Materials Science and Engineering B-Advanced Functional Solid-State Materials
·
2021
·
IF 4.051
Zhihao Chen,Haiyang He,Zhuoqi Wen,Zhongjie Cui,Shiliang Mei,Dan Yang,Xian Wei,Wanlu Zhang,Fengxian Xie,Bobo Yang,Ruiqian Guo
Broadband emission Mn 2+ doped lead halide perovskites are deemed as promising phosphor materials for solid state white light-emitting-diodes (WLEDs). Herein, we report a facile gram-scale synthesis of Mn-doped CsPb(Br/Cl) 3 phosphors by doping MnCl 2 into CsPbBr 3 perovskite nanocrystals at room temperature. The obtained phosphors present dual-color emission with blue emission at 463 nm and red emission at 602 nm. Increasing MnCl 2 doping amount can enhance the red emission while more 3-Aminopropyltrimethoxysilane (APTMS) ligands can repress Mn related impurity and provide high stability. Further, two kinds of WLEDs (monocomponnet and two-component) are demonstrated. The monocomponent WLED exhibits warm white light under various driving currents (30 mA–150 mA), and the two-component WLED shows good chromatic performance close to ideal white light (0.33, 0.33), demonstrating their potential applications in WLED devices.
✓ 已验证
DOI
高影响因子
Light-Science & Applications
·
2026
·Vol. 15
·期 1
·135
·
IF 24
Maimaitizi Hujiabudula,Ågren Hans,Chen Guanying
The development of pure-blue perovskite light-emitting diodes (PeLEDs) still lags behind that of green and red-emitting PeLEDs. Mixed halide (Br/Cl) perovskite nanocrystals (PeNCs) are commonly employed for blue emission but suffer from halide vacancies and ion migration. Here, we present a passivation strategy using the multifunctional fluorinated phosphonic acid molecule (1H,1H,2H,2H-heptadecafluorodec-1-yl)phosphonic acid (HFPA), which possesses active functional groups that improve the stability and electroluminescence performance of CsPb(Br/Cl) 3 NCs. The HFPA molecule is shown to interact with uncoordinated Pb 2+ on the PeNC surface through the phosphonate groups, concurrently establishing hydrogen bonds with adjacent halide ions. Moreover, the presence of fluorine atoms promotes ionic bond formation with the halide octahedra, thereby stabilizing the octahedral structure. The fabricated PeNC-LEDs exhibited a spectrally stable pure-blue emission peak at 467 nm, achieving a significantly improved external quantum efficiency (14.8%, 9-fold higher), maximum luminance (1052 cd·m -2 , 10-fold higher), and half-life (342 s, 13-fold higher) compared to the device fabricated with unmodified CsPb(Br/Cl) 3 NCs. Furthermore, the effective passivation of surface vacancies and stabilization of halogen ions by the HFPA molecules successfully suppressed ion migration in the PeNC-LEDs, thereby significantly enhancing the stability of the device.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CARBON
·
2026
·
IF 11.6
Yanan Zheng,Hao Xu,Xinyi Hou,Xuefeng Yan,Xiaohui Jiang,Liangmin Yu
Heteroatom doping, by synergistically regulating defect concentration, dielectric loss factors, and conductive behavior, enables precise tailoring of the electromagnetic response in carbon-based materials. In this study, lunar-like nitrogen (N), chlorine (Cl) co-doped porous carbon microspheres (N, Cl-PCMs) were fabricated via a hydrothermal–pyrolysis method using a self-synthesized N, Cl-containing compound as the dopant. By adjusting the doping level, controllable morphology and tunable electromagnetic responses were achieved. The heteroatoms create heterogeneous interfaces and defects that act as efficient polarization sites, thereby promoting polarization relaxation while optimizing the conductive network for improved conductive loss. Multiple attenuation mechanisms synergistically enable optimized impedance matching and efficient electromagnetic attenuation. The optimal N, Cl-PCMs-2 exhibits remarkable electromagnetic wave absorption (EMWA) performance, with a minimum reflection loss (RL min ) of −56.00 dB at 2.99 mm and an effective absorption bandwidth (EAB) widened to 5.44 GHz at 2.22 mm. Radar cross-section (RCS) simulations further demonstrated a maximum reduction of 27.45 dB m 2 at 0°, confirming its promise for multiband electromagnetic stealth. This work provides new insight into the multiscale structure of biomass-derived carbons for green, high-performance electromagnetic absorption absorbers.
✓ 已验证
产品关联
DOI
高影响因子
Catalysis Science & Technology
·
2022
·Vol. 12
·期 22
·6687-6703
·
IF 6.177
Furong Cao,Yun Wang,Xing Wang,Wenjuan Zhang,Gregory A. Solan,Rui Wang,Yanping Ma,Xiang Hao,Wen-Hua Sun
Five types of N-(2-(diphenylphosphino)ethyl)-2-R-5,6,7,8-tetrahydroquinolin-8-amines (R = H L1, Me L2, iPr L3, Cl L4, Ph L5) along with one example of an N-isopropyl-5,6,7,8-tetrahydroquinolin-8-amine (L6) have been prepared and employed as neutral ligand supports for zinc(II) chloride complexes, LZnCl2 (Zn1–Zn6). All zinc compounds were characterized by multinuclear NMR spectroscopy (1H/13C/31P) and elemental analysis, while the structures of Zn2 and Zn5 were further studied by single crystal X-ray diffraction: distorted tetrahedral geometries with the diphenylphosphine moieties non-coordinated were a feature. Pre-treatment of Zn1–Zn5 with two equivalents of either LiCH2SiMe3 or LiN(SiMe3)2 led to catalysts displaying good to exceptionally high activity for the ring opening polymerization (ROP) of ε-caprolactone (ε-CL) at 50 °C. For example, Zn4/2LiCH2SiMe3 displayed a TOF of 2.1 × 104 h−1 with 71% conversion seen within 10 minutes with the ε-CL : Zn molar ratio at 5000 : 1; the resulting polycaprolactone (PCL) comprised predominately cyclic structures along with lower levels of trimethylsilylmethyl-capped linear PCL. By comparison, Zn1–Zn5 on treatment with two equivalents of LiN(SiMe3)2 at the same high monomer to zinc ratio, led to catalysts exhibiting an order of magnitude higher activity. Zn1/2LiN(SiMe3)2 in the presence of BnOH exhibited a remarkable TOF of 1.35 × 105 h−1 with 90% monomer conversion within two minutes. In these cases, a distinct selectivity towards linear polymers capped with CH3O end-groups (derived from the quenching solvent) was observed with cyclic polyesters only observable with larger amounts of ε-CL. As a general observation, the 2-R substituent on the chelating ligand showed noticeable effects on the efficiency and on the molecular weight of the PCLs, with 2-Cl-containing Zn4 in combination with LiCH2SiMe3 and BnOH affording the highest molecular weight PCL of the study (9.57 × 104 g mol−1). Based on the microstructural properties of the PCL, distinct mechanisms (viz., coordination–insertion and ring expansion) have been proposed to account for the mode of propagation mediated by Zn/2LiCH2SiMe3 and Zn/2LiN(SiMe3)2. In addition, a zinc silylamido L1−HZn[N(SiMe3)2] (Zn7) species has been tentatively assigned (obtained via deprotonation of L1 with Zn[N(SiMe3)2]2), that proved inactive for the ROP of ε-CL but displayed good activity for ROP of rac-LA.
研究领域:
有机化学
·
高分子化学
·
材料科学
✓ 已验证
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2021
·
IF 6.707
Xiaomin Song,Qi Huang,Bo Jin,Rufang Peng
To improve the encapsulation of GO to CL-20, PEI was utilized as a linker bridge to self-assemble into composite CL-20/PEI/GO in this study. The self-assembly was in-depth characterized, including Zeta potential, SEM, DLS, XPS, Raman spectra, HPLC and power-XRD. The possible self-assembled mechanism was also proposed, which indicates the electrostatic interaction introduced by PEI should be responsible for the self-assembly. The performance of a self-assembled composite was characterized by BAM and DSC analysis. And the results indicate the enhanced interaction promotes GO more efficiently encapsulate CL-20 and improve the safety of the energetic material. Therefore, this work demonstrates a novel and facile method to solve the deprived interaction and corresponding weak desensitization between desensitizer and energetic material.
✓ 已验证
DOI
高影响因子
Inorganic Chemistry Frontiers
·
2021
·Vol. 8
·期 23
·5113-5123
·
IF 6.569
Runtian Kang,Hang Chen,Ruijie Ji,Haoyang Wang,Takatoshi Seto,Yuhua Wang
It is of great significance for white light-emitting diodes (wLEDs) to explore new, efficient and stable inorganic phosphors excited by wideband near-ultraviolet (n-UV) light. A new type of efficient emission-tunable Ce3+/Mn2+ doped Ca2YHf2Al3O12 (CYHAO) garnet phosphor which can be excited by n-UV light is studied in this work. Due to the effective energy transfer (ET) from Ce3+ to Mn2+ in CYHAO, CYHAO:0.09Ce3+,xMn2+ phosphors have a wide excitation band in the 370–470 nm region with a peak at 410 nm. Under excitation at 410 nm, all the samples show tunable color emission and match with the near UV chip. Through the decay time, it is determined that the energy transfer efficiency is as high as 88.83%. The calculated activation energy is about 0.217 eV, indicating the relatively good thermal stability. The cathodoluminescence (CL) properties show that the phosphor has a high saturation current and saturation voltage. A single component white LED is fabricated by using the CYHAO:0.09Ce3+,0.3Mn2+ phosphor and a 400 nm n-UV chip. It is worth noting that the detailed study of the energy transfer mechanism, thermal quenching mechanism and CL mechanism has reference value for the development of new co-doped phosphors.
研究领域:
材料科学
·
光学工程
✓ 已验证
DOI
高影响因子
JOURNAL OF SOLUTION CHEMISTRY
·
2026
·
IF 1.3
Xu Saiyuan,Guo Yujun,Wu Yibin,Chen Bin,Xu Yingjie
This study aims to develop and characterize a novel mixed system composed of sodium phenoxide (NaOPh) and a deep eutectic solvent (DES) formed from 1-ethyl-3-methylimidazole chloride ([Emim]Cl) and ethylene glycol (EG), in order to address the phase separation issue commonly encountered in aqueous phenoxide solutions during CO₂ absorption—caused by the generation of phenol. The physicochemical properties, CO 2 absorption performance and absorption mechanism of the NaOPh/DES mixed system were investigated. The results indicate that the density, viscosity, and CO 2 absorption capacity of the studied NaOPh/DES mixed systems increase with NaOPh content. The NaOPh1.0/DES system exhibits the best absorption performance of these systems, with a CO 2 absorption capacity of 2.10 mol‧kg −1 at 313.15 K and 0.1 MPa. DFT calculations reveal that the Na + from NaOPh, the O–H group from EG, and the Cl − from [Emim] Cl can form a stable four-membered ring. This weakens the electrostatic interaction between Na + and [PhO] − , promoting the dissociation of the NaOPh and facilitating the chemical reaction between the “free” [PhO]⁻ and CO 2 to form carbonates. This mechanism is confirmed by FT-IR and 13 C NMR spectra. Using [Emim]Cl–EG DES as a solvent to dissolve NaOPh leverages the reactivity of [PhO] − with CO 2 for efficient absorption, while effectively avoiding phase separation. This expands the application of phenoxide-based systems in CO₂ capture.
✓ 已验证
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2026
·
IF 19.7
Hongyang Zhao,Sihan Fan,Yulong Xiang,Junfeng Li,Yue Li,Xuelu Wang,Xinjuan Liu,Likun Pan
Asymmetric Ni-N-Cl sites are built by NH 4 Cl vaporization. • Ni-N-Cl overcomes the kinetic challenges and delivers excellent CO 2 reduction performance. • XAFS, DFT and CW-ODMR reveal the asymmetric coordination mechanism. • Cl coordination creates electron-rich Ni centers with shifted d-band. • Ni-N-Cl achieves 86.2% CO Faradaic efficiency and enables durable Zn-CO 2 batteries for 53 h operation. Electrocatalytic CO 2 reduction reaction to value-added chemicals represents a promising pathway for sustainable carbon utilization. However, the symmetric coordination environment of conventional M-N 4 single atom sites restricts electronic structure regulation and limits their intrinsic activity. Herein, we develop an asymmetric Ni-N-Cl coordination structure synthesized via high-temperature NH 4 Cl vaporization assisted strategy. This Cl-mediated asymmetric coordination induces a distinct charge redistribution, generates an electron enriched Ni center and an upward shift of the d-band center closer to the Fermi level. These intrinsic modulations significantly facilitate CO 2 activation and proton transfer to the *COOH, thereby lowering the reaction energy barrier. Consequently, the Ni-N-Cl catalyst achieves a CO Faradaic efficiency of 99.67% at -0.7 V vs. RHE in H cell and 17 h long term stability at -100 mA cm -2 in flow cell. Furthermore, this catalyst delivers a peak power density of 1.62 mW cm -2 and a durability of 53 h. This study provides a general methodology for the rational design of asymmetric single atom catalysts through orbital engineering for high-efficiency energy storage technologies. Download: Download high-res image (199KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
GREEN CHEMISTRY
·
2026
·
IF 10.6
Yang Li,Guoen Zhang,Chuanshun Feng,Feng Lin,Huan Ye,Wenqi Wei,Qicheng Zhang,Wenchao Peng,Xiaobin Fan
Electrocatalytic conversion of polyethylene terephthalate (PET) plastic waste into formate coupled with hydrogen generation represents a sustainable pathway for plastic upcycling. Herein, a nickel sulfide catalyst (Mo,Cl-Ni3S2) is developed for efficient and stable ethylene glycol (PET monomer) oxidation reaction (EGOR) through a Mo and Cl co-doping strategy. The optimized catalyst Mo,Cl-Ni3S2 possesses a high formate Faradaic efficiency of 94.0% at 1.55 V vs. RHE. Moreover, it maintains 83.3% of its initial activity after 95 hours continuous operation at an industrial current density of 300 mA/cm2. Experiment and theoretical simulations demonstrate Mo and Cl co-doping optimizes the electronic structure of Ni3S2 by upshifting the Ni d-band center and facilitates the in situ structure reconstruction during EGOR. Finally, an integrated acidification-precipitation-recrystallization strategy is proposed to separate and recover terephthalic acid (TPA) and potassium formate. This method offers a holistic approach for upcycling PET waste into value-added chemicals and hydrogen.
✓ 已验证
DOI
高影响因子
EUROPEAN JOURNAL OF INORGANIC CHEMISTRY
·
2020
·Vol. 2020
·期 7
·626-630
·
IF 2.529
Min Li,Guan-Cheng Xu,Wen-Bo Xin,Yin-Qiang Zhang
Graphical The new organic-inorganic hybrid compound (CH 3 NH 3 ) 4 [InCl 6 ]Cl has been successfully synthesized by reaction of methylammonium with indium(III) chloride tetrahydrate. It undergoes a first-order phase transition accompanied with an obvious step-like dielectric switching. A new organic-inorganic phase transition material (CH 3 NH 3 ) 4 [InCl 6 ]Cl ( 1 ), has been successfully synthesized and characterized. The compound undergoes a reversible first-order phase transition at Curie temperature Tc=284 K, accompanied with a wide hysteresis of 12 K, which investigated by differential scanning calorimetry (DSC). The temperature dependence of the dielectric permittivity discloses an obvious step-like dielectric anomaly. Single crystal X-ray diffraction reveals that the order-disorder transition of the [InCl 6 ] 3– anion and the methylammonium cation were the main factor drove the phase transition from high temperature phase with the space group P 2/ m to low temperature phase with the space group P 2/ n . This finding indicates that In-based organic–inorganic hybrids compounds can be used to build phase transition materials, which broaden the way for exploring dielectric switching materials.
研究领域:
材料科学
·
晶体学
·
物理化学
✓ 已验证
DOI
高影响因子
Defence Technology
·
2026
·
IF 6.4
Yanpeng Lyu,Fan Liao,Ligang Zhang,Handong Shi,Guoqiang He,Xintong Han,Jiaoyang Liu,Chuanhao Xu,Chongwei An
High energy and low sensitivity are generally mutually exclusive in energetic materials, and precise regulation of the microstructure is an effective strategy to balance these properties. In this study, CL-20/DAAF composite microspheres with various microstructures—including core-shell, hollow, porous, and irregular hollow structures—were fabricated using a tubular continuous-flow device combined with the principles of phase separation and recrystallization. The influence of the binder on the morphology and properties was also investigated. The results demonstrated that, compared with raw CL-20, the composite microspheres exhibited significantly reduced sensitivity and improved mechanical properties. Specifically, the impact energy increased from 1.75 J to 7.50 J, and the friction sensitivity threshold increased from 108 N to 168 N. The average compressive stress and compressive strain of the PBX charges were enhanced by 22.89%–108.19% and 25.75%–50.28%, respectively, with the 2.5% NC + 2.5% F 2602 composite binder delivering the optimal mechanical performance. In ignition experiments, hollow microspheres showed the highest combustion efficiency, while core-shell microspheres released energy more steadily, achieving a maximum combustion duration of 2175 ms. Theoretical calculations indicated that this composite binder system possesses a higher theoretical detonation velocity. The study confirms that adjusting the microstructure can effectively enhance the combustion and mechanical properties of composite microspheres, thereby balancing high energy with low sensitivity. The tubular continuous-flow self-assembly technology, integrated with phase separation and recrystallization principles, provides a feasible pathway for the controllable construction of composite microsphere architectures and offers a reference for the design and fabrication of other energetic composite microspheres.
✓ 已验证
产品关联
DOI
高影响因子
TRANSACTIONS OF TIANJIN UNIVERSITY
·
2022
·Vol. 29
·期 2
·110-119
·
IF 0
Zhang Zongping,Xu Jie,Zhang Dongmei,Ma Huijuan,Li Tao,Xiao Ting,Pei Cunyuan,Ni Shibing
The safe operating voltage and low volume variation of Li 3 VO 4 (LVO) make it an ideal anode material for lithium (Li)-ion batteries. However, the insufficient understanding of the inner storage mechanism hinders the design of LVO-based electrodes. Herein, we investigate, for the first time, the Li-ion storage activity in LVO via Cl doping. Moreover, N-doped C coating was simultaneously achieved in the Cl doping process, resulting in synergistically improved reaction kinetics. As a result, the as-prepared Cl-doped Li 3 VO 4 coated with N-doped C (Cl-LVO@NC) electrodes deliver a discharge capacity of 884.1 mAh/g after 200 cycles at 0.2 A/g, which is the highest among all of the LVO-based electrodes. The Cl-LVO@NC electrodes also exhibit high-capacity retention of 331.1 mAh/g at 8.0 A/g and full capacity recovery after 5 periods of rate testing over 400 cycles. After 5000 cycles at 4.0 A/g, the discharge capacity can be maintained at 423.2 mAh/g, which is superior to most LVO-based electrodes. The Li-ion storage activity in LVO via Cl doping and significant improvement in the high-rate Li-ion storage reported in this work can be used as references for the design of advanced LVO-based electrodes for high-power applications.
✓ 已验证
产品关联
DOI
危险品化学品经营许可证（带存储）