Catalysis Science & Technology
·
2025
·
IF 4.2
Xijun Li,Runze Xue,Yuan Liu,Cuijuan Zhang
Development of highly active and stable catalysts is critical for the hydrogenation of CO2 to methanol. Herein, a Cu-based catalyst was demonstrated by impregnating 20%ZnO onto the Cu–Al spinel followed by reduction. The catalyst delivers a methanol yield of 0.218 g g−1 h−1 with a CO2 conversion of 9.2% at 220 °C, 3 MPa, 6000 mL g−1 h−1, and is stable over a 300 h test. Various characterization techniques reveal that ZnO inhibits the growth of Cu nanoparticles during exsolution. Furthermore, there is strong electronic interaction between the components, i.e., the electron migrates from ZnO to the Cu–Al spinel, which leads to more oxygen vacancies and an electron-rich support and thus beneficial for CO2 hydrogenation to methanol.
✓ 已验证
产品关联
DOI
高影响因子
Nature Communications
·
2025
·Vol. 16
·期 1
·10075
·
IF 15.7
Jin Hao,Zhu Xuanqi,Zhang Mengsi,Zheng Hao,Chen Yang,Yao Dong,Liu Shuwei,Zhang Hao
Superoxide dismutase (SOD), featured with unique metal catalytic sites, is the first defense against reactive oxygen species (ROS) damage in vivo and well used in the treatment of oxidative stress-related diseases. However, the catalytic activity of natural SOD is limited by the metal ion coordination with rigid amino-acid residues. Inspired by the Cu 2+ /histidine residue coordination in Cu-Zn-SOD, in this work, the Gibbs free energy change of the break/reform of coordination bonds in the tetracoordinated structure formed by Cu 2+ and different groups in histidine is calculated, which reveals that in comparison to the Cu catalytic site coordinated with four imidazolyls, the coordination with one amino, one carboxyl and two imidazolyls possesses the lowest overall energy as well as the lowest breaking energy of one of the coordination bonds. Thus, catalytic site stability and catalytic reaction activity can be balanced sufficiently. Accordingly, the as-prepared Cu/Zn/histidine (CuZnHis) supramolecular assemblies with optimized Cu catalytic site present a significantly enhanced SOD activity up to 37900 Unit/mg, which is at least 5.4 times higher than that of natural Cu-Zn-SOD. As a proof of concept in treating oxidative stress-related diseases, the CuZnHis assemblies promote macrophage polarization from M1 to M2 phenotype and the expression of anti-inflammatory factors, and inhibit the periodontitis in male animal models.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
FOOD CHEMISTRY
·
2023
·
IF 8.8
Ya Zhang,Ying Xu,Ning Li,Xiaofang Liu,Yi Ma,SiyiYang,Huibo Luo,Changjun Hou,Danqun Huo
Here, we constructed a novel ultra-sensitive electrochemical sensor based on ZIF-67@antimonene (AMNFs) nanocomposites which are based on the first-principles density functional theory the adsorption properties of antimonene on heavy metal ions were studied for simultaneous determination of Cu 2+ , Pb 2+ and Hg 2+ . The ZIF-67@AMNFs was prepared by using ZIF-67 MOF surface loaded with a large amount of antimonene sheet. Its morphology and crystal structure were characterized by Transmission electron microscope (TEM), Energy Dispersive Spectroscopy (EDS), X-ray diffractometry (XRD) and X-ray photoelectron spectroscopy (XPS). Functional ZIF-67@AMNFs due to its unique layered structure, large active surface area, strong adsorption capacity and good electrical conductivity. In addition, the adsorption capacity of the sensor electrode for Cu 2+ , Pb 2+ and Hg 2+ was effectively enhanced. The detection limits of Cu 2+ , Pb 2+ and Hg 2+ were 0.01 pM, 0.042 pM and 0.031 pM, respectively. The determination mechanism of Cu 2+ , Pb 2+ and Hg 2+ was further clarified based on the adsorption properties and electrochemical accumulation of antimonene on metal atoms. It has been successfully applied to the simultaneous determination of Cu 2+ , Pb 2+ and Hg 2+ in rice, sorghum, corn, milk, honey and tea samples, and has good practicability.
研究领域:
食品科学
·
材料科学
·
分析化学
✓ 已验证
DOI
PubMed
高影响因子
Journal of Materials Chemistry C
·
2021
·Vol. 9
·期 27
·8537-8544
·
IF 7.393
Zhongyuan Guan,Haihang Ye,Peiwen Lv,Lijin Wang,Jing Zhang,Bin Zou,Aiwei Tang
Multinary Cu-based chalcogenide nanocrystals (NCs) are excellent candidates for optoelectronic applications, but their growth mechanism and its impacts on the NCs’ optical properties remain controversial. Herein, we employed a simple colloidal chemistry method for the growth of multinary Cu-based NCs including ternary Cu–In–S NCs, quaternary Cu–In–Se–S NCs, and five-component Cu–In–Zn–Se–S NCs, to explore their growth mechanism and investigate their optical properties. It is found that the ternary Cu–In–S NCs contain a large number of copper vacancies, which affect the major acceptor level for the exciton recombination. With the high reaction activity of Se, the quaternary Cu–In–Se–S NCs form at low reaction temperature and have a red-shift of the photoluminescence (PL) maximum due to the recombination from the conduction band to the acceptor level. The formation process of five-component Cu–In–Zn–Se–S NCs highly depends on the Zn amount, which shows a competitive relationship between the NCs’ growth and diffusion of Zn, leading to the red- and blue-shift of PL maximum, respectively. Our study provides a clear map for the growth of multinary Cu-based NCs and shows their impacts on optical properties.
✓ 已验证
产品关联
DOI
高影响因子
Catalysts
·
2024
·Vol. 14
·期 8
·496
·
IF 3.8
Kaige Zhao,Xinhao Xu,Manli Wang,Tao Chen,Qianlin Ju,Lulu Hao,Zelin Chen,Xiaolong Yu,Changjiu Li
The electrocatalytic oxidation of urea combined with wastewater splitting is considered a promising approach for sustainable hydrogen production, characterized by minimal energy consumption. However, its evolution is greatly hindered by the shortage of efficient and easily accessible electrocatalytic materials. Here, a facile electrochemical activation strategy was conceived and proposed to construct a Cu-doped NiOOH nanolayer encapsulated on Cu2O nanodendrites on Cu mesh substrate (Cu-NiOOH/Cu2O/CM) from the electrodeposited Ni/Cu2O/CM heterostructured precatalyst. It was verified that the incorporation of Cu not only facilitates the rapid formation of Ni(III)species but also contributes to the formation of Cu-Ni(III)bifunctional electrocatalytic active sites. Benefiting from the accessible Cu-Ni(III)dual active sites, high active surface area, good hydrophilic and aerophobic surface properties and superior electrical conductivity of the Cu mesh substrate, the as-prepared Cu-NiOOH/Cu2O/CM exhibits enhanced bifunctional electrocatalytic abilities for electrocatalytic urea oxidation reaction (UOR) and hydrogen evolution reaction (HER). Particularly, for the Cu-NiOOH/Cu2O/CM||Cu-NiOOH/Cu2O/CM configuration toward the UOR||HER coupled system, a significantly reduced cell voltage of 1.43 V vs. RHE @ 10 mA·cm−2was obtained. The observed cell voltage for the conventional overall water splitting is approximately 190 mV higher than that observed for overall urea splitting. This study proposes a viable approach to achieve and optimize the bifunctional UOR/HER performance of NiOOH active species, which holds significant importance for efficient and stable hydrogen generation from urea-contaminated substandard water.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2026
·
IF 19.7
Zichen Song,Wenqian Wang,Jiantao Fu,Xiangbo Ma,Xiaolei Wang,Guiling Wang,Zhiyu Ren,Honggang Fu
Ligand-directed inheritance creates asymmetric Cu–N/Cu–O motifs for CO 2 reduction. • Symmetry-breaking preserves highly active Cu δ+ interfaces under dynamic conditions. • Dual-mode *CO adsorption (atop/bridge) effectively bypasses C 2+ scaling laws. • Optimized sites lower C–C coupling barriers while poisoning hydrogen evolution. • Achieved 82.2% C 2+ FE at 0.9 A cm −2 with stable 50 h ampere-scale electrolysis. The electrochemical CO 2 reduction reaction (ECR) to multi-carbon (C 2+ ) chemicals is intrinsically hindered by the rigid scaling relations and geometric homogeneity of pristine copper surfaces, which enforce a singular atop-type *CO intermediate. Herein, we implement a ligand-directed motif inheritance strategy to synthesize nitrogen-doped CuO (N-CuO) nanoparticles, uniquely characterized by asymmetric Cu–N/Cu–O lattice motifs. Under severe cathodic polarization, these robust Cu–N bonds structurally modulate the metallic reconstruction, preserving local non-metal coordination to sustain a highly active, mixed-valence Cu δ+ species. Operando spectroscopic and theoretical analyses reveal that this local structural asymmetry disrupts adsorption homogeneity, explicitly driving the spatial co-adsorption of bridge- and atop-type *CO intermediates. This dual-mode configuration bypasses conventional kinetic bottlenecks to drastically accelerate C–C dimerization. Consequently, the N-CuO catalyst delivers a record-level C 2+ Faradaic efficiency of 82.2% at an industrially relevant current density of 0.9 A cm −2 , exhibiting exceptional structural and catalytic stability over 50 h of continuous flow-cell operation. This work establishes atomic-scale lattice asymmetry as a decisive design principle for stabilizing active Cu δ+ species and steering multi-carbon electrosynthesis at practical reaction rates. Download: Download high-res image (301KB) Download: Download full-size image A ligand-directed motif inheritance strategy is developed to precisely integrate asymmetric Cu–N/Cu–O motifs within the CuO lattice. This local structural asymmetry enforces the *CO atop /*CO bridge dual-mode co-adsorption, bypassing conventional scaling relations to lower the C–C coupling barrier while suppressing HER. The catalyst delivers a state-of-the-art C 2+ Faradaic efficiency of 82.2% at an industrially relevant 0.9 A cm −2 .
✓ 已验证
产品关联
DOI
高影响因子
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
·
2025
·
IF 3.9
Hongzhao Song,Rong Chen,Qin Yang,Junping Ma,Lijun Chen,Yumei Huang
Designing and fabricating hydrogel supercapacitors (SCs) with ultrahigh energy and power densities and multienvironmental adaptability remains challenging due to the inherent conflict between “ion transport kinetics” and “charge storage capacity.” Herein, a metal phenolic network was formed using lignin catalyzed by Cu2+ ions and reinforced with phytic acid (PA)-cross-linked poly(acrylic acid) to develop a hydrogel electrolyte with homogeneous ion diffusion channels. Then, a polyaniline (PANI) electrode layer was grown in situ on the surface of the electrolyte to construct an integrated hydrogel SC with ultrahigh energy and power densities (the maximum energy and power densities were 1027.91 μWh cm–2 and 3002.42 μW cm–2, respectively, at a current density of 2 mA cm–2, and the capacitance retention ratio was 95.6% after 5000 cycles). Phytate-chelated Cu2+ ions undergoes redox competition with lignin, producing Cu+ ions with low electrostatic binding. These ions can then act synergistically with H+ ions to magnify the system’s charge storage capacity. Additionally, abundant hydrogen bonding and electrostatic interactions provide the PANI conductive layer with more charge adsorption sites whereas the uniform network structure provides optimal ion diffusion channels. Furthermore, the capacitor exhibits favorable capacitance output across various temperatures and humidity levels. Notably, the pigskin covered by this SC exhibits excellent flame-retardant properties when exposed to a butane flame, with a surface temperature of 34.8 °C. This work advances the practical application of hydrogel SCs for flexible energy storage.
✓ 已验证
产品关联
DOI
高影响因子
Nanoscale
·
2016
·Vol. 8
·期 22
·11602-11610
·
IF 7.76
Deqian Zeng,Pingyun Gong,Yuanzhi Chen,Qinfu Zhang,Qingshui Xie,Dong-Liang Peng
Metal–semiconductor hybrid nanocrystals have received extensive attention owing to their multiple functionalities which can find wide technological applications. The utilization of low-cost non-noble metals to construct novel metal–semiconductor hybrid nanocrystals is important and meaningful for their large-scale applications. In this study, a facile solution approach is developed for the synthesis of Cu–ZnO hybrid nanocrystals with well-controlled morphologies, including nanomultipods, core–shell nanoparticles, nanopyramids and core–shell nanowires. In the synthetic strategy, Cu nanocrystals formed in situ serve as seeds for the heterogeneous nucleation and growth of ZnO, and it eventually forms various Cu–ZnO hetero-nanostructures under different reaction conditions. These hybrid nanocrystals possess well-defined and stable heterostructure junctions. The ultraviolet-visible-near infrared spectra reveal morphology-dependent surface plasmon resonance absorption of Cu and the band gap absorption of ZnO. Furthermore, we construct a novel Cu@CuNi–ZnO ternary hetero-nanostructure by incorporating the magnetic metal Ni into the pre-synthesized colloidal Cu nanocrystals. Such hybrid nanocrystals possess a magnetic Cu–Ni intermediate layer between the ZnO shell and the Cu core, and exhibit ferromagnetic/superparamagnetic properties which expand their functionalities. Finally, enhanced photocatalytic activities are observed in the as-prepared non-noble metal–ZnO hybrid nanocrystals. This study not only provides an economical way to prepare high-quality morphology-controlled Cu–ZnO hybrid nanocrystals for potential applications in the fields of photocatalysis and photovoltaic devices, but also opens up new opportunities in designing ternary non-noble metal–semiconductor hybrid nanocrystals with multifunctionalities.
研究领域:
材料科学
·
纳米技术
·
化学工程
✓ 已验证
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2023
·
IF 6.7
Mingji Xu,Xi Ran,Ruoli Chen,Maoshen Chen,Ruijuan Qi,Chengqin Dai,Chunhua Luo,Hui Peng,Hechun Lin
Gas sensors based on metal/metal oxide heterostructures have shown rapid advancements due to their excellent sensing performance. However, it is difficult to control the formation of Cu/CuO nanostructure due to the easy oxidation of copper and limits its sensing application. Herein, we reported the controlled oxidation of Cu superfine particles (SPs) to form Cu/CuO nanostructure via reducing CuO with monoethanolamine, oxidized with H 2 O 2 and then in-situ annealed at 250 °C. The organic residue generated during the reducing step plays a key role in controlling the oxidation of Cu SPs to form Cu/CuO nanostructure. The nanomaterial was used to fabricate gas sensor, which presents excellent p-type sensing performance to ethanol with good selectivity and a good linear relationship in the range of 1 to 100 ppm ethanol. The response to 100 ppm ethanol can be up to 99.40 under 200 °C operating temperature, and the response under 250 °C is 30.66 with the shorter response and recovery time of 214 s and 74 s, respectively. The sensing mechanism can be explained by the adsorption–desorption model. This study provides a promising strategy for the synthesis of Cu/CuO nanostructure and open a new avenue for the development of highly sensitive ethanol sensor.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2022
·
IF 16.744
Jingang Wang,Jianbo Zhang,Cheng Xing,Taosheng Jin,Jinpeng Liu,Meiting Ju,Xuejiao Tang
Phosphorus (P) poisoning of NH 3 -SCR catalysts is inevitable in application of NO x abatement of diesel exhaust. The distinct effects on Cu-SSZ-13 of P from different precursors (H 3 PO 4 and (NH 4 ) 2 HPO 4 ) were figured out and the mechanism was further investigated. P-poisoned Cu-SSZ-13 (Si/Al = 6) catalysts were prepared and characterized using N 2 adsorption, X-ray powder diffraction (XRD), scanning electron microscope with energy-dispersive X-ray spectroscopy mapping (SEM-EDX), ammonia temperature-programmed desorption (NH 3 -TPD), X-ray photoelectron spectroscopy (XPS), hydrogen temperature programmed reduction (H 2 -TPR), electron paramagnetic resonance (EPR) and 27 Al solid-state magic angle spinning nuclear magnetic resonance spectroscopies ( 27 Al NMR). Significant enhancement of high-temperature activities (400–600 °C) were observed for the catalysts with P loading of 0.3–0.9 wt%, since the appropriate incorporation enabled to bind P atoms to CuO x in remained framework. However, the high P content of 1.5 wt% resulted in a detrimental effect on framework to induce the accumulation of Cu species. Interestingly, the dominant P from H 3 PO 4 was inclined to directly attack the framework Al leading to more severe dealumination, while the P from (NH 4 ) 2 HPO 4 interacted with Cu 2+ to form copper phosphate with more Cu 2+ migrating to the surface of the catalyst which promoted the NO x conversation at each active site resulting in the low-temperature catalytic activity unchanged. So, control of the P/Cu and form of P is capable of preventing P poisoning and unlocks the potential of Cu-SSZ-13 in exhaust treatment.
✓ 已验证
产品关联
DOI
高影响因子
CHINESE JOURNAL OF CHEMICAL ENGINEERING
·
2022
·
IF 3.898
Hongbin Shi,Qing Liu,Xiaofeng Dai,Teng Zhang,Yuling Shi,Tao Wang
The bimetallic nanoparticles compositing of Ni-rich core and Cu-rich shell (Ni/Cu NPs) were successfully synthesized by a liquid-phase thermal decomposition method. The content of copper and nickel in Ni/Cu NPs was controllable by adjusting the ratio of two metal precursors, copper formate (Cuf) and nickel acetate tetrahydrate (Ni(OAc) 2 ∙4H 2 O). Ni/Cu NPs were further anchored on graphene oxide (GO) to prepare a magnetic composite catalyst, called Ni/Cu-GO. The dispersibility of Ni/Cu NPs in solution was enhanced by GO anchoring to prevent the sintering and aggregation during the reaction process, thereby ensuring the catalytic and cycling performance of the catalyst. The catalytic transfer hydrogenation (CTH) reaction of nitroaromatics was investigated when ammonia borane was used as the hydrogen source. Cu dominated the main catalytic role in the reaction, while Ni played a synergistic role of catalysis and providing magnetic properties for separation. The Ni 7 /Cu 3 -GO catalyst exhibited the best catalytic performance with the conversion and yield of 99% and 96%, respectively, when 2-methyl-5-nitrophenol was used as the substrate. The Ni 7 /Cu 3 -GO catalyst also exhibited excellent cyclic catalytic performance with the 5-amino-2-methylphenol yield of above 90% after six cycles. In addition, the Ni 7 /Cu 3 -GO catalyst could be quickly recycled by magnetic separation. Moreover, the Ni 7 /Cu 3 -GO catalyst showed good catalytic performance for halogen-containing nitroaromatics without dehalogenation.
✓ 已验证
产品关联
DOI
高影响因子
Nanomaterials
·
2020
·Vol. 10
·期 3
·509
·
IF 4.324
Shuzhen Zhou,Lihua Kang,Xuening Zhou,Zhu Xu,Mingyuan Zhu
Ethylene is an important chemical raw material and with the increasing consumption of petroleum resources, the production of ethylene through the calcium carbide acetylene route has important research significance. In this work, a series of bimetallic catalysts with different Cu/Ni molar ratios are prepared by co-impregnation method for the hydrogenation of calcium carbide acetylene to ethylene. The introduction of an appropriate amount of Cu effectively inhibits not only the formation of ethane and green oil, thus increasing the selectivity of ethylene, but also the formation of carbon deposits, which improves the stability of the catalyst. The ethylene selectivity of the Ni–Cu bimetallic catalyst increases from 45% to 63% compared with the Ni monometallic counterpart and the acetylene conversion still can reach 100% at the optimal conditions of 250 °C, 8000 mL·g−1·h−1and V(H2)/V(C2H2) = 3. X-ray diffraction and transmission electron microscopy confirmed that the metal particles were highly dispersed on the support, High-resolution transmission electron microscopy and H2-Temperature programmed reduction proved that there was an interaction between Ni and Cu, combined with X-ray photoelectron spectroscopy and density functional theory calculations results, Cu transferred electrons to Ni changed the Ni electron cloud density in NiCuxcatalysts, thus reducing the adsorption of acetylene and ethylene, which is favorable to ethylene selectivity.Keywords:Ni–Cu;calcium carbide acetylene;selective hydrogenation;ethylene
✓ 已验证
产品关联
DOI
PubMed
高影响因子
危险品化学品经营许可证（带存储）