文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第2965至2976个,产品总数6,361个

切换升序
cellulose
COMPOSITES SCIENCE AND TECHNOLOGY · 2026 · IF 9.9

Cellulose nanocrystals-regulated core-shell fibrous films for synergistic radiative cooling and phase change thermal management

Bin Ye,Haijiao Yu,Yu Chen,Jinbo Yao,Guangping Han,Yanbo Liu,Wanli Cheng

CNCs enhance radiative cooling by tuning structural scale and optical parameters. • CNCs promote PEG crystallization for efficient thermal energy storage and release. • Simultaneous regulation of cooling and thermal buffering by CNCs enhances comfort. Thermal comfort is increasingly challenged by heat waves and abrupt temperature fluctuations, requiring materials that dissipate heat while buffering thermal shocks. Existing combinations of radiative cooling and phase change systems are often achieved by stacking or mixing components, leaving structural design and performance regulation largely independent, which limits the mutual reinforcement of steady cooling and transient thermal regulation. Herein, we employ coaxial electrospinning to construct a core-shell fibrous film composed of polyethylene glycol@poly (vinylidene fluoride-co-hexafluoropropylene)/cellulose nanocrystals (PEG@PVDF-HFP/CNCs) for the synergistic regulation of radiative cooling and phase change performance. The shell achieves 94.91% solar reflectivity (0.3-2.5 μm) and 97.56% infrared emissivity (8-13 μm), while the core provides high thermal shock resistance with a phase change enthalpy of 47.3 J g −1 . Crucially, CNCs enhance radiative cooling by optimizing structural scale and optical parameters, while simultaneously improving phase change thermal regulation by inducing PEG crystallization to enhance latent heat storage, achieving synergistic enhancement of both functions within the same material system. Outdoor measurements demonstrate a steady-state temperature reduction of 10.5°C together with effective buffering against abrupt ambient temperature fluctuations. This work achieves synergistic optimization of radiative cooling and phase change performance within one system, providing a novel pathway for thermal comfort regulation under dynamic environments. Download: Download high-res image (500KB) Download: Download full-size image

CAS / MDL: 67-64-1 68-12-2
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Ornamental Plant Research · 2026 ·Vol. 6 ·期 1 · IF 3.1

Comparative transcriptomics identifies LlCSLE1 as a key regulator of cellulose accumulation during bulbil formation in lily

Zhixuan Zhang,Yixin Yuan,Rui An,Fengping Yang,Mengdi Wang,Jiahui Liang,Mingfang Zhang,Weidong Li,Wei Li,Haoyan Dong,Wenqiang Pan,Ming Sun,Yunpeng Du

In lilies, bulbils are a specialized form of axillary bud essential for vegetative reproduction. To elucidate the molecular mechanisms regulating their formation, we performed transcriptome sequencing on leaf axil tissues from four lily varieties with contrasting bulbil-forming and non-bulbil-forming phenotypes. Analysis revealed differentially expressed genes (DEGs) notably enriched in carbohydrate metabolism pathways. During bulbil development, a gradual increase in leaf axil cellulose content was observed as measured by the anthrone colorimetric method. This correlated with the upregulation of the key cellulose synthase-like gene LlCSLE1 as determined by real-time quantitative PCR. Functional validation confirmed that virus-induced gene silencing (VIGS) of LlCSLE1 led to a significant reduction in both cellulose content and bulbil number. Our findings establish LlCSLE1 as an important regulator of bulbil formation, underscoring the critical role of cellulose-mediated cell wall remodeling in this process. This study provides a molecular foundation for understanding vegetative reproduction and advances molecular breeding strategies in lilies.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
POLYMER · 2026 · IF 5.1

Regulating zinc deposition with fluorinated polyimide/cellulose composite nanofiber separators for dendrite-free zinc-ion batteries

Caizhe Sun,Mei Li,Yuefei Zou,Xiaolin Xue,Qunhao Wang,Jiangqi Zhao,Wei Zhang,Canhui Lu

Currently, the advancement of aqueous zinc-ion batteries (ZIBs) is extensively hampered by challenges such as formation of zinc dendrites and side reactions on the zinc anode. As a crucial element of batteries, the separator can greatly affect battery performance, and the present study aims to develop a novel separator to tackle the above challenges in aqueous ZIBs. Toward this end, a nonwoven fabric of fluorinated polyimide/cellulose (fPC) composite nanofiber is succesfully manufactured through electrospinning. The resultant membrane exhibits a uniform pore structure, abundant zincophilic groups, high hydrophilicity and excellent mechanical properties. When used as a separator for aqueous ZIBs, the fPC membrane can effectively promote zinc ion transport and achieve uniform Zn 2+ deposition, effectively and concurrently suppressing both dendrite formation and side reactions. As a consequence, the aqueous Zn||Zn symmetric cell assembled with fPC exhibits superior cycle stability over 1800 h at 1 mA cm −2 /1 mAh cm −2 , while the aqueous Zn||MnO 2 full cell displays excellent rate performance and stable cycling performance, suggesting the high potential of fPC in real-world aqueous ZIB applications.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Journal of Bioresources and Bioproducts · 2026 · IF 19.9

An All-in-One Water-Soluble Cellulose Adhesive: Exhibiting Robust Bonding, Extreme-Temperature Tolerance and Reusability

Tianlong He,Yumei Chen,Tao Wu,Juchun Liu,Lihua Zhang,Hongtao Zhang,Haibo Xie,Yuanlong Guo

The replacement of formaldehyde-based wood adhesives with sustainable alternatives remains a significant challenge due to performance and reusability limitations. Herein, we reported a water-soluble cellulose ethyl phosphite (CEP) adhesive synthesized through a one-pot transesterification strategy in a novel CO 2 -based solvent system, where the superbase served dually as solvent and catalyst. The CEP adhesive demonstrated an integrated performance profile: exceptional bonding strength (5.73 MPa), remarkable extreme-temperature tolerance (maintaining 5.54 MPa at –196 °C and 4.99 MPa at 100 °C), robust humidity resistance (4.87 MPa at the relatively humidity of 90%), good long-term stability (4.20 MPa after 28 d), and reusability. The adhesion mechanism combined strong interfacial hydrogen bonding with mechanical interlocking, while its water solubility enabled reversible bonding and substrate recovery. This unique combination of properties positioned CEP as an ideal adhesive for demanding applications, including reconfigurable furniture, recyclable packaging, and structural components in thermally volatile environments, providing a sustainable material platform for the transition toward a circular bioeconomy.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
ACS Sensors · 2026 · IF 10.9

Functionalized Cellulose-Based Wearable Textile Detection from Insensible Sweat to a Multiparameter Biomarker in Sensible Sweat

Feiyang Huang,Hao Wen,Zhiqing Gao,Guoqing Feng,Fengrong Liu,Ang Li,Yunrui Cao,Yuhang He,Qingjun Liu

Sweat is a key physiological fluid involved in regulating body temperature and maintaining hydration balance. Compared with sensible sweat, insensible sweat is continuously lost in the form of water vapor. Its dynamic variation is closely associated with skin barrier function and basic thermoregulatory activity. However, its low flux and diffuse distribution make reliable detection challenging. In addition, multiparameter analysis of biochemical components in sensible sweat is of significant importance for the evaluation of electrolyte balance and physiological status. In this work, a multiparameter textile platform based on functionalized cellulose materials was developed for monitoring and analyzing the sweating process. Cellulose was employed as the core material platform. By incorporating lithium chloride, humidity-responsive units were fabricated and further configured into a scalable fabric-integrable array, enabling the detection of subtle humidity variations induced by low-flux insensible sweat. As thermal load increased and the system transitioned to the sensible sweating stage, electrochemical sensing fibers were integrated. In combination with the sweat absorption and transport capability of cellulose yarns, the platform enabled the determination of key biochemical parameters in sensible sweat, including pH, sodium, potassium, and uric acid. On-body sweat analysis demonstrated that the textile system enables array-based monitoring of insensible sweat, during the transition to the sensible sweating stage, allowing simultaneous acquisition of multiple physiological parameters. This integrated capability provides a promising approach for continuous monitoring and evaluation of the human sweat rate, electrolyte balance, and related physiological conditions.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES · 2026 · IF 8.7

Reed-inspired dual-siloxane engineering of cellulose nanofibril/alginate aerogels for wet-dry-tolerant thermal insulation

Wenhui Gu,Dongxing Lu,Xiaohong Yuan,Qingqing Wang,Yunjuan Liu,Qufu Wei

Reed-inspired aerogels integrate hydrophobic interfaces and flexible junctions. • MTMS deposition yields high hydrophobicity with a WCA of 139.1°. • PDMS bridges dissipate junction stress under repeated compression. • Dual-siloxane modification limits shrinkage during wet-dry cycling. • Re -dried aerogels retain low thermal conductivity after moisture exposure. Cellulose-based aerogels are promising sustainable thermal insulators, but their hydrophilic skeletons absorb moisture, causing capillary-shrinkage-induced collapse and insulation loss. Meanwhile, rigid hydrogen-bonded or ionically cross-linked networks fatigue under cyclic deformation. Inspired by reed structures, which integrate a water-repellent exterior with a lightweight porous interior, a two-step methyltrimethoxysilane (MTMS)/polydimethylsiloxane (PDMS) dual-siloxane strategy was developed to regulate wettability and junction flexibility in cellulose nanofibril/sodium alginate aerogels, where MTMS forms a water-repellent external interface and PDMS improves the flexibility and cyclic stability of the interconnected porous framework. Chemical vapor deposition of MTMS created a methyl-rich, low-surface-energy layer, and subsequent PDMS vacuum impregnation and thermal curing formed flexible coatings and bridges at fibrillar junctions. The optimized aerogel showed a water contact angle of 139.1° and retained 92.18% and approximately 68% of peak stress after 10 and 100 compression cycles at 50% strain, respectively. Its thermal conductivity changed from 48 mW m −1  K −1 in the dry state to 72 mW m −1  K −1 under near-saturated wet conditions and recovered to 56 mW m −1  K −1 after re-drying following 72 h wet-dry cycling. Although its dry-state thermal conductivity is higher than that of many conventional commercial insulation materials, the aerogel exhibited more stable thermal-insulation performance and partial recovery after re-drying following the 72 h wet-dry cycling protocol. Roof-model tests confirmed more stable insulation under simulated rainfall and weathering. This work provides a structure-oriented strategy for biomass-derived aerogels in wet-dry environments. Download: Download high-res image (177KB) Download: Download full-size image

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Nature Communications · 2026 · IF 18.1

Expandable and scalable production of cellulose nanofibrils via highly efficient swelling-modification in deep eutectic solvent

Wang Shaoning,Zhang Lili,Zhu Enqing,Chen Huangjingyi,Hu Zhixing,Wang Si,Yu Juan,Ullah Muhammad Wajid,Fan Yimin,Wang Zhiguo

The scalable production of chemically tailored cellulose nanofibrils (CNFs) remains challenging because native cellulose lacks sufficient chemical versatility for simultaneous fibrillation and functional regulation. Here, we develop a highly efficient swelling-modification strategy using a hydrated deep eutectic solvent (Zn(OAc) 2 /ChCl/H 2 O) to enable efficient CNF production and programmable chemical modification. Zn(OAc) 2 regulates proton activity through buffering effects, suppressing excessive hydrolysis and preserving the crystalline structure of CNFs with an ultrathin diameter (3–4 nm), high aspect ratio (~1800), high degree of polymerization (600–900), and high yield (93%). By incorporating diverse cyclic anhydrides, this DES system is transformed into a multifunctional operating platform, enabling customizable CNFs with diverse chemical functionalities, including carboxyl groups, double bonds, bridged bicyclic structures, and aromatic rings. This highly efficient swelling-modification strategy provides a scalable and expandable route toward customized CNFs, advancing the design of cellulose-based functional nanomaterials.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY · 2025 · IF 14.3

Ultrahigh thermal conductivity and photothermal conversion in interface-optimized bacterial cellulose/boron nitride nanosheets/MXene composites

Xinyue Liu,Zhongguo Zhao,Xin Xie,Kaiyuan Wang,Wenhu Li,Chouxuan Wang,Rong Xue,Lei Wang

Polymer-based thermal conductive composites (PTCs) are crucial for managing heat in microelectronics, yet the impact of filler–filler interfacial thermal resistance (ITR) on their thermal performance remains unclear despite efforts to optimize the filler–matrix interfaces. In this study, the creation of continuous thermal conductive networks with enhanced filler–filler interface contact was achieved in bacterial cellulose/boron nitride nanosheets/MXene composites (BC/BNNS/MXene) by the in-situ coating of silver nanoparticles on the surface of boron nitride nanosheets (Ag@BNNS). The homogeneously dispersed and well-exfoliated BNNS are bridged to each other via the Ag located at the surface of BNNS and a 3D thermal conductive network is formed with solid Ag junctions lying in among. The resulting 3D “branch-leaf” structure significantly enhances thermal conductivity to 18.5 W m −1 K −1 at 30 wt% Ag@BNNS filler loading, and was demonstrated by first-principles simulations, proving that the merged Ag was used as a thermal transport joint to reduce thermal contact resistance within the 3D BNNS and MXene network. Utilizing the MBAg30 composite film as a thermal interface material has been shown to effectively lower the operating temperature of smartphones, reducing it from 33.4°C to 29.0°C. The film also demonstrates efficient photothermal conversion, with a surface temperature of 83.6°C under 100 mW cm −2 light intensity and a photothermal conversion efficiency of 96.3 %. It demonstrates good stability after seven cycles and can increase ice melting rates in practical applications like agricultural greenhouses and solar heating. The present strategy provides an effective route for developing high-performance PTCs.

CAS / MDL: 7789-24-4 68-12-2
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CARBOHYDRATE POLYMERS · 2025 · IF 12.5

Bioinspired phosphorylated cellulose nanocrystals-based multi-crosslinked binder for enhanced stability and sustainability in silicon anodes

Lan Zhao,Fengcai Lin,Haijun Li,Lingling Qian,Yingshan Shi,Zhiyi Cao,Xuan Yang,Biao Huang,Beili Lu,Hanyang Liu,Lirong Tang

Silicon (Si) is a promising anode for high-energy-density batteries, but its ~300 % volume expansion causes particle fracture and electrode instability. Effective binders are essential for maintaining electrode integrity. Inspired by the adhesion mechanism of natural ivy, we developed a small-molecule-enhanced polymer binder derived from phosphorylated cellulose nanocrystals (PCNCs) and acrylic acid rosin to enhance the electrochemical and mechanical performance of Si anodes. PCNCs, with their high aspect ratio and surface activity, construct an interconnected three-dimensional (3D) network within the polymer matrix, reinforcing structural stability. Additionally, phosphate groups promote water-based polymer compatibility and ion transport, facilitating efficient lithium-ion conduction. Acrylic acid rosin mimics the adhesion mechanism of Parthenocissus tricuspidata , establishing strong hydrogen bonds, ion-dipole interactions, and covalent crosslinking with Si particles. This incorporation also forms a unique “soft outside, rigid inside” topology, buffering stress, protecting the solid electrolyte interface (SEI), and synergizing with polyacrylic acid (PAA) to form a robust network. The binder provides an excellent electrochemical performance, achieving a high initial coulombic efficiency (86.85 %), superior ionic conductivity (18.825 mS/cm 2 ), and remarkable cycling stability at high silicon loading (maintaining 1272 mAh/g after 100 cycles at 0.2C). Its green synthesis and scalability offer a sustainable path for next-generation Si anodes.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
FOOD CHEMISTRY · 2025 · IF 9.8

Elucidation of the thermal aggregation processing of soy protein isolate – dialdehyde carboxymethyl cellulose cross-linked gel

Yidan Fu,Ran Tian,Jiarui Zhao,Jing Wang,Xiaonan Sui

In this study, soy isolate protein (SPI)–dialdehyde carboxymethyl cellulose (DCMC) cross-linked gels were prepared by heat treatment at different stages of the gel preparation process. The -NH 2 in SPI reacts with the -CHO in DCMC in a Schiff base reaction to form an imine bond (C N) to achieve crosslinking. The aim of study was to investigate the impact of heat treatment at different stages of the gel preparation process on the mechanical properties, degree of Schiff base reaction, microstructure and rheological properties of cross-linked gels. The results demonstrated that both heat treatment and DCMC could enhance the gelation of SPI. The textural properties of gels were significantly enhanced by heating treatment, resulting in a denser microstructure. Furthermore, heat treatment promotes the degree of Schiff base reaction in gels. In general, it can change the properties of gels by simply altering the heating phase of the gel preparation process.

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
FOOD CHEMISTRY · 2025 · IF 9.8

Physicochemical properties and structural characterization of crosslinking modifications of carboxymethyl cellulose with varying degrees of substitution

Can Zhao,Lifen Li,Hanbing Xiao,Yuhua Huang,Yingting Zhao,Liangfeng Ma,Yuting Tian

To enhance the physicochemical properties of carboxymethyl cellulose (CMC), CMC with different degrees of substitution (DS) were crosslinked with citric acid (CA) and potato starch (PS), investigating the differences in physicochemical and structural properties of CMC with different DS before and after modification (CK/CM-II/III/IV). The results showed that: (1) The water absorption capacity of CMC with different DS after modification (CM-II/III/IV) reached up to 156.67 g·g −1 , and the rheological properties were improved; (2) The results of FT-IR, SEM and XRD indicated that CM-II/III/IV formed structurally stable macromolecular polymers through intermolecular interaction forces; (3) The water absorption capacity, rheology and viscosity of CMC with high DS had been improved; (4) The results of FT-IR, SEM and XRD indicated that the CMC structures of different DS were similar, the CMC structure of high DS was stable, and excessive DS led to the weakening of intermolecular interaction forces.

CAS / MDL: 104-55-2
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
WATER AIR AND SOIL POLLUTION · 2025 ·Vol. 236 ·期 13 ·1-17 · IF 3

Hydroxyethyl Cellulose Gel-Loaded Melamine/Terephthalaldehyde Mesoporous Materials for p-Nitrophenol Removal in Low-Concentration Wastewater

Zhang Shoucun,Li Zhuomin,Yang Ning,Wu Wenli,Wang Yuan

As an important intermediate, p -nitrophenol has been widely used in the production of various chemicals, including pharmaceuticals, insecticides, and dyes, etc. However, it exhibits significant ecological toxicity and has a tendency to accumulate in organisms, even at very low concentrations. Therefore, it is essential to remove p -nitrophenol as thoroughly as possible from wastewater before discharging it into the environment. Among various treatment methods, physical adsorption stands out as a safe, reliable, and widely applicable approach, particularly suitable for small-scale water treatment applications. In this study, a melamine/terephthalaldehyde-based material (PMT) with a rich mesoporous structure was synthesized. The presence of abundant nitrogen elements within the material’s structure enhances its adsorption capacity for p -nitrophenol. Subsequently, PMT was dispersed as the dispersed phase into a hydrogel (HGel) structure through post-polymerization, which improved the material’s stability during use. Experimental results demonstrated that the gel composite material achieved a 97.6% adsorption removal rate for p -nitrophenol-contained wastewater. Moreover, after six cycles of reuse, the material retained an adsorption removal rate of 84.2%, highlighting its excellent adsorption performance and reusability.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。