Yonghua Yu
In this study, a liquid chromatography method was developed and validated for the accurate determination of carvedilol content while minimizing interference from impurity C and N-formyl carvedilol and allowing precise impurity analysis. The reliability of the method was verified through key parameters such as linearity, precision, accuracy, and stability, ensuring robust performance in the detection and quantification of carvedilol and related impurities. And, the method was tested under varying conditions, including changes in the flow rate, initial column temperature, and mobile phase pH. The results showed that the method demonstrated excellent linearity, with R2 values consistently above 0.999 for all analytes. Precision tests yielded RSD% values below 2.0%, confirming the method’s repeatability. Accuracy assessments revealed recovery rates ranging from 96.5% to 101%, while stability studies indicated minimal variation in peak areas and impurity content over extended time periods. These results confirm the method’s reliability for accurate quantification and impurity analysis in pharmaceutical samples.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Semiconductors
·
2025
·Vol. 46
·期 8
·082801
·
IF 5.3
Jing Guo,Yaru Feng,Jinjun Zhang,Jing Zhang,Ping−An Chen,Huan Wei,Xincan Qiu,Yu Liu,Jiangnan Xia,Huajie Chen,Yugang Bai,Lang Jiang,Yuanyuan Hu
Doping plays a pivotal role in enhancing the performance of organic semiconductors (OSCs) for advanced optoelectronic and thermoelectric applications. In this study, we systematically investigated the doping performance and applicability of the ionic dopant 4-isopropyl-4′-methyldiphenyliodonium tetrakis(penta-fluorophenyl-borate) (DPI-TPFB) as a p-dopant for OSCs. Using the p-type OSC PBBT-2T as a model system, we demonstrated that DPI-TPFB shows significant doping effect, as confirmed by ESR spectra, ultraviolet−visible−near-infrared (UV−vis−NIR) absorption, and work function analysis, and enhances the electronic conductivity of PBBT-2T films by over four orders of magnitude. Furthermore, DPI-TPFB exhibited broad doping applicability, effectively doping various p-type OSCs and even imparting p-type characteristics to the n-type OSC N2200, transforming its intrinsic n-type behavior into p-type. The application of DPI-TPFB-doped PBBT-2T films in organic thermoelectric devices (OTEs) was also explored, achieving a power factor of approximately 10 μW∙m−1∙K−2. These findings highlight the potential of DPI-TPFB as a versatile and efficient dopant for integration into organic optoelectronic and thermoelectric devices.
✓ 已验证
产品关联
DOI
高影响因子
Microstructures
·
2025
·Vol. 5
·期 2
·N
·
IF 9
Canglong Li,Hongli Qi,Jie Huang,Dongping Chen,Yuanzi Cheng,Minghan Xu,Zihao Jiang,Huaming Yu,Yang Huang,Guanghui Li,Yuejiao Chen
The cyclability and reversibility of aqueous zinc-ion batteries (AZIBs) are severely hampered by the safety concerns arising from the Zn dendrite growth. Therefore, a stable anode with inhibited dendrites and side reactions is crucial for AZIBs. Herein, we utilized methyl acetoacetate (MA) as an additive to prevent dendrite growth and enable highly reversible Zn anodes. Benefiting from the nucleophilic groups (carbonyl groups) in MA, MA molecules can preferentially adsorb on the anode/electrolyte interface (AEI), forming a molecular protective layer. Such MA layers can not only regulate the migration and deposition of zinc ions, but also inhibit side reactions induced by the decomposition of free H2O molecules at AEI. Therefore, the symmetric cell with the addition of MA achieves a long-term cycling stability of 1,500 h at 2 mA cm-2 with a capacity of 2 mAh cm-2. In addition, the Zn//NVO full cell using MA-contained electrolyte demonstrates a high specific capacity (138.4 mAh g-1) with an outstanding capacity retention (92.8% after 600 cycles) at 1 A g-1. This work provides a principle for the use of ester-based additives with nucleophilic groups to suppress Zn dendrite growth for highly durable zinc metal anodes.
✓ 已验证
产品关联
DOI
高影响因子
MATERIALS CHEMISTRY AND PHYSICS
·
2025
·
IF 4.7
Hailong Liu,Furong Tao,Hairui Ji,Hailong Zhang,Libin Liu
Developing the coating with superior waterproofing and heat dissipation abilities can prevent electronics from contamination and heat damage. However, most of these coatings show poor transparency and antifouling ability. In this study, a multifunctional ultra-slippery transparent coating (STC) has been developed by simply spraying suspensions consisting of poly(perfluorodecyl acrylate-co-isobornyl acrylate) followed by the curing treatment at room temperature. The thickness of the coating is only 1.5 μm measured by scanning electron microscope. A high transparency of 90 % is observed by UV–vis–NIR. X-ray photoelectron spectroscopy and fourier transform infrared spectroscopy demonstrate successful formation of STC and explain low surface energy. The slippery surface makes the rapid sliding of water and oil droplets when tilted at only 8°. The surface of the coating can be cleaned by water and oil-based liquids due to its excellent slippery property. In addition, the heat dissipation of electronic devices was improved after coating STC. High transparency makes it easier to observe the working condition of precision equipment. Also, the STC protects the electronic components from short circuit destroying during for underwater operation. Therefore, the prepared STC shows great promise for various electronic devices due to its easy fabrication and versatile performance.
✓ 已验证
DOI
高影响因子
Environmental Processes-An International Journal
·
2024
·Vol. 11
·期 2
·1-23
·
IF 3.7
Abdel-Ghafar Hamdy Maamoun,Hamouda Hamed I.
Passive freshwater generation via photothermal membranes represents a sustainable and eco-friendly solution for the water crisis. Herein, we describe a unique method for producing organic fouling-resistant Ag-CNTs/PVDF photothermal membranes using CNTs (multi-walled Carbon Nanotubes) decorated with silver (Ag) nanoparticles deposited on the hydrophilic polyvinylidene difluoride (PVDF) substrate via vacuum filtration. CNTs were decorated with different loads of silver nanoparticles via a wet-impregnation technique. The prepared Ag-CNTs nanocomposites were fully characterized, and the fabricated anti-fouling Ag-CNTs/PVDF photothermal membranes with different loadings of Ag-CNTs nanocomposite were investigated for their surface morphology, roughness, light absorption, surface temperature, contact angle measurement, water evaporation, and antifouling performances. The optimized Ag-CNTs/PVDF photothermal membrane achieved 95% solar light absorption at a surface temperature of 82 ℃ ± 0.5 with significant hydrophobic behavior due to the plasmonic impact of silver nanoparticles. The evaporation rate reached 1.2 kg.m − 2 .h − 1 using 3.5% NaCl solution (simulated to seawater) with a solar thermal conversion efficiency of 75.6% ± 2.0. The optimized Ag-CNTs/PVDF photothermal membrane showed relative stability in the evaporation rate compared to other membranes using 100 mg.L − 1 humic acid solution for 600 min after one week under natural evaporation with the same solution. The developed membrane showed an effective water evaporation rate with organic matter resistance that makes it highly recommended for application to any water source with the capability of resisting harsh conditions of the environment and with continuous freshwater generation.
✓ 已验证
DOI
高影响因子
Small
·
2025
·
IF 12.1
Qi-Sheng Huang,Ruohan Yang,Zhi-Dong Yang,Pei-Chen Zhao,Xiaoliang Wang,Cheng-Hui Li
Stretchable electronic skins with multifunctional sensing capabilities are of great importance in smart healthcare, wearable display electronics, intelligent robots, and human-machine interfaces. Thermoplastic elastomers play a pivotal role as soft substrate in the field of stretchable electronics. However, the dynamic interactions of common thermoplastic elastomers often result in high hysteresis and fatigue damage, limiting their performance and durability. In this study, a highly resilient and fatigue-resistant elastomer is developed by employing La 3+ -complexes as crosslinkers. The woven structure formed between the prepolymer ligands and lanthanum (III) metal ions establishes stable coordination interactions and introduces additional entanglements around the coordination crosslinkers. Furthermore, this woven structure self-assembles into hierarchical nanoarchitectures, which serve as physical crosslinks, significantly enhancing the mechanical strength. As a result, the new elastomers exhibit exceptional mechanical strength (Young's modulus ≈3.47 MPa; maximum stress ≈16.52 MPa), resilience (residual strain during cyclic stretching at 100% strain ≈8%), fatigue resistance (strength retention rate ≈90% after 2000 cycles stretching), and stable thermomechanical properties (creep strain ≈14.43% and residual strain ≈0.22% at 80 °C 0.1 MPa). Leveraging this high-performance polyurethane elastomer, ultra-thin flexible electrodes are fabricated, which can achieve stable and long-term monitoring of the physiological signals of human body.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ENVIRONMENTAL RESEARCH
·
2025
·
IF 7.7
Lina Xiao,Qiuping Zhang,Xinzhi Wang,Huan Zhang,Wenxuan Li,Hao Zhang,Bowen Li
Efficient solar energy storage via light-driven hydrogen (H 2 ) production presents a promising and attractive strategy for addressing the global energy crisis. The integration of platinum (Pt) co-catalyst into metal-organic frameworks (MOFs) to enhance photoinduced charge separation and transfer remains a significant challenge. Herein, a platinum–porphyrin zirconium metal-organic framework (MOF) PCN-223(Pt) is reported, and synthesized using a facile two-solvent strategy. The prepared PCN-223(Pt) is self-sensitized and contains a platinum (Pt) electron-trapping center, which confers excellent visible-light catalytic activity. Under visible-light irradiation, PCN-223(Pt) produced 732 μmol g −1 h −1 of H 2 , a 7.6-fold increase compared to the isostructural PCN-223, which lacks Pt coordination in its porphyrin rings. This improvement results from the photogenerated electrons' efficient transport to the Pt electron-trapping centers, which improves charge carrier separation. Density functional theory calculations demonstrate the positive role that Pt in PCN-223(Pt) play in optimizing the corresponding hydrogen binding energy. PCN-223(Pt) exhibits excellent recyclability, maintaining its catalytic performance across five cycles without significant degradation. These results offer a new approach for designing MOF-based highly efficient visible-light active catalysts.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2025
·
IF 9.7
Lingfei Li,Haishan Liu,Chenhui Xu,Jinghong Chen,Shuqi Deng,Zewen Zhuang,Kaian Sun,Kaili Wang,Wei Yan,Jiujun Zhang
Ruthenium (Ru), with a hydrogen binding energy comparable to platinum (Pt) and stronger oxygen affinity, is a promising platform for designing hydrogen oxidation reaction (HOR) catalysts. Nevertheless, the practical application of Ru-based catalysts is still hampered by limited intrinsic activity and poor CO tolerance. In this work, a RuIr alloy supported on titanium oxide (RuIr/TiO) is obtained as an efficient and durable catalyst for alkaline HOR. The mass activity of RuIr/TiO reaches to 10.36 A mg −1 PGM at the overpotential of 50 mV, which is 4.84 times higher than that of commercial Pt/C. Under 1000 ppm CO/H 2 , RuIr/TiO shows only a 6.85 % drop in current density after a long-time electrolysis, outperforming commercial Pt/C (27.84 %). Experimental characterizations and density functional theory (DFT) calculations reveal that alloying and strong metal-support interaction can induce interfacial charge redistribution and modulate the electronic structure of the active Ru site, thereby accelerate the reaction kinetics of alkaline HOR, optimize H adsorption, and enhance OH binding, leading to the promoted oxidation of CO on the catalyst surface.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2021
·
IF 13.273
Chengyan Wang,Maoru Zhao,Jiani Xie,Chao Ji,Zhengwei Leng,Zhanjun Gu
Duodenal injury caused by radiotherapy of upper tumor is a serious and inescapable complication due to the special anatomical structure and complex intestinal microenvironment of duodenum. However, the prevention and treatment of radiation-induced damage of duodenum are still a challenge in clinic. In this study, [email protected] (FNMT) nanocomposite was obtained by mechanical synthesis which processes good chemical stability, long retention time in duodenum and high free radical scavenging activity. And for the first time we explore its role in protecting duodenum damage caused by X-ray irradiation. On the one hand, fullerenol, with good water solubility, chemical stability, and extensive free radical scavenging ability, can effectively alleviate mitochondrial and DNA damage caused by radiation-generated reactive oxygen species (ROS). On the other hand, nano-montmorillonite (NMMT) is used as a drug carrier, which enables the long residence time of fullerenol in duodenum because of its strong intestinal adhesion ability. By taking advantage of both fullerenol and NMMT, the FNMT nanocomposite significantly reduces radiation-induced diarrhea, weight loss, and duodenum tissue pathological damage of mice. This study not only establishes a new platform for duodenal radioprotective agent based on nanomaterials but also has a potential for clinical transformation.
✓ 已验证
DOI
高影响因子
Nanoscale
·
2022
·Vol. 14
·期 41
·15291-15304
·
IF 8.307
Peisen Zhang,Qiuhong Ouyang,Tianshu Zhai,Jing Sun,Jun Wu,Feng Qin,Ni Zhang,Saisai Yue,Xinchen Yang,Hanyi Zhang,Yi Hou,Li Deng,Fang Wang,Qingyuan Zhan,Qingsong Yu,Meng Qin,Zhihua Gan
The epidemic of multidrug-resistant Gram-negative bacteria is an ever-growing global concern. Polymyxin B (PMB), a kind of “old fashioned” antibiotic, has been revived in clinical practice and mainly used as last-line antibiotics for otherwise untreatable serious infections because the incidence of the resistance to PMB is currently relatively low in comparison with other antibiotics in vivo owing to the unique bactericidal mechanism of PMB. However, serious adverse side effects, including nephrotoxicity and neurotoxicity, hamper its clinical application. Herein, we describe the development of a nanoparticle that can target sites of inflammation and forcedly release PMB specifically in the area of Gram-negative bacteria. This particle was constructed through the electrostatic self-assembly of hyaluronic acid (HA) and PMB molecules in order to realize the safe and effective treatment of pneumonia. After systemic administration, PMB-HA nanoparticles were found to actively accumulate in the lungs, precisely target the CD44 receptors over-expressed on the membrane of activated endothelial cells in inflammatory sites, and then come into contact with the bacteria resident in the damaged alveolar-capillary membrane. Due to the electrostatic and hydrophobic interactions between PMB and the lipopolysaccharide (LPS) in the outer membranes of bacteria, the PMB molecules in the PMB-HA nanoparticles are expected to escape from the nanoparticles to insert into the bacteria via competitive binding with LPS. Through shielding the cationic nature of PMB, PMB-HA nanoparticles also possess outstanding biosafety performance in comparison to free PMB. It is thus believed that this smart delivery system may pave a new way for the resurrection of PMB in the future clinical treatment of bacterial inflammatory diseases.
✓ 已验证
DOI
PubMed
高影响因子
Biomedical Optics Express
·
2022
·Vol. 13
·期 9
·4592-4605
·
IF 3.562
Qin Tan,Shengnan Wu,Shengnan Wu,Shengnan Wu,Shengnan Wu,Zhenchao Liu,Xun Wu,Erik Forsberg,Sailing He,Sailing He,Sailing He,Sailing He
Since the outbreak of coronavirus disease 2019 (COVID-19), efficient real-time monitoring has become one of the challenges faced in SARS-CoV-2 virus detection. A compact all-fiber Mach-Zehnder interferometer optofluidic sensor based on a hollow eccentric core fiber (HECF) for the detection and real-time monitoring of SARS-CoV-2 spike glycoprotein (SARS-CoV-2 S2) is proposed, analyzed and demonstrated. The sensor is comprised of fusion splicing single mode fiber (SMF), hollow core fiber (HCF) and HECF. After the incident light passes through the HCF from the SMF, it uniformly enters the air hole and the suspended micrometer-scale fiber core of the HECF to form a compact all-fiber Mach-Zehnder interferometer (MZI). HECF is side polished to remove part of the cladding that the suspended fiber core can contact the external environment. Subsequently, the mouse anti SARS-CoV-2 S2 antibody is fixed on the surface of the suspended-core for the sake of achieving high sensitivity and specific sensing of SARS-CoV-2 S2. The limit of detection (LOD) of the sensor is 26.8 pM. The proposed sensor has high sensitivity, satisfactory selectivity, and can be fabricated at low cost making it highly suitable for point-of-care testing and high-throughput detection of early stage of COVID-19 infection.
✓ 已验证
DOI
PubMed
高影响因子
Biomaterials Science
·
2022
·Vol. 10
·期 22
·6472-6485
·
IF 7.59
Chenyuan Gao,Lei Fu,Yingjie Yu,Xin Zhang,Xiaoping Yang,Qing Cai
Osteochondral defects pose an enormous challenge due to the lack of an effective repair strategy. To tackle this issue, the importance of a calcified cartilage interlayer (CCL) in modulating osteochondral regeneration should be valued. Herein, we proposed that an extracellular matrix (ECM) derived from a suitable cell source might efficiently promote the formation of calcified cartilage. To the end, cell sheets from four kinds of cells, including bone marrow mesenchymal stem cells (BMSCs), pre-osteoblasts (MC3T3), chondrocytes (Cho), and artificially induced hypertrophic chondrocytes (HCho), were obtained by seeding the cells on electrospun fibrous meshes, followed by decellularization to prepare decellularized ECMs (D-ECMs) for BMSC re-seeding and differentiation studies. For cell proliferation, the BMSC-derived D-ECM exhibited the strongest promotion effect. For inducing the hypertrophic phenotype of re-seeded BMSCs, both the BMSC-derived and HCho-derived D-ECMs demonstrated stronger capacity in up-regulating the depositions of related proteins and the expressions of marker genes, as compared to the MC3T3-derived and Cho-derived D-ECMs. Accordingly, from the histological results of their subcutaneous implantation in rats, both the BMSC-derived and HCho-derived D-ECMs displayed obvious Masson's trichrome and Safranin-O/Fast-Green staining colors simultaneously, representing the characteristics related to osteogenesis and chondrogenesis. Differently, MC3T3-derived and Cho-derived D-ECMs were mainly detected during the osteogenic or chondrogenic expression, respectively. These findings confirmed that the BMSC-derived D-ECM could induce hypertrophic chondrocytes, though being a little inferior to the HCho-derived D-ECM. Overall, the BMSC-derived D-ECM could be a potential material in constructing the interlayer for osteochondral tissue engineering scaffolds to improve the regeneration efficiency.
✓ 已验证
DOI
PubMed
高影响因子