文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第2953至2964个,产品总数11,257个

切换升序
Co)
ACS Applied Materials & Interfaces · 2021 · IF 9.229

Synergistically Optimized Electron and Phonon Transport of Polycrystalline BiCuSeO via Pb and Yb Co-Doping

Zhanxiang Yin,Zhongyuan Liu,Yuan Yu,Cunyin Zhang,Peng Chen,Jianxun Zhao,Pan He,Xin Guo

Polycrystalline BiCuSeO is considered as a promising thermoelectric material due to its intrinsically low thermal conductivity and moderate Seebeck coefficient. However, its low electrical conductivity and coupled electron–phonon transport properties restrict the further improvement of the thermoelectric performance. In this work, Pb and Yb dopants are incorporated into BiCuSeO to substitute for Bi sites via ball milling and high-pressure and high-temperature sintering, leading to a synergistic optimization of the electron and phonon transport and improved thermoelectric performance. The carrier concentration exhibits an enhancement with increasing Pb&Yb co-doping contents. Meanwhile, the decreased carrier mobility is suppressed appropriately by coordinating with the interplay of Pb and Yb dopants on the electronic structure. Besides, Pb&Yb co-doping combined with high-pressure and high-temperature sintering introduces abundant grain boundaries, dislocations, and point defects to effectively decrease the lattice thermal conductivity by scattering phonons in a broad frequency range. Coupled with the synergistic optimization of the electrical and thermal properties, a maximum zT of 1.2 is achieved in Bi0.88Pb0.06Yb0.06CuSeO at 850 K, which significantly outperforms the majority of oxygen-containing thermoelectric materials. Our study suggests that dual doping of bivalent ions and rare-earth elements at Bi sites is an effective strategy for improving the thermoelectric performance of BiCuSeO.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF CATALYSIS · 2022 · IF 8.047

Activity enhancement of ceria-supported Co-Mo bimetallic catalysts by tuning reducibility and metal enrichment

Biyun Fang,Zeliang Qi,Fangming Liu,Chuanfeng Zhang,Chunyan Li,Jun Ni,Jianxin Lin,Bingyu Lin,Lilong Jiang

The development of efficient oxides-supported bimetallic catalysts is critical for ammonia synthesis or other catalytic reactions. Herein, the design of ceria-supported Co-Mo bimetallic catalysts with different properties is performed by changing Mo addition to enhance the ammonia synthesis activities. It is found that the reduction of ceria and molybdenum oxide would be boosted by Co species, but the reduction of the bimetallic catalyst would be inhibited by the aggregated molybdenum oxide for the catalyst with Co and Mo simultaneous addition. On the contrary, this ill effect of molybdenum oxide on the reduction of the bimetallic catalyst can be effectively alleviated by the subsequent addition of Mo species to ceria-supported Co catalyst, resulting in enhancement of the proportion of Co metal, Ce 3+ and low-valent Mo species, as well as surface enrichment of Co species. In such cases, the amount of the adsorbed hydrogen and nitrogen species would increase, and hydrogen species preferentially desorbs following a pathway of H 2 formation. As a result, the catalyst obtained by the separate addition of Co and Mo shows 2.5-fold more active than its counterpart with the simultaneous addition of Co and Mo species. These findings provide a valuable insight in designing reducible oxide-supported bimetallic catalysts in ammonia synthesis or other hydrogen-involved reactions.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
ACS Catalysis · 2024 · IF 11.3

Toward High CO Selectivity and Oxidation Resistance Solid Oxide Electrolysis Cell with High-Entropy Alloy

Jun Tong,Na Ni,Baowen Zhou,Chongqing Yang,Kolan Madhav Reddy,Hengyong Tu,Yusi Liu,Zhe Tan,Longkai Xiang,Haozhen Li,Xing Zhou,Yunyi Zhang,Yixin Li,Hanchao Zhang,Lei Zhu,Zhen Huang

Ni-based cermet materials still persist as pronounced challenges for electrocatalysts in solid oxide electrolysis cells (SOECs), due to their insufficient CO2 catalytic efficiency and inferior resistance to oxidation. In this paper, a (Fe,Co,Ni,Cu,Mo) quinary high-entropy alloy is explored as an alternative cathode material, offering enhanced performance in the co-electrolysis of H2O and CO2 for renewable syngas production. In comparison to traditional nickel-based cathodes, an assembled SOEC employing the as-designed quinary high-entropy alloy exhibits a remarkable increase in CO2 conversion capacity and significantly enhanced oxidation resistance. In addition, the electrolysis current density increases by 18%, and a stability test for more than 110 h reveals no degradation. Moreover, the stability can be maintained for up to 40 h even without any protective gas. Morphological and spectroscopic analyses, coupled with density functional theory (DFT) calculations, elucidate that the high-entropy effect facilitates surface electron redistribution, which in turn contributes to the measurable activity by reducing the energy barrier of CO2 activation. Notably, the superior resistance to oxidation primarily originates from the in situ-formed spinel phase under oxidation conditions. This study demonstrates the satisfying performance of high-entropy alloys as cathode materials in SOEC, validating their high application potential in this field.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
ACS Applied Nano Materials · 2021 · IF 5.097

Selective Photothermal Reduction of CO2 to CO over Ni-Nanoparticle/N-Doped CeO2 Nanocomposite Catalysts

Zewei Jia,Shangbo Ning,Yuxin Tong,Xin Chen,Huilin Hu,Lequan Liu,Jinhua Ye,Defa Wang

Photothermal reverse water gas shift reaction is one of the promising methods to palliate global energy and environmental issues. Searching for catalysts with high activity and CO selectivity for CO2 conversion has been attracting extensive attention. In this work, Ni nanoparticle-loaded N-doped CeO2 (Ni/N-CeO2) composite catalysts were synthesized using a three-step method. Under light irradiation, the optimal Ni/N5.0-CeO2 exhibited a CO yield rate of 20.9 mmol·gcat–1·h–1 with almost 100% of CO selectivity via photothermal CO2 reduction. As a comparison, Ni/CeO2, without nitrogen doping, showed a high CH4 selectivity. The strong light absorption of Ni/N5.0-CeO2 mainly by loading of Ni nanoparticles and the enhanced adsorption/activation of CO2 molecules due to increased oxygen vacancies in N5.0-CeO2 by N-doping were supposed to account for the excellent catalytic performances. The doping of nitrogen was of particular importance for the formation of N–H bonds, which could modulate the reaction pathway for promoting the reduction of CO2 toward CO while suppressing the undesirable CO2 methanation process.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF COLLOID AND INTERFACE SCIENCE · 2020 · IF 7.489

Highly selective and active Cu-In2O3/C nanocomposite for electrocatalytic reduction of CO2 to CO

Yanzhu Ye,Ying Liu,Zhongshui Li,Xiaohuan Zou,Hui Wu,Shen Lin

The Cu-In 2 O 3 /C nanocomposite was prepared by a simple solid-phase reduction method. The introduction of In 2 O 3 into Cu/C to form the Cu-In 2 O 3 /C nanocomposite evidently enhances the electrocatalytic activity for the selective reduction of CO 2 to CO. Specifically, the Cu-In 2 O 3 /C nanocomposite exhibits higher Faraday efficiency ( FE  = 86.7%) at −0.48 V vs. the reversible hydrogen electrode (RHE) in the electrocatalytic reduction of CO 2 to CO and larger current densities (55 mA cm −2 ) under a low overpotential (−1.08 V vs. RHE). These indicate its superior performance over many of the reported Cu-based catalysts [1] , [2] , [3] , [4] . It was also found that by rationally adjusting the applied potential, tunable syngas can be formed, which can be used to synthesize formic acid, methyl ether, methanol, synthetic fuels, or other bulk chemicals through appropriate industrial processes. Furthermore, the Cu-In 2 O 3 /C nanocomposite maintains good stability in the electrocatalytic reduction of CO 2 . This work demonstrates a novel strategy to convert CO 2 into desired products with high energy efficiency and large current density under low overpotential by the rational designing of non-precious metal catalysts.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
PHYSICAL CHEMISTRY CHEMICAL PHYSICS · 2022 ·Vol. 24 ·期 18 ·10838-10850 · IF 3.945

Partially delocalized charge in crystalline Co–S–Se/NiOx nanocomposites for boosting electrocatalytic oxygen evolution

Wei Deng,Yuping Gai,Haitao Duan,Zhide Chen,Xiaojun Hu,Sheng Han,Niwei Xu,Shanlin Qiao,Zijian Yao,Fei Jiang

Although reasonably specified and adjustable preparation of nanostructures with specific morphologies, ordered chemical compositions and electronic structures involving advanced energy chemistries is an important research area, high-efficiency, stable, and low-cost electrocatalysts for water splitting are greatly desirable and challenging. In this study, partially delocalized Co–S–Se ultra-thin nanosheets are obtained via a liquid–liquid interface-mediated strategy at an oil–water interface. These Co–S–Se ultra-thin nanosheets exhibit different-sized lamellar structures and have an average thickness of 0.83 nm. The ternary ultra-thin Co0.45S0.38Se0.17 nanosheets demonstrate excellent performance for the OER, accompanied by an overpotential of 290 mV (1.52 V vs. RHE) at 10 mA cm−2, and a Tafel slope of 74.5 mV dec−1. In the meantime, the catalyst recombined with a stoichiometry NiOx catalyst to form a composite interface, which also exhibited a good OER performance, with an overpotential of 260 mV at 10 mA cm−2 and a smaller Tafel slope of 53.9 mV dec−1. The nanosheets can rearrange the electronic density near the metal catalytic centers and increase the electron transfer. DFT calculations indicate that the partially delocalized charges can improve electrocatalytic performances, demonstrating modulated electroreduction properties. Due to the special atomic and electronic structure of the ternary transition metal alloy chalcogenide, the compound has great potential for energy storage, which will help in the rational design and synthesis of high-efficiency electrocatalysts.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
FOOD RESEARCH INTERNATIONAL · 2020 · IF 4.972

Outstanding antioxidant pickering high internal phase emulsions by co-assembled polyphenol-soy β-conglycinin nanoparticles

Li-Ping Peng,Chuan-He Tang

This work reports a kind of novel antioxidant Pickering high internal phase emulsions (HIPEs; with an oil fraction, ϕ  > 0.74) stabilized by soy β -conglycinin ( β -CG) and polyphenol complex nanoparticles, as outstanding protective containers for lipophilic nutraceuticals. The nanoparticles with a representative polyphenol ((-)-epigallocatechin-3-gallate; EGCG) encapsulated were fabricated through an ethanol-mediated dissociation and re-assembly process of β -CG, with greater particle size and higher surface hydrophilicity observed at higher initial EGCG concentrations. Using these co-assembled nanoparticles as sole stabilizers, a kind of HIPE gels with similar gel stiffness and microstructure, could be easily fabricated at ϕ  = 0.8 and a protein concentration in the aqueous phase of 1.0 wt% using polyunsatuated fatty acid-rich flaxseed oil as the dispersed phase. These HIPE gels were extraordinarily stable against heating or long-term storage, but susceptible to freeze-thawing. The as-fabricated HIPEs showed an excellent protection to β -carotene (encapsulated in oil phase) against heating, as well as an inhibition of lipid oxidation. The oxidation protection was in an EGCG concentration dependent manner. The results would be of interest for providing a novel strategy to fabricate functionalized Pickering HIPEs as potential containers or delivery systems for lipophilic nutraceuticals.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
APPLIED CATALYSIS B-ENVIRONMENTAL · 2020 · IF 16.683

BiVO4 /Bi4Ti3O12 heterojunction enabling efficient photocatalytic reduction of CO2 with H2O to CH3OH and CO

Xianying Wang,Yingshu Wang,Meichao Gao,Jinni Shen,Xipeng Pu,Zizhong Zhang,Huaxiang Lin,Xuxu Wang

Construction of composite semiconductors is an effective solution to elevate the efficiency of photocatalysis by prolonging lifetime of photogenerated hole and electrons. Herein, a heterojunction structure composite BiVO 4 /Bi 4 Ti 3 O 12 was synthesized via a facile in situ hydrothermal condition. The novel composite photocatalyst has excellent photocatalytic ability to reduce CO 2 with H 2 O into CH 3 OH and CO. The BiVO 4 /10 % Bi 4 Ti 3 O 12 sample shows the highest yields of CH 3 OH and CO up to 16.6 and 13.29 μmol g −1  h −1 , which was 12.39 and 5.68 times higher than that of pure BiVO 4 , and 9.88 and 2.80 times higher than that of pure Bi 4 Ti 3 O 12 , respectively. Such a high activity is attributed to the type II heterojunction structure which significantly enhances separation of photogenerated carriers and promotes collaboration between the water oxidation on the Bi 4 Ti 3 O 12 and the CO 2 reduction on BiVO 4 . The photocatalytic reaction mechanism of CO 2 on the composite was proposed according to experiment results.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION · 2022 · IF 7.926

Co-hydrothermal dechlorination of PVC plastic and bagasse: Hydrochar combustion characteristics and gas emission behavior

Zhuang Liu,Dachao Ma,Liwu Liang,Xuan Hu,Mengxue Ling,Zhou Zhou,Lizhong Fu,Zheng Liu,Qingge Feng

Hydrothermal treatment (HTT) of polyvinyl chloride (PVC) can efficiently remove chlorine (Cl) to produce low Cl hydrochar for solid fuel. This work performed co-hydrothermal treatment of PVC recycled plastics (PVC R ) with biomass, then tried to reveal the combustion behavior and Cl migration behavior during combustion of PVC-derived hydrochar . It is shown that the hydrothermal temperature was the dominant factor affecting the degradation and dechlorination of PVC R . Treated at 220 ℃ for 60 min, the dechlorination efficiency of PVC R was 4.88 wt% and it was significantly increased to 34.09 wt%, 28.60 wt% and 32.50 wt% when PVC R was co-treated with bagasse, bagasse + high impact polystyrene (HIPS) and bagasse +  acrylonitrile butadiene styrene (ABS), respectively. The substitution of Cl by hydroxyl (-OH) and elimination were two main dechlorination pathways. Bagasse could provide abundant -OH so as to promote the dechlorination of PVC R . Interestingly, in the combustion of PVC R and hydrochars, the Cl was mainly released in the form of HCl at lower temperature combustion stage but C-Cl mostly emitted at higher temperature combustion stage . The emitted Cl species strongly depends on the Cl content in hydrochar and combustion temperature , but did not show relevance to the existence form of Cl in hydrochar. Hydrothermal dechlorination could sharply reduce HCl emission.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Journal of Energy Chemistry · 2023 · IF 13.1

Efficient and stable PtFe alloy catalyst for electrocatalytic methanol oxidation with high resistance to CO

Qian Yang,Sifan Zhang,Fengshun Wu,Lihua Zhu,Guang Li,Mingzhi Chen,An Pei,Yingliang Feng

Direct methanol fuel cells (DMFC) are widely considered to be an ideal green energy conversion device but their widespread applications are limited by the high price of the Pt-based catalysts and the instability in terms of surface CO toxicity in long-term operation. Herein, the PtFe alloy nanoparticles (NPs) with small particle size (∼4.12 nm) supported on carbon black catalysts with different Pt/Fe atomic ratios (Pt 1 Fe 2 /C, Pt 3 Fe 4 /C, Pt 1 Fe 1 /C, and Pt 2 Fe 1 /C) are successfully prepared for enhanced anti-CO poisoning during methanol oxidation reaction (MOR). The optimal atomic ratio of Pt/Fe for the MOR is 1:2, and the mass activity of Pt 1 Fe 2 /C (5.40 A mg −1 Pt ) is 13.5 times higher than that of conventional commercial Pt/C (Pt/C-JM) (0.40 A mg −1 Pt ). The introduction of Fe into the Pt lattice forms the PtFe alloy phase, and the electron density of Pt is reduced after forming the PtFe alloy. In-situ Fourier transform infrared results indicate that the addition of oxyphilic metal Fe has reduced the adsorption of reactant molecules on Pt during the MOR. The doping of Fe atoms helps to desorb toxic intermediates and regenerate Pt active sites, promoting the cleavage of C–O bonds with good selectivity of CO 2 (58.1%). Moreover, the Pt 1 Fe 2 /C catalyst exhibits higher CO tolerance, methanol electrooxidation activity, and long-term stability than other Pt x Fe y /C catalysts.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
INORGANIC CHEMISTRY COMMUNICATIONS · 2021 · IF 2.495

Co/MoS2 nanocomposite catalyzed H2 evolution upon dimethylamine-borane hydrolysis and in situ tandem reaction

Junjie Zhou,Xu Meng,Jiaying Yan,Xiang Liu

Since dimethylamine-borane ($ 463/kg) is much cheaper than ammonia borane ($ 13,921/kg), the hydrolysis of dimethylamine-borane catalyzed by transition metal nanocatalysts has long been proposed as a viable opportunity for hydrogen evolution, but it often required noble metals nanocomposites, such as Pt, Rh and Ru. Herein, we first report the ultrafine non-noble metal nanoparticles supported on MoS 2 nanosheet (including Fe/MoS 2 , Co/MoS 2 , Ni/MoS 2 and Cu/MoS 2 ) for the H 2 evolution from hydrolysis of dimethyl amine-borane (DMAB). Among them, Co/MoS 2 is found to be more efficient than others for the H 2 evolution, with the TOF of 374 mol (H2) •mol cat −1 •h −1 . Kinetic isotopic experiment and the tandem reaction have confirmed that H 2 evolution by using H atoms in water.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
ELECTROCHIMICA ACTA · 2016 · IF 4.803

Nitrogen and gold nanoparticles co-doped carbon nanofiber hierarchical structures for efficient hydrogen evolution reactions

Ming Zhang,ShuaiShuai Wang,Tao Li,JiaDong Chen,Han Zhu,MingLiang Du

A novel hierarchical structure was fabricated by integrating gold nanoparticles (AuNPs) on nitrogen-doped carbon nanorods encapsulating carbon nanofibers (AuNPs@NCNRs/CNFs), and the composite was demonstrated as an electrocatalyst for the hydrogen evolution reaction (HER). First, polyaniline nanorods (PNRs) were grown on the surfaces of the CNFs, and the PNR/CNF hybrids were then decorated with small, well-dispersed and size-controlled AuNPs. The morphology, structure and chemical states of the AuNPs@NCNRs/CNFs hybrids were characterized by field emission scanning electron microscope (FE-SEM), transmission electron microscope (TEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). The AuNPs@NCNRs/CNFs can be used directly as an electrode and exhibit good HER activity with a relatively low onset potential of 126   mV, a Tafel slope of 93   mV   dec −1 and remarkable durability in 0.5   M H 2 SO 4 . The enhancement of the HER activity could be attributed to the synergetic effect between the nitrogen-doped carbon fibers and the AuNPs.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。