文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第2965至2976个,产品总数3,922个

切换升序
Mxene
JOURNAL OF FOOD COMPOSITION AND ANALYSIS · 2026 · IF 4.6

Molecularly imprinted electrochemical sensor based on AuNPs-nitrogen doped graphene-MXene nanocomposite for the detection of kanamycin in milk

Zhitan Huang,Tao Liu,Jiaqi Geng,Siyue Zhang,Neha,Miantai Ye,Wei Sun

Kanamycin (KANA), a broad-spectrum antibiotic, is a potential threat to the human health and environment. Therefore, it is of great significance to establish a highly sensitive and selective detection method for KANA. A novel molecularly imprinted polymers (MIPs) electrochemical sensor based on Au nanoparticles (AuNPs), nitrogen-doped graphene (NG) and MXene nanocomposite modified glassy carbon electrode (MIPs/AuNPs-MXene-NG/GCE) was developed for KANA analysis in this paper. The physicochemical performances of the nanocomposite were characterized using various techniques including SEM, TEM, XRD, XPS and electrochemsitry. The results showed that the decoration of AuNPs on MXene enhanced the conductivity and electrochemical response, the presence of MXene and NG increased the specific surface area and active sites, and the synergistic effects were favorable to the electrode performances. Under the optimal conditions, MIPs/AuNPs-MXene-NG/GCE was applied to KANA detection using differential pulse voltammetry (DPV), which achieved a wide detection range from 0.1 nmol/L to 1.0   mmol/L with a low detection limit of 0.033 nmol/L (S/N = 3). Moreover, the sensor shows excellent stability, selectivity and reproducibility, and successfully applied to the detection of KANA content in different types of milk samples with satisfactory results. The recovery was ranged from 86.0% to 113.0% with the relative standard deviation less than 4.06%. Therefore, the developed sensor provides a new idea for the efficient analysis of KANA in food samples.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
SOLAR ENERGY MATERIALS AND SOLAR CELLS · 2026 · IF 6.6

Self-dispersion and steric hindrance co-stabilized oil-based MXene nanofluids for efficient medium to high temperature photothermal conversion

Guanwang Chen,Jianxiang Zhang,Peng Su,Nianben Zheng,Zhiqiang Sun

MXene-based nanofluids exhibit outstanding broadband solar absorption capabilities in direct absorption solar collectors (DASCs); however, nanoparticle aggregation at elevated temperatures poses challenges to their practical use. To address this limitation, we develop a dual-stabilization strategy for oil-based MXene nanofluids that combines self-dispersion and steric hindrance mechanisms. This innovative approach employs hydrazine hydrate intercalation (reducing particle size) with freeze-drying-induced surface crumpling to enhance the intrinsic self-dispersion capability of MXene. Concurrently, long-chain oleylamine ligands create spatial barriers that prevent direct contact between nanoparticles. This integrated approach effectively mitigates MXene aggregation driven by van der Waals forces, as evidenced by a mere 0.14 % reduction in absorbance (765 nm) after 120 h of thermal aging at 150 °C, while maintaining the initial particle size distribution. Furthermore, the optimized nanofluid demonstrates exceptional photothermal performance, achieving a solar-weighted absorption fraction exceeding 97 % at a concentration of 60 ppm with a 3 cm path length and an equilibrium temperature of 195.6 °C under 6 sun irradiation, 44 % higher than that of the base fluid. Additionally, the system exhibits consistent photothermal stability during cycling, with relative peak temperature fluctuations remaining below 3.1 % under concentrated irradiation (4 sun and 6 sun). These results highlight the nanofluid's excellent optical absorption and thermal stability within the medium to high-temperature range of 100 °C–200 °C, implying that the proposed stabilization methodology is promising for developing durable MXene nanofluids suitable for this operational window in solar thermal applications.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
APPLIED SURFACE SCIENCE · 2026 · IF 6.6

Engineering TiO2-TiS2 heterostructure decorated on S, O-functionalized MXene as multifunctional interlayer for high-performance lithium-sulfur batteries

Shiwei Ge,Qian Zhao,Weijian Du,Weikun Jiang,Yu Liu

A TiO 2 -TiS 2 heterostructure decorated on S, O-MXene was successfully constructed. • TiO 2 -TiS 2 heterostructure mitigates MXene stacking and facilitates Li + diffusion. • The design of TiO 2 /TiS 2 ratio can balance the adsorption-catalysis trade-off. • S, O functional groups on MXene offer additional anchoring and catalytic sites. • The SM-TT interlayer enhances the cycle and rate performance of Li-S batteries. The practical application of lithium-sulfur (Li-S) batteries is impeded by polysulfides shuttling and sluggish sulfur redox kinetics. Although Ti 3 C 2 T x MXene has demonstrated great potential for polysulfides adsorption and conversion, its restacking tendency significantly diminishes its practical effectiveness. To address this critical issue, we designed and fabricated a TiO 2 -TiS 2 heterostructure decorated on sulfur and oxygen-functionalized MXene (SM-TT) through a controlled sulfurization strategy. This well-engineered architecture not only suppresses MXene restacking but also constructs abundant heterointerfaces that synergistically facilitate electron and Li + transport. Moreover, the rationally designed TiO 2 /TiS 2 ratio can well balance the adsorption-catalysis trade-off of polysulfides. Additionally, the sulfur and oxygen functional groups on MXene surface provide additional active sites for polysulfides anchoring and catalytic conversion. When employed as multifunctional interlayer in Li-S batteries, the SM-TT interlayer enables the cell to deliver a high initial capacity of 1292.8 mAh g −1 at 0.1C, maintain 768.6 mAh g −1 after 100 cycles, and exhibit 604.7 mAh g −1 at 1 C. Even under 5 mg cm −2 high sulfur loading, the cell still retains stable capacity of 722.7 mAh g −1 after 100 cycles. This work demonstrates an effective heterointerface engineering strategy for developing high-performance Li-S batteries. Download: Download high-res image (163KB) Download: Download full-size image

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF MEMBRANE SCIENCE · 2023 · IF 9.5

A novel positively charged nanofiltration membrane stimulated by amino-functionalized MXene Ti3C2Tx for high rejection of water hardness ions

Qingqing Li,Tianmeng Zhang,Zhixiang Dai,Fangyan Su,Xiangwei Xia,Ping Dong,Jianfeng Zhang

The demand to address issues such as drinking water safety and industrial fouling caused by high-hardness ions has still emphasized the development of advanced membrane materials. In this study, through a maneuverable amide-cross-linking strategy, a new positively-charged polyamide (PA) nanofiltration membrane was developed for the first time by incorporating amino-functionalized Ti 3 C 2 T x nanoparticles (Ti 3 C 2 T x -NH 2 , TN). In addition to the induced electropositivity, the hydrophilicity of the as-obtained PA-TN membrane was also elevated with a maintained nodular structure by tailoring the interfacial polymerization reaction process of piperazine (PIP) with trimesoyl chloride (TMC). Therefore, the newly developed PA-TN membrane exhibited both superhigh rejection of Ca 2+ and Mg 2+ over 96%, and the flux increased 2–3 times even for the salinity solutions than many similar NF membranes reported in literature. Furthermore, the enhanced long-term stability and fouling resistance of the PA-TN membrane was also validated due to its new organic-inorganic structural coupling and improved hydrophilicity. This work provides a new strategy for the preparation of organic-inorganic hybrid positively charged nanofiltration membranes for water softening treatment.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
INDUSTRIAL CROPS AND PRODUCTS · 2023 · IF 5.9

Well-designed structure of sandwich-like composite films based on hollow polyaniline and MXene with enhanced electromagnetic wave absorption

Qindan Chu,Wenting Tao,Hao Lin,Meng Ma,Si Chen,Yanqin Shi,Huiwen He,Xu Wang

With science and technology developing rapidly nowadays, intellective, carriable, and wearable electronic devices have also developed quickly. So far, the demand for composite films with remarkable electromagnetic interference (EMI) shielding performance is increasingly urgent. In this paper, a sandwich-like EMI shielding composite film was prepared by alternating vacuum-assisted filtration method, where hollow polyaniline (h-PANI)/cellulose nanofiber (CNF) in the surface layers and MXene/CNF in the intermediate layer. Due to the successful construction of the sandwich structure, when the proportion of MXene is just 8 wt% and h-PANI is 24 wt%, the EMI SE of the sandwich-structured composite films achieved 35.3 dB, which is better than that of the homogeneously blended film (17.3 dB) and the improvement of the SE T is mainly caused by the increase of SE A . Besides, the EMI SE of the composite film did not reduce observably even after ultrasonic, stripping, bending and other treatments, indicating that it has good EMI shielding stability. More interestingly, the absorption coefficient of the sandwich-structured composite films with h-PANI was improved by 325% contradistinguish to that of the pure CNF layer structure. This novel sandwich composite film exhibits excellent EMI shielding performance with broad application prospects in intelligent, portable, and wearable fields.

CAS / MDL: 7727-54-0 7789-24-4
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS · 2023 · IF 4

Effects of surface compositions and interlayer distance on electrochemical performance of Mo2CTx MXene as anode of Li-ion batteries

Yitong Guo,Darong Liu,Bowen Huang,Libo Wang,Qixun Xia,Aiguo Zhou

In this study, highly pure Mo 2 CT x MXene was made from Mo 2 Ga 2 C by hydrothermal method in five different etching solutions (LiF, NaF, KF, NH 4 F or HF). The as-prepared multi-layer MXene samples were furthered delaminated by tetrabutyl-ammonium hydroxide (TBAOH) to increase the interlayer distance. The c -lattice parameter ( c -LP) was increased from 20.3 Å to 23.87 Å. Thereafter, the electrochemical properties of Mo 2 CT x MXene samples as anode of Li-ion batteries (LIBs) were investigated. The multilayer Mo 2 CT x MXene made by KF + HCl etching had some residual K + on the surface and had higher discharge specific capacity (32.7 mA h/g at the current density of 800 mA/g) than the samples made by other etchants. This is because that the residual K + on MXene surface pillar the multi-layer structure, which provides larger room for Li +  storage and immigration. The Mo 2 CT x MXene after delamination with the c -LP of 23.87 Å presented a high discharge specific capacity of 239 mA h/g at the current density of 800 mA/g, which was 7.3 times higher than the discharge specific capacity of Mo 2 CT x MXene before delamination. The final discharge specific capacity was 118.83 mA h/g at 2000 mA/g after 100 cycles. The superior electrochemical performance of delaminated Mo 2 CT x MXene was attributed to the more easily accessible ion active sites between layers and the lower resistance. Therefore, the increasing of interlayer distance is the main direction to improve the performance of Mo 2 CT x as anode of LIBs.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ACS Applied Materials & Interfaces · 2023 · IF 9.5

Superior Anticorrosion Performance of Well-Dispersed MXene-Polymer Composite Coatings Enabled by Covalent Modification and Ambient Electron-Beam Curing

Yukun Zhang,Chong Chen,Zhengfei Chen,Tongtong Zhang,Yunlong Wang,Shuiyan Cao,Jun Ma

MXene-reinforced composite coatings have recently shown promise for metal anticorrosion due to their large aspect ratio and antipermeability; however, the challenges of the poor dispersion, oxidation, and sedimentation of MXene nanofillers in a resin matrix that are often encountered in the existing curing methods have greatly limited practical applications. Herein, we reported an efficient, ambient, and solvent-free electron beam (EB) curing technology to fabricate PDMS@MXene filled acrylate-polyurethane (APU) coatings for anticorrosion of 2024 Al alloy, a common aerospace structural material. We showed that the dispersion of MXene nanoflakes modified by PDMS-OH was dramatically improved in EB-cured resin and enhanced the water resistance through the additional water-repellent groups of PDMS-OH. Moreover, the controllable irradiation-induced polymerization enabled a unique high-density cross-linked network, presenting a large physical barrier against corrosive media. The newly developed APU-PDMS@MX1 coatings achieved excellent corrosion-resistance with the highest protection efficiency of 99.9957%. The coating filled with uniformly distributed PDMS@MXene promoted the corrosion potential, corrosion current density, and corrosion rate to be −0.14 V, 1.49 × 10–9 A/cm2, and 0.0004 mm/year, respectively, and the impedance modulus was increased by 1–2 orders of magnitude compared to that of APU-PDMS coating. This work combining 2D material with EB curing technology broadens the avenue for designing and fabricating composite coatings for metal corrosion protection.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
Nanomaterials · 2022 ·Vol. 12 ·期 22 ·4015 · IF 5.719

Self-Assembly 2D Ti3C2/g-C3N4 MXene Heterojunction for Highly Efficient Photocatalytic Degradation of Tetracycline in Visible Wavelength Range

Chunmin Li,Changjie Kan,Xiangtai Meng,Mengxue Liu,Qianqian Shang,Yikai Yang,Yu Wang,Xiaoxue Cui

An ultrathin 2D Ti3C2/g-C3N4MXene (2D-TC/CN) heterojunction was synthesized, using a facile self-assembly method; the perfect microscopic-morphology and the lattice structure presented in the sample with a 2 wt% content of Ti3C2were observed by the field-emission scanning electron microscopy (SEM) and transmission electron microscope (TEM). The optimized sample (2-TC/CN) exhibited excellent performance in degrading the tetracycline (TC), and the degradation rate reached 93.93% in the conditions of 20 mg/L, 50 mL of tetracycline within 60 min. Except for the increased specific-surface area, investigated by UV-vis diffuse reflectance spectra (UV-vis DRS) and X-ray photoelectron microscopy (XPS) valence spectra, the significantly enhanced photocatalytic activity of the 2-TC/CN could also be ascribed to the formation of Ti-N bonds between Ti3C2and g-C3N4nanosheets, which reduced the width of the band gap through adjusting the position of the valence band, thus resulting in the broadened light-absorption. Furthermore, the facilitated electron transmission was also proved by time-resolved photoluminescence (TRPL) and electrochemical impedance spectroscopy (EIS), which is effective in improving the quantum efficiency of photo-generated electrons. In addition, the resulting radical-capture experiment suggested that superoxide radicals have the greatest influence on photodegradation performance, with the photodegradation rate of TC reducing from 93.16% to 32.08% after the capture of superoxide radicals, which can be attributed to the production of superoxide radicals only, by the 2-TC/CN composites with a high conduction-band value (−0.62 eV). These facilely designed 2D Ti3C2/g-C3N4composites possess great application potential for the photodegradation of tetracycline and other antibiotics.Keywords:Ti3C2MXene;g-C3N4;2D catalysis;tetracycline degradation

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
COMPOSITES SCIENCE AND TECHNOLOGY · 2022 · IF 9.879

Shape-stable MXene/sodium alginate/carbon nanotubes hybrid phase change material composites for efficient solar energy conversion and storage

Xingyun Ye,Yingjiao Ma,Zhuoyue Tian,Hanxue Sun,Zhaoqi Zhu,Jiyan Li,Weidong Liang,An Li

Photothermal energy conversion and storage though phase change materials (PCMs) composites is one of the ideal methods for the efficient utilization of solar energy which is regarded as the cleanest and most sustainable renewable energy. Herein, a series of Ti 3 C 2 -introduced PCMs composites were developed by melt-dipping method exploiting MXene/sodium alginate/carbon nanotubes (CNTs) hybrid aerogels as supporting materials and tetradecylamine (TDA) as the impregnated PCM. The utilization of MXene is to enhance the light absorption performance of PCM composites which has significantly improved their absorbance under an extremely high loading rate exceeding 91.0 wt%. This result contributed to a high photothermal energy conversion efficiency up to 84.95% and an excellent thermal energy storage density with a relatively high latent heat up to 217.8 kJ/kg. Notably, the hybrid TDA/aerogel composites also exhibited remarkable cycling and crystallinity stability; their melting enthalpy still maintain up to 192.0 kJ/kg after 300th thermal and cooling cycles. Additionally, the obtained PCM composites also possess marvelous mechanical property and enhanced thermal conductivity . The excellent comprehensive performance demonstrated that the resultant composites show great potential application in solar energy conversion and storage.

CAS / MDL: 7789-24-4 2016-42-4
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CARBON · 2022 · IF 11.307

Janus-inspired flexible cellulose nanofiber-assisted MXene/Silver nanowire papers with fascinating mechanical properties for efficient electromagnetic interference shielding

Rui Cheng,Bin Wang,Jinsong Zeng,Jinpeng Li,Jun Xu,Wenhua Gao,Kefu Chen

MXene-based nanocomposites are highly desirable for electromagnetic interference (EMI) shielding applications. However, it is crucial but challenging to obtain an excellent trade-off between mechanical properties and EMI performances. Herein, inspired by Janus structure, flexible cellulose nanofiber-assisted MXene/silver nanowires (CNF-MXene/AgNWs) papers (CMAPs) are developed by a scalable sequential self-assembly plus a hot-pressing strategy. The ingenious introduction of highly conductive AgNWs into MXene forms a complementary leaf-like nanostructure , synergistically constructing highly effective conductive frameworks. Contributed by the designed Janus architecture, high-performance CNF substrate, and extensive hydrogen-bonding interactions, the resultant Janus CMAPs (J-CMAPs) with a low MXene/AgNWs addition of 30 wt% possess a high electrical conductivity (1066.85 S/cm), excellent mechanical strength (224.04 MPa) and modulus (9.98 GPa), exceptional EMI shielding effectiveness of 43.65 dB, and record-high EMI SE/t of 16788.51 dB cm −1 and SSE/t of 10543.18 dB cm 2  g −1 with a reflection-dominant shielding mechanism, successfully achieving an outstanding balance between mechanical properties and EMI shielding performances. More importantly, high frequency structure simulator (HFSS) simulation in the frequency domain is further conducted to intuitively comprehend the attenuation process of electromagnetic waves and shield mechanism, verifying fascinating EMI shielding performances. Besides, the Janus paper also presents desirable Joule heating performances at low input voltage, short response time (<10 s), and superb heating stability and long-term steady reliability. We believe that the J-CMAPs demonstrate the great potential and advantage for advanced EMI shielding and portable thermal management applications.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING RESEARCH & DESIGN · 2022 · IF 4.119

MXene-based composite forward osmosis (FO) membrane intercalated by halloysite nanotubes with superior water permeance and dye desalination performance

Hongdan Wu,Ming Li,Yehao Zhao,Zhihui Zhou,Shaoqiang Hua,Jian Zhang

MXene two-dimensional (2D) laminate membranes have attracted many researchers in the field of membrane separation due to its adjustable interlayer spacing. However, MXene 2D laminate membranes has been inability to achieve dye desalination due to simultaneous rejection of both dyes and salts in salt-containing dye. The looser MXene/C-HNTs composite forward osmosis (FO) membrane was successfully prepared via vacuum filtering, in which halloysite nanotubes modified with cetyltrimethylammonium bromide (C-HNTs) and MXene (Ti 3 C 2 T x ) nanosheets were self-assembled by electrostatic interactions. The insertion of C-HNTs effectively increased the interlayer spacing and enhanced the compression resistance of the composite membranes. With a mass ratio of 1:3 between Ti 3 C 2 T x nanosheets and C-HNTs, the composite membrane's pure water flux was raised to 191.4 L/(m 2 ·h). The insertion of C-HNTs not only enabled the composite membrane to keep a superior dye rejection rate (CR rejection rate >99%), but also effectively reduced the rejection rate of monovalent salt (NaCl <5%) and divalent salt (<13% and <10% for Na 2 SO 4 and MgSO 4 , respectively).

CAS / MDL: 314-13-6
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Advanced Materials Technologies · 2022 ·Vol. 7 ·期 7 ·2101639 · IF 8.856

Ti3C2Tx MXene-RAN van der Waals Heterostructure-Based Flexible Transparent NIR Photodetector Array for 1024 Pixel Image Sensing Application

Chuqiao Hu,Hao Chen,La Li,Hui Huang,Guozhen Shen

The enriched surface functional group such as  OH termination and unique 2D structure of Ti 3 C 2 T x MXene provide the feasibility to form hydrogen bonds with organic photosensitive materials as van der Waals heterostructures, thus can realize the improved photoresponsivity of near infrared (NIR) photodetectors (PDs). In this work, an organic–inorganic van der Waals heterostructure-based NIR PD array is designed using Ti 3 C 2 T x MXene as conductive electrodes and RAN film as active materials (Ti 3 C 2 T x -RAN PDs). The on-off ratio of the fabricated devices shows 6.25 times higher than that of PDs using thermal evaporated Au electrode (Au-RAN PDs) under 1064 nm laser excitations. The fabricated Ti 3 C 2 T x -RAN NIR PDs also possess outstanding mechanical stability with no obvious photoresponse degradation under different bending states and high transparency with a transmittance above 70% in the visible region. Owing to the high performance of the Ti 3 C 2 T x -RAN PDs, a 1024-pixel (32 × 32) image sensor array is fabricated to achieve delicate, vivid, and higher resolution imaging of a “deer,” opening up a new avenue for the biomimetic vision and flexible wearable accurate image sensing.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。