SEPARATION AND PURIFICATION TECHNOLOGY
·
2023
·
IF 8.6
Xiaojie Zhang,Kangrui Ma,Hong Peng,Yuefa Gong,Yanjun Huang
Simultaneous removal of chromium(VI) oxyanions and heavy metal cations from contaminated water body is of great significance. In this work, a novel and bifunctional sorbent, imidazolium functionalized polysulfone/DTPA-chitosan composite bead (IMPSF/DACS) was successfully constructed by phase inversion method and applied for co-removal of Cr(VI) and Cu(II) from aqueous solutions. The maximum adsorption capacities for Cr(VI) and Cu(II) on IMPSF/DACS in single system at pH 5 were 56.72 and 43.05 mg g −1 , respectively. In binary system, the removal of Cr(VI) could be further enhanced by the presence of Cu(II) due to the electrostatic shielding effect, while Cu(II) sorption was not significantly affected by the coexistence of Cr(VI). Moreover, IMPSF/DACS could simultaneously reduce low concentrations of Cu(II) and Cr(VI) in simulated contaminated lake water below the limit, while also showing good reusability in co-removal of Cr(VI) and Cu(II). The order of inhibitory effect of competing anions on Cr(VI) removal was as follows: H 2 PO 4 − < Cl − < NO 3 − < SO 4 2− , while the competing hardness cations had a little effects on the adsorption of Cu(II), implying that the Cr(VI) removal was mainly depended on the electrostatic attraction between Cr(VI) and imidazolium ions modified on IMPSF/DACS, and Cu(II) uptake was associated with chelation of DACS encapsulated in IMPSF/DACS beads. These assumptions were confirmed by XPS, FTIR and EDS-mapping techniques.
✓ 已验证
产品关联
DOI
高影响因子
Polymers
·
2022
·Vol. 14
·期 22
·4888
·
IF 4.967
Jia Qu,Hongpu Huang,Qiang Yang,Wei Gong,Meilan Li,Liangliang Chang,Baoyue Cao,Guochun Zhang,Chunsheng Zhou
Water pollution is a worldwide problem that requires urgent attention and prevention and exceeding use of heavy-metal ions is one of the most harmful factors, which poses a serious threat to human health and the ecological environment. In this work, a magnetic oxidized micro/mesoporous carbon (MOMMC) was prepared for the easy separation of Cu(II) and Pb(II) from water. The dual-template method was used to prepare micro/mesoporous carbon using sucrose as the carbon source, silica nanoparticles formed by tetraethyl orthosilicate as the microporous templates, and triblock copolymer F127 as the mesoporous template. MOMMC was obtained by oxidation using potassium persulfate and then magnetized through in situ synthesis of Fe3O4nanoparticles. FTIR, TG-DSC, XRD, TEM, SEM, nitrogen adsorption–desorption isotherms, zeta potential, and VSM were used to confirm the synthetic process, structure, and basic properties of MOMMC. The high-saturation magnetization (59.6 emu·g−1) of MOMMC indicated its easy and fast separation from water by an external magnetic field. Kinetics studies showed that the adsorption of Cu(II) and Pb(II) on MOMMC fit the pseudo-second-order model well. Isotherm studies showed that the adsorption behavior of Cu(II) was better described by the Langmuir model, and the adsorption behavior of Pb(II) was better described by both Langmuir and Redlich–Peterson models. MOMMC obtained efficient adsorption for Cu(II) and Pb(II) with the large adsorption capacity of 877.19 and 943.40 mg·g−1according to the Langmuir adsorption isotherm equation, and a better selectivity for Pb(II) was observed in competitive adsorption. MOMMC still possessed a large adsorption capacity for Cu(II) and Pb(II) after three adsorption–desorption cycles. These findings show that MOMMC represents an excellent adsorption material for the efficient removal of heavy-metal ions.Keywords:magnetic mesoporous carbon;adsorption;copper;lead;adsorption kinetics;adsorption isotherms;selectivity
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMICAL PHYSICS LETTERS
·
2022
·
IF 2.719
Tianjia Cheng,Yahui Zhang,Fengjiao Cui,Gang Jiang,Peizu Liu,Jing Guo,Kai Cui,Chen Chen,Huidong Li
A novel adsorbent (ZIF-8 cattail cellulose aerogel, ZCCA) with excellent adsorption performance was prepared using cellulose as a dispersant of ZIF-8 and applied to Cu(II) removal from wastewater. ZCCA showed an irregular network structure, which was uniformly filled with ZIF-8 particles. Its adsorption mechanism was the electrostatic attraction and chemical coordination of Cu(II). This adsorption process followed the Pseudo-second-order kinetics and the Langmuir isotherm model. The maximum adsorption capacity was 270.2 mg⋅g −1 at 303 K. In addition, the removal efficiency remained 83 % after 5 adsorption–desorption cycles. ZCCA showed outstanding adsorption performance and high potential in practical application.
✓ 已验证
产品关联
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2022
·
IF 9.136
Ying Han,Qingjie Lu,Weiwei Li,Yaping Guo,Yue Wu,Hongyuan Liu,Xiaoping Zheng,Yanhong Gao
Diclofenac (DCF) is one kind of pharmaceuticals and personal care products (PPCPs), and it is imperative to develop a green and efficient method to remove it. The removal of DCF with zinc (Zn) in the presence of Cu(II) and Co(II) were investigated on the influence factors, products, and mechanism. The results showed that with the increasing of Cu(II) and Co(II) concentrations, the reactions were accelerated. The removal rate was higher with lower pH value. In all the systems, the DCF removal rate hardly changed when the dissolved oxygen (DO) concentration was 0–8 mg·L −1 and increased at 20 mg·L −1 . Products analysis showed that the products were hydroxylated DCF (DCF 0 ) and an unknown product (DCF u ) in Zn system, monochlorinated DCF (DCF 1 ) in Zn/Cu(II) system, DCF 1 and dechlorinated DCF (DCF 2 ) in Zn/Co(II) system. The order of toxicity from highest to lowest was DCF, DCF 0 , DCF 1 , DCF 2 . The corrosion degree of zinc powder surface increased in the presence of Cu(II) and Co(II). After 48 h, ZnO formed in Zn system. In Zn/Cu(II) system, CuO and Cu 2 O formed in addition to ZnO. In the Zn/Co(II) system, Co 3 O 4 , ZnO and Zn(OH) 2 formed. After adding Cu(II) and Co(II), the corrosion currents increased. In Zn/Cu(II) system, DCF was dechlorinated to DCF 1 by catalytic hydrogenation. In Zn/Co(II) system, DCF was mainly dechlorinated to DCF 1 and DCF 2 by catalytic hydrogenation. This technique provides an alternative method for DCF removal and expands the application field of Zn reduction technology.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2019
·
IF 8.355
Qian Ye,Hao Xu,Jing Zhang,Qingguo Wang,Peng Zhou,Yunqi Wang,Xue Huang,Xiaowei Huo,Chaorong Liu,Jinfeng Lu
This work presented a new strategy to activate peroxymonosulfate (PMS) by the addition of nano-zero-valent tungsten (nZVT) via accelerating the redox cycles of Cu(II)/Cu(I), which induce the consecutive generation of highly reactive oxygen species ultimately. The oxidation capacity of the nZVT/Cu(II)/PMS process and the detailed mechanisms of PMS activation were investigated with tetracycline (TC) as the targeted pollutant. Our results indicated that about 70% TC removal was obtained in the nZVT/Cu(II)/PMS system in 15 min with an initial pH of 4.6. In addition, hydroxyl radicals ( OH), sulfate radicals (SO 4 − ), and superoxide radicals ( O 2 − ) were identified as the reactive oxygen species (ROSs) attributed to rapid TC decomposition according to the quenching studies and EPR technology. The effective component that was responsible for PMS activation and ROSs generation was ascertained to be the resulting Cu(I), which derived from the direct reduction pathway driven by epigenetic low valence tungsten species and the indirect reduction pathway driven by active hydrogen atoms. Further, the presence of Cu(II) significantly accelerated the corrosion of the nZVT powders, leading to the accumulation of low valence tungsten species and the decrease in the mean diameter of the ZVT nanoparticles. There was no obvious change of the composition and structure between the original and residual nZVT powders, as evidenced by XPS and XRD analysis. The degradation process of TC included the cleavage of specific functional groups, the ring-opening reactions and the hydroxylation process. This study provided theoretical significance in applying zero-valent metals to activate PMS through a cupric/cuprous redox cycling mechanism.
✓ 已验证
产品关联
DOI
高影响因子
CHEMOSPHERE
·
2023
·
IF 8.8
Jieli Ou,Jiewen Deng,Zhenran Wang,Yongsheng Fu,Yiqing Liu
A Cu(II)/heat coactivated peracetic acid (PAA) system for enhancing diclofenac (DCF) degradation was proposed in this work. The superiority of this synergetic activation strategy for PAA, working reactive species, catalytic mechanism and effects of reaction parameters on DCF elimination in this system were simultaneously investigated. Based on our results, the DCF loss rate in Cu(II)-heat/PAA process at pH 8.0 was about 49.3 and 4.2 times of that in Cu(II)/PAA and heat/PAA processes, respectively. Increasing the reaction temperature to 60 о C not only motivated the conversion of Cu(II) to Cu(I) but also facilitated the one-electron transfer between Cu(I) and PAA, boosting the generation of radicals. Organic radicals (mainly CH 3 C(O)O• and CH 3 C(O)OO•) were evidenced to be the core oxidizing substances dominating in the destruction of DCF while hydroxyl radical (•OH) made a minor contribution in this system by electron paramagnetic resonance (EPR) method together with scavenging experiments. This study broads the eyes into enhanced PAA activation initiated by homogenous Cu(II), providing a simple but efficient tool to degrade micropollutants .
✓ 已验证
产品关联
DOI
PubMed
高影响因子
MOLECULES
·
2023
·Vol. 28
·期 12
·4630
·
IF 4.6
Qing Li,Yumeng Guo,Xiangyi He,Guangli Li
The sensitive and accurate determination of glyphosate (Glyp) is urgently demanded because it is closely correlated with human health and environmental safety. In this work, we proposed a sensitive and convenient colorimetric assay by employing copper ion peroxidases for the detection of Glyp in the environment. Free Cu(II) ions displayed high peroxidase activity and can catalytically oxidize the colorless 3,3′,5,5′-tetramethylbenzidine (TMB) into blue oxTMB, resulting in an obviously visible discoloration reaction. Once the Glyp is added, the ability of copper ions to mimic peroxidase can be largely suppressed because of the generation of Glyp–Cu2+chelate. The favorable selectivity and sensitivity were demonstrated in the colorimetric analysis of Glyp. Furthermore, this rapid and sensitive method was successfully applied in the accurate and reliable determination of glyphosate in the real sample, holding promising applications in pesticide determination in the environment.Keywords:label-free;colorimetric analysis;copper ions;peroxidase-mimicking activity;glyphosate
✓ 已验证
产品关联
DOI
PubMed
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2023
·
IF 8.6
Ruilu Yang,Qi Zhang,Jian Shi,Yaping Zheng,Dechao Wang,Jian Zhang,Siyuan Liu,Zhuting Fu
The first example of a magnetic loading functional porous liquid (PL) by employing hollow silicon dioxide (HS) loaded with Fe 3 O 4 as the porous guest, (3-glycidyloxypropyl) trimethoxysilane (KH560) and polyetheramine M2070 as hindered sterically solvents was demonstrated in this paper. This nanoadsorbent (Fe 3 O 4 @HS-PL) was prepared for the decontamination of aqueous solutions from Cu(II) and Pb(II) heavy metals. The hindered sterically solvents ( i.e. , the flexible oligomer chains) endow the Fe 3 O 4 @HS porous guest with a superior flowing behavior at ambient temperature. Various approaches were applied to confirm the morphology, structure and properties of the resultant Fe 3 O 4 @HS-PL. More significantly, the adsorption behavior of Cu(II) and Pb(II) in aqueous solution by Fe 3 O 4 @HS-PL was studied in detail. As expected, combined with the cavity structure from porous guest and amine groups from flexible organic flow layer, Fe 3 O 4 @HS-PL exhibited excellent adsorption capacities of 322.58 and 357.14 mg·g −1 for Cu(II) and Pb(II), respectively, at 298 K, pH 8 and initial concentration of 20 mg·L -1 . The obtained HS and Fe 3 O 4 in Fe 3 O 4 @HS-PL magnetic nanoadsorbent presented average particles size ascertained to be ca. 200 nm and 30 nm, respectively. Moreover, the Freundlich model and pseudo-first-order model has described the adsorption process and adsorption kinetics . The parameters in thermodynamic experiment signified the spontaneity and endothermic properties of the adsorption. Moreover, magnetic loading endowed the Fe 3 O 4 @HS-PL with a superior regeneration performance. A variety of mechanisms containing coordination interaction, porous guest absorption, electrostatic interaction , steric effect and entropy are simultaneously realized in this novel adsorption system. Therefore, the introduction of PLs adsorbents into heavy metal adsorption systems through the construction of PLs materials by magnetic loading and surface amination is of great significance in the field of heavy metal adsorption, eventually starting a new time of pushing forward the development of novel adsorbents for decontamination of aqueous solutions from heavy metal ions.
✓ 已验证
产品关联
DOI
高影响因子
RSC Advances
·
2018
·Vol. 8
·期 61
·34877-34882
·
IF 2.936
Xue Han,Zhixin Qin,Mengyao Zhao,Jiajia Song,Fei Qu,Fengli Qu,Rong-Mei Kong
The illegal adulteration of melamine in dairy products for false protein content increase is a strong hazard to human health. Herein, a simple and sensitive colorimetric method was developed for the quantification of melamine in dairy products based on a Cu2+-hydrogen peroxide (H2O2)-3,3′,5,5′-tetramethylbenzidine (TMB) system. In this strategy, Cu2+ exhibits peroxidase-like activity and can catalyze the oxidation of TMB to oxidized TMB (oxTMB) in the presence of H2O2 with a blue colour change of the solution. However, the presence of melamine quickly interacts with H2O2 leading to the consumption of H2O2 and thus strongly hinders the oxidation of TMB. Under the optimal conditions, the absorbance change of oxTMB has a linear response to the concentration of melamine from 1 to 100 μM with a detection limit of 0.5 μM for melamine. The proposed method has many merits including more simplicity, good selectivity, and more cost-effectiveness without using any nanomaterials. The method was further successfully applied to detect melamine in dairy products including milk and infant formula powder.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CARBOHYDRATE POLYMERS
·
2018
·
IF 5.158
Jian Li,Keman Zuo,Weibing Wu,Zhaoyang Xu,Yonggang Yi,Yi Jing,Hongqi Dai,Guigan Fang
This study describes the preparation of an aerogel adsorbent based on nanofibrillated cellulose(NFC) and polyethyleneimine(PEI) via electrostatic combination without chemical crosslinking. Purely physical crosslinking between NFC and PEI was confirmed by attenuated total refraction-Fourier transform infrared spectroscopy (ATR-FTIR) and thermogravimetric analysis (TGA). The NFC/PEI hybrid aerogels exhibited good structural stability and shape recovery in water. Absorption experiment shows that the hybrid aerogels are excellent adsorbents for the removal of heavy metal ions owing to the highly porous structure and the existence of plenty of amine groups. Thermodynamic and kinetic study showed pseudo-second-order equation and Langmuir model ( R 2 > 0.999) as the best fit. The maximum adsorption capacity of Cu(II) and Pb(II) according to Langmuir model was 175.44 mg/g and 357.44 mg/g, respectively. Besides, the Cu(II) or Pb(II) loaded NFC/PEI aerogel could be easily regenerated by EDTA and retain the adsorption capacity after repeatedly using. This environmentally friendly hybrid aerogels with high-performance are promising candidates for sewage disposal and metal pollution treatment.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF HAZARDOUS MATERIALS
·
2016
·
IF 4.836
Nan Zhang,Guo-Long Zang,Chen Shi,Han-Qing Yu,Guo-Ping Sheng
This study describes the preparation of a novel adsorbent based on cellulose nanofibrils by first TEMPO mediated oxidation and then PEI grafting (TOCN-PEI) for heavy metal removal. FTIR results demonstrated the successful introduction of the adsorption functional groups (carboxyl and amino groups), and the elemental analysis and acid base titration were used to quantify the contents of these introduced groups. The kinetics curve suited the pseudo-second-order model better and the equilibrium data well fitted the Langmuir model, with the maximum Cu(II) uptake of 52.32 mg g −1 . Kinetic study showed that the PEI grafting increased the initial adsorption rate of the TOCN-PEI compared with the adsorbents without PEI. Thermodynamic study was carried out through isothermal titration calorimetry (ITC) measurement and the binding reaction was found to be exothermic and driven by enthalpy change. The adsorption process by TOCN-PEI was pH dependent, and decreasing pH would lead to desorption of Cu(II) ions, thus make the reuse of the absorbent more convenient through adsorption-desorption cycles.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CARBOHYDRATE POLYMERS
·
2015
·
IF 4.074
Jun Huang,Haihua Xie,Hui Ye,Tian Xie,Yuecheng Lin,Jinyan Gong,Chengjun Jiang,Yuanfeng Wu,Shiwang Liu,Yanli Cui,Jianwei Mao,Lehe Mei
Chitosan was prepared by N -deacetylation of squid pens β-chitin, and N -carboxyethylated chitosan ( N -CECS) with different degrees of substitution (DS) were synthesized. DS values of N -CECS derivatives calculated by 1 H nuclear magnetic resonance (NMR) spectroscopy were 0.60, 1.02 and 1.46, respectively. The adsorption capacity of Cu(II) by N -CECS correlated well with the DS and pH ranging from 3.2 to 5.8. The maximum Cu(II) adsorption capacity ( q m ) of all three N -CECS at pH 5.4 was 207.5 mg g −1 , which was 1.4-fold higher than that of chitosan. The adsorption equilibrium process was better described by the Langmuir than Freundlich isotherm model. Adsorption of Cu(II) ion onto N -CECS followed a pseudo-second order mechanism with chemisorption as the rate-limiting step. In a ternary adsorption system, the adsorption capacity of Cu(II) by N -CECS also presented high values, and q m for Cu(II), Cd(II), and Pb(II) were 150.2, 28.8, and 187.9 mg g −1 , respectively.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
危险品化学品经营许可证（带存储）