LUMINESCENCE
·
2025
·Vol. 40
·期 11
·e70357
·
IF 3
Li Li,Yulu Xia,Ming Zhang
Carbon nanoparticles (CNPs) integrated with nanomaterial-based quenchers have emerged as an innovative platform for developing advanced sensing systems. In this study, we developed a novel fluorescent sensing platform for the highly sensitive detection of hydroxylamine (HA). Through a one-step hydrothermal synthesis approach, nitrogen and sulfur co-doped carbon nanoparticles (N,S-CNPs) were successfully prepared using dimethylamine hydrochloride and dimethyl sulfoxide (DMSO) as precursors. The synthesized N,S-CNPs demonstrated exceptional fluorescence properties, achieving a remarkably high quantum yield of 50%, along with outstanding water solubility, photostability, and chemical stability. The fluorescence emission of N,S-CNPs could be effectively quenched by manganese dioxide (MnO 2 ) nanosheets through a combined mechanism of inner filter effect (IFE) and static quenching effect (SQE). Notably, HA induced the redox-mediated decomposition of MnO 2 nanosheets, converting MnO 2 to Mn 2+ ions and consequently restoring the fluorescence of N,S-CNPs (turn-on response). Under optimized conditions, the proposed sensor exhibited a wide linear detection range (0.1–200 μM) with an ultra-low detection limit of 0.04 μM. The sensor demonstrated excellent analytical performance in real-world applications, successfully detecting HA in lake and river water samples with high accuracy and reliability. These findings highlight the great potential of this fluorescent sensing platform for environmental monitoring and water quality assessment.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2025
·
IF 2.8
Bozhen Wu,Xuejiao Song,Yongkang Meng,Yanghua Song,Zhongpu Shi,Yan Liu
Advances in electronic device miniaturization and system integration, alongside rapid progress in wireless communication technologies, have significantly amplified electromagnetic interference problems. This development necessitates the creation of high-performance electromagnetic shielding materials. This study presents a new design for electromagnetic shielding composites comprising an asymmetric structure of cobalt-coated nylon 6 microspheres (PA6@Co), silver nanowires (AgNWs) and poly(vinylidene fluoride) (PVDF). Specifically, PA6 microspheres were prepared using anionic reaction-induced phase separation, and cobalt was plated on their surfaces, thereby forming magnetic PA6@Co microspheres. The magnetic saturation intensity of these microspheres can reach 80 emu/g. The asymmetric PA6@Co/AgNWs/PVDF electromagnetic shielding composites with absorption-dominant characteristics were constructed using AgNWs as the conductive filler and PVDF as the matrix. The results show that within the X-band (8.2–12.4 GHz) range, the PA6@Co/AgNWs/PVDF composite material exhibits excellent electromagnetic shielding performance. Its maximum electromagnetic shielding efficiency (SET) reaches 48.1 dB, and the absorption coefficient (A) is 0.8, demonstrating a distinct absorption-dominant shielding characteristic. This asymmetric structural design strategy solves the limitations of traditional shielding materials and provides a new approach to developing environmentally friendly, efficient electromagnetic shielding materials.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2025
·
IF 6.9
Zhengyi Zhao,Yanzhi Yang,Xin Yu,Minghong Long,Zhiyong Yan,Zhonghe Xu,Xuechun Xiao
Zeolitic imidazolate framework (ZIF) address the longstanding challenge in ammonium perchlorate (AP) catalysis by simultaneously enhancing catalytic performance and heat release, owing to their high specific surface area, abundant nitrogen-rich ligands, and unique metal dispersion architecture. In this study, various metal-incorporated ZIFs were synthesized via a classical method, among which Co-ZIF exhibited optimal catalytic activity. Performance evaluations demonstrated that Co-ZIF significantly reduced the high-temperature decomposition peak by 171.4 °C (from 471.4 °C for pure AP to 300.0 °C). The activation energy ( E a ) decreased from 301.8 kJ·mol −1 to 169.9 kJ·mol −1 . Notably, the nitrogen-rich ligands within ZIFs contributed substantial heat release during AP decomposition (increasing from 888.3 J·g −1 to 2066.8 J·g −1 ). Through TG/DTG, XRD, FT-IR, and Raman analyses of the Co-ZIF + AP composite system at 280, 290, and 300 °C, we elucidated the in-situ pyrolysis process of Co-ZIF during AP thermal decomposition. The investigation confirmed the progressive decomposition of Co-ZIF and the in-situ formation of Co 3 O 4 /N-doped carbon composites, which actively participated in catalyzing AP decomposition. Based on these findings, a stage-specific catalytic mechanism was proposed, providing new insights for the application of MOF materials in AP decomposition research.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2025
·
IF 13.2
Xiaoyun Wang,Liping Luo,Dejian Chen,Rizhi Chen,Huiqin Zhang,Yangming Cheng,Xufeng Chen,Zhaoliang Cui
The low CO₂ removal efficiency of gas-blood exchange membranes posed a significant challenge of CO₂ retention in extracorporeal membrane oxygenation (ECMO). To address this, a novel strategy was pioneered through the integration of a Type III MOF-based porous liquid (UiO-66-PLs) with the biopolymer chitosan (CS) to fabricate a hemocompatible composite membrane, effectively overcoming the common issue of nanofiller agglomeration in traditional mixed-matrix membranes. A PDMS/PLs-CS mixed matrix composite membrane (MMCM) was successfully fabricated based on a PMP hollow fiber substrate. Experimental results demonstrated that the optimized CO₂/O₂ selectivity of the composite membrane reached 5.16, 2.0 times of the pristine PMP gas-blood exchange membrane. Simultaneously, the composite membrane exhibited excellent anti-blood cell adhesion and anti-protein adsorption properties (from 54.6 μg/cm 2 to 29.6 μg/cm 2 ). The material demonstrated no adverse effects on blood or tissue cells and maintained stable hydrophobicity and antifouling performance over 14 days. Crucially, blood circulation and rabbit model experiments confirmed that the composite membrane provides comparable oxygenation while delivering significantly superior CO₂ removal efficiency. This study presents the first demonstration of integrating Type III MOF-based porous liquids with biopolymers such as chitosan for fabricating hemocompatible composite membranes, offering a promising solution to enhance CO₂ clearance in ECMO applications.
✓ 已验证
产品关联
DOI
高影响因子
INORGANIC CHEMISTRY
·
2024
·
IF 4.3
Guoying Yang,Yijin Song,Songde Han,Zhen-Zhen Xue,De-Xuan Liu,Ani Wang,Guoming Wang
Assembling a heterostructure is an effective strategy for enhancing the electrocatalytic activity of hybrid materials. Herein, CoFe-layered double hydroxide and Co-metal–organic framework (CoFe-LDH/Co-MOF) hollow heterostructure nanorod arrays are synthesized. First, [Co(DIPL)(H3BTC)(H2O)2]n [named as Co-MOF, DIPL = 2,6-di(pyrid-4-yl)-4-phenylpyridine, H3BTC = 1,3,5-benzenetricarboxylic acid] crystalline materials with a uniform hollow structure were prepared on the nickel foam. The CoFe-LDH/Co-MOF composite perfectly inherits the original hollow nanorod array morphology after the subsequent electrodeposition process. Optimized CoFe-LDH/Co-MOF hollow heterostructure nanorod arrays display excellent performance in oxygen evolution reaction (OER) with ultralow overpotentials of 215 mV to deliver current densities of 10 mA cm–2 and maintain the electrocatalytic activity for a duration as long as 220 h, ranking it one of the non-noble metal-based electrocatalysts for OER. Density functional theory calculations validate the reduction in free energy for the rate-determining step by the synergistic effect of Co-MOF and CoFe-LDH, with the increased charge density and noticeable electron transfer at the Co–O site, which highlights the capability of Co-MOF to finely adjust the electronic structure and facilitate the creation of active sites. This work establishes an experimental and theoretical basis for promoting efficient water splitting through the design of heterostructures in catalysts.
✓ 已验证
DOI
PubMed
高影响因子
APPLIED SURFACE SCIENCE
·
2024
·
IF 6.3
Ying Wu,Min Li,Wenhui Fang,Yutao Cao,Shixian Xin,Hong Zhao
Electrochemical water splitting is a promising method for hydrogen production but is restricted by sluggish oxygen evolution reaction (OER), so we propose to replace OER with the thermodynamically preferred glucose oxidation reaction (GOR) to reduce the supply voltage. Herein, hollow RuV-Co(OH) 2 arrays have been fabricated by the hydrothermal method of sacrificing ZIF-67 to codope vanadium (V) and ruthenium (Ru). Electrochemical studies show that RuV-Co(OH) 2 has excellent hydrogen evolution reaction (HER) activity with a low overpotential of 77 mV at the current density of 10 mA cm −2 (η 10 = 77 mV) and good GOR activity. Density functional theory (DFT) calculations indicate that V and Ru tune the electronic structure of RuV-Co(OH) 2 , greatly increasing the density of the active sites. Moreover, RuV-Co(OH) 2 assembled glucose-assisted hydrogen evolution cell exhibits a battery voltage of 1.42 V for a current density of 10 mA cm −2 , a significant reduction of 240 mV compared to overall water splitting along with higher-value glucose oxidation products. Furthermore, RuV-Co(OH) 2 exhibits outstanding stability. Scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS) analysis demonstrate that RuV-Co(OH) 2 has superior mechanical stability. This work opens up a new approach to designing novel bifunctional electrocatalysts for energy-saving H 2 production and valuable coproductions.
✓ 已验证
DOI
高影响因子
Bioresources and Bioprocessing
·
2024
·Vol. 11
·期 1
·1-11
·
IF 4.3
Duan Suyang,Zhang Zhirong,Wang Xiaoli,Sun Yaqin,Dong Yuesheng,Ren Lina,Geng Lili,Xiu Zhilong
As an alternative to antibiotics in response to antimicrobial-resistant infections, bacteriophages (phages) are garnering renewed interest in recent years. However, the massive preparation of phage is restricted using traditional pathogens as host cells, which incurs additional costs and contamination. In this study, an opportunistic pathogen, Klebsiella pneumoniae used to convert glycerol to 1,3-propanediol (1,3-PDO), was reused to prepare phage after fermentation. The phage infection showed that the fed-batch fermentation broth containing 71.6 g/L 1,3-PDO can be directly used for preparation of phage with a titer of 1 × 10 8 pfu/mL. Then, the two-step salting-out extraction was adopted to remove most impurities, e.g. acetic acid (93.5%), ethanol (91.5%) and cells (99.4%) at the first step, and obtain 1,3-PDO (56.6%) in the top phase as well as phage (97.4%) in the middle phase at the second step. This integrated process provides a cheap and environment-friendly manner for coproduction of 1,3-PDO and phage. Graphical abstract
✓ 已验证
DOI
PubMed
高影响因子
NEW JOURNAL OF CHEMISTRY
·
2025
·
IF 2.5
Yuting Li,Dandan Wang,Yuqin Ma,Fangbin Liu,Hongji Li,Qigming Xu,Haijiao Xie
The reduction of carbon dioxide (CO2) using electrochemical methods is one of the ways to achieve carbon recycling, as the increase in carbon dioxide emissions causes environmental problems. Single-atom dispersed Ni-NC site catalysts have emerged as effective electrocatalysts for the reduction of CO2 to CO. Using ZIF-8 as a carrier, we aim to design a high-performance single nickel-site catalyst by elucidating the structure evolution of NiNx sites during thermal activation as well as other key external factors such as the carbon particle size and nickel content. The pyridine N active sites generated after calcination have higher activity and CO selectivity. The catalyst achieved up to 99.6% CO generation at −0.88 V vs. RHE, and is one of the best catalysts for the reduction of CO2 to CO. This work demonstrates an effective method for designing efficient electrochemical CO2 reduction catalysts by tuning the surface structure of single-atom anchored carriers.
✓ 已验证
产品关联
DOI
高影响因子
MEASUREMENT
·
2025
·
IF 5.6
Quanfu Li,Manli Sun,Fuqian Li,Zhencheng Chen,Xudong Luo
High sensitivity and fast response ammonia gas sensors have wide applications in chemical production, food safety, medical diagnosis, and other fields. This work innovatively utilizes phosphorus and nitrogen as co-doping elements to significantly enhance the ammonia sensing performance of graphene. Ammonia sensing tests have shown that phosphorus-nitrogen co-doped graphene (PNG) exhibits excellent ammonia sensing performance at room temperature: high response (up to 4.34% response to 0.5 ppm ammonia, more than 5 times that of graphene), ultra-low detection limit (33.9 ppb), fast response/recovery (response time ( T r e s ) and recovery time ( T r e c ) are 19 s and 36 s, respectively, which are more than 90% shorter than graphene on average). In addition, the PNG ammonia sensor also has excellent selectivity and good long-term stability. The PNG ammonia sensor studied in this paper has great potential in practical applications, especially in the detection of low concentration ammonia in exhaled breath analysis for medical diagnostics. It is expected to provide a reliable and low-cost solution for various applications of graphene ammonia sensors.
✓ 已验证
产品关联
DOI
高影响因子
RSC Advances
·
2025
·Vol. 15
·期 16
·12671-12676
·
IF 4.6
Bing Zhang,Haoqing Ma,Feng Tao,Chengsifan Lei,Lei Zhang,Chaohui He,Meng Huang
Iron/manganese-based layered transition metal oxides have emerged as competitive cathode candidates for sodium-ion batteries (SIBs) due to their high theoretical capacity and naturally abundant constituent elements. Nevertheless, implementation challenges persist due to irreversible phase transformations and substantial capacity fading during cycling. Herein, we present a novel P2-type Na0.73Fe0.2Mn0.52Co0.2Mg0.05Li0.03O2 (designated as P2-NFMO-CoMgLi) cathode material characterized by coupled cationic and anionic redox. The rational doping of Li+ into transition metal (TM) sites activates the reversible oxygen redox chemistry and suppresses the Jahn–Teller distortions. In addition, the doping of Mg2+ effectively inhibits Na+ vacancy ordering in low-voltage regimes (<2.5 V), and Co2+ incorporation concurrently improves specific capacity and stabilizes the TM–O bonding networks. Consequently, the P2-NFMO-CoMgLi cathode exhibits a high capacity of 178 mA h g−1 at 20 mA g−1 and a 68% capacity retention over 150 cycles at 200 mA g−1. Ex situ XPS characterization reveals that oxygen redox processes occur and provide extra capacity at high voltage. These findings provide a fundamental understanding of voltage-induced cation–anion redox in layered oxide cathodes, advancing the rational design of high-energy-density SIB systems.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
APPLIED SURFACE SCIENCE
·
2025
·
IF 6.9
Qingwen Zheng,Zhuo Ma,Yunfeng Qiu,Zheng Zhang,Ruiwen Wang,Shaoqin Liu
Enhancing the performance of microbial fuel cells (MFCs) for sustainable energy generation requires innovative anode designs that facilitate efficient extracellular electron transfer (EET). This study presents a biomimetic approach to anode fabrication, developing a hierarchical Co-N x doped carbon nanotube/reduced graphene oxide (ZnCo/rGO@CC) composite inspired by the EET mechanisms of c-type cytochromes. The composite leverages the synergistic effects of Co-N x active sites, mimicking heme groups, and a three-dimensional porous structure to promote bacterial colonization and electron transfer. MFCs equipped with the ZnCo/rGO@CC anode achieved a maximum power density of 3.27 W/m 2 and a startup time of 1.68 days, significantly outperforming traditional carbon cloth anodes (1.49 W/m 2 and 2.50 days, respectively). Further demonstrating its potential for sustainable waste valorization, the MFC system was successfully operated using sugarcane bagasse as a fuel source, exhibiting a power density of 1.58 W/m 2 . Electrochemical analyses and microbial community characterization confirmed enhanced EET kinetics, selective enrichment of Geobacter (79.73 %), and robust biofilm formation on the ZnCo/rGO@CC anode. This biomimetic anode design, coupled with the utilization of sugarcane bagasse, offers a promising strategy for developing sustainable and efficient bioelectrochemical systems for cleaner energy production.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2020
·
IF 7.489
Yanzhu Ye,Ying Liu,Zhongshui Li,Xiaohuan Zou,Hui Wu,Shen Lin
The Cu-In 2 O 3 /C nanocomposite was prepared by a simple solid-phase reduction method. The introduction of In 2 O 3 into Cu/C to form the Cu-In 2 O 3 /C nanocomposite evidently enhances the electrocatalytic activity for the selective reduction of CO 2 to CO. Specifically, the Cu-In 2 O 3 /C nanocomposite exhibits higher Faraday efficiency ( FE = 86.7%) at −0.48 V vs. the reversible hydrogen electrode (RHE) in the electrocatalytic reduction of CO 2 to CO and larger current densities (55 mA cm −2 ) under a low overpotential (−1.08 V vs. RHE). These indicate its superior performance over many of the reported Cu-based catalysts [1] , [2] , [3] , [4] . It was also found that by rationally adjusting the applied potential, tunable syngas can be formed, which can be used to synthesize formic acid, methyl ether, methanol, synthetic fuels, or other bulk chemicals through appropriate industrial processes. Furthermore, the Cu-In 2 O 3 /C nanocomposite maintains good stability in the electrocatalytic reduction of CO 2 . This work demonstrates a novel strategy to convert CO 2 into desired products with high energy efficiency and large current density under low overpotential by the rational designing of non-precious metal catalysts.
✓ 已验证
DOI
高影响因子