ACS Applied Materials & Interfaces
·
2021
·
IF 9.229
Yaru Wang,Jiaqin He,Xunxun Li,Mengmeng Wang,Yuanbo Zhou,Jun Xiao,Dongyun Chen,Jianmei Lu
MnO2 nanotubes loaded with Pt and Ni–Fe spinel were synthesized using simple hydrothermal and sol–gel techniques. After loading with Ni–Fe spinel, the specific surface area of the material increases 3-fold. This change helped to provide more active sites and facilitated the association between the catalyst and volatile organic compounds (VOCs). X-ray photoelectron spectroscopy determined that the adsorbed oxygen concentrations were all greatly increased after Pt loading, indicating that Pt promoted the adsorption of oxygen and so accelerated the combustion process. The performance of the catalyst after loading with 2 wt % Pt was greatly improved, such that the T90 for benzene decomposition was decreased to 113 °C. In addition, the 2% Pt/2Mn@NFO exhibited excellent low-temperature catalytic activity when reacting with low concentrations of toluene and ethyl acetate. This work therefore demonstrates a viable new approach to the development of Mn-based catalysts for the low temperature catalytic remediation of VOCs.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF HAZARDOUS MATERIALS
·
2021
·
IF 10.588
Jiajun Wen,Zhongwu Li,Changsheng Jin,Jia Chen,Changqing Cai
Dissolved organic matter (DOM) or iron/manganese (hydro)oxides were important factors in the migration of Cd in sediments of wetlands. DOM and Fe oxides simultaneously affect the longitudinal and transverse migration of Cd in wetlands sediments of plants was still unclear. In this study, a 14-day rhizobox experiment was conducted and the result showed that the rhizosphere effect of Cd migration was only limited to the upper layer of sediments (− 2 to − 4 cm). Fe with fulvic acid (FA) simultaneously existed can precipitate Cd(II) from supernatant to sediments downward. Fe oxides at sediment concentration could effectively prevent Cd(II) from migrating to root surface (0.21 vs 0.02 at%). While Fe oxides with FA together at sediment concentration could effectively promoted the migration of Cd(II) to root surface (0.07 vs 0.08 at%). The formation of organo-metallic complexes of Fe in the presence of FA profoundly proved this finding (increased by ~33.0%). And the polysaccharides and aromatics in organic matter were the chief functional groups participating in the incorporation of Cd and Fe oxides. The findings reveal the migration rules of Cd(II) in sediments by FA and Fe oxides and give an insight into the mechanisms of Cd(II) migration to the root surface around wetland plants.
✓ 已验证
DOI
PubMed
高影响因子
Advanced Science
·
2021
·Vol. 9
·期 4
·2104237
·
IF 16.806
Qinglin Han,Ximeng Zhao,Yuhong Luo,Lanlan Wu,Shujuan Sun,Jingde Li,Yanji Wang,Guihua Liu,Zhongwei Chen
Rational design of metal oxide supported non-precious metals is essential for the development of stable and high-efficiency oxygen reduction reaction (ORR) electrocatalysts. Here, an efficient ORR catalyst consisting of binary Fe/Co nanoclusters supported by defective tungsten oxide and embedded N-doped carbon layer (NC) with a 3D ordered macroporous architecture (3DOM Fe/Co@NC-WO 2− x ) is developed. The oxygen deficient 3DOM WO 2− x not only serves as a porous and stable support, but also enhances the conductivity and ensures good dispersion of the binary Fe/Co nanocluster, benefiting its ORR catalytic activity. Theoretical calculation shows that there exists a synergistic effect of electron transfer from Fe to Co in the supported binary Fe/Co cluster, promoting the ORR reaction energetics. Accordingly, the 3DOM Fe/Co@NC-WO 2− x catalyst exhibits excellent ORR activity in alkaline medium with a half wave potential ( E 1/2 ) of 0.87 V higher than that of Pt/C (0.85 V). The zinc–air batteries assembled by 3DOM Fe/Co@NC-WO 2− x cathode deliver a higher power density and specific capacity than that of Pt/C. A new strategy of combining synergistic binary-metal nanoclusters and conductive metal oxide support design is provided here to develop efficient and durable ORR electrocatalyst.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ENVIRONMENTAL SCIENCE & TECHNOLOGY
·
2021
·
IF 9.028
Liying Wu,Zhiqiang Sun,Yufei Zhen,Shishu Zhu,Chen Yang,Jing Lu,Yu Tian,Dan Zhong,Jun Ma
Ubiquitous oxygen vacancies (Vo) existing in metallic compounds can activate peroxymonosulfate (PMS) for water treatment. However, under environmental conditions, especially oxygenated surroundings, the interactions between Vo and PMS as well as the organics degradation mechanism are still ambiguous. In this study, we provide a novel insight into the PMS activation mechanism over Vo-containing Fe–Co layered double hydroxide (LDH). Experimental results show that Vo/PMS is capable of selective degradation of organics via a single-electron-transfer nonradical pathway. Moreover, O2 is firstly demonstrated as the most critical trigger in this system. Mechanistic studies reveal that, with abundant electrons confined in the vacant electron orbitals of Vo, O2 is thermodynamically enabled to capture electrons from Vo to form O2•– under the imprinting effect and start the activation process. Simultaneously, Vo becomes electron-deficient and withdraws the electrons from organics to sustain the electrostatic balance and achieve organics degradation (32% for Bisphenol A without PMS). Different from conventional PMS activation, under the collaboration of kinetics and thermodynamics, PMS is endowed with the ability to donate electrons to Vo as a reductant other than an oxidant to form 1O2. In this case, 1O2 and O2•– act as the indispensable intermediate species to accelerate the circulation of O2 (as high as 14.3 mg/L) in the micro area around Vo, and promote this nano-confinement electron-recycling process with 67% improvement of Bisphenol A degradation. This study provides a brand-new perspective for the nonradical mechanism of PMS activation over Vo-containing metallic compounds in natural environments.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
MICROPOROUS AND MESOPOROUS MATERIALS
·
2021
·
IF 5.455
Qing Zhang,Yi Zhai,Fumin Wang,Xubin Zhang,Guojun Lv,Yongkui Liu,Mengyue Li,Mengyao Li
Hierarchical Fe-doped MFI/MCM-41 composites (Fe-HMZs) were one-pot hydrothermal synthesized by partial transformation strategy using conventional CTAB as a dual-functional template. The hierarchical Fe-doped MFI/MCM-41 composites possess ordered mesopores and crystallized MFI structure. The effect of addition amount of NaOH and CTAB as well as the type of the alkali source on the formation of hierarchical Fe-MFI/MCM-41 composites have been investigated in detail. In addition, the temperature-gradient treatment plays the vital roles in the formation of MFI and the possible formation mechanism has been proposed. The obtained hierarchical Fe-HMZ-40 sample exhibits outstanding catalytic performance for phenol hydroxylation and 48% of phenol conversion as well as 89% of dihydroxybenzene selectivity could be achieved, which are ascribed to the more accessible active sites endowed by the significant diffusion ability of ordered mesopores. Compared with Fe-MCM-41 sample, the hydrothermal stability is improved because of the presence of MFI structure.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2021
·
IF 5.316
Richao Niu,Rubing Han,Yin Huang,Liming Dai,Hongan Zhao,Yining Wang,Junwu Zhu,Shaochun Tang,Jingwen Sun
Bimetallic compounds can offer higher electrochemical activity and capacity than monometallic ones owing to their rich chemical valences. Herein, the performance enhancement of monometallic compounds by introducing metal ions was demonstrated, and the effects of different metal ions were investigated. Through introduction of metal ions into LDHs under a hydrothermal environment, one kind of 2D/2D hierarchical CoM-LDH(M=Fe or Mn)/MXene composites were successfully synthesized. It was found that the introduced Fe ions extremely improves the specific capacity and the introduced Mn ions extremely enhances the rate capability of monometallic composite. The fabricated CoFe-LDH/MXene (CF-MX10) electrode exhibits a specific capacity of 808 F g −1 at current density of 0.5 A g −1 , much higher than that of CoMn-LDH/MXene (CM-MX10, 562 F g −1 ) and Co(OH) 2 /MXene (C-MX10, 270 F g −1 ). The high areal capacity or rate capacity are attributed to strong synergistic effect between CoM-LDH and MXene, as well as the introduction of metal ions that change the architecture and the electronic or ionic conductivity , which leads to much improved electrical conductivity and electrochemical stability.
✓ 已验证
产品关联
DOI
高影响因子
ADVANCED POWDER TECHNOLOGY
·
2021
·
IF 4.833
Bao Liu,Sichao Lou,Yang Zeng,Yan Qin,Wenqing Zhang,Lingfan Zhang,Xin Liu
In this study, Fe-Zr-La tri-metal oxide (FZLO) composite was synthesized by co-precipitation method as new complex adsorbent for effective phosphate removal from aqueous media. The scanning electron microscopic study revealed that the adsorbent was of amorphous structure and consisted of the inhomogeneous aggregated nanoparticles with different sizes. Various influencing parameters such as pH values, initial concentration of phosphate ions, contact time, temperature and co-existing anions were studied to perform batch adsorption experiments. The experimental results demonstrated that the adsorption process was highly pH-dependent and obtained the maximum phosphate adsorption capacity of 101.0 mg g −1 at pH = 6. The adsorption process occurred on surface of FZLO composite has been found to be mono-layered and chemisorption dominated in nature as the data fitted well to Langmuir isotherm as well as the pseudo-second-order kinetic model. The structure and properties of the adsorbent before and after adsorption using FT-IR, XRD and XPS techniques suggested that the adsorption mechanisms involved electrostatic attraction, complexation and ligand exchange. After the adsorption, the remained P concentration met the permissible limit by the Environmental Protection Agency. The Fe-Zr-La tri-metal oxide composite could be a promising adsorbent for phosphate removal from aqueous media.
✓ 已验证
产品关联
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2021
·
IF 7.312
Jiahao Wei,Jingtao Bi,Longfei Zhang,Dandan Han,Junbo Gong
Constructing a robust catalytic membrane with simultaneous fast liquid transport and efficient organic pollutant degradation is appealing for efficient organic wastewater treatment. Herein, Fe-doped CoTiO 3 grew uniformly on the SiO 2 fiber membrane to form a catalytic membrane (FCTSM). Benefiting from the great water wettability, FCTSM facilitated fast water transport with low energy consumption and exhibited high physical separation performance (98.4% rejection of oil in the emulsion). The catalytic active sites were fully exposed on membrane surface, which could easily react with peroxymonosulfate and target pollutants. Under the gravity-driven permeation, FCTSM performed decent catalytic degradation property (e.g., 96.3% removal of nimesulide with the flux of 300 L/m 2 ·h) in the presence of peroxymonosulfate. Electron paramagnetic resonance (EPR) spectra and quenching tests found that SO 4 •− and 1 O 2 were involved in pollutant degradation, and the possible degradation pathway of nimesulide was investigated. Besides, the toxicity analyses based on quantitative structure–activity relationship (QSAR) verified the reduced toxicity of degradation products. This work provides an insight into the design of multifunctional membranes and advances the potential applications of heterogeneous catalytic oxidation in environmental remediation.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2021
·
IF 5.316
Jianan Wang,Jianwei Liu,Qianyue Ma,Xin Chen,Shiyi Sun,Hao Xu,Lei Zhu,Ze Wang,Jiangtao Feng,Wei Yan
Development of high-loading and high-energy-density lithium-sulfur (Li-S) batteries has aroused increasing research interests recently. However, the performance of a conventional two-dimensional Al foil current collector is limited by its smooth/nonporous surface and poor flexibility, which is unfavorable for the achievement of high sulfur loading and sufficient polysulfide adsorption. Hence, a three-dimensional porous Fe-doped polypyrrole aerogel (FPA) is developed by a simple and scalable strategy combing the solution reaction with the freeze-drying technique, aiming at acting as the current collector of cathode to address these issues in Li-S batteries. This FPA possesses a conductive porous network structure with high elasticity and abundant Fe dopants , which can not only buffer the large volume change of sulfur and ensure fast ion/electron transfer, but also effectively anchor the polysulfides and lower the negative polarization effect during cycling. As a result, the FPA@S cathode delivers a high initial capacity of 1196.7 mAh g −1 at 0.2 C and a retained capacity of 829.5 mAh g −1 after 200 cycles, with stabilized Coulombic efficiency and excellent rate performance. This FPA@S cathode also achieves a high cell-level gravimetric energy density of 199.7 Wh kg cell −1 even under a high sulfur-loading (8.57 mg cm −2 ) and low electrolyte/sulfur ratio (6 mL g −1 ), demonstrating its practical potential in future advanced high-energy battery systems.
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2021
·
IF 5.816
Zejie Zhang,Yihui Wu,Deping Zhang
The hydrogen evolution reaction (HER) using earth-abundant noble-metal-free catalysts has gained substantial interest in electrocatalytic water splitting technologies, particularly in water-alkali electrolyzers. The development of highly-efficiency and durable inexpensive electrocatalysts to accelerate the kinetics of HER is still a formidable challenge. In this study, nickel–iron (Ni–Fe) electrocatalyst directly grown on backbones of Ni foam (NF) substrate was facile prepared via one-step potentiostatic electrodeposition method. The obtained Ni–Fe electrocatalyst exhibits a film-like structure. Owing to high electrical conductivity and composition optimization, the synthesized Ni–Fe electrocatalyst with Ni/Fe atomic ratio of c.a. 65:35 possesses an attractive electrocatalytic activity with low overpotentials of 142, 205, and 239 mV at 10, 50, and 100 mA·cm −2 in alkaline electrolyte , respectively.
✓ 已验证
产品关联
DOI
高影响因子
CHEMOSPHERE
·
2021
·
IF 7.086
Chao Xue,Wanling Cai,Xiulan Weng,Gary Owens,Zuliang Chen
The use of biomass for the synthesis of value-added products, such as functional nanomaterial for the removal of contaminants, is a challenge. In this study, hybrid bimetallic Fe/Ni nanoparticles and reduced graphene supported bimetallic Fe/Ni nanoparticles (Fe/Ni-rGO) were prepared via a one-step green synthesis using green tea extract, and thereafter evaluated for the simultaneous removal of rifampicin (RIF) and Pb(II) from aqueous solution. The efficiencies of Pb(II) and RIF removal by Fe/Ni-rGO were 87.5 and 96.8%, respectively. The removal performance of the hybrid Fe/Ni-rGO was better than either n Fe/Ni, rGO, or Fe-rGO. Detailed characterization and analyses of Fe/Ni-rGO indicated that both Fe and Ni nanoparticles were evenly distributed over the surface of rGO and that aggregation of Fe, Ni nanoparticles, and stacking of rGO in the hybrid were decreased. Furthermore, while LC-TOF-MS analysis showed that RIF was degraded into small-molecule fragments, XPS showed that Pb(II) was not reduced to Pb 0 . The major conditions impacting removal efficiency, adsorption kinetics, and fit to adsorption isotherm models were examined to better understand the removal mechanism. While the adsorption of both contaminants fit well a pseudo-second-order kinetic model, the adsorption of RIF fit the Freundlich isotherm model best, while the adsorption of Pb(II) fit the Langmuir isotherm model best. Thus, the removal mechanism of both contaminants firstly being chemical adsorbed onto the surface, while n Fe/Ni continues to participate in the catalytic reduction of RIF. Moreover, Fe/Ni-rGO could be reused and performed well for wastewater treatment , thus suitable as a practical resource recycling technology .
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ELECTROCHIMICA ACTA
·
2021
·
IF 6.901
Yu Huang,Yihui Wu,Zejie Zhang,Lanlan Yang,Qianhao Zang
Exploring cost-effective and high-efficiency noble-metal free electrocatalysts for oxygen evolution reaction (OER) are of critical importance to the area of renewable energy storage and conversion systems. Herein, Ni–Fe–Mo films were fabricated via electrodeposition method with a very high current density. The film exhibits excellent activity towards OER with a overpotentials of 306 mV at current density of 10 mA·cm −2 and a lower Tafel slope of 77.1 mV·dec −1 under alkaline conditions (30 wt.% KOH). The synergistic effect of the Mo, Ni, and Fe contribute the improved catalytic activity for OER.
✓ 已验证
产品关联
DOI
高影响因子