CHEMICAL ENGINEERING JOURNAL
·
2023
·
IF 15.1
Xiangyu Yang,Fucheng Guo,Tao Liu,Qiang He,Jan Vymazal,Yi Chen
Ammonia-oxidizing microorganisms (AOMs, archaea (AOA) and bacteria (AOB)) are primarily responsible for the ammoxidation in constructed wetlands (CWs). However, little is known about evaluating the response of AOA and AOB to engineered nanomaterials (ENMs) and quantifying the shift of their contribution to ammoxidation. Herein, we operated a series of CWs exposing to silver nanoparticles (Ag-NPs), single-walled carbon nanotubes (SWCNTs), and polystyrene nano-sized plastics (PS-NPs) with the wastewater-accumulating concentration of ENMs for 180 days. The results showed that the abundance of AOA amo A gene in situ was far lower than that of AOB, while the abundance ratio of AOA to AOB increased by 15 folds after 180-day experiment. Using DNA stable isotope probing (DNA-SIP) experiment, we found that the active AOB microbiota varied substantially but the AOA was more stable across different groups. Furthermore, the co-occurrence analysis proved that ENMs stress increased the negative coexistence pattern of AOA and AOB; predictive functional profiling showed that the ENMs enhanced the functional advantage of AOA by inhibiting AOB (mainly hydroxylamine oxidation process). Finally, the contribution of AOA increased under exposing to SWCNTs (18.35%), PS-NPs (24.92%), and Ag-NPs (32.14%) compared with control group (0.03%) for 180 days. Despite this, AOB was still the primary executant of ammoxidation in CWs. Overall, in our study, the differences in activities and contributions of AOMs were quantified in CWs, and a significantly negative coexistence relationship between AOA and AOB was revealed when exposed to emerging nanomaterials.
✓ 已验证
DOI
高影响因子
Nano Materials Science
·
2023
·
IF 9.9
Ying Gao,Peng Ju,Yu Zhang,Yuxin Zhang,Xiaofan Zhai,Jizhou Duan,Baorong Hou
Since the catalytic activity of most nanozymes is still far lower than the corresponding natural enzymes, there is urgent need to discover novel highly efficient enzyme-like materials. In this work, Co 3 V 2 O 8 with hollow hexagonal prismatic pencil structures were prepared as novel artificial enzyme mimics. They were then decorated by photo-depositing Ag nanoparticles (Ag NPs) on the surface to further improve its catalytic activities. The Ag NPs decorated Co 3 V 2 O 8 (ACVPs) showed both excellent oxidase- and peroxidase-like catalytic activities. They can oxidize the colorless 3,3’,5,5’-tetramethylbenzidine rapidly to induce a blue change. The enhanced enzyme mimetic activities can be attributed to the surface plasma resonance (SPR) effect of Ag NPs as well as the synergistic catalytic effect between Ag NPs and Co 3 V 2 O 8 , accelerating electron transfer and promoting the catalytic process. ACVPs were applied in constructing a colorimetric sensor, validating the occurrence of the Fenton reaction, and disinfection, presenting favorable catalytic performance. The enzyme-like catalytic mechanism was studied, indicating the chief role of ⋅O 2 - radicals in the catalytic process. This work not only discovers a novel functional material with double enzyme mimetic activity but also provides a new insight into exploiting artificial enzyme mimics with highly efficient catalytic ability.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Polymer Materials
·
2023
·
IF 5
Yanyan Wang,Shuaishuai Liu,Chao Xiao,Miao Jiang,Xin Ding,Hui Zhang,Kang Zheng,Lin Chen,Xingyou Tian,Xian Zhang
Polyimide (PI) films with high out-of-plane thermal conductivity are highly desirable for effectively alleviating thermal failure in advanced flexible electronics. However, it is still a great challenge to achieve high out-of-plane thermal conductivity with a low filler content by a simple method. Herein, an Ag-coated PI microsphere (PIM@Ag) as a thermally conductive filler with a considerable heat-transfer path in the out-of-plane direction is prepared to improve the out-of-plane thermal conductivity of the PI film. Because of the introduction of thermal welding between Ag nanoparticles during thermal imidization further eliminating the interface thermal resistance, the resultant PI/PIM@Ag composite film exhibits a high out-of-plane thermal conductivity of 1.2 Wm–1K–1 with an ultralow Ag content of 6.08 wt % and a superior tensile strength of 124.0 MPa compared to 78.9 MPa of a pure PI film. Practical application and comsol simulation results verify that the PI/PIM@Ag composite film has excellent heat dissipation ability for a chip. This work provides an idea for improving the out-of-plane thermal conductivity of polymers with low filler contents.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF CATALYSIS
·
2023
·
IF 7.3
Guorui Liu,Rong Cai,Zhenli Lv,Guorui Ma,Jing Li,Jun Jin,Xin Zhong,Feng Li
Low light absorption efficiency and short carrier diffusion length mainly restrict the use of CuBi 2 O 4 as a photocathode for an efficient photoelectrocatalytic CO 2 reduction reaction (PEC-CO 2 RR). These inadequacies are alleviated by fabricating CuBi 2 O 4 inverse opal photocathode modify with plasmonic Ag nanoparticles (CuBi 2 O 4 IOs-Ag) by using a sacrificing template method. The CuBi 2 O 4 IOs-Ag photocathode exhibits superior PEC-CO 2 RR-to-CO performance with a Faraday efficiency (FE) of 92% at 0.2 V versus reversible hydrogen electrode, and this value is roughly 1.6 times that of the pristine CuBi 2 O 4 thin film. Detail characterization and experiments reveal that the exceptional three-dimensional (3D) order structure simultaneously accelerates the mass transfer rates and enhances the light-harvesting efficiency. In addition, the introduction of Ag nanoparticles remarkably improves the surface charge distribution by forming an ohmic contact with CuBi 2 O 4 . Consequently, carrier recombination is efficiently inhibited, and the carrier dynamics behavior is improved. This work provides important insights into the design of high-performance photoelectrocatalytic systems for CO 2 reduction by engineering the microstructure of catalysts with localized surface plasmon resonance effect.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2023
·
IF 9.5
Dongzhen Chen,Jianzhao Gao,Dan He,Jingshun He,Yang Li,Meng Zhang,Wenya Li,Xin Chen,Xinhai He,Tao Fu
Wearable, noninvasive, and simultaneous sensing of subtle strains and eccrine molecules on human body is essential for future health monitoring and personalized medicine. However, there is a huge chasm between biomechanics and bio/chemical molecule detections. Here, a wearable plasmonic bridge sensor with multiple abilities to monitor subtle strains and molecules is developed. Hollow Au–Ag nano-rambutans and carbon nanotubes (CNTs) are adsorbed in the nonwoven fabrics (NWFs) conjointly, where the gap between the conducting network of CNTs is bridged by the Au–Ag nano-rambutans during the subtle strain sensing, and the detection sensitivity for stress is improved at least 1 order of magnitude compared to that with the only CNTs. In order to acquire the accurate human action recognition, a machine learning algorithm (support vector machines) based on output biomechanics data is designed. The average accuracy of our plasmonic bridge sensor reaches 89.0% for human action recognition. Moreover, due to the hollow structure and high nanoroughness, the single Au–Ag nano-rambutan particle has strong localized surface plasmon resonance effect and high surface-enhanced Raman scattering (SERS) activity. Based on their unique SERS spectra introduced by the hollow Au–Ag nano-rambutan adsorbed in the NWFs, noninvasive extraction and “fingerprint” recognition of bio/chemical molecules could be realized during the wearable sensing. In sum, the NWFs/CNTs/Au–Ag sensor bridges the barrier between the bodily strain detection and molecule recognition during the wearable sensing. Such integrated and multifunctional sensing strategy for universal biomechanics and bio/chemical molecules means to assess human health to be of importance.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING RESEARCH & DESIGN
·
2023
·
IF 3.9
Wanyi Tao,Bo Zhang,Luxia Yin,Xiao Teng,Zhang Wen,Zekai Zhang,Wensheng Ning
Fabrication of adsorbent can play an important role in the adsorption desulfurization technology as a most promising deeply desulfurization technology. Ag 2 O/CeO 2 /SiO 2 aerogel composites were synthesized, where the easy oxidation of Ce 3+ into Ce 4+ was realized by adding hydrogen peroxide, and were utilized to remove thiophenics from model fuels and aromatics. Compared with Ag 2 O/SiO 2 and CeO 2 /SiO 2 , the adsorption uptake and solvent washing regeneration performance of Ag 2 O/CeO 2 /SiO 2 for thiophene was obviously enhanced, and the adsorption selectivity for thiophene in the presence of aromatics was relatively close to CeO 2 /SiO 2 , attributed to that Ag 2 O/CeO 2 /SiO 2 adsorbed thiophenics via the π-Ag + complexation and S-Ce bonding, where the latter was main interaction. However, there was no synergistic interaction between Ag and Ce species acted as adsorption sites in the Ag 2 O/CeO 2 /SiO 2 , which could be supported by that the chemical state of Ag and Ce in Ag 2 O/CeO 2 /SiO 2 was consistent with corresponding one in Ag 2 O/SiO 2 and CeO 2 /SiO 2 , respectively. Among Ag 2 O/CeO 2 /SiO 2 aerogel composites with different molar ratios of Si/Ce, Ag 2 O/CeO 2 /SiO 2 -50 performed the best, its adsorption uptake for thiophene, benzothiophene and dibenzothiophene from model fuels arrived at 20.4, 21.8 and 27.2 mg-S/g ads , respectively. Langmuir and Freundlich adsorption isotherm models, the pseudo-second-order kinetic model could well describe the adsorption of thiophenics over Ag 2 O/CeO 2 /SiO 2 -50.
✓ 已验证
产品关联
DOI
高影响因子
Materials Chemistry Frontiers
·
2023
·Vol. 7
·期 6
·1100-1109
·
IF 7
Suyang Li,Junjie Chen,Wanbing Xu,Biao Sun,Jiechen Wu,Qiang Chen,Pei Liang
Bimetallic gold core–silver shell (Au@Ag) surface-enhanced Raman scattering tags draw broad interest in the fields of biological and environmental analyses. Herein, an efficient hybrid microfluidic chip was designed to prepare uniform Au@Ag core–shell nanoparticles, and DTNB was used as the internal standard tag molecule to prepare Au@DTNB@Ag for SERS detection. Homogeneous core–shell nanoparticles with a particle size of 90 nm were prepared by mixing a silver precursor and a gold core in a microfluidic chip. The relative standard deviation (RSD) of the particle size distribution was close to 10%, and the detection limit of 4-MBA was as low as 10-10 M. In order to solve the influence of SERS signal fluctuation, a uniform Au@DTNB@Ag core–molecule–shell structure was synthesized in a microfluidic chip, and the characteristic peak of the analyte was corrected by the relative intensity of the DTNB characteristic peak (1335 cm−1). The experimental results showed that the SERS detection was achieved with high reproducibility, and the SERS peak intensity had a good linear correlation with the concentration. The homogeneous SERS substrate prepared using a microfluidic chip has potential for sensitive and reliable detection of environmental chemical contaminants.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF FOOD AND DRUG ANALYSIS
·
2022
·
IF 6.157
Wenwen Chen,Qiang Chen,Wei Zhang,De Zhang,Zhi Yu,Ying Song,Xiubing Zhang,Dejiang Ni,Pei Liang
The problem of aflatoxin contamination emerged gradually in the field of food safety. Surface-enhanced Raman spectroscopy (SERS) is an ultra-sensitive and non-destructive spectroscopy technology with extensive application prospects in the detection field. In this paper, with the detection of AFB1 as the target, Au@Ag NPs substrate with uniform morphology and strong SERS effect was prepared. Furthermore, the intermediates formed by hydrogen bonding between AFB1 and melamine facilitate the binding of toxin molecules to the substrate. Moreover, the AFB1-melamine-Au@Ag NPs detection system was established by optimizing the melamine dosage, and the limit of detection can reach 10 −8 mol/L (M). In this method, AFB1 (concentration range of 10 −4 M – 10 −7 M) in tea oil, the Raman signal intensity of AFB1 shows an excellent linear, logarithmic relationship, and the correlation coefficient is 0.9685. Therefore, this work has achieved simple, sensitive, and stable AFB1 detection and has broad application potential in food safety detection.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CARBOHYDRATE POLYMERS
·
2023
·
IF 11.2
Feng Xiao,Yewen Xiao,Wei Ji,Linlin Li,Yimeng Zhang,Minmin Chen,Hualin Wang
Ethylene (C 2 H 4 ) and pathogenic microorganisms are the two major causes of the deterioration of postharvest fruits and vegetables (F&V). Hence, the development of active packaging with C 2 H 4 scavenging and bactericidal activities is urgently desirable. Herein, a novel photocatalytic active film (CS-PC-AC) is developed for banana preservation by incorporating WO 3 /AgBr/Ag photocatalyst (PC) and activated carbon (AC) into chitosan (CS). The fabricated PC is a ternary Z -scheme heterojunction and its high photocatalytic activity is achieved by the bridge of Ag between WO 3 and AgBr through rapid transfer and separation of photogenerated electrons and holes. AC plays an indispensable role in the photocatalytic reaction through molecule adsorption and transport. PC and AC are hydrogen bonded with chitosan and their incorporation has slight effect on film's thermal stability but decreases the film's mechanical and barrier properties to some extent. CS-PC-AC exhibits strong bactericidal activity (killing ~100 % of Escherichia coli and Staphylococcus aureus within 3 h) and good C 2 H 4 scavenging activity (C 2 H 4 scavenging rate of 49 ± 2 %) under visible light irradiation , which can extend the banana shelf-life by at least 50 % at 25 °C. These results indicate the good perspective of CS-PC-AC in the delay of the deterioration of postharvest F&V.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Materials Today Energy
·
2023
·
IF 9.3
Jian Wang,Yifan Liu,Guilu Qin,BaoShan Wu,Zongkai Yan,Nasir Mahmood,Xian Jian,Huakun Liu
The low intrinsic conductivity of carbon monofluoride (CF x ) extremely limits the high-power application of lithium/carbon monofluoride (Li/CF x ) primary batteries. Herein, silver nanowires were grown in situ on the surface of CF x material by an aldehyde reduction method in polyhydric alcohol. The interface interaction between silver nanowires (Ag NWs) and the surface of CF x material was studied. Ag NWs@CF x hybrids modulate the electronic structure of CF x and enhance the electrochemical activity of C–F bonds, thus increasing the availability of F atoms to participate in the discharge reaction. The electrochemical performance results show that the voltage platform, specific capacity, and energy density of the Li/CF x batteries were enhanced with a certain concentration of Ag NWs on the CF x surface. The 10% Ag NWs@CF x sample achieved a power density of 10376.09 W/kg and an energy density of 840 Wh/Kg at a discharge rate of 8C, which is significantly better than the pristine CF x . The performance of Li/CF x batteries is improved by building an Ag conductivity chain and enhancing the electrochemical activity of C–F bonds through a simple hydrothermal method , which effectively expands the application prospects of Li/CF x batteries in the field of high-power devices.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2023
·Vol. 34
·期 24
·1-19
·
IF 2.8
Chen Haixue,Wang Xinyue,Zeng Zejun,Zhang Guoqi,Zhang Jing,Liu Pan
With the development of electronic technology towards high power, miniaturization, and system integration, power electronic packaging is facing increasing challenges, especially for die attachment. This research aims to explore silver-coated copper (Cu@Ag) paste with sufficient mechanical properties and high-temperature reliability, as an alternative solution for silver sintering with lower cost. Firstly, micro-Cu@Ag sintering pastes were investigated under four kinds of polyol-based solvent systems and two types of particle morphologies, which included sphere-type (SCu@Ag) and flake-type (FCu@Ag). Sintering performance and microstructural evolution were compared and analyzed. Notably, sintered joints employing the terpineol–polyethylene glycol solvent system and flake-type morphology displayed a denser microstructure in comparison to SCu@Ag joints. Its bonding strength reached 36.15 MPa, which was approximately 20% higher than SCu@Ag joints. Subsequently, the influence of key sintering process parameters on Cu@Ag joints was analyzed, including sintering temperature, pressure and time. Additionally, high-temperature aging and thermal cycling tests were conducted on the optimized Cu@Ag joints to assess their reliability. Finally, the micromechanical properties of Cu@Ag joints before and after high-temperature aging were further evaluated by nanoindentation including creep properties. The elastoplastic constitutive models of Cu@Ag sintered materials with different particle morphologies were constructed, providing valuable insights for reliability evaluation. The results indicated that FCu@Ag joints exhibited satisfactory creep resistance and high-temperature reliability. In conclusion, the FCu@Ag micro-paste based on the terpineol–polyethylene glycol solvent system proposed in this study demonstrated sufficient bonding strength, high reliability, and adequate mechanical properties as an attractive solution for high-temperature power electronics packaging.
✓ 已验证
产品关联
DOI
高影响因子
International Journal of Electrochemical Science
·
2023
·
IF 1.5
Yao Wang,Dan Li,Junfeng Kang,Shiye Guan,Daoxin Wu
In this work, graphene (GR) and Ag-ZnO nanocomposites were prepared and used together with methylene blue (MB) as electrode materials to modify a glassy carbon electrode (GCE). The electrochemical behavior of L-tryptophan (L-Trp) on the fabricated MB/Ag-ZnO/GR/GCE was investigated by cyclic voltammetry and differential pulse voltammetry. MB/Ag-ZnO/GR clearly enhanced the electrochemical oxidation of L-Trp. In a 0.1 mol/L phosphate buffer solution at pH 4.0, the peak current response at the modified electrode increased linearly with an increase in the L-Trp concentration from 2.0 x 10 -6 to 1.4 x 10 -4 mol/L, and the detection limit (S/N = 3) was 1.0 × 10 -6 mol/L. The electrode showed good reproducibility, stability, and selectivity. The sensor was used for the determination of L-Trp in biofluid samples (pig serum and pig urine), and the recovery rate ranged from 97.1% to 104.2%. The fabricated electrode was proposed for the electrochemical analysis of L- Trp, indicating the potential for practical applications in the biological field.
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）