Materials Science & Engineering C-Materials for Biological Applications
·
2018
·
IF 5.08
Hairui Suo,Deming Zhang,Jun Yin,Jin Qian,Zi Liang Wu,Jianzhong Fu
Gelatin and chitosan (CS) are widely used natural biomaterials for tissue engineering scaffolds, but the poor mechanical properties of pure gelatin or CS hydrogels become a big obstacle that limits their use as scaffolds, especially in load-bearing tissues. This study provided a novel mechanism of forming interpenetrating network (IPN) of gelatin methacryloyl (GelMA) and CS hydrogels by covalent bonds and hydrophobic interactions through photocrosslinking and basification, respectively. By characterization of the compressive and tensile moduli, ultimate tensile stress and strain, it was found that semi-IPN and IPN structure can greatly enhance the mechanical properties of GelMA-CS hydrogels compared to the single network CS or GelMA. Moreover, the increase of either GelMA or CS concentration can strengthen the hydrogel network. Then, the swelling, enzymatic degradation, and morphology of GelMA-CS hydrogels were also systematically investigated. The excellent biocompatibility of GelMA-CS hydrogels was demonstrated by large spreading area of bone mesenchymal stem cells on hydrogel surfaces when CS concentration was <2% (w/v). According to this study, the multiple requirements of properties can be fulfilled by carefully selecting the GelMA and CS compositions for IPN hydrogels.
研究领域:
生物材料
·
组织工程
·
高分子科学
·
生物医学工程
✓ 已验证
DOI
高影响因子
Current Research in Food Science
·
2026
·
IF 7
Xiangxin Li,Jun Yang,Hualei Chen,Mohammad Rizwan Khan,Naushad Ahmad,Wenli Tian
This study presents a sustainable approach for developing multifunctional chitosan (CS) food packaging films by incorporating propolis-mediated silver nanoparticles (AgNPs) anchored onto graphene oxide (GO). The biosynthesized AgNPs (≈51 nm) were uniformly dispersed, and their attachment to GO increased the composite particle size to about 258 nm while enhancing structural stability. GO incorporation strengthened the CS matrix, leading to a 47.62% improvement in tensile strength and effectively limiting AgNP migration. The CS/GO–AgNP films exhibited strong antibacterial activity (83.25–100% inhibition) against Escherichia coli ATCC 15597 and Staphylococcus aureus ATCC 12600 , enabled by the combined effects of AgNPs and propolis, together with a controlled Ag release (33.42–45.34%) that supported sustained antimicrobial function. When applied to blueberries, the films reduced weight loss by 43.32% and surface wrinkling by 49.10%, helping maintain postharvest quality. Structural characterizations (SEM, FTIR, XRD) further confirmed improved uniformity and interfacial compatibility among CS, AgNPs and GO. Overall, this work provides a practical and environmentally friendly strategy for designing high-performance food packaging materials, offering theoretical support and reference for developing antimicrobial systems with enhanced mechanical stability and reduced nanoparticle migration.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2026
·
IF 8.5
Yuqin Qiu,Ting Li,Han Yi,Lin Xiao,Ninghao Song,Jiang Hu,Xin Zhao
The rapid advancement of flexible wearable electronics has created an urgent demand for multimodal flexible sensors with both high sensitivity and effective decoupling of multiple physical signals. Herein, we propose a hydrogel-based strain–temperature bimodal flexible sensor enabled by a synergistic strategy of local strain concentration and interfacial charge regulation. The sensor is composed of a polyacrylamide/chitosan (PAM/CS) hydrogel substrate coated with a PEDOT:PSS conductive layer. A periodic platform architecture induces strain concentration in the non-platform regions, thereby significantly enhancing strain sensitivity. Meanwhile, the electrostatic interaction between CS and poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) strengthens the interfacial adhesion and elevates the Seebeck coefficient to 118 μV/K, leading to improved temperature sensitivity. Benefiting from this synergistic mechanism, the fabricated bimodal sensor exhibits outstanding comprehensive performance, including high strain sensitivity (GF = 10.25), a low strain detection limit (0.2%), fast response/recovery time (0.2 s), high temperature sensitivity, an ultralow temperature detection limit (0.2 K), and excellent stability and cycling reliability. More importantly, the local strain concentration strategy enables effective decoupling of strain and temperature signals. Furthermore, the device can switch between single-point/multipoint strain monitoring and spatial temperature field mapping modes, demonstrating broad application potential in human joint motion detection, rehabilitation training, and wearable temperature monitoring.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CARBOHYDRATE POLYMERS
·
2026
·
IF 12.5
Tingting Ma,Yiran Li,Aolong Li,Siluo Dai,Zhengyang Qin,Yubao Li,Jidong Li
The core difficulty in bone defect repair lies in the simultaneous regulation of immunity, angiogenesis and osteogenesis. In this study, hydrophobic resveratrol (Res) was encapsulated in liposomes (LP), and then co -spun with polyvinyl alcohol-chitosan (PVA-CS) to construct a “drug-liposome-fiber” multi-level drug-controlled-release scaffold (RL/PVA-CS). Physicochemical characterization confirmed that this scaffold could sustain the release of Res, and CS incorporation significantly enhanced mechanical properties of the PVA-based fiber scaffold. In vitro studies confirmed that the RL/PVA-CS scaffold not only efficiently scavenged free radicals, regulated macrophage polarization to M2 type to improve the immune microenvironment, but also demonstrated a significant potential for promoting angiogenesis. Moreover, this scaffold could effectively recruit bone marrow mesenchymal stem cells (BMSCs) and drove their osteogenic differentiation and matrix mineralization by activating the autophagy pathway. In a rat cranial defect model, the implantation of the RL/PVA-CS scaffold demonstrated excellent angiogenic ability and osteogenic performance, significantly accelerating bone defect repair. The main innovation of this study is the development of a dual-release and multi-functional synergistic RL/PVA-CS fiber scaffold. This system effectively protects drug activity, overcomes single-function limits of traditional materials, coordinates immunity, angiogenesis and osteogenesis via autophagy, offering an integrated solution for complex bone defects.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CARBOHYDRATE POLYMERS
·
2026
·
IF 12.5
Junhao Ye,Ruiquan Hou,Kang Xie,Guangmin Ou,Zhixiang Zhang,Dongmei Cheng
The plant-derived photoactivated fungicide α-Terthienyl (α-T) exerts antimicrobial effects through light-induced reactive oxygen species generation. However, its agricultural application has been constrained by poor targeting capability and low photostability. To address these challenges, we developed a dual-responsive nanoparticle delivery system (α-T NPs) based on a pectin-chitosan polymer network that specifically recognizes the acidic and pectinase-rich microenvironment created by Botrytis cinerea hyphae secretions. Controlled release studies demonstrated that both acidic conditions (pH 5.0) and pectinase exposure substantially promoted α-T release, achieving cumulative release rates of 71.73% and 74.49% respectively over 60 h. The nanoparticle system showed no adverse effects on healthy tomato leaf growth while forming a protective barrier that effectively suppressed fungal infection. Targeted delivery significantly enhanced fungicidal efficacy, with α-T NPs exhibiting an EC₅₀ of 0.419 mg/L compared to 1.943 mg/L for α-T (technical material, TC). Confocal microscopy and quantitative analysis confirmed the enhanced targeting mechanism, revealing substantially stronger fluorescence intensity and higher α-T accumulation specifically on treated fungal hyphae. Additionally, α-T NPs significantly improved photostability, extending the half-life by approximately 1.93-fold under continuous illumination compared to α-T (TC). This work establishes an innovative “pathogen-activated” delivery platform with promising applications in sustainable crop protection.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2026
·
IF 8.5
Li Guo,Rongfeng Wu,Yajun Wei,Zhen Yao,Xiaopin Su,Qiong Su,Jing Yu
Water pollution caused by anionic dyes, particularly exemplified by Congo Red (CR), poses a serious threat to ecosystems. To address this, a TiO 2 -chitosan-cyclodextrin polymer (CS-β-CDP/TiO 2 ) was prepared via a host-guest recognition strategy. Its unique structure not only prevented the aggregation of TiO 2 but also endowed it with an adsorption-photocatalytic synergistic effect, enabling the effective removal of CR. Detailed characterization (FTIR, XRD, XPS, TEM, TGA) confirmed the successful integration of anatase TiO 2 nanoparticles (ca. 6–15 nm) onto the chitosan-cyclodextrin polymer (CS-β-CDP), with a TiO 2 loading of 53%. The introduction of TiO 2 led to a substantial increase in the BET surface area, which reached 15.597 m 2 ·g −1 . The corresponding adsorption capacity of CS-β-CDP/TiO 2 was 124.2 mg·g −1 under optimized conditions. The adsorption process was well described by the Langmuir isotherm model and obeyed the pseudo-second-order kinetic expression. Furthermore, electrochemical impedance spectroscopy (EIS) and photoluminescence (PL) analyses confirmed the photocatalytic activity of CS-β-CDP/TiO 2 . Remarkably, the photocatalytic degradation rate was 99.5% under UV irradiation, the TOC (total organic carbon) analysis confirmed the effective mineralization of the dye. Importantly, possible pathways for CR degradation were proposed based on the results of LC-MS analysis and trapping experiments. Furthermore, the composite material demonstrated excellent stability with low Ti ion leaching (5.089 mg/L) and retained high performance over five adsorption-photocatalytic regeneration cycles. This demonstrates a new approach for the combined application of chitosan and TiO 2 , highlighting the potential of CS-β-CDP/TiO 2 as a green, recyclable solution for wastewater remediation.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
NAUNYN-SCHMIEDEBERGS ARCHIVES OF PHARMACOLOGY
·
2026
·
IF 3.1
Zhang Yakun,Zhang Cuiping
Rehabilitation for wound care involves a specialized program designed to promote wound healing. This often requires a multidisciplinary team and innovative therapies to enhance healing. However, the discovery of new therapeutics for wound care is limited by issues such as microbial resistance. Levofloxacin (LEV), an antibiotic used to treat bacterial and fungal infections, faces challenges due to its poor bioavailability and limited clinical usage. In this study, we developed a pH-responsive delivery system to effectively release LEV at targeted sites. We successfully encapsulated LEV within multifunctional ZIF-90 nanocrystals coated with a chitosan (CS) polymer. The designed CS@LEV-ZIF-90 NPs enable a pH-responsive antibiotic release mechanism that is particularly effective in acidic environments. This controlled drug release kinetics of ZIF-90 nanocrystals facilitates the rapid delivery of LEV within microbial cells. Our findings demonstrate that the combination of zinc and LEV exhibits a synergistic antibacterial effect, resulting in zones of inhibition of 26 mm against Escherichia coli ( E. coli ) and 16 mm against Staphylococcus aureus ( S. aureus ). Moreover, live/dead antibiofilm assays indicate that the CS@LEV-ZIF-90 NPs can eliminate approximately 80% of biofilm-forming infectious pathogens at the lowest tested dose. Additionally, antifungal tests reveal a significant reduction in colony growth against wound-infecting fungi, such as Candida albicans and Aspergillus fumigatus . Importantly, CS@LEV-ZIF-90 NPs exhibit a potential anti-inflammatory effect against LPS-stimulated RAW 264.7 cells, which enhances wound healing and alleviates the inflammation. The biocompatibility investigation confirms that the synthesized CS@LEV-ZIF-90 NPs are non-toxic for clinical applications. Overall, this research highlights the potential of these nanoparticles as an effective and innovative therapeutic option for nursing care of wound healing and rehabilitation in public health.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2026
·
IF 8.5
Jiaojiao Yan,Haoxin Cai,Shuai Ma,Xin Wen,Ze Zhao,Shixin Wang,Yiming Qi,Jun Wu,Hongbing Deng
Articular cartilage defects represent a persistent clinical challenge in orthopedics. Articular cartilage, the load-bearing tissue of diarthrodial joints, possesses a hierarchically organized extracellular matrix (ECM) dominated by type II collagen and aggrecan, yet its avascular, aneural nature and low cellularity severely limit intrinsic repair capacity. Left untreated, such defects often progress to post-traumatic osteoarthritis. Despite significant advancements in tissue engineering for osteochondral regeneration, the hierarchical complexity and biomechanical demands of articular cartilage remain critical challenges. To address these limitations, we developed an injectable nanocomposite hydrogel by incorporating 2 % silk fibroin nanofibers and glucosamine into a thiolated chitosan matrix, enabling in situ gelation. The system achieved a 100.3 % increase in compressive strength over pristine chitosan hydrogel, alongside enhanced bioactivity: 26.2 % greater cellular proliferation, 150 % improved migration, and elevated chondrogenic differentiation. In a rat osteochondral defect model, the hydrogel promoted seamless tissue integration, articular surface restoration, and significant upregulation of cartilage-specific markers (COL-II, SOX-9). Collectively, this study presents a potentially translatable strategy that aims to address the longstanding trade-off between mechanical stability and bioactivity in cartilage repair.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF THE TEXTILE INSTITUTE
·
2021
·
IF 1.88
Zhong Zhao,Chris Hurren,Liming Zhou,Lu Sun,Jihong Wu
Antioxidants can inhibit the photofading of natural dyes. However, their effects on improving the light fastness of fabrics dyed with natural dyes are still limited since no stable covalent bonds formed between their molecules and the substrate in the conventional dipping and padding method. In this study, one antioxidant, gallic acid, was grafted to chitosan via the redox reaction between ascorbic acid and hydrogen peroxide. The grafted chitosan was then cross-linked onto cotton fabric dyed with gardenia yellow. Results of colour change caused by the exposure of treated fabric to simulated sunlight irradiation show that gallic acid grafted chitosan (GA-g-CTS) inhibited photofading of gardenia yellow on cotton. Results from handle test show that although the softness of cotton fabric cross-linked with GA-g-CTS slightly deteriorated, the overall handle of the treated fabric was not distinctly affected.
✓ 已验证
DOI
高影响因子
MICROCHEMICAL JOURNAL
·
2026
·
IF 5.2
Chaojie Yu,Jie Yang,Yuxin Sang,Congmin Liu,Juan Wang,Zuwei Song,Fansheng Cheng,Weina Li
Biomass-derived blue CDs were immobilized in DZN-imprinted chitosan gel beads. • An IFE-governed fluorescence decrease enabled dual-mode readout by fluorometry and standardized smartphone imaging. • Rapid on-site determination was achieved within ∼10 min over 40–2000 μg/L. • Low detection limits were obtained (8.8 nM by fluorometry; 18.7 nM by smartphone readout). • The method showed good selectivity, matrix robustness, and agreement with an LC-MS reference method in real waters. A portable and environmentally benign sensing method was developed for on-site determination of diazinon (DZN) in environmental waters based on blue fluorescent carbon-dot-embedded molecularly imprinted chitosan gel beads (B-CDs@MIPGB). Biomass-derived blue carbon dots (B-CDs) were synthesized from yellow rose extract and immobilized within a DZN-imprinted chitosan network via a one-pot imprinting–crosslinking strategy followed by coagulation-bath bead formation. DZN binding in the imprinted cavities induced a concentration-dependent fluorescence decrease mainly governed by an inner filter effect (IFE), enabling dual-mode quantification by both fluorometry and standardized smartphone imaging. The method provided a linear response from 40 to 2000 μg/L with detection limits of 8.8 ± 0.09 nM (fluorometry) and 18.7 ± 0.12 nM (smartphone readout). A low-cost imaging box with fixed acquisition settings was employed to minimize variability in smartphone analysis, yielding repeatable G/B ratios with RSD below 3.59%. The beads exhibited high selectivity over common coexisting pesticides and metal ions, and maintained reliable performance under representative matrix interferences including humic acid, turbidity, and mixed major ions. Benchmarked against a reference LC-MS method using identical spiked samples, the developed approach achieved recovery rates of 97.2%–104.4% (fluorescence) and 98.4%–104.8% (smartphone), confirming its accuracy. This bead-based platform integrates selective recognition, rapid operation (∼10 min), and field-deployable readout, offering a practical tool for routine environmental surveillance of organophosphorus pesticide residues. One-pot imprinting embeds yellow-rose-derived B-CDs into chitosan gel beads using DZN as a template. After cross-linking and template removal, DZN-selective cavities enable rebinding/enrichment, producing IFE-dominated fluorescence quenching. Dual readout (fluorometer/smartphone) supports on-site analysis, validated in real waters by LC-MS. Download: Download high-res image (259KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
COMPOSITES PART B-ENGINEERING
·
2026
·
IF 14
Zhirong Xu,Yong Pan,Ahmed Mebarki,Yuling Xiao
Developing intelligent fire-safe materials with integrated flame retardancy and rapid fire-warning capability remains a major challenge for next-generation thermal safety systems. In this work, a flexible nacre-inspired multifunctional composite film was successfully fabricated by integrating phosphorylated chitosan (PCS), MXene nanosheets, and hydroxyapatite nanowires (HAP NWs) through a vacuum-assisted filtration strategy. Benefiting from the synergistic effects of phosphorus-induced catalytic charring, MXene-derived barrier protection, and HAP NW-reinforced structural stabilization, the composite film exhibited significantly enhanced thermal stability, flame retardancy, and fire-warning performance. Compared with the pristine chitosan film, the peak heat release rate was reduced by 81.7%, while the composite film achieved an ultrafast fire-warning response time of 0.37 s with stable alarm duration under direct flame exposure. Condensed-phase and gas-phase analyses revealed that the synergistic integration of PCS, MXene, and HAP NWs effectively suppressed combustible volatile release and promoted the formation of a stable inorganic-carbonaceous protective layer. This work provides a promising strategy for developing next-generation bio-based intelligent fire-safe materials for applications in energy storage systems, cable fire protection, and thermal safety management.
✓ 已验证
DOI
高影响因子
CARBOHYDRATE POLYMERS
·
2026
·
IF 13.2
Junjie Hu,Jianfeng Hu
The Development of efficient and eco-friendly corrosion inhibitors for copper is essential for protecting metals in electronic and electrical equipment as well as marine engineering. In this study, a carbon dot-modified chitosan (CS-CDs) corrosion inhibitor was synthesized via pyrolysis and amidation reactions, which enhanced the adsorption performance of chitosan and imparted corrosion-responsive functionality. Electrochemical tests indicated that CS-CDs exhibit excellent corrosion inhibition performance for copper in 3.5 wt% NaCl solution, with an inhibition efficacy of 92.65% at 200 mg/L. Based on DFT and MD simulations, the intrinsic mechanism underlying the enhanced corrosion inhibition performance was revealed at the molecular level. Furthermore, CS-CDs not only possess excellent fluorescence properties but also exhibit a highly sensitive response to Cu 2+ . Once the Cu 2+ concentration reaches 5 × 10 −4 mol/L or higher, significant fluorescence quenching of the solution is observed, demonstrating its potential for visual monitoring of the corrosion process. This chitosan derivative provides new insight into fluorescent, environmentally friendly corrosion inhibitors and can be used to construct a self-reporting intelligent anti-corrosion field.
✓ 已验证
DOI
PubMed
高影响因子