ADVANCED FUNCTIONAL MATERIALS
·
2018
·Vol. 28
·期 35
·1803117
·
IF 13.325
Qian Zhang,Qijie Liang,Qingliang Liao,Mingyuan Ma,Fangfang Gao,Xuan Zhao,Yiding Song,Lijuan Song,Xiaochen Xun,Yue Zhang
Raindrop falling, which is one kind of water motions, contains large amount of mechanical energy. However, harvesting energy from the falling raindrop to drive electronics continuously is not commonly investigated. Therefore, a self-cleaning/charging power system (SPS) is reported, which can be exploited to convert and store energy from falling raindrop directly for providing a stable and durable output. The SPS consists of a hydraulic triboelectric nanogenerator (H-TENG) and several embedded fiber supercapacitors. The surface of H-TENG is amphiphobic, enabling the SPS self-cleaning. The fiber supercapacitor which uses α-Fe 2 O 3 /reduced graphene oxide composite possesses remarkable specific capacitance, excellent electrical stability, and high flexibility. These properties of the fiber supercapacitor make it suitable for a wearable power system. A power raincoat based on the SPS is demonstrated as application. After showering by water flow, which simulates falling raindrops, for 100 s, the power raincoat achieves an open-circuit voltage of 4 V and lights a light-emitting diode for more than 300 s. With features of low cost, easy installation, and good flexibility, the SPS harvesting energy from the falling raindrop renders as a promising sustainable power source for wearable and portable electronics.
✓ 已验证
DOI
高影响因子
NEW JOURNAL OF CHEMISTRY
·
2014
·Vol. 38
·期 6
·2604-2610
·
IF 3.159
Zhi-Yuan Yan,Bing Yan
This paper provides the strategy to prepare luminescent sandwich structured hybrid materials [Ln(L)4]−IM+–Al/Ti (Ln = Eu, Sm; L = 2-thenoyltrifluoroacetonate (TTA); Ln = Tb, L = trifluoroacetylacetonate (TAA)) based on sol–gel derived hosts of Ti–O or Al–O networks. The ionic liquid compound 3-(2-carboxyethyl)-1-methylimidazolium bromide (IM+Br−) plays double roles of both connecting the lanthanide compounds with an ion exchange reaction and linking matrices through its carboxylic group. Subsequently, a series of hybrid soft materials of alumina and titania xerogels centered with lanthanide complexes are prepared via the hydrolysis and polycondensation of aluminum isopropoxide or tetrabutyl titanate. These hybrid soft xerogels are characterized under FTIR, XRD, UV-VIS diffuse reflection absorption spectra, SEM, TGA and especially luminescence spectroscopy. The results prove that it is an effective way to prepare [Ln(L)4]−IM+–Al/Ti hybrid soft materials with favorable photoluminescent behaviors. It is noticeable that [Sm(TTA)4]−IM+–Ti can render white light under broadband excitation for a certain content of Sm3+.
✓ 已验证
DOI
高影响因子
NEW JOURNAL OF CHEMISTRY
·
2019
·Vol. 43
·期 25
·10025-10029
·
IF 3.069
Xinrong Shi,Fangjun Huo,Jianbin Chao,Yongbin Zhang,Caixia Yin
The role of hydrazine in production is not to be underestimated due to its strong reducibility. However, every coin has two sides. Hydrazine represents a great hazard to the environment, which cannot be ignored. Aiming to prevent harm to people or the environment, a new near-infrared fluorescent probe is presented. This probe is specifically designed to sense hydrazine vapor accumulated in an enclosed space and detect excessive hydrazine in water samples. It shows good selectivity and a turn-on effect, as well as a remarkable color change that can be distinguished by the naked eye. This effect has been utilized for quantitative detection in real water samples. Moreover, the color change of the probe adsorbed on filter paper can be observed by the naked eye to monitor the presence of hydrazine in the air in real time; this property of the probe is expected to be used for hydrazine detection in industrial environments.
✓ 已验证
DOI
高影响因子
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
·
2024
·Vol. 121
·期 51
·e2416835121
·
IF 9.4
Hui Luo,Hongli Xuan,Dong Wang,Ziwan Du,Zhongyang Li,Kejun Bu,Songhao Guo,Yuhong Mao,Fujun Lan,Fuyang Liu,Yanfeng Yin,Wenming Tian,Qingyang Hu,Gang Liu,Haozhe Liu,Qiaoshi Zeng,Yang Ding,Yongping Fu,Qian Li,Shengye Jin,Wenge Yang,Ho-Kwang Mao,Xujie Lü
High pressure can create extreme conditions that enable the formation of novel materials and the discovery of new phenomena. However, the ability to preserve the desirable characteristics of materials obtained under high pressure has remained an elusive challenge, as the pressure-induced changes are typically reversible, except for the pressure-induced chemical reactions such as polymerization of hydrocarbons. Here, we propose the concept of “pressure aging” (PA) that enables the permanent locking-in of high-pressure structures and their associated enhanced properties in functional materials. Specifically, through the application of PA at 3.3 GPa for 24 h, the two-dimensional ferroelectric CuInP2S6 exhibits a permanent change in Cu configuration after the pressure is fully released. This leads to a 2.5-fold enhancement in remanent polarization and an increase in Tc from 317 K to 583 K. In contrast, the samples underwent a compression–decompression cycle but without PA showed only reversible changes in their characteristics. We elucidate the relaxation dynamics during PA using the Kohlrausch–Williams–Watts function, providing valuable insights into the temporal evolution of both structural and property changes. Furthermore, the broad applicability of PA strategy has been validated across different materials, underscoring its versatility. Notably, the pressures involved are industrially attainable, and the sample sizes are scalable. Consequently, the implementation of this impactful PA approach introduces a groundbreaking unique dimension to high-pressure research, with significant potential across various scientific domains.
✓ 已验证
DOI
高影响因子
Polymer Chemistry
·
2017
·Vol. 8
·期 35
·5415-5426
·
IF 5.375
Yuanyuan Ju,Mingming Zhang,Hanying Zhao
The bio-functionalization of poly(ε-caprolactone) (PεCL) provides an approach to broaden the applications of the polymer in medical and biological engineering fields. In this research, PεCL with pendant glutathione (GSH) or L-carnosine was synthesized by a combination of ring-opening copolymerization, Cu(I)-catalyzed Huisgen 1,3-dipolar cycloaddition reaction (click reaction) and thiol-disulfide exchange reaction. The ring-opening copolymerization of εCL and α-chloro-ε-caprolactone (αCl-εCL) was employed in the synthesis of the PεCL-co-P(αCl-εCL) copolymer. The pendent chlorides were converted into azides by a reaction with sodium azide. N-Hydroxysuccinimide (NHS) groups were introduced into the polymer backbones by the click reaction. PεCL with pendant pyridyl disulfide groups was prepared by a reaction of N-hydroxysuccinimide (NHS) activated ester and pyridine dithioethylamine. Peptide modified PεCL were synthesized by thiol-disulfide exchange reactions between thiol groups on GSH (or thiol-modified L-carnosine) and the pendant pyridyl disulfide groups on the polymer chains. The synthesized copolymers were analyzed by size exclusion chromatography, FTIR, 1H NMR and differential scanning calorimetry. The bio-graft copolymers are able to self-assemble into micelles or vesicles in aqueous solutions, depending on the pH values of the solutions. The assembled structures formed by the bio-graft copolymers in aqueous solutions are essentially nontoxic toward MCF-7 and COS-7 cells. The functionalization of the peptide-stabilized assembled structures with lysozyme was also investigated in this research.
✓ 已验证
DOI
高影响因子
Journal of Materials Chemistry C
·
2016
·Vol. 4
·期 25
·6063-6069
·
IF 5.066
C. R. Ma,J. H. Yan,P. Liu,Y. M. Wei,G. W. Yang
Nonlinear optical (NLO) nanostructures have played important roles in frequency conversion, optical switching, information storage and biomedical imaging. Although previous designs have focused on photonic crystals and metal plasmonic nanostructures, complex structure, large ohmic loss and Joule heating greatly hinder their practical applications. Beyond photonic crystals and metal plasmonic nanostructures, all-dielectric materials (ADMs) bring new ways to generate NLO behavior at subwavelength scales. We, for the first time to our knowledge, demonstrate irregular-geometry induced second harmonic generation (SHG) enhancement from an individual all-dielectric SiC nanoparticle. SHG conversion efficiency of single irregular-geometry SiC nanoparticles increases to 10−5 under an average excitation power of 6 mW at 880 nm excitation, thirtyfold higher than that of SiC nanosphere. We also establish that not only electric dipole mode but also magnetic dipole mode can exist in the vicinity of nanoparticles in mid-refractive (2 < n < 3) ADMs, and the stronger enhancement of the magnetic response induced by the irregular-geometry makes a great contribution to the SHG enhancement. A modified formula that includes electric and magnetic contributions is proposed to predict the SHG enhancement from ADMs. This discovery makes geometry-tuning all-dielectric nanoparticles promising in NLO nanostructures of nanophotonics in the future.
✓ 已验证
DOI
高影响因子
Frontiers in Genetics
·
2022
·
IF 4.772
Liexi Xu,Zhengrong Huang,Zihang Zeng,Jiali Li,Hongxin Xie,Conghua Xie
Background: Abnormal DNA methylation of gene promoters is an important feature in lung adenocarcinoma (LUAD). However, the prognostic value of DNA methylation remains to be further explored. Objectives. We sought to explore DNA methylation characteristics and develop a quantifiable criterion related to DNA methylation to improve survival prediction for LUAD patients.Methods: Illumina Human Methylation450K array data, level 3 RNA-seq data and corresponding clinical information were obtained from TCGA. Cox regression analysis and the Akaike information criterion were used to construct the best-prognosis methylation signature. Receiver operating characteristic curve analysis was used to validate the prognostic ability of the DNA methylation-related feature score. qPCR was used to measure the transcription levels of the identified genes upon methylation.Results: We identified a set of DNA methylation features composed of 11 genes (MYEOV, KCNU1, SLC27A6, NEUROD4, HMGB4, TACR3, GABRA5, TRPM8, NLRP13, EDN3 and SLC34A1). The feature score, calculated based on DNA methylation features, was independent of tumor recurrence and TNM stage in predicting overall survival. Of note, the combination of this feature score and TNM stage provided a better overall survival prediction than either of them individually. The transcription levels of all the hypermethylated genes were significantly increased after demethylation, and the expression levels of 3 hypomethylated proteins were significantly higher in tumor tissues than in normal tissues, as indicated by immunohistochemistry data from the Human Protein Atlas. Our results suggested that these identified genes with prognostic features were regulated by DNA methylation of their promoters.Conclusion: Our studies demonstrated the potential application of DNA methylation markers in the prognosis of LUAD.
✓ 已验证
DOI
高影响因子
Molecular Catalysis
·
2018
·
IF 0
Haibo Chang,Qingshuo Li,Xuemin Cui,Hongxia Wang,Congzhen Qiao,Zhanwei Bu,Tong Lin
In this study, we have for the first time demonstrated that polyvinyl alcohol (PVA) and potassium iodide (KI) can form an efficient catalytic system for synthesis of cyclic carbonates from epoxide and CO 2 . The catalytic reaction happens in solvent-free conditions. A synergetic effect occur between PVA and KI which considerably increases the reaction yield. This binary catalytic system is mainly suitable for mono-substituted terminal epoxides. In the optimized reaction condition, over 90% reaction yield can be achieved. The binary catalyst is reusable and can be recycled at least five times without significant loss of the catalytic activity. The PVA hydrolysis degree affect the catalytic activity as well. A possible mechanism of synergetic effect of the binary system was proposed. PVA and KI may form a non-toxic, low cost, recyclable, highly-efficiency catalyst for fixing CO 2 through cycloaddition with epoxides.
✓ 已验证
DOI
THIN SOLID FILMS
·
2013
·
IF 1.604
Mi Wang,Yanfeng Gao,Zhang Chen,Chuanxiang Cao,Jiadong Zhou,Lei Dai,Xuhong Guo
High-quality transparent and conductive tungsten-doped tin oxide (SnO 2 :W) thin films with different thickness (from 60 to 600 ± 10 nm) were fabricated on quartz glass substrates by a solution-based method. A stable solution was prepared from tin chloride and ammonium tungstate together with polyvinyl alcohol as a film-forming promoter. It was found that all films showed homogeneous composition, smooth surface with no cracks and high transparency with the optical band gap ranging from 3.93 to 4.31 eV. The effect of tungsten concentration, spin rate and annealing temperature on the morphological, electrical and optical properties of the films has been investigated. W doping has a large influence on the microstructure and the conductivity of the SnO 2 thin films . The lowest resistivity of 2.8 × 10 − 3 Ω · cm was obtained for a SnO 2 : 3 at% W film, which was prepared at 3000 rpm and annealed at 800 °C in air. An eight-layer film with a sheet resistance of 60 Ω/□ and a thickness of 606 nm could be fabricated by multiple coating operation, which still exhibited an optical transmittance of over 80% in the visible region from 400 to 700 nm.
✓ 已验证
DOI
高影响因子
Journal of Materials Chemistry A
·
2023
·Vol. 11
·期 8
·4310-4318
·
IF 11.9
Huihong Xu,Han Wan,Rui Xu,Zeqing Hu,Xiaolong Liang,Zhou Li,Jiming Song
Alloying SnTe with a well-designed secondary phase, particularly one with low lattice thermal conductivity, serves as an efficient route to realize excellent thermoelectric performance of inferior SnTe with intrinsically large thermal conductivity, which will eventually accelerate PbTe replacement. Herein, the results validate that CuSbSe2 alloying (SnTe-CuSbSe2) can optimize the thermal transport properties of SnTe and help to advance the thermoelectric performance. Comprehensive evidence from microstructure characterization manifests that multifarious defects, such as Cu-based nanoprecipitates, dislocations and point defects, are induced into the SnTe matrix after CuSbSe2 alloying. These defects act as all-scale phonon scattering sources to achieve full-wavelength phonon scattering and promote a significant reduction in lattice thermal conductivity, and an ultra-low lattice thermal conductivity of 0.40 W m−1 K−1 is obtained for the SnTe-5% CuSbSe2 sample at 823 K. Moreover, deterioration in electrical conductivity also causes a related reduction in electronic thermal conductivity, thereby leading to a substantial reduction in the total thermal conductivity. In addition, the enhancement of m* originating from Cu and Sb doping rises the Seebeck coefficient in SnTe and guarantees a relatively competitive power factor. As a result, based on the significant reduction in the total thermal conductivity, as well as maintenance of the higher power factor, the SnTe-5% CuSbSe2 sample achieves a maximum ZT value of 1.1 at 823 K, which is greatly improved compared with the pristine counterpart (ZT = 0.5). These findings also reveal the tremendous prospect of boosting the thermoelectric performance of SnTe through CuSbSe2 and other I–V–VI2 compounds alloying.
✓ 已验证
DOI
高影响因子
Desalination and Water Treatment
·
2024
·
IF 1
Ming-xi Wang,Hong-yan Deng,Wen-bin Li,Jiang-ming Ouyang,Zi-shan Lu,Zhi-qiang Zhang
The remediation of contaminated soil by invasive plant resources is a new research hotspot. Different proportions (0%, 1%, 2%, 5%, and 10%) of exudates (E) from the living roots (LR-E), dead roots (DR-E), and fallen leaves (FL-E) of the invasive plant Alternanthera philoxeroides were added to a tetracycline (TC) adsorption system to study the influence of extracts from invasive plant roots and litter (fallen leaves and dead roots) on the adsorption of TC by clays (bentonite [B] and kaolin [K]). Then, the batch method was used to study the isotherm adsorption characteristics of TC, and the effects of temperature, pH, and ionic strength on TC adsorption were compared. The following results were obtained: (1) The adsorption isotherms of TC on B and K under the coexistence of E were all consistent with the Henry model, and the adsorption amount of TC increased by 1.04–1.81 times after the addition of E. The addition of LR-E had a strong promoting effect on TC adsorption by the two clays. (2) The adsorption amount of TC on each tested clay with the coexistence of E was positively correlated with temperature within the range of 5°C–40°C. Thermodynamic analysis showed that TC adsorption was a spontaneous, endothermic, and entropy-adding reaction. (3) When the pH was changed from 2 to 10, the adsorption amount of TC on clay decreased. The range of this decrement narrowed with the increase in coexisting E. (4) When the ion concentration was changed from 0.01 to 0.5 mol/L, the adsorption amount of TC on B decreased with the increase in ionic strength, whereas that on K first increased and then decreased. In conclusion, invasive plant extracts can improve the adsorption of TC on clay, and the adsorption effect is superior when the temperature is high and the pH is low.
✓ 已验证
DOI
高影响因子
SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY
·
2019
·
IF 2.931
Miao Yu,Chun-Shan Zuo,Ning Zhang
Rational design chelating fluorescent sensors probing metal ions in biological system are continuously hot essays nowadays, especially for zinc detection. Herein, a naphthylideneimine based zinc fluorescence probe ( 3 ) was prepared and characterized in this work. Structural features and optical properties of 3 and its metallic complexes were characterized. Fluorescent experiment indicates 3 is extremely sensitive and selective for Zn 2+ with a strong fluorescence enhancement (∼34 folds) in aqueous buffer solution with a limit of detection (LOD) of 3.78 × 10 −7 mol L −1 . Formation constant (log K a ) of the chelating complex of 3 and Zn 2+ ion was determined to be 4.45. Theoretical studies were carried out to get deep insight into the response mechanism in the sensing process. Density functional theory (DFT) methods calculated formation Gibbs free energy (Δ r G m ө ) of the deprotonated complexes model ( 3 2− ⊃ Zn ) is −2.9 kcal/mol, which is in good agreement with the experimental result. The calculation results show that the low excitation states can be ascribe to S0 → T2 and S0 → S1 at 390–430 nm and 310–330 nm, respectively, due to the π → π∗ transition. Finally, yeast cell imaging experiments indicate that 3 can monitor intracellular Zn 2+ as well. These findings would enable this fluorescent probe to be used as a Zinc sensor.
✓ 已验证
DOI
高影响因子