文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第2977至2988个,产品总数4,858个

切换升序
(Fe
CHEMICAL ENGINEERING JOURNAL · 2020 · IF 10.652

Removal of trichloroethene by iron-based biochar from anaerobic water: Key roles of Fe/C ratio and iron carbides

Fanxu Meng,Zhenjie Li,Cheng Lei,Kun Yang,Daohui Lin

Nanoscale zero-valent iron (nZVI) is widely studied for environmental remediation in recent years. However, its easy agglomeration, vulnerable oxidation, and runoff limit its practical application. Herein, iron-based lignin-derived biochar composites (Fe-LBC) with different Fe/C ratios were synthesized using a facile carbothermal reduction method and applied for trichloroethene (TCE) removal from anaerobic water. The synthesized Fe-LBC was equipped with higher specific surface area, more uniform nanoparticles distribution, and higher iron carbide content with the decrease of Fe/C ratio from about 1:5 (Fe-LBC 5 ) to 1:30 (Fe-LBC 30 ). TCE removal by Fe-LBC firstly increased as the Fe/C ratio increased from 1:10 6 to 1:10 3 , and then decreased with the Fe/C ratio further increased to 1:5. The removal efficiency remained largely stable (97.0–98.5%) within the Fe/C ratio range of 1:10 4 -1:30. Fe-LBC 30 (1.0 g L −1 ) could remove 97.4% of TCE (10.4 mg L −1 ), and owned the highest dechlorination efficiency (30.0%). Iron carbides but not Fe 0 could mainly contribute to the dechlorination. The quenching experiment reveals atomic hydrogen (H*) formed under the catalysis of iron carbides, and 1,2-dichloroethene was identified as the main degradation product derived from hydrogenolysis; electrochemical analyses suggest iron carbides could also serve as electron donors to TCE. Moreover, Fe-LBC 30 maintained excellent TCE removal efficiency in various water matrixes and pH range of 3–9, revealing its high application potential in practical groundwater remediation. This work firstly demonstrated the reductive dechlorination action of iron carbides rather than nZVI in iron-biochar hybrid materials, boosting our knowledge and potential application of iron-based materials.

CAS / MDL: 79-01-6
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Journal of Environmental Chemical Engineering · 2020 · IF 4.3

Preparation of MIL-100(Fe) and multi-walled carbon nanotubes nanocomposite with high adsorption capacity towards Oxytetracycline from solution

Shanshan Chen,Zhongyang Zang,Shusheng Zhang,Gangfeng Ouyang,Runping Han

Metal-organic framework and nano carbon materials were widely used in separation field in recent years. In this study, nanocomposite of MIL-100(Fe) and multi-walled carbon nanotubes (MIL-100(Fe)-CNTs) was prepared and characterized and its adsorption property towards Oxytetracycline (OTC) was presented. MIL-100(Fe)-CNTs exhibits higher adsorption capacity compared to MIL-100(Fe), making this composite as one of the favorable adsorbents. The adsorption capacity of MIL-100(Fe)-CNTs reached 429 mg·g −1 at 313 K. The langmuir model and Koble-Corrigan model were better to predict the equilibrium data while the pseudo-second-order kinetic model could well describe the kinetic process. The process was endothermic and spontaneous while the ion exchange was the main adsorption mechanism of OTC on MIL-100(Fe)-CNTs. The nanocomposite is promising to effectively remove OTC from solution.

CAS / MDL: 554-95-0
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING · 2020 · IF 6.444

Leaf-like Fe/C composite assembled by iron veins interpenetrated into amorphous carbon lamina for high-performance microwave absorption

Xueai Li,Wenqi Dong,Can Zhang,Wanchun Guo,Chunsheng Wang,Yingmei Li,Haiyan Wang

Two-dimensional microwave-absorbing materials (MAMs) with abundant preferable interfaces are highly desirable for high-performance microwave absorption. Herein, a leaf-like Fe/C structure, consisting of iron veins interpenetrated in amorphous carbon lamina, was fabricated by reducing a petal-like iron alkoxide in an H 2 /Ar atmosphere. The synthesized leaf-like Fe/C composites dissipate microwaves in an effectively similar process green to leaves absorbing sunlight. First, the unique leaf-like structure enables microwaves to pass into the composites because the 2D amorphous carbon, with its high BET surface area, provide adequate access for microwaves. Then, the incident microwave is attenuated by the distinctly improved dielectric loss caused by enhanced interface polarization and an effective magnetic loss from the natural resonance of iron. Therefore, the leaf- like Fe/C composite shows microwave absorption with a maximum reflection loss of − 59.7 dB, whose effective bandwidth (reflection loss ≤  − 10 dB) covers the whole Ku band and X band with thicknesses of only 1.5 mm and 2.0 mm, respectively.

CAS / MDL: 10025-77-1 1643-19-2
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY · 2020 · IF 4.939

ZnS, Fe, and P co-doped N enriched carbon derived from MOFs as efficient electrocatalyst for oxygen reduction reaction

Liping Zhao,Anqi Wang,Ailin Yang,Guihong Zuo,Jun Dai,Youjin Zheng

Exploring electrocatalysts with low cost and excellent performance for oxygen reduction reaction is still a significant challenge. In this paper, we introduce a novel strategy to fabricate ZnS, Fe, and P co-doped N enriched carbon (ZnFeSP/NC) via the direct carbonization of PVP/ZIF-8 combined with absorption, sulphurization , and phosphorization processes. The as-synthesized ZnFeSP/NC was used as electrocatalyst for oxygen reduction reaction (ORR). We explored the influence of Fe, S, and P elements on the ORR activity of the catalysts. It can be found that ZnS nanoparticles were formed and attached on the surface of the ZnFeSP/NC nanoparticles. α-Fe and P element were well dispersed on ZnFeSP/NC nanoparticles. Fe, S, and P element can highly enhance the ORR activity of the catalysts. Compared to Zn/NC, ZnFe/NC, and ZnFeS/CN, ZnFeSP/NC shows the optimal ORR performance with the half-wave potential of 0.859 V and a current density of 3.33 mA cm −2 at −0.85 V. Furthermore, ZnFeSP/NC also exhibits excellent long-term operation stability, effectively avoiding any ORR performance decay.

CAS / MDL: 31175-20-9
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH · 2020 ·Vol. 27 ·期 30 ·37839-37851 · IF 3.056

Facile synthesis of a novel Ag3PO4/MIL-100(Fe) Z-scheme photocatalyst for enhancing tetracycline degradation under visible light

Xu Jun,Xu Jinmei,Jiang Shanqing,Cao Yu,Xu Kailin,Zhang Qiuya,Wang Liping

In this work, a novel visible light–driven heterostructure Ag 3 PO 4 /MIL-100(Fe) composite photocatalyst was successfully synthesized via facile chemical deposition method at room temperature. Especially when the mass ratio of Ag 3 PO 4 was 20% of MIL-100(Fe) (APM-2), it displayed the best photocatalytic performance, for which the degradation rate of tetracycline (TC) in conventional environment was 6.8 times higher than that of bare MIL-100(Fe). In addition, the effects of the initial concentration and pH of the solution on the degradation of tetracycline were also studied, and the results showed that the degradation of tetracycline was more favorable in a weakly alkaline environment. The excellent performance of Ag 3 PO 4 /MIL-100(Fe) composites was attributed to the fact that on the basis of having adequate photocatalytic active sites, modifying MIL-100(Fe) with an appropriate amount of Ag 3 PO 4 particles can more effectively separate photogenerated electron–hole pairs. Five cycles of experiments showed that APM-2 has good photostability. Lastly, it was proved through quenching experiments that •O 2 − , h + , and •OH all played corresponding roles in the degradation process, and a possible Z-scheme heterostructure photocatalytic degradation mechanism was proposed.

CAS / MDL: 79603-03-5
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
SENSORS AND ACTUATORS B-CHEMICAL · 2020 · IF 7.1

Michael reaction-assisted fluorescent sensor for selective and one step determination of catechol via bifunctional Fe-MIL-88NH2 nanozyme

Li Hou,Yuemei Qin,Tianran Lin,Ying Sun,Fanggui Ye,Shulin Zhao

The synthesized Fe-MIL-88NH 2 was used as a nanozyme and fluorescence probe to successfully construct a selective fluorescent sensing platform for one step determination of catechol. Fe-MIL-88NH 2 exhibited excellent peroxidase mimic property as well as fluorescence property. With the addition of H 2 O 2 and catechol, Fe-MIL-88NH 2 would catalyze the H 2 O 2 to form hydroxyl radicals ( OH). Then, the oxidation of catechol would be triggered by the formed OH, which resulted in the generation of 1, 2-benzoquinone. Afterwards, Michael reaction between the oxidation products of catechol (1, 2-benzoquinone) and Fe-MIL-88NH 2 ligands was triggered and then quenched the fluorescence of Fe-MIL-88NH 2 . The principle of the selective determination of catechol was due to the assistant effect of Michael reaction. Based on the above sensing mechanism, a fluorescent sensing platform for the determination of catechol was established. The limit of detection was 0.0913 μmol L −1 (3S 0, n=8 /K) within a fast response of 10 min. This simple and selective strategy, based on the Michael reaction and the superiority of Fe-MIL-88NH 2 nanozyme, provided a concise sensing platform for catechol determination, which broadened the scope of application of nanozyme and showed a great potential application for on-site testing in food and biology analysis.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
SCIENCE OF THE TOTAL ENVIRONMENT · 2020 · IF 6.551

Synergistic effect of mixed Cu and Fe oxides and chlorides on electrophilic chlorination of dibenzo-p-dioxin and dibenzofuran

Dan Wang,Haijun Zhang,Yun Fan,Rong Cao,Yuan Gao,Jiping Chen

The direct chlorination of dibenzo- p -dioxin (DD) and dibenzofuran (DF) is an important source of dioxins in combustion flue gas . The chlorination reaction mainly occurs via electrophilic substitution induced by Cu and Fe chlorides, which must cohabit on particulate matters in mixed state. To explore the mechanism for DD/DF chlorination in real combustions flue gas, 8 kinds of CuO/Fe 2 O 3 /CuCl 2 /FeCl 3 composites impregnated onto silica powder were prepared to simulate the coexisting state of Cu and Fe species in combustion flue gas. Mixed Cu and Fe oxides and chlorides induced a significant synergistic effect on electrophilic chlorination of DD/DF. The efficiencies of DD/DF chlorination over composites containing both Cu and Fe species were 1–2 orders of magnitude higher than those over composites containing only Fe species at 250 °C. CuCl 2 species were highly active sites for electrophilic chlorination. FeCl 3 acted as an excellent promoter to accelerate DD/DF chlorination over CuCl 2 species. The elevated proportion of Cu and Fe oxides was also favora ble for electrophilic chlorination. Compared with DF, DD was more prone to be chlorinated. Chlorine substitution primarily occurred at 2, 3, 7 and 8 positions of DD and DF. Furthermore, the possible mechanism for synergistic effect on electrophilic chlorination of DD/DF was speculated.

CAS / MDL: 1317-38-0
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
APPLIED CATALYSIS B-ENVIRONMENTAL · 2020 · IF 16.683

Visible Light-Driven Selective Organic Degradation by FeTiO3/Persulfate System: the Formation and Effect of High Valent Fe(IV)

Lihan Pan,Wen Shi,Tapas Sen,Lingzhi Wang,Jinlong Zhang

The role of high-valent Fe has rarely been explored in persulfate-based heterogeneous reaction. Herein, the existence of Fe(IV) is verified in a visible light-assisted FeTiO 3 /persulfate system using methyl phenyl sulfoxide as the probe. The FeTiO 3 /persulfate/light system is capable of selectively degrading aromatic compounds with lower ionization potentials including tetracycline and bisphenol A by photo-generated high-valent Fe(IV). The contributions from SO 4 ·- , · OH and 1 O 2 are excluded. The comparable efficiency in the dark requires higher dosages and suffers from a rapid deactivation. Based on XPS, Raman and EPR analyses, the poor dark activity is caused by the formation of a complex between in situ formed Fe(III) and SO 4 2- on the FeTiO 3 surface; this complex is, however, the key intermediate for Fe(IV) production under the light irradiation. This study reveals the long-ignored role of SO 4 2- as an abundant species in iron-based persulfate systems. We also call for re-evaluating the real oxidation mechanism in other persulfate-based reactions considering the different oxidation mechanisms of radicals and high-valent iron.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ACS Sustainable Chemistry & Engineering · 2019 · IF 6.97

Fe-, N-Embedded Hierarchically Porous Carbon Architectures Derived from FeTe-Trapped Zeolitic Imidazolate Frameworks as Efficient Oxygen Reduction Electrocatalysts

Minlin Mao,Jiang Deng,Tingting Yan,Junjie Shen,Jianping Zhang,Liyi Shi,Dengsong Zhang

During the design and construction of an efficient iron–nitrogen–carbon (Fe–N–C) electrocatalyst, it was difficult to avoid the formation of iron oxides along with the hierarchical carbon frameworks containing dispersed FeNx sites. As a result, a slow oxygen reduction reaction (ORR) occurred, making it difficult to improve the electrocatalytic property. Herein, we have successfully synthesized the Fe, N-doped hierarchically porous carbon architectures from FeTe-trapped ZIF-8 coated with polydopamine by heat treatment. During the pyrolysis process, the evaporation of tellurium could inhibit the formation of iron oxides, promote the formation of more FeNx active species, and facilitate the formation of mesoporous structure to accelerate mass transfer and increase the approachability of active species. The resulting Fe, N-doped porous carbon architectures possessed excellent ORR catalytic performance, and the half-wave potential was 10 mV more than that of the precious Pt/C catalysts. Besides, the obtained catalysts present a superb methanol tolerance and long-term durability compared to precious Pt/C catalysts in alkaline media. This work opens up new avenues for the construction of the uniformly dispersed FeNx sites catalysts for ORR.

CAS / MDL: 62-31-7 77-86-1
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Catalysts · 2019 ·Vol. 9 ·期 11 ·906 · IF 3.444

Acceleration of Persulfate Activation by MIL-101(Fe) with Vacuum Thermal Activation: Effect of FeII/FeIII Mixed-Valence Center

Jieyang Yang,Zequan Zeng,Zhanggen Huang,Yan Cui

In this work, the activation effect of vacuum thermal treatment on MIL-101(Fe) (MIL: Materials of Institute Lavoisier) was investigated for the first time. It demonstrated that vacuum thermal activation could accelerate the activation of persulfate (PS) by MIL-101(Fe), and the enhancement of the catalytic capacity of MIL-101(Fe) was mainly attributed to the change in the FeII/FeIII mixed-valence center. The results of the SEM and XRD showed that vacuum thermal activation had a negligible effect on the crystal structure and particle morphology of MIL-101(Fe). Meanwhile, the higher temperature of vacuum thermal activation caused a higher relative content ratio of FeII/FeIII. A widely used azo dye, X-3B, was chosen as the probe molecule to investigate the catalytic performance of all samples. The results showed that the activated samples could remove X-3B more effectively, and the sample activated at 150 °C without regeneration could effectively activate PS to remove X-3B for at least 5 runs and approximately 900 min. This work highlights the often-overlooked activation effect of vacuum thermal treatment and provides a simple way to improve the catalytic capacity and reusability of MIL-101(Fe) which is beneficial for the application of MIL-101(Fe)/PS systems in azo dye wastewater treatment.Keywords:vacuum thermal activation;MIL-101(Fe);persulfate;azo dye

CAS / MDL: 100-21-0 75-65-0
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
MOLECULES · 2019 ·Vol. 24 ·期 20 ·3718 · IF 3.06

Metal-Organic Frameworks of MIL-100(Fe, Cr) and MIL-101(Cr) for Aromatic Amines Adsorption from Aqueous Solutions

Mao-Long Chen,Shu-Yang Zhou,Zhou Xu,Li Ding,Yun-Hui Cheng

MIL-100(Fe, Cr) and MIL-101(Cr) were synthesized by the hydrothermal method and applied to the adsorptions of five aromatic amines from aqueous solutions. These three metal-organic frameworks (MOFs) were well characterized by powder X-ray diffraction (PXRD), scanning electron microscope (SEM), transmission electron microscope (TEM), thermogravimetric analysis (TGA) and surface area analysis. The adsorption mechanism of three MOFs and the effects of the structures of MOFs on the adsorption of aromatic amines were discussed. The results show that the cavity system and suitable hydrogen bond acceptor were important factors for the adsorption for five aromatic amines of aniline, 1-naphthalamine, o-toluidine, 2-amino-4-nitrotoluene and 2-nitroaniline: (a) the saturated adsorption capacity of aniline, 1-naphthylamine and o-toluidine on MIL-100(Fe) were 52.0, 53.4 and 49.6 mg/g, respectively, which can be attributed to the intermolecular hydrogen bond interaction and cavity system diffusion. (b) The adsorption capacity of 2-nitroaniline and 2-amino-4-nitrotoluene on MIL-101(Cr) were 54.3 and 25.0 mg/g, respectively, which can be attributed to the more suitable pore size of MIL-101(Cr) than that of MIL-100(Fe, Cr). The MOFs of MIL-100(Fe) and MIL-101(Cr) can be potential materials for removing aromatic amines from aqueous solutions.Keywords:metal-organic framework;adsorption;aromatic amines;aniline;1-naphthalamine;o-toluidine;2-amino-4-nitrotoluene;2-nitroaniline

CAS / MDL: 100-21-0 554-95-0
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
RSC Advances · 2019 ·Vol. 9 ·期 70 ·41022-41030 · IF 3.049

Evaluation of disinfection byproduct formation from extra- and intra-cellular algal organic matters during chlorination after Fe(VI) oxidation

Feilong Dong,Qiufeng Lin,Cong Li,Tuqiao Zhang

Blue-green algae commonly bloom in fresh water in summer, producing extra- and intra-cellular algal organic matters, which are important precursors for disinfection byproduct (DBP) formation. In this study, we evaluated the effect of pre-oxidation with ferrate(VI) (FeO42−, Fe(VI)) on the characterization of intracellular organic matter (IOM) and extracellular organic matter (EOM). The results indicated that soluble microbial-like products of EOM and IOM decreased and humic acid-like products of IOM increased, which would influence the DBP formation in the subsequent chlorination step. Therefore, in this study, the effect of Fe(VI) pre-oxidation on the DBP formation from IOM and EOM with subsequent chlorination was also investigated. For Chlorella sp., EOM presented no significant change, and IOM presented a reduction of THMs (8.2%) after Fe(VI) oxidation at a dosage of 16 mg L−1. For P. limnetica, EOM and IOM both exhibited reduction of trihalomethanes (THMs) and chloral hydrate (CH) after Fe(VI) oxidation. Besides, THMs had the lowest concentration at pH 8.0 in all four solutions. Haloacetonitriles (HANs) and haloketones (HKs) showed slight changes with increasing pH values. Due to the frequent detection of bromide (Br−) in surface water, the effect of bromide existence on THM formation was also investigated. The results indicated that all brominated DBPs increased, and chlorinated DBPs decreased with the increase in bromide concentration. In addition, the bromine substitution factor (BSF) of Chlorella sp. and P. limnetica both increased with the increase in Br− concentration.

CAS / MDL: 7681-52-9
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。