ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH
·
2024
·Vol. 31
·期 29
·42075-42087
·
IF 0
Zhang Qian,Lan Xin-yue,Huang Zhi,Liu Yan-ying,Hong Jun-ming
Highly active catalysts with salt and acid/alkali resistance are desired in peroxymonosulfate (PMS) activation processes and marine environment applications. F- and Cl-doped graphene (F-GN and Cl-GN) were prepared via electronegative and atom radius adjustment for tetracycline hydrochloride (TCH) pollution removal to satisfy these requirements. The introduction of special F and Cl functionalities into graphene exhibits superior electron transfer properties for PMS activation, considering the experimental and density functional theory (DFT) calculation results. The TCH degradation efficiency reached up to 80% under various pH and salt disturbance conditions with F-GN and Cl-GN. Cl-GN exhibited an activity superior to F-GN due to the higher electron polarization effect of C atoms adjacent to Cl atoms. The presence of more positive charged C sites in Cl-GN (around Cl doping) is more favorable for PMS attachment and sequence radical generation than F-GN. In addition, the main active species functionalized during reaction included ·OH and SO 4 − ·, and the stability of F-GN and Cl-GN was confirmed to be over 60% by recycle test. Final research results provide an effective strategy for designing and preparing PMS activators resistant to salt, acid, and alkali, thereby expanding their application potential.
✓ 已验证
产品关联
DOI
PubMed
Journal of Water Process Engineering
·
2024
·
IF 6.3
Yanan Liu,Guangyan Wang,Shuaishuai Lu,Siqi Wang,Peijuan Jiang,Huan Chen,Fang Jiang
Pollution caused by per - and polyfluoroalkyl substances (PFASs) has raised global health concerns and there is an urgent need for researchers to find effective treatment methods. The covalent triazine framework (CTF) adsorbent materials with different structures based on various precursors using the ionothermal method were prepared and characterized in this study. Among them, F-doped CTF (F-CTF) is favorable for effective mass transfer in the adsorption process due to its rich microporous structure and large specific surface area. The maximum adsorption capacity (q max ) for PFOA reached 769.2 mg/g under the synergistic effect of electrostatic force and the interaction of F F. After six cycles of adsorption-desorption experiments, the adsorption and desorption rates of the F-CTF 400°C were stable at >90 %. This result indicates that F-CTF 400°C possesses high stability and recyclability. Furthermore, the desorption solution containing a high concentration of PFOA was treated directly by a UV/Na 2 SO 3 system, utilizing the e aq − within the system to decompose PFOA. The reduction and defluorination efficiencies for the desorption solution with high concentrations of PFOA reached 90 % and 40 %, respectively. The study results indicate that by leveraging the high adsorption selectivity and stable recoverability of F-CTF 400°C , the UV/Na 2 SO 3 system can completely remove PFOA. This approach offers a novel solution for the elimination of PFOA pollution in the environment.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MEMBRANE SCIENCE
·
2024
·
IF 8.4
Shaojin Jia,Sha Yang,Yu Pan,Salah Ud Din,Yuanjie Cai
As an important part of the fields such as renewable energy and electric vehicles, electrochemical energy storage technology faces significant challenges in improving energy density , extending battery life and improving safety. We successfully prepared a composite battery separator of polyvinylidene fluoride-chlorotrifluorinylene (PVDF-CTFE) and fluorinated polyimide (F-PI) -based materials, mixed it with different contents of boehmite nanoparticles , and then modified it by different doses of electron beam irradiation to improve the performance, especially to overcome the problem of maintaining capacity decline in high-speed charging environment. The results showed that the prepared battery separators exhibited outstanding thermal stability, electrochemical properties and ionic conductivity with 12 % boehmite nanoparticles . After 1000 high-speed charge and discharge cycles in current density of 10C, the battery based on the modified separator still maintained a capacity retention rate of 84.4 %, with the initial discharge specific capacity of 111.9 mAhg −1 . This means that irradiated separators not only maintain a high energy density in a high-speed charging environment, but also overcome the problem of maintaining capacity decline. Electron beam irradiation further improved the comprehensive performance of the separator. After 1000 and 1500 cycles at the current density of 10C and 15C, the specific discharge capacity of the battery can still retain more than 90 % and 80 % of the initial specific discharge capacity, which provides a longer life in practical applications.
✓ 已验证
产品关联
DOI
高影响因子
VACUUM
·
2024
·
IF 3.8
Zuhong Ji,Yunfei Sun,Xiaodong Guan,Yang Zhou,Junchao Qian,Feng Chen
In this work, the La substitution of iron and replacing the oxygen with fluorine are both adopted to expectantly enhance the rate performance and structure stability of LiFePO 4 during working. The characterizations of X-ray diffraction, scanning electron microscope , transmission electron microscope, charging-discharging tests, electrochemical impedance spectroscopy and safety tests are used to investigate the influences of La 3+ and F − doping on the LiFePO 4 . The results indicate the cathodes after La 3+ doping not only deliver the larger lattice parameters and unit cell volume to broaden the lithium ions migration pathway and accelerate the Li + diffusion speed, but also strengthen the whole bond energy of LiFePO 4 owing to the high bond energy of La–O. In addition, the F replacement of O could increase the length of Li–O bonds and decrease the length of P–O bonds, further be helpful to enhance the Li + diffusion between LiFePO 4 phase and FePO 4 phase due to the weakening of Li–O bonds. Finally, the La 3+ and F − co-doped cathode delivers the superior discharge capacity of 139.3 mAh g −1 at 5C high rate and 127.2 mAh g −1 at −20 °C, with the high discharging capacity of 160.1 mAh g −1 after 100 cycles at 45 °C.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Materials Chemistry C
·
2024
·
IF 5.7
Jinwen Tan,Han Luo,Shiyi Wang,Ling Huang,Liling Cao,Xuehua Dong,Guohong Zou
A short-wave UV antimony(III) oxysalt, RbSb(SO4)(H2PO2)F, by incorporating three different anions (SO42-, H2PO2-, F-) with trivalent antimony cations that possess stereochemically active lone-pair electrons (SCALP), has been successfully synthesized. Significantly, the mixed anions and Sb3+ cations combine to form a low-dimensional 1D infinite anionic chain, denoted as [Sb(SO4)(H2PO2)F]∞-, where synergistic interactions among these units contribute to a substantial birefringence of 0.192 at 546 nm and achieve a short cutoff edge down to 276 nm. This research expands the family of UV birefringent optical materials and provides guidance for the further exploration of novel structural-functional materials.
✓ 已验证
产品关联
DOI
高影响因子
Small
·
2025
·
IF 12.1
Qian Kong,Chengcheng Yu,Qing Lu,Xingyu Yang,Tongguang Xu,Qi Song,Huatong Li,Zhaoshuo Yuan,Hongyu Liu,Qian Qiao,Gang He,Yufan Wang,Linglong Yao,Xiaoping Dai,Xin Zhang
The electrolysis of water for hydrogen production has gained increasing attention as a sustainable and efficient method to obtain high-purity green hydrogen. The development of efficient catalysts for hydrogen evolution is crucial in order to achieve this target under industrial conditions. The objective of this work is to synthesize a highly efficient F-Co x Fe y (PO n ) z /IF catalyst with ultra-low impedance for hydrogen evolution in electrolytic water by incorporating metal phosphatides into metal oxide nanoclusters through a controlled two-step process involving melting and electrodeposition. The nano-heterostructure of F-Co x Fe y (PO n ) z /IF exhibits a low overpotential of 276 mV at a current density of 1000 mA cm −1 , while having an electrochemical impedance comparable to commercial Pt/C/CP (0.41 Ω), and long-term stability up to 200 h in 1 M KOH electrolyte. The synergistic effect of crystal/amorphous heterojunctions, F doping, and oxygen vacancies further enhances the kinetics of water cracking. Impressively, when combined with NiFeCo LDH/NiS/NF as membrane electrodes, F-Co x Fe y (PO n ) z /IF || NiFeCo LDH/NiS/NF achieves a water decomposition voltage of 2.03 V at a current density of 1000 mA cm −2 and demonstrates stable operation for over 500 h, showing great potential for large-scale commercial production.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Synthetic Biology
·
2025
·
IF 3.9
Jing Wu,Ziqian Xiao,Yuhui Du,Minglan Luo,Jiacheng Zhang,Pei Guo,Zhipeng Chen,Binyuan Yang,Tingjian Chen
Aptamer-based sensors (aptasensors) have been extensively employed in biosensing and diagnostics. However, the broader application of aptasensors fabricated with DNA and RNA aptamers has been limited due to the intolerance of DNA and RNA to nucleases in biological fluids. A majority of sugar-modified nucleic acids, in particular 2’-F and 2’-OMe-modified nucleic acids, demonstrate a remarkable resistance to nuclease degradation and thus hold great potential in the development of more stable aptamers and aptasensors. In this work, employing enzymes including a laboratory-evolved polymerase for 2’-modified nucleic acids, we carried out systematic evolution of ligands by exponential enrichment (SELEX) experiments to obtain 2’-F/OMe-RNA aptamers for Bacillus cereus 5/B/6 metallo-β-lactamase (B. cereus 5/B/6 MBL), a crucial marker of many penicillin-resistant strains. Three aptamers composed of 2’-OMe-A, 2’-F-U, 2’-F-C, and 2’-OMe-G nucleotides (Apt-FUC1, Apt-FUC2, and Apt-FUC3) have been obtained and systematically characterized. All of them exhibited excellent target binding affinities, with equilibrium dissociation constant (Kd ) values of 95.9, 70.0, and 81.3 nM, and outstanding biological stability. Combining FAM-labeled Apt-FUC1, Apt-FUC2, and Apt-FUC3 with graphene oxide (GO), which could quench the fluorescence of FAM, we successfully constructed three sensitive and biologically stable 2’-F/OMe-RNA aptasensors for B. cereus 5/B/6 MBL, with the limit of detection (LOD) values of 0.38, 0.27, and 0.29 nM. Moreover, these three aptasensors all demonstrated good specificity for target detection in biological samples. This work has established a streamlined strategy for generating stable 2’-F/OMe-RNA aptamers and aptasensors, which should broaden the application of sugar-modified nucleic acids in biosensing and diagnostics.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
EMBO REPORTS
·
2025
·
IF 6.2
LiYuanyuan,ChengShuyang,JinXu,WuRuoxuan,GuoYiyi,WuDezhi,DongJie
Plants have evolved intricate strategies to cope with various abiotic stresses. Ubiquitin-mediated protein degradation plays a key role in plant development as well as abiotic stress tolerance. In this study, we identify LAO1, an F-box protein with unknown function, as a negative regulator of plant fitness during nitrogen starvation. DOMINANT SUPPRESSOR OF KAR 2 (DSK2) interacts with and mediates the autophagic degradation of LAO1 protein during nitrogen starvation. The loss of LAO1 improves the fitness of an autophagy-deficient mutant, atg5-1, under nitrogen starvation. Intriguingly, mutations in DSK2 facilitate rather than reduce plant growth after nitrogen starvation. This unexpected effect of DSK2 knockout led us to discover that DSK2 also interacts with and degrades a group of class I TCP transcription factors. Phenotypic observations demonstrate that class I TCPs are crucial for plant adaptation to nitrogen starvation. Moreover, genetic analyses indicate that class I TCPs function downstream of LAO1 and counteract its negative effects. Collectively, our findings unveil a previously undescribed regulatory network governing plant fitness during nitrogen starvation.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Inorganic Chemistry Frontiers
·
2025
·
IF 6.4
Yurong Wu,Ziyun Zhang,Jiangshan Huo,Runguo Zheng,Zhishuang Song,Zhiyuan Wang,Yanguo Liu,Dan Wang
P2-type layered oxides have emerged as promising cathode candidate materials for potassium-ion batteries. Nevertheless, unsatisfactory cycling stability hinders their practical application, chiefly arising from deleterious phase transitions and the Jahn–Teller distortion of Mn3+. Herein, an anion-doping strategy where F− is incorporated into P2-K0.6Zn0.1Ti0.05Al0.05Mn0.8O2 (KTMO) cathode materials is proposed. Raman spectroscopy was employed to investigate the local chemical environment of these materials. The results revealed a slight shift to higher wavenumbers in the Eg and A1g peaks, which was ascribed to the shortening of the average TM–O bond length triggered by the addition of F. Ex situ XRD analysis revealed that the material K0.6Zn0.1Ti0.05Al0.05Mn0.8O1.93F0.07 effectively suppresses undesirable phase transitions. Moreover, the maximum variation in the lattice parameter c is only 2.2% during potassium insertion/extraction, which fully demonstrates the outstanding performance of this material in terms of structural stability. This strategy brings about excellent cycling stability with a reversible capacity of 131.8 mA h g−1 and capacity retention of 76.8% after 100 cycles, within a voltage range of 2.0–4.0 V. These findings offer novel insights into the design of cathode materials possessing optimized structures and enhanced performance for potassium-ion batteries.
✓ 已验证
产品关联
DOI
高影响因子
CANADIAN JOURNAL OF CHEMICAL ENGINEERING
·
2025
·
IF 1.9
Xudong Wang,Yanyang Wu,Tianyou Wang,Bin Wu,Kui Chen,Lijun Ji
M-cresol and p-cresol, typically produced as mixtures in industrial processes, are crucial chemical intermediates. However, their separation is challenging due to their similar structures and properties. ZSM-5 zeolite has shown potential as an adsorbent for separation, while the performance is yet to be improved. In this study, ZSM-5-F(x) was synthesized via hydrothermal method, incorporating F − ions during the synthesis process. The adsorption behaviour of m-cresol and p-cresol on ZSM-5-F(x) was investigated through static experiments, with ZSM-5-F(8) demonstrating the highest selectivity (9.01). Both ZSM-5-F(0) and ZSM-5-F(8) were characterized using XRD, scanning electron microscopy (SEM), and Brunauer-Emmett-Teller (BET) techniques. In addition, the introduction of F − ions increased the material's electronegativity, as demonstrated by the change in zeta potential from 53.22 to −45.93 mV. Single-component adsorption of m-cresol or p-cresol on ZSM-5-F(0) and ZSM-5-F(8) respectively were investigated in detail. The adsorption of m-cresol on ZSM-5-F(8) showed a non-monotonic phenomenon with a significant decrease after 0.06 mol/L. The thermodynamic parameters including Δ G , Δ H , and Δ S were calculated accordingly. All the values |Δ G |, |Δ H |, and |Δ S | of both components on ZSM-5-F(8) were greater than those on ZSM-5-F(0), suggesting that the introduction of F − ions facilitated the adsorption. Competitive adsorption experiments on both ZSM-5-F(0) and ZSM-5-F(8) were conducted at 298.2 K. The results indicated that the selectivity α p/m on ZSM-5-F(8) increased with increasing initial concentration and laid between 13 and 14. After seven consecutive regeneration cycles, the selectivity (α p/m ) only decreased to 13. This study suggests that ZSM-5-F(8) could be a promising adsorbent for m-cresol and p-cresol in industrial applications.
✓ 已验证
产品关联
DOI
高影响因子
RARE METALS
·
2025
·
IF 11
Haoran Li,Xin Li,Qilin Gu,Shiyou Zheng
en Transition metal-based amorphous/crystalline (a/c) heterostructured catalysts have garnered significant attention due to their exceptional activity, stability, and cost-effectiveness. However, the precise synergistic regulation of interfacial composition and phase states remains challenging. Herein, we propose an innovative strategy for the controllable synthesis of a/c heterostructures using MIL-100(Mn) template. By leveraging the intrinsic coordination disparity between Ni 2+ and Fe 3+ to drive phase separation, combined with F − mediated ion exchange-phosphidation synergy, we successfully constructed an amorphous FeP x /crystalline Ni 2 P heterostructure (a-(F, Fe)P x /Ni 2 P) with precise compositional control. Systematic investigations reveal that F − not only enhances metal ion exchange through complex stabilization but also induces amorphous/crystalline phase separation via electronic modulation. Meanwhile, a deep reconstruction process occurs under high voltage, transforming the catalyst into active F-Fe/NiOOH species, which further enhances the catalytic activity and durability. Benefiting from the synergistic effects of heterointerface electronic coupling and deep reconstruction, the as-prepared a-(F, Fe)P x /Ni 2 P catalyst exhibits exceptional oxygen evolution reaction (OER) performance in 1 M KOH, delivering an ultralow overpotential of 278 mV at 30 mA cm −2 and maintaining excellent stability over 100 h with negligible degradation. This work establishes a novel “coordination difference-driven, fluorine-mediated” interface engineering strategy, offering valuable insights for the rational design of high-performance heterostructured electrocatalysts. 摘要 zh 基于过渡金属的非晶/晶体异质结构催化剂因其卓越的活性、稳定性和成本效益而备受关注。然而,对其界面组成与相态的精确协同调控仍面临挑战。在此,我们提出了一种利用MIL-100(Mn)模板可控合成非晶/晶体异质结构的新颖策略。通过利用Ni 2+ 与Fe 3+ 之间的本征配位差异驱动相分离,并结合F − 介导的离子交换-磷化协同作用,我们成功构建了具有精确组分调控的非晶FeP x /晶体Ni 2 P异质结构(标记为a-(F, Fe) P x /Ni 2 P)。系统研究表明,F − 不仅通过络合稳定作用增强了金属离子交换效率,还通过电子调控诱导了非晶/晶体相分离。同时,催化剂在高电位下发生深度重构过程,转变为活性的F-Fe/NiOOH物种,从而进一步增强了催化活性与耐久性。受益于异质界面电子耦合与深度重构的协同效应,所制备的a-(F, Fe)P x /Ni 2 P催化剂在1 M KOH电解液中表现出优异的析氧反应性能,在30 mA cm −2 电流密度下仅需278 mV的极低过电位,并能稳定运行超过100 h而无明显衰减。本研究确立了一种全新的“配位差异驱动、氟离子介导”的界面工程策略,为合理设计高性能异质结构电催化剂提供了有价值的见解。
✓ 已验证
产品关联
DOI
高影响因子
MOLECULES
·
2019
·Vol. 24
·期 15
·2705
·
IF 3.06
Feng Li,Sen Guo,Shanshan Zhang,Sainan Peng,Wei Cao,Chi-Tang Ho,Naisheng Bai
Bee pollen contains all the essential amino acids needed by humans. China is the largest producer of bee pollen in the world. In the present study, we identified 11 fatty acids inF. esculentumbee pollen oil by GC-MS analysis, and 16 compounds were isolated fromF. esculentumbee pollen by column chromatography and identified. A high-performance liquid chromatography-diode array detector (HPLC-DAD) method was established for the quality control ofF. esculentumbee pollen. A validated HPLC-DAD method was successfully applied to the simultaneous characterization and quantification of nine main constituents in seven samples collected from seven different areas in China. The results showed that all standard calibration curves exhibited good linearity (R2> 0.999) in HPLC-DAD analysis with excellent precision, repeatability and stability. The total amount in the samples from the seven regions ranged from 23.50 to 46.05 mg/g. In addition, seven compounds were studied for their bioactivity using enzymic methods, whereby kaempferol (3) showed high α-glucosidase inhibitory activity (IC50: 80.35 μg/mL), ergosterol peroxide (8) showed high tyrosinase inhibitory activity (IC50: 202.37 μg/mL), and luteolin (1) had strong acetylcholinesterase inhibitory activity (IC50: 476.25 μg/mL). All results indicated thatF. esculentumbee pollen could be a nutritious health food.Keywords:bee pollen;enzyme inhibitory activity;HPLC-DAD;GC-MS;quality analysis
研究领域:
植物化学
·
食品科学
·
药理学
✓ 已验证
DOI
PubMed
高影响因子
危险品化学品经营许可证（带存储）