INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2025
·
IF 8.5
Shuai Qiang Jiang,Su Ping Dai,Yin Wang,Dong Ju Zhou,Ya Wei Chen,Hui Yun Zhou,Hyun Jin Park
In this study, using chitosan (CS) and β-cyclodextrin (β-CD) as raw materials, a cyclodextrin grafted chitosan (CD-g-CS) derivative was successfully synthesized. A novel CD-g-CD-SA-based thermosensitive hydrogel was developed by physical crosslinking in the existence of sodium glycerophosphate (GP) using CD-g-CS and sodium alginate (SA) as materials. The gel time of hydrogel was short, which was <5.00 min. The results of SEM showed that the hydrogel had porous reticular structures. In vitro swelling test and lysozyme degradation experiment demonstrated the good swelling and biodegradability of hydrogel. Using berberine hydrochloride (BBH) as the model drug, the hydrogel showed a slow and controlled release over 36 h and the cumulative release of 36 h was 59.87 %, which demonstrated the hydrogel had good drug release effects. The antioxidant experiments showed that hydrogel had a good antioxidant capacity. The results of the hemocompatibility test and the cytotoxicity test confirmed that the hydrogel had good biocompatibility and biosafety. In vitro antibacterial tests proved that the hydrogel had significant antibacterial effects on both Escherichia coli ( E. coli ) and Staphylococcus aureus ( S. aureus ). In summary, the CD-g-CD-SA/GP hydrogel has great potential for development in the field of biomaterials such as drug sustained release and bacteriostatic materials.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2025
·
IF 8.5
Xiyan Ding,Ma Bai,Jialun Yang,Jiaqi Li,Mengyao Wang,Xueqing Wang,Pengyue Li,Jing Wang,Miao Liu,Guangjun Huang,Lili Ma,Jinyou Duan
Photodynamic therapy (PDT) is widely recognized as an effective antimicrobial strategy that minimizes the risk of bacterial resistance. Exploiting the intrinsic properties of hydrogels to create a favorable microenvironment for wound healing, researchers integrated bismuth-based metal particles into a chitosan-polyvinyl alcohol gel matrix. Representative gel complexes after metal-gel networks (Bi-gel) and composites introduced by biomass-derived carbon (BC) immobilized by cross-linking are referred to as CP/BC@Bi. The incorporation of carbon created a dual-network that enhanced electron transfer at the Bi‑carbon heterojunction, reduced electron-hole recombination, and optimized photogenerated carrier separation and migration. In vitro experiments showed that the excessive reactive oxygen species (ROS) generated by CP/BC@Bi under visible light enhanced PDT-mediated antimicrobial efficacy, causing complete bacterial membrane disruption and biofilm inhibition. Additionally, the surface roughness and defects of CP/BC@Bi enhanced bacterial adhesion, promoting ROS-bacterial interactions and amplifying its antimicrobial effects. Notably, the inhibition rates for Escherichia coli and Staphylococcus aureus were found to be 96 % and 94 %, respectively. Biocompatibility was rigorously assessed through hemocompatibility, cytotoxicity, and post-healing tissue staining experiments, all of which confirmed the safety profile of the hydrogel. In vivo studies demonstrated that wounds treated with PDT-CP/BC@Bi exhibited significantly accelerated healing rates, substantial dermal tissue regeneration, and normalized levels of inflammatory markers. This work demonstrates the potential of the environmentally friendly, resistance-free photodynamic antimicrobial hydrogel dressing in wound healing while offering insights into optimizing Bi-based hydrogels.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Future Foods
·
2026
·
IF 8.2
Lihong Zhang,Jingxuan Wang,Jingyi Li,Tian Zheng,Meihan Meng,Chuangui Ma,Jingxin Liu
In this study, the polysaccharide from poplar sap liquid fermented by Sanghuangporus vaninii mycelium (PFP) was extracted via ultrasonic-assisted extraction and further purified using DE-52 cellulose anion-exchange resin to obtain the acidic polysaccharide fraction (APFP). Subsequently, APFP was blended with chitosan (CS) to fabricate a series of composite films with APFP concentrations of 0.25%, 0.5%, 0.75%, and 1% (W/W). Pure CS films were used as controls. The mechanical, barrier, and optical properties, microstructure, and thermal stability of the films were systematically characterized. Meanwhile, their water contact angle, particle size, zeta potential, antioxidant activity, antibacterial activity, and preservation performance for blueberries stored at room temperature were also evaluated. Compared with CS films, APFP-CS films incorporated with APFP exhibited darker color and enhanced mechanical properties. Additionally, the addition of APFP enhanced the antioxidant and antibacterial properties of the CS films. The weight loss rate, decay rate, hardness, soluble solids content, titratable acid content, malondialdehyde (MDA) content, vitamin C (VC) content, anthocyanin content, and total bacterial counts of the blueberries were measured. These results indicated that APFP incorporation could endow CS films with favorable functional properties and bioactivity, and extend the shelf life of blueberries to 15 days. Therefore, the APFP-CS composite films are a promising packaging material for food preservation.
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2026
·
IF 8.5
Jian Mu,Tianlu Dong,Fanyan Zhou,Xiao-kun Ouyang,Nan Wang
Chronic diabetic wounds pose a major clinical challenge due to impaired healing, persistent infections, and disrupted bioelectrical signaling. In this study, a multifunctional hydrogel dressing was developed by incorporating tannic acid-modified MXene (TA@MXene) into a polysaccharide dual-crosslinked network formed by oxidized alginate (OSA) and carboxymethyl chitosan (CMC). The hydrogel combines dynamic Schiff base bonds and Fe 3+ coordination, endowing it with self-healing properties and tissue-like mechanical strength. The incorporated MXene not only provides high electrical conductivity (0.55 S/m) suitable for electrical stimulation but also confers near-infrared-triggered photothermal antibacterial activity, enabling localized heating above 50 °C. In vitro assays demonstrated broad-spectrum antibacterial efficacy (> 90% inhibition) and promoted endothelial cell migration. In diabetic mouse models, the hydrogel accelerated wound closure, achieving 98% healing within 14 days, through a combination of infection control, attenuation of oxidative stress, and electrical stimulation. This work offers a promising strategy for diabetic wound management by integrating the multifunctionality of MXene with dynamic polysaccharide networks.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Biomaterials Research
·
2026
·
IF 9.6
Jingying Hu,Yongqi Xu,Danni Zhou,Kaixuan Chen,Jinwen Jiang,Min Lin,Wenjie Chen,Jing Wu,Hongde Jiang,Mengxiang Zhu,Bin Zhang,Kailei Xu,Peng Wei
Diabetic wounds represent a critical public health challenge due to impaired healing processes driven by chronic inflammation, infection, and biomechanical deficiencies. Despite advances in wound dressings and negative-pressure therapy, current treatments often fail to provide sufficient mechanical support or to fully resolve inflammatory responses, resulting in prolonged ulceration and high risk of complications. To address these limitations, a photocrosslinkable chitosan quaternary ammonium salt (CQS) derivative (methacrylated CQS [CQS-MA]) was developed to accelerate gelation and improve structural integrity. We then used ultraviolet-initiated copolymerization of CQS-MA with gelatin methacrylate (GelMA) and type I collagen to fabricate a ternary composite hydrogel encapsulating fibroblast growth factor 21 (FGF-21), termed G/C-CS@FGF-21. This composite hydrogel synergistically combined FGF-21’s early-stage inflammation-resolving activity, CQS’s sustained antimicrobial function, GelMA’s tunable mechanical resilience, and collagen’s native cell-adhesive ligands, which could promote all phases of wound repair. In vitro, G/C-CS@FGF-21 promoted macrophage polarization toward the anti-inflammatory M2 phenotype and enhanced fibroblast proliferation and migration. In a full-thickness diabetic mouse wound-healing model, treatment with G/C-CS@FGF-21 accelerated wound closure by mitigating inflammation and promoting reepithelialization and angiogenesis. These findings suggest that the G/C-CS@FGF-21 hydrogel holds strong potential for future clinical translation in diabetic wound management.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Nanotechnology
·
2018
·Vol. 2018
·期 1
·5431290
·
IF 0
Zhangxu Chen,Baorong Wu,Xiaodan Huang,Xianxue Li,Yonglong Lin
In order to biomimetic synthesize hydroxyapatite similar to natural bone. Hydroxyapatite (HAP) is biomimetic synthesized in simulated body fluid (SBF) by addition of imidazole-4,5-dicarboxylic acid grafted chitosan (IDACS). The effect of molar ratio of chitosan (CS) to imidazole-4,5-dicarboxylic acid (IDA) on preparation of HAP was investigated. The structure, size, and crystal phase of the obtained hydroxyapatite were observed by Fourier transform infrared spectroscopy, X-ray powder diffraction, and scanning electron microscopy. The results show that the molar ratio of CS to IDA is 1 : 3, the temperature is 37.0°C, the aging time is 48 h, the synthesized nanorod-like hydroxyapatite with diameter 20–30 nm, and length ranging from 75 to 120 nm presents excellent phase, which disperses well and is similar to the natural bone of HAP. The obtained HAP can be used to remove chromium(VI) by the orthogonal experiments, and the results indicated that the removal rate can reach 95.66% under the optimum conditions. These results suggest that the morphology of the obtained HAP is more affected by the material ratio of chitosan to imidazole-4,5-dicarboxylic acid than its structure, and the obtained HAP can effectively remove Cr(VI), which provides a novel method for biomimetic synthesis of other biomaterials and application in the water purification.
✓ 已验证
DOI
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2023
·
IF 8.2
Rongrong Si,Honggang Luo,Tao Zhang,Junwen Pu
Ultralight aerogels with low bulk density, highly porous nature, and functional performance have received significant focus in the field of water pollution treatment. Here, high-crystallinity, large surface-aera metal frame-work (ZIF-8) was efficiently utilized to assist in the preparation of ultralight yet highly oil and organic solvent adsorption capacity, double-network cellulose nanofibers/chitosan-based aerogels through a physical entanglement and scalable freeze-drying approach. After chemical vapor deposition with methyltrimethoxysilane, a hydrophobic surface was obtained with a water contact angle of 132.6°. The synthetic ultralight aerogel had low density (15.87 mg/cm 3 ) and high porosity (99.01 %). Moreover, the aerogel had a three-dimensional porous structure, which endowed it with high adsorption capacity (35.99 to 74.55 g/g) for organic solvent, and outstanding cyclic stability (>88 % of the adsorption capacity after 20 cycles). At the same time, aerogel removes oil from various oil/water mixtures by gravity alone and has excellent separation performance. This work holding excellent properties in terms of convenient, low-cost, scalability to manufacture environmentally friendly biomass-based materials for oily water pollution treatment.
✓ 已验证
DOI
高影响因子
JOURNAL OF MOLECULAR LIQUIDS
·
2022
·
IF 6.633
Zhi Li,Yue Zhang,Yimao Shen,Xiaodeng Yang,Tianduo Li,Guangjin Chen
Methane hydrate blockage has been a major problem to be solved urgently in the industry of petroleum and natural gas. In this work, seven chitosan derivatives with various hydrophilic/hydrophobic properties were synthesized based on the biodegradable chitosan/carboxymethyl chitosan to study the relationship between the chitosan derivatives’ molecular structures and their hydrate inhibition performance. Our experimental results indicated that the inhibitory effects of chitosan derivatives on methane hydrates were significantly better than that of carboxymethyl chitosan derivatives with similar physicochemical properties or the same functional groups at the same concentration. Moreover, the length and properties of the branched chain of the chitosan derivatives played a vital role in hydrate inhibition, and the long branched chains with hydrophobic functional groups was propitious to enhance the hydrate inhibitory performance of additives. By introducing gas-induced agitation, which created a channel for methane gas to enter the aqueous solution, the hydrate inhibition mechanism of chitosan derivatives was further revealed. The experimental phenomena indicated that the chitosan derivatives with superior hydrate inhibition effects enhanced the interfacial resistance of gas molecules migrating to the liquid phase, thus significantly reducing the gas dissolution velocities and prolonging the induction time of hydrate formation. This study verified the vital role of chitosan derivatives in inhibiting crystallized methane hydrate and provided inspiration for the further research and development of efficient and environmentally friendly kinetic inhibitors.
✓ 已验证
DOI
高影响因子
ELECTROCHIMICA ACTA
·
2013
·
IF 3.777
Lili Chai,Qunting Qu,Longfei Zhang,Ming Shen,Li Zhang,Honghe Zheng
Chitosan was applied as the electrode binder material for a spherical graphite anode in lithium-ion batteries. Compared to using poly (vinylidene fluoride) (PVDF) binder, the graphite anode using chitosan exhibited enhanced electrochemical performances in terms of the first Columbic efficiency, rate capability and cycling behavior. With similar specific capacity, the first Columbic efficiency of the chitosan-based anode is 95.4% compared to 89.3% of the PVDF-based anode. After 200 charge–discharge cycles at 0.5 C , the capacity retention of the chitosan-based electrode showed to be significantly higher than that of the PVDF-based electrode. Electrochemical impedance spectroscopy (EIS) and scanning electron microscopy (SEM) measurements were carried out to investigate the formation and evolution of the solid electrolyte interphase (SEI) formed on the graphite electrodes. The results show that a thin, homogenous and stable SEI layer is formed on the graphite electrode surface with chitosan binder compared with that using the conventional PVDF binder
研究领域:
电化学
·
材料科学
·
能源存储
·
电池技术
·
纳米材料
·
界面化学
✓ 已验证
DOI
高影响因子
CARBOHYDRATE POLYMERS
·
2015
·
IF 4.074
Hui Li,Lincai Peng
To confer cellulose fibers antimicrobial and antioxidant activities, chitosan (CS)/lignosulfonates (LS) multilayers were constructed on fibers surfaces through layer-by-layer deposition technique. The formation of CS/LS multilayers on cellulose fibers surfaces was verified by X-ray photoelectron spectroscopy (XPS) and zeta potential measurement. The surface morphologies of CS/LS multilayers on fibers surfaces were observed by atomic force microscopy (AFM). The results showed that characteristic element (i.e. N and S element) content increased with increasing bilayers number, the surface LS content increased linearly as a function of bilayers. Zeta potential of modified fibers was inversed after deposition of each layer. AFM phase images indicated that the cellulose microfibrils on fibers surfaces were gradually covered by granular LS aggregate. The antimicrobial testing results demonstrated that CS/LS multilayers modified fibers with CS in the outermost layer exhibited higher antimicrobial activity against Escherichia coli . The antioxidant testing results showed that antioxidant activity of CS/LS multilayers modified fibers was better than that of original fibers under the same oxidation conditions.
研究领域:
高分子材料
·
表面科学
·
生物医学工程
·
功能材料
·
纳米技术
✓ 已验证
DOI
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2018
·
IF 3.909
Yunbo Wu,Ye Ying,Yuhong Liu,Haijiang Zhang,Jianying Huang
Poly (vinyl alcohol) (PVA) and chitosan (CH)-based blend films were prepared via a simple mixing and casting method. The films were characterized by Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), and ultraviolet–visible spectroscopy (UV–vis). Mechanical properties, thermogravimetric (TG), derivative thermogravimetric (DTG), and the inhibition of biofilm formation against Pseudomonas aeruginosa PAO1 ( P. aeruginosa PAO1) of CH/PVA films were investigated. The results indicated that CH and PVA in the blend films interacted by physical crosslinks consisting of intermolecular hydrogen bonds and intermolecular hydrogen bonds with compatibility, and were more thermally-stable than that of PVA. CH addition decreased the tensile strength and the light transmittance. CH60:PVA40 film showed notable activity against adhesion and inhibited biofilm formation of P. aeruginosa PAO1, indicating that CH60:PVA40 film could be applied as an antimicrobial and biofilm inhibiting food packaging material .
研究领域:
生物材料学
·
微生物学
·
食品科学
·
高分子科学
·
抗菌材料
·
包装工程
✓ 已验证
DOI
高影响因子
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH
·
2023
·Vol. 30
·期 16
·47025-47037
·
IF 5.8
Wang Tianyu,Yang Lang,Rao Feng,Jiang Kaixi,Byrynnai Choduraa
Adding organics in the process of geopolymer synthesis can combine the functional groups of organics with the three-dimensional structure of geopolymer, thus changing the properties of geopolymer such as compressive strength, flexural strength, and acid resistance. In this work, excellent mechanical properties and acid resistance of metakaolin-blast furnance slag (Mk-BFS)-based geopolymer were synthesized by the incorporation of chitosan. The formation of sodium-alumino-silicate-hydrate (N-A-S–H) gel and calium-alumino-silicate-hydrate (C-A-S–H) gel in geopolymerization were characterized by 29 Si nuclear magnetic resonance (NMR). At 5% of chitosan, the compressive strength of Mk-BFS-based geopolymer could reach to 33.7 MPa. The results could be ascribed to that chitosan reacts with geopolymer to generate new C-O-Si structure meanwhile adhesion produced by the combination of positively charged cations and negatively charged ions makes the structure of geopolymer denser. After 7 days of sulfuric acid immersion, the reduction of compressive strength is less than 3 MPa, demonstrating its great acid resistance. The acid resistance of Mk-BFS-based geopolymer could attribute to that the free amino groups in chitosan preferentially react with acid solution and weakened the erosion of sulfuric acid. This study optimizes the compressive strength and acid resistance of geopolymer by adding appropriate amount of chitosan.
研究领域:
材料科学
·
硅酸盐化学
·
无机非金属材料
·
功能复合材料
·
建筑材料
✓ 已验证
DOI
高影响因子