文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第2965至2976个,产品总数347,389个

切换升序
REACTIVE & FUNCTIONAL POLYMERS · 2026 · IF 5.4

Sustainable 5-HMF to benzimidazole/furan-contained epoxy resins: Structural design and performance upgrade

Xingyu Hu,Zhiyong Li,Xiaoge Li,Xiangyan Ji,Jingjing Meng

A highly conjugated biobased liquid HPE monomer was fabricated from HMF. • The benzimidazole motif HPE contributes to a relatively mild curing behavior. • The HPE endows the resin with favorable mechanical properties and dimensional stability. • The HPE networks showed good solvent resistance and shape memory. • This strategy provided a tractable biocomposite fabrication. A novel bio-based epoxy monomer (HPE) bearing a rigid benzimidazole-furan skeleton was synthesized from 5-hydroxymethylfurfural (5-HMF). The activation energy for HPE-derived networks was relatively lower than that of the DGEBA counterparts, indicating favorable curing conditions. The cured HPE-thermosets exhibited exceptional mechanical properties. For instance, HPE/APB achieved good tensile strength (105.67 ± 13.43 MPa), flexural strength (125.43 ± 16.65 MPa), and impact strength (17.99 ± 1.10 kJ m −2 ). Moreover, the thermomechanical investigation also suggested its advantageous storage modulus of 3.55 GPa at 30 °C, which surpassed the petroleum-based DGEBA counterparts. Notably, HPE-networks displayed unique dimensional stability with a thermal expansion coefficient ranging from 87 to 115.4 ppm °C −1 below 200 °C. In contrast to DDM-cured thermoset, APB-cured networks also favored decreasing dielectric constant and loss. On the whole, the APB hardener outperformed the DDM in most cases. Furthermore, glass fiber-reinforced HPE composites demonstrated 90.8% peeling off in DMF under microwave-assisted conditions, making sustainable fiber recycling possible. This work provides a promising strategy for HMF-related renewable epoxy resins. Download: Download high-res image (147KB) Download: Download full-size image

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Surfaces and Interfaces · 2026 · IF 6

Interfacial Engineering of Co3O4/Fe2O3 p-n Heterojunctions for Low-Temperature n-butanol Sensing: Experimental and DFT Insights

Shiyang Fu,Yuqing Shi,Guowei Yu,Xiao Liang,Nan Gao,Jing Zhang

Co 3 O 4 /Fe 2 O 3 p–n heterojunctions were prepared hydrothermally. • CF-5 shows a 5.6-fold response at a lower optimal temperature. • DFT reveals charge redistribution enhancing n-butanol adsorption. To selectively detect volatile organic compounds at low operating temperatures are highly desirable for industrial safety and environmental monitoring. Herein, we report the high-performance n-butanol gas sensors via interfacial engineering of Co 3 O 4 /Fe 2 O 3 p–n heterojunction composites. Hierarchical architectures composed of Fe 2 O 3 nanoparticles uniformly anchored on Co 3 O 4 nanorods were synthesized through a facile hydrothermal calcination strategy. Among the prepared samples, the optimized composite delivers a markedly enhanced sensing response of 23.08 toward 100 ppm n-butanol, representing a 5.6-fold improvement compared with pristine Co 3 O 4 , and simultaneously reducing the optimal operating temperature to 110°C. The mechanism analyses reveal pronounced interfacial charge transfer from Fe 2 O 3 to Co 3 O 4 , which induces band bending and built-in potential barriers that sensitively regulate carrier transport. The formation of heterointerfaces also significantly enriches chemisorbed oxygen species, thereby accelerating surface oxidation reactions with n-butanol molecules. As a result, the sensor exhibits outstanding selectivity against common interfering gases, fast response/recovery dynamics (42/36 s). Density functional theory calculations further elucidate that the heterojunction facilitates stronger adsorption of n-butanol and its oxidation intermediates, enhanced charge transfer, and favorable electronic-state redistribution near the Fermi level. This work highlights interfacial electronic engineering as an effective strategy for developing energy-efficient and highly reliable metal-oxide gas sensors. Download: Download high-res image (237KB) Download: Download full-size image

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF ALLOYS AND COMPOUNDS · 2026 · IF 6.7

Synergistic enhancement of CsPbBr3 perovskite nanocrystals via ZnO and EPDM for stable wide-color-gamut display

Ziyang Niu,Zijun Huang,Peng Wang,Xiuquan Gu,Yulong Zhao

All-inorganic perovskite CsPbBr 3 nanocrystals (NCs) are promising for wide-color-gamut displays due to their high photoluminescence quantum yield (PLQY) and narrow emission bandwidth, yet their ionic nature renders them susceptible to degradation by moisture, heat, and mechanical stress, while surface defects induce non-radiative recombination. Herein, we propose a synergistic protection strategy combining ZnO inorganic modification with EPDM flexible polymer encapsulation. A ZnO heterojunction is constructed in situ on CsPbBr 3 NCs via a solution method, after which the modified NCs are dispersed in an EPDM matrix to fabricate flexible composite films. Structural and optical characterizations confirm that ZnO modification effectively suppresses non-radiative recombination, prolonging the average photoluminescence (PL) lifetime to 14.54 ns. XPS and DFT calculations reveal strong interfacial chemical interactions between CsPbBr 3 and ZnO, with an adsorption energy of −1.923 eV, suggesting effective surface-defect passivation. Stability tests demonstrate that after 6 days of water immersion, heating at 90 °C for 60 min, 200% mechanical stretching, and 100 h of UV irradiation, the composite retains 65%, 60%, and 80% of its initial PL intensity, respectively, showing substantially improved multidimensional stability. A white light-emitting diode fabricated using the film exhibits CIE chromaticity coordinates of (0.34, 0.32) and color gamut coverages of 121.2% NTSC and 98.2% Rec. 2020. This strategy simultaneously addresses defect passivation and environmental instability in perovskites, offering a feasible route towards commercial perovskite-based optoelectronic devices.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY · 2026 ·Vol. 46 ·期 16 ·118672 · IF 6.3

Design of stable oxide layers and heat transfer structure for SiC whiskers reinforced (Hf0.5Zr0.5)C ceramics with superior ablation resistance at 2500 °C

Xiaoyang Jiao,Anwei Xu,Changbai Long,Mingcong Qing,Fenglong Li,Kuntong Zhang,Lei Hu,Xiangdong Ding,Jun Sun

SiC whiskers (SiC w ) and Y 2 O 3 reinforced (Hf 0.5 Zr 0.5 )C ceramics are designed to realize superior oxidation and ablation resistance at 2500 °C. MoSi 2 , TaSi 2 , and SiB 6 (with varying SiC w contents) are further introduced as sintering aids and modifying components to enhance density and improve ablation resistance. The introduction of SiB 6 leads to higher oxidation and ablation resistance due to the in-situ formation of borides with high thermal conductivity. The borides and SiC jointly serve as rapid heat transfer pathways, facilitating the release and mitigation of thermal stresses during ablation. Meanwhile, an appropriate amount of SiC w serves as toughening and high-temperature self-healing phases, while Y 2 O 3 suppresses the crystalline transformation. Thus, a dense and stable oxide layer is developed during ablation. Therefore, the designed SiC w -Y 2 O 3 -SiB 6 -(Hf 0.5 Zr 0.5 )C exhibits near-zero damages under a 1050 s ablation at 2500 °C, with mass and linear ablation rates of −0.220 μm/s and −0.071 mg/(cm 2 ·s), respectively.

CAS / MDL: 12039-79-1
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
INDUSTRIAL CROPS AND PRODUCTS · 2026 · IF 6.4

Hanging time-dependent gel content evolution and its effect on strain-induced crystallization of natural rubber

Changjin Yang,Honghai Huang,Yubao Chen,Xijuan Li,Shixian Chen,Lingxue Kong,Zheng Peng,Jihua Li

Gel content of NR increases then decreases with hanging time, peaking at 3 days. • Moderate hanging time significantly enhances SIC of NR. • Gel content evolution significantly modulates SIC behavior. • A strong positive correlation exists between gel content and tensile crystallinity. Strain-induced crystallization (SIC) is a critical factor governing the mechanical properties and service performance of natural rubber (NR). Gel content evolution during the hanging process exerts a substantial regulatory effect on the SIC behavior of NR. To elucidate the relationship between hanging time-dependent gel content evolution and SIC behavior, this study systematically investigated the changes in gel content and molecular weight of raw NR over hanging periods of 0–7 days using toluene extraction and gel permeation chromatography. In situ wide-angle X-ray diffraction (WAXD) under uniaxial stretching was employed to characterize the SIC behavior of NR samples subjected to different hanging durations. The results revealed that moderate hanging (3 days) yielded the maximum gel content (26.8%), while prolonged hanging (≥5 days) led to partial scission of the gel network, decreasing the gel content to 24.0%. This microstructural evolution directly modulated the SIC behavior: NR with 3 days of hanging exhibited the highest tensile crystallinity (10.74%) at a draw ratio of 7.0. This may be attributed to gel domains acting as physical anchors that facilitate molecular chain orientation and crystal nucleation. In contrast, both shorter and longer hanging durations resulted in lower crystallinity due to insufficient molecular entanglement (short hanging) or structural degradation (long hanging). Correlation analysis further confirmed a strong positive linear relationship between gel content and tensile crystallinity (R = 0.9602), indicating that gel content is a key correlative parameter associated with SIC efficiency. This study provides a theoretical foundation for optimizing the processing parameters of NR and offers new insights into tailoring the SIC behavior and mechanical properties of NR by controlling gel content evolution during hanging. It also advances the understanding of the structure–property relationship of NR, which is of great significance for the high-performance industrial applications of NR-based materials.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
DESALINATION · 2026 · IF 9.9

Ti3C2Tx-polypyrrole composite hydrogel with hierarchical mass transfer channels for efficient salt-tolerant solar evaporation

Cheng Chen,Cunxiu Zhang,Shengyi Wang,Wanneng Yu,Yuxiu Dong,Yuezi Huang,Mingming Guo

Oxidative polymerization strengthens PPy hydrogels and optimizes evaporation enthalpy. • Ti 3 C 2 T x -PPy multilevel channels guide salt crystallization to evaporator edges. • Ti 3 C 2 T x -PPy evaporator delivers 4.63 kg m −2  h −1 , 35% higher than PPy. Solar-driven interfacial evaporation, which relies on localized photothermal conversion at the gas-liquid interface, represents an effective strategy for seawater desalination. However, continuous salt crystallization and deposition at the evaporation interface remain a critical bottleneck that limits long-term operational stability. Herein, we develop a Ti 3 C 2 T x -PPy composite hydrogel evaporator with multilevel mass-transport channels for solar seawater desalination and spatial regulation of salt crystallization. The incorporation of Ti 3 C 2 T x optimizes the internal pore network of the polypyrrole hydrogel, establishing hierarchical mass-transport pathways that promote the preferential migration of salts towards the evaporator edges, where crystallization subsequently occurs. Meanwhile, Ti 3 C 2 T x enhances the photothermal conversion capability of the system and modulates the hydrogen-bonding structure of water molecules, thereby effectively lowering the evaporation energy barrier. Under 1 sun illumination, the Ti 3 C 2 T x -PPy evaporator achieves an evaporation rate of 4.63 kg m −2  h −1 , while maintaining a clean surface and undiminished performance after 50 h of continuous operation. The evaporator also exhibits purification efficiencies exceeding 99% in hypersaline solutions, dye-contaminated wastewater and real seawater, and delivers an average daily water yield of over 25 L m −2 under natural sunlight. This work provides a promising strategy for the design of hydrogel-based solar desalination systems with high efficiency, excellent salt resistance and long-term operational stability. Download: Download high-res image (150KB) Download: Download full-size image

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
FOOD HYDROCOLLOIDS · 2026 · IF 13.8

Litsea cubeba essential oil-loaded tamarind seed polysaccharide/flaxseed gum edible coatings: Properties and ambient preservation of postharvest grapes

Wenliang Qi,Qingqing Jiang,Erihemu

Food packaging plays a crucial role in extending food shelf life and ensuring food quality and safety. However, conventional packaging materials often contribute to environmental pollution, making the development of eco-friendly, edible functional coatings an effective strategy for addressing both food preservation and sustainability concerns. In this study, a novel edible composite coating was developed using tamarind seed polysaccharide (TSP) and flaxseed gum (FG) as the film-forming matrix, with Litsea cubeba essential oil (LCEO) incorporated as an active component. Single-factor optimization identified the optimal formulation as 0.5% TSP, 0.5% FG, and 0.6% LCEO. Structural characterization revealed that TSP and FG formed a stable three-dimensional network, while LCEO was uniformly dispersed within the matrix, significantly enhancing the mechanical and barrier properties of the composite film. The optimized film exhibited excellent antioxidant activity, with DPPH and ABTS radical-scavenging rates of 79.70% and 89.77%, respectively. Furthermore, it demonstrated remarkable antibacterial and antifungal activities against Escherichia coli , Staphylococcus aureus , and Botrytis cinerea . Application tests on postharvest grapes showed that the composite coating effectively reduced weight loss, delayed fruit softening, and retarded nutrient degradation, thereby extending the shelf life of grapes under ambient storage conditions. In addition, the coating was nontoxic, edible, and fully biodegradable, fulfilling the requirements for sustainable food packaging and exhibiting considerable potential for industrial applications. These findings demonstrate that the TSP/FG/LCEO composite coating is a promising sustainable packaging material with multifunctional antioxidant and antimicrobial properties for maintaining postharvest quality and extending the shelf life of fresh produce.

CAS / MDL: 28752-68-3
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Journal of Environmental Chemical Engineering · 2026 ·Vol. 14 ·期 5 ·123929 · IF 7.5

Bromide-activated peroxymonosulfate for efficient ammonium removal: Performance, mechanism and applicability

Geng Huang,Linfeng He,Haiwen Ding,Minfeng Wang,Lukai Zhuang,Zhongmin Fang,Guoqing Huang,Xiaodan Zhao,Jing Zou

Ammonium nitrogen (NH 4 + −N) pollution represents a considerable risk to both aquatic ecosystems and public health, necessitating efficient and sustainable treatment methods. In this study, bromide ion (Br − ) commonly present in wastewater was employed as an activator for peroxymonosulfate (PMS) to markedly enhance NH 4 + –N removal. NH 4 + –N elimination by Br − /PMS system followed the pseudo -zero-order kinetics, and the observed rate constant reached 0.52 mg L −1 min −1 in the presence of 825 μM Br − at pH 8.0. Quenching experiments demonstrated that primary reactive species for NH 4 + −N removal in Br − /PMS system was hypobromous acid (HBrO), rather than Br • , Br 2 •− , 1 O 2 , • OH and SO 4 •− . HBrO was primarily generated through the direct reaction of PMS and Br − . Notably, the primary product of NH 4 + –N elimination was the environmentally friendly gas N 2 (about 86%) in Br − /PMS system. Increasing Br − and PMS concentrations was advantageous for increasing NH 4 + –N elimination rate. Common anions in water (e.g., SO 4 2− , NO 3 − , and PO 4 3− ) and natural organic matter (e.g., humic acid) exhibited negligible effects on removing NH 4 + –N in Br − /PMS system, while Cl − promoted NH 4 + –N elimination. Furthermore, Br − /PMS system demonstrated exceptional performance in removing NH 4 + –N from actual aquaculture wastewater samples. To conclude, this study presented an efficient strategy to enhance the oxidative ability of PMS for NH 4 + –N elimination and highlighted its potential application in treating bromine-containing wastewater.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
FOOD HYDROCOLLOIDS · 2026 · IF 13.8

Protein-protein interactions elucidate the foaming behavior of soybean lipophilic protein: Insights from β-conglycinin, glycinin, and oil body protein-phosphatidylcholine complexes

Hanyu Song,Bingru Li,Siyu Wu,Jingwen Xu,Baokun Qi,Shizhang Yan,Lianzhou Jiang

Soybean lipophilic protein (LP) is composed of β-conglycinin (7S), glycinin (11S), and oil body protein-phosphatidylcholine (OBPs-PC), but the interactions among its components and their effects on foaming properties remain unclear. In this study, we reconstituted these components at the native LP ratio and systematically investigated the regulatory mechanism of protein-protein interactions on foaming properties. The results showed that the nature of component interactions determined foaming properties. 7S and 11S exhibited a synergistic effect: compared with the individual components, their combination underwent conformational rearrangement, characterized by decreased particle size, transition from β-sheet to random coil, increased free sulfhydryl content, reduced surface hydrophobicity, and fluorescence quenching. These changes enhanced interfacial adsorption and foam stability, making 7S + 11S exhibit the optimal foaming ability (136.44%) and stability (58.42%). In contrast, OBPs-PC, due to its strong hydrophobicity and large-sized aggregates, inhibited interfacial adsorption, causing a significant decrease in the foaming ability of OBPs-PC-containing complexes. Molecular interaction analysis indicated that hydrogen bonds and hydrophobic interactions were the main non-covalent forces driving complex formation. Rheological results confirmed that 7S + 11S foam had the highest storage modulus and the widest linear viscoelastic region. In conclusion, 7S and 11S achieved optimal foaming properties through conformational rearrangement and synergistic interfacial behavior, while the strong hydrophobicity and large-sized aggregates of OBPs-PC disrupted interfacial equilibrium and inhibited foaming. This study provides a theoretical basis for expanding the application of LP as efficient gas-water interface stabilizers and foaming agents.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
COMPOSITE STRUCTURES · 2026 · IF 7.8

Geometrically tailored 3D spacer woven fabrics for reinforcing rigid/flexible silica aerogels: mechanisms and properties

Wenqiang Xu,Shuqiang Liu,Minghan Liao,Man Zhang,Fu Li,Lu Jia,Yujing Zhang

3D spacer woven fabric overcomes silica aerogels’ poor mechanical properties. • Distinct reinforcement mechanisms revealed for rigid and flexible aerogel matrices. • Spacer density/height tunes mechanical properties and thermal insulation performance. • Synergy of matrix stiffness and fabric geometry enables balanced aerogel composites. Silica aerogels feature ultra-low thermal conductivity and ultra-lightweight characteristics, but their inherent fragility and poor mechanical performance severely restrict structural applications. This study addresses this challenge by employing three-dimensional spacer woven glass fiber fabric (GF-3D-SF) to reinforce both rigid (TEOS-based) and flexible (MTMS-based) silica aerogel matrices. The effects of fabric geometric parameters (spacer density and height) on the microstructure, mechanical properties, and thermal insulation performance of the composites were systematically investigated. Results reveal two distinct reinforcement mechanisms tailored to matrix stiffness. For rigid TEOS-based composites, strong interfacial bonding enables effective stress transfer and fiber bridging, significantly enhancing compressive/flexural strength with increased density. However, higher spacer height induces Euler buckling and thus degrades structural stability. For flexible MTMS-based composites, although weak interfacial bonding limits strength enhancement, the inherent elasticity of the matrix endows the composites with exceptional elastic recovery and cyclic fatigue resistance, which is complemented by the structural support of the 3D spacer fabric. Thermal conductivity increases with spacer density but decreases with spacer height. This work clarifies the synergy between matrix properties and fabric architecture, establishing a geometry-mediated design strategy for fabricating aerogel composites with tailored multifunctional properties.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
INDUSTRIAL CROPS AND PRODUCTS · 2026 · IF 6.4

Bio-based polyamides with designer crystallinity from oxidative upgrading of tung oil

Yongliang Ding,Bingbing Shi,Siyu Liu,Jindong Li,Fang Wu,Qingmin Yang,Yuhong Wang,Mengjie Li,Zhongkai Wang,Xiankun Wu

H 2 O 2 -assisted cleavage converts non-edible tung oil into bio-based azelaic acid for polyamide synthesis. • Programmable crystallinity transforms rigid PA69 into tough elastomers with good melt processability. • Crystallinity-engineered polyamide elastomers show strong, reprocessable adhesion on metals. Transforming non-edible plant oils into high-performance engineering polymers offers a promising route toward sustainable materials, yet remains challenged by the inefficient upgrading of structurally complex feedstocks and the difficulty of simultaneously controlling crystallinity, toughness, and processability in the resulting polymers. Tung oil, a renewable resource rich in conjugated polyunsaturated fatty acids, is particularly attractive but has been underutilized because selective conversion into well-defined monomers remains difficult. Here we report an integrated strategy that links feedstock upgrading with molecular structure programming to create bio-based polyamides with designer crystallinity. Through hydrogen peroxide-assisted oxidative cleavage, tung oil is selectively converted into high-purity azelaic acid (AA), which is subsequently copolymerized with hexamethylenediamine and poly(propylene glycol) bis(2-aminopropyl ether) (D400) to construct a family of random copolyamides (PA69 X ). The incorporation of flexible ether-containing segments disrupts chain regularity and hydrogen-bond organization, enabling precise modulation of crystalline order, melting behavior, and lamellar structure while preserving excellent thermal stability. As a result, the materials undergo a transition from rigid semicrystalline polyamides to highly tough elastomers with programmable crystallinity. The optimized copolyamide exhibits a fracture toughness of 141 MJ m −3 together with continuous melt-fiber processability, stretch-induced crystallization behavior, and robust reprocessable adhesion to metal substrates with lap shear strengths exceeding 9 MPa. This work establishes a general framework that integrates renewable feedstock valorization, crystallinity engineering, and multifunctional performance, providing a pathway for converting underutilized plant oils into sustainable engineering polymers. Download: Download high-res image (240KB) Download: Download full-size image Description: A sustainable pathway from tung oil to high-performance polyamide elastomers is established via bio-based azelaic acid, enabling programmable crystallinity, exceptional toughness, stretch-induced crystallization, and multifunctional applications in fibers and reprocessable adhesives

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2026 · IF 12.5

Life-cycle design of polyimide-based composite porous fibers and the energy storage performance of their activated derived porous carbons

Xinbin Ji,Lei Han,Yulong Xiang,Jing Guo,Fucheng Guan,Zheng Li,Yihang Zhang

Life-cycle PI porous fibers: in-service reinforcement and end-of-life upcycling. • In situ PAN-to-panof forms a rigid network that stabilizes porous PI skeletons. • CNT bridge cracks, boosting strength, hydrophobicity, and flame resistance. • KOH-activated PPC-K optimizes porosity, N/O sites, and charge transport for high C. • Symmetric supercapacitors deliver high capacitance retention over 10,000 cycles. High-temperature protective and lightweight insulating fibers are important for fire safety, extreme thermal protection, and advanced functional textiles. However, highly porous fibers generally suffer from pore-wall collapse, thermal shrinkage, insufficient mechanical support, and limited recycling routes after service. To address these issues, a full-life-cycle design strategy was proposed for polyimide (PI)-based porous fibers synergistically reinforced by polyacrylonitrile (PAN) and carbon nanotubes (CNTs). PI-based porous fibers were fabricated through wet spinning, phase separation, freeze-drying, and thermal imidization, and were further converted into PI-derived carbons by carbonization and KOH activation for supercapacitors. The ladder-like network formed from PAN after heat treatment (panof, a product of PAN pre-oxidation) and the CNT bridging structure jointly constructed a multiscale reinforced framework, endowing the PI/panof/CNT fibers with high tensile strength (22.8 MPa), strong hydrophobicity (water contact angle of 159.0°), and excellent flame retardancy (LOI = 55.2%). Moreover, the precursor structure showed a clear inheritance effect after carbonization/activation. The carbon derived from PI/panof fibers (PPC-K) achieved a favorable balance between pore structure and surface chemistry, with a specific surface area of 880.14 m 2  g −1 and a capacitance of 263.17 F g −1 at 0.5 A g −1 in a three-electrode system. Its symmetric coin-cell supercapacitor retained 91.67% capacitance after 10,000 cycles at 3 A g −1 . This work provides an integrated route from porous-fiber reinforcement to end-of-life conversion into energy-storage materials. Download: Download high-res image (551KB) Download: Download full-size image

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。