Molecular Catalysis
·
2024
·
IF 3.9
Zhenzhen Wang,Encheng Liu,Zhonghua Sun,Zhihui Zhang,Mingyang He,Qun Chen,Junfeng Qian
Formic acid (FA) is of great significance given its extensive applications in various industrial fields. At present, methanol carbonylation is the main industrial production process of FA. However, this process uses two kinds of raw materials from fossil fuels and emits a large amount of CO 2 . Alternatively, converting CO 2 into FA can not only achieve the production of value-added chemicals but also effectively address environmental issues caused by CO 2 emission. To improve the low reactivity of CO 2 , homogeneous and heterogeneous catalytic systems have been widely evaluated, among which heterogeneous catalytic systems are attracting ever-increasing attention owing to their great industrialization prospects. However, some of these heterogeneous catalysts suffer from low catalytic performance. Herein, PdAu alloy nanoparticles anchored on amine-functionalized hierarchical porous carbon (PdAu/HPC-AP) were constructed to drive efficient converting of CO 2 into FA. Characterization and testing results demonstrated that the introduced Au atoms caused lattice distortion and charge redistribution on the surface of the bimetallic catalyst, facilitating the adsorption and activation of reaction molecules. Furthermore, the modification of HPC with an appropriate amount of amine ligands was found important to the chemical adsorption of CO 2 and the dispersion of PdAu NPs. The Pd 60 Au 40 /HPC-AP catalyst with the optimum synergy of alloy and ligand demonstrated excellent activity for the target reaction with a TOF value of 486 h –1 at 100 °C. Moreover, it can even catalyze the reaction at room temperature with a TOF value of 13 h –1 .
✓ 已验证
产品关联
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2024
·
IF 20.2
Peng Zhang,Cai Liang,Mudi Wu,Yongjie Li,Xiaoping Chen,Daoyin Liu,Jiliang Ma
The efficiency and sustainability for the recycling of plastic wastes into hydrogen was investigated. An integrated microwave-driven valorization of plastic wastes and CO 2 for H 2 and CO production was proposed. Specifically, plastic wastes were decomposed into H 2 and solid carbons, followed by carbon elimination via CO 2 gasification under microwave irradiation. Through the high-throughput screen of catalysts as well as the optimization of key parameters, over 96% hydrogen was converted into H 2 with a yield of 480 mmol∙g −1 H plastic while the carbon conversion and CO 2 conversion reached up to 70% and 53%. The five-cycle successive test displayed extraordinarily high and stable catalytic activity due to the facile elimination of carbon deposition. The application for real-world plastic wastes further demonstrated the efficient microwave-driven CO 2 gasification of plastic wastes into H 2 and CO production as a feasible and sustainable technology toward the waste-to-energy circular economy.
✓ 已验证
产品关联
DOI
高影响因子
Materials Today Energy
·
2024
·
IF 9
Fei-Feng Mao,Yu-Hua Dong,Yan Zhou,Ming-Shuai Sun,Wei Hui,Duan-jian Tao
Global climate change has driven the scientific community to improve the utilization of a critical C1 resource carbon dioxide (CO 2 ) through carbon capture utilization (CCU) technology. The cycloaddition of CO 2 with epoxides provides perfect atom economy and economic feasibility to produce versatile cyclic carbonates used in various industries. However, the stable nature of CO 2 and epoxides requires highly active catalysts. In this work, the repurpose of nitrogenous waste melamine foams (MF) as high-performance catalysts for the cycloaddition of CO 2 were explored. The pyrolyzed MF were modified with Cu to prepare a series of acid-base bifunctional porous catalysts (MFC-X-Cu). The results demonstrate that the acid-base synergy of the MFC-X-Cu catalysts increases the efficiency of the cycloaddition of various epoxides, yielding target products at 96-99% under mild conditions. Moreover, the characterization results revealed that the superior performance of MFC-X-Cu stems from its hollow structure and acid-base synergy, which are derived from nitrogen species in the repurposed MF and the post-modified copper component. The catalyst maintained consistent catalytic efficiency over five cycles, highlighting its strong recyclability. This work presents an eco-friendly and sustainable approach towards carbon neutrality by utilizing modified waste materials for CO 2 conversion into high-value chemicals.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Environmental Chemical Engineering
·
2024
·
IF 7.4
Zicheng Yang,Yuming Xie,Yi Feng,Jianfeng Yao
The effective utilization of biomass resources can bring significantly environmental and economic benefits. In this context, tea saponin, which can be easily and extensively extracted from the oil cake as the biomass waste during the seed oil production from camellia seeds, is explored as the precursor to synthesize porous carbon bearing abundant –OH and –COOH groups via a simple carbonization process. Owing to the obtained porous structure and existence of rich oxygen-containing groups serving as Lewis acidic sites, the carbonized tea saponin (CTS) can display impressive catalytic activities for CO 2 cycloaddition reaction with both high selectivity (> 99%) and high yield of target cyclic carbonate under either thermally driven (80 °C and 0.1 MPa CO 2 ) or photo-thermally driven (UV-Vis light irradiation with the light intensity of 350 mW/cm 2 ) conditions. In addition, benefiting from the good chemical stability, CTS can be reused for many cycles with almost no catalytic activity loss, making CTS a promising biomass-based catalyst for CO 2 fixation under mild conditions.
✓ 已验证
产品关联
DOI
高影响因子
Processes
·
2024
·Vol. 12
·期 9
·1912
·
IF 2.8
Bowen Lu,Huiying Sang,Liang Liu,Zhijian Yu,Yaqin Guo,Yongqing Xu
The catalytic applications of micron Cu powder are limited due to its large particle size and small specific surface area. Modifying micro-Cu powder to achieve a high catalytic performance is a challenge in the application of micron copper. In this work, micro-Cu was used to synthesize a CeO2–Cu catalyst, and the phase composition and surface pore structure were analyzed using XRD, BET, etc. The CO2hydrogenation performance of the CeO2–Cu catalyst was analyzed in comparison with CeO2and Cu, and we found that the CeO2–Cu catalyst exhibited a synergistic effect between Cu and cerium, resulting in a much higher hydrogenation performance at 500 °C than CeO2or Cu alone. H2-TPR and TEM characterization revealed that the CeO2–Cu catalyst formed interfacial interactions with a relatively large Ce–Cu interface, where cerium oxide could promote the reduction of CuO and lower the reduction temperature. Additionally, cerium oxide formed a confinement structure for Cu, and the CeO2–Cu catalyst exhibited a higher oxygen vacancy concentration, thereby promoting the CO2hydrogenation performance. Cu–CeO2interaction provides valuable insights into the catalytic application of micron Cu powder.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2022
·
IF 24.319
Xianglin Xiang,Bicheng Zhu,Jianjun Zhang,Chenhui Jiang,Tao Chen,Huogen Yu,Jiaguo Yu,Linxi Wang
The sluggish oxygen evolution reaction (OER) is often the bottleneck of photocatalytic overall water splitting, greatly suppressing the hydrogen-production activity. Herein, the slow OER was replaced by selective benzyl alcohol (BA) oxidation to benzaldehyde (BD) to promote H 2 production. The photocatalytic reaction was conducted over CdS quantum dots , which were modified with Co 2+ hole cocatalysts to further accelerate the rate-limiting BA oxidation. The photocatalytic system exhibits an ultra-high H 2 -production rate of 257.8 mmol g −1 h −1 with a remarkable apparent quantum yield of 69.3% under 365-nm light irradiation. The high performance is attributed to the Co 2+ hole cocatalysts on CdS surfaces, which not only enhance light absorption but also facilitate photogenerated carrier transfer. More importantly, both photogenerated electrons and holes are fully utilized in meaningful reactions. This work exemplifies a bifunctional photocatalytic system for simultaneous production of self-separated hydrogen and benzaldehyde, both of which are important industrial products.
✓ 已验证
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2022
·
IF 24.319
Zesheng Deng,Songchang Hu,Jiahui Ji,Shiqun Wu,Haijiao Xie,Mingyang Xing,Jinlong Zhang
Cu is widely used to prepare high-value products in photocatalytic CO 2 reduction reaction (CO2PR). The valence state of transition metals usually has a great impact on the catalytic process. However, the research on Cu valence in CO2PR is lack for its complex valence change. In current work, Cu x /P25 with stable Cu valence composition in CO2PR is prepared. The results show that Cu is composed of Cu 0 and Cu 2 O, and their proportions change regularly as Cu loading changing, which are linearly related to the selectivity of the corresponding products of CO2PR. Combined with thermodynamic and kinetic analysis, the CO adsorption and activation on the surface of Cu 0 and Cu 2 O are considered to be the key to determine the product of CO2PR, which is further confirmed by DFT calculation. Cu 0 and Cu 2 O are proved to be active site of producing CH 4 and CO, respectively. In this case, a reference for the study of highly selectivity Cu based photocatalysts is provided.
✓ 已验证
DOI
高影响因子
ADVANCED MATERIALS
·
2019
·Vol. 31
·期 36
·1903499
·
IF 25.809
Shiyong Mou,Tongwei Wu,Junfeng Xie,Ya Zhang,Lei Ji,Hong Huang,Ting Wang,Yonglan Luo,Xiaoli Xiong,Bo Tang,Xuping Sun
Electrocatalysis has emerged as an attractive way for artificial CO 2 fixation to CH 3 OH, but the design and development of metal-free electrocatalyst for highly selective CH 3 OH formation still remains a key challenge. Here, it is demonstrated that boron phosphide nanoparticles perform highly efficiently as a nonmetal electrocatalyst toward electrochemical reduction of CO 2 to CH 3 OH with high selectivity. In 0.1 m KHCO 3 , this catalyst achieves a high Faradaic efficiency of 92.0% for CH 3 OH at −0.5 V versus reversible hydrogen electrode. Density functional theory calculations reveal that B and P synergistically promote the binding and activation of CO 2 , and the rate-determining step for the CO 2 reduction reaction is dominated by *CO + *OH to *CO + *H 2 O process with free energy change of 1.36 eV. In addition, CO and CH 2 O products are difficultly generated on BP (111) surface, which is responsible for the high activity and selectivity of the CO 2 -to-CH 3 OH conversion process.
✓ 已验证
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2022
·
IF 24.319
Jingwei Li,Jianrui Feng,Xiaomin Guo,Hongli Fang,Jiayi Chen,Churong Ma,Ruchun Li,Yuya Wang,Zebao Rui
This work reports a novel strategy to activate type III heterojunction through introducing defect sites at the interfaces and making use of the defect band as the bridge for storage, secondary excitation, and interband transfer of the photothermal induced charges for constructing two-component Type B heterojunction photothermocatalyst. Type III heterojunction WO 3−x /GdCrO 3 is activated by defect-band state W 5/4+ at WO 3−x interface under photothermal conditions, achieving efficient charge separation, high redox potential, and full visible light absorption. The as-bridged (or Type B) heterojunction WO 3−x -R/GdCrO 3 as non-noble metal catalyst demonstrates excellent photothermocatalytic performance in toluene degradation with a reaction rate five times higher than that of WO 3−x /GdCrO 3 with less interfacial defect sites as well as in CO 2 reduction with high CO and CH 4 yielding rates of 49.6 μmol g −1 h −1 and 18.5 μmol g −1 h −1 in gas-solid reaction system without sacrifice agent, evidently better than those reported in the literature.
✓ 已验证
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2025
·
IF 21.1
Shaonan Zhang,Yuandong Yan,Qian Zheng,Shicheng Yan,Zhigang Zou
Carbon dioxide reduction reaction (CO 2 RR) on highly reactive frustrated Lewis pairs (FLPs) is a promising avenue for producing high-energy-density fuels from renewable energy. Exploring the effects of alkali metal ions on FLPs electrostatic field in neutral medium is a crucial knot for highly active FLP catalyst development. Here, leveraging the distinct electrochemical stability of In-OH and Bi-OH, we create stable Lewis pairs on the Bi 0.5 In 0.5 O y shell layer of Bi 0.5 In 0.5 O y @Bi 3 In 5 core-shell assembly with coordinatively unsaturated Bi-O Vs sites (Lewis acids) and In-OH (Lewis bases) to detect alkali metal ions effects. We find that K + is able to help electrochemically stable FLPs firstly capture and stabilize protons to protonate to Bi–H Lewis acid and In–OH 2 Lewis base due to their strong steric electrostatic field; then CO 2 is captured and activated by the protonated FLPs to produce formate with high selectivity. Whereas, Li + , Na + , and Cs + will inhibit CO 2 RR and promote the competing hydrogen evolution reaction due to Li + , Na + , and Cs + breaking steric electrostatic field of FLPs by inhibiting Bi-H formation. Our results verify that modulating electrostatic field of frustrated Lewis pairs by appropriate alkali cations is a promising catalyst design concept for highly selective CO 2 RR.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF POROUS MATERIALS
·
2025
·
IF 3.2
Shen Fumin,Yao Shunyang,Pei Yuanchao,Sun Rubin
The increasing levels of carbon dioxide (CO 2 ) emissions driven by industrial activities highlight the urgent need for the development of efficient and sustainable CO 2 capture technologies. Biomass-derived porous carbons have emerged as promising candidates for CO 2 adsorption due to their low cost, high surface area, and adjustable pore structure. In this study, hierarchically porous carbons (HPCs) were synthesized from waste acer truncatum wood through pre-carbonization and subsequent KOH activation. The synthesis conditions, including activation temperature and activating agent concentration, were optimized to precisely tailor the pore architecture. The resulting HPC exhibited excellent CO 2 adsorption capacities of 7.56 mmol·g⁻ 1 at 0 °C and 4.29 mmol·g⁻ 1 at 25 °C under ambient pressure. Notably, ultramicropores (< 0.7 nm) exhibited a dominant role in CO 2 capture at low pressures, while narrow micropores (< 1.0 nm) contributed significantly across a range of low-pressure conditions. The hierarchical pore structure enhanced CO 2 uptake at higher pressures. Furthermore, the material demonstrated exceptional CO 2 /N 2 selectivity, reaching up to 112 at 0.15 bar and 0 °C, along with good cyclic stability, highlighting its potential in post-combustion CO 2 capture. This work provides a sustainable strategy for converting waste biomass into high-value adsorbents, offering a solution that addresses both environmental concerns and economic feasibility.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2021
·
IF 19.503
Yingying Li,Yong Men,Shuang Liu,Jinguo Wang,Kang Wang,Yuhan Tang,Wei An,Xiaoli Pan,Lin Li
Citric acid has been investigated for preparing the highly dispersed nickel catalysts on Y 2 O 3 support. A highly enhanced methanation activity with the high CO 2 conversion of 92 % and CH 4 selectivity of 100 % was obtained over Ni/Y 2 O 3 with optimum addition of citric acid at 350 °C. The citric acid additives during the preparation are found to influence the size of nickel nanoparticles and the interaction of metal and support, as estimated by various techniques, which, in turn, to correlated with the catalytic performance. In situ DRIFTS spectra further indicate the importance of small Ni particles on formation of carbonates and formate species as key intermediates and the subsequent hydrogenation of those species into methane. This study proposes that the Y-O-Ni interfacial structure formed by the strong Ni and Y 2 O 3 interaction at high citric acid addition is of prime importance for the formation of methane, benefiting from the more abundant basic sites and metallic Ni to enable CO 2 activation and hydrogenation of key intermediates by effective H 2 dissociation respectively. This work provides a new design strategy for developing highly efficient composite CO 2 methanation catalysts by control of the metal particle size and charge transfer via metal/support interface.
✓ 已验证
DOI
高影响因子