文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第2989至3000个,产品总数11,257个

切换升序
Co)
JOURNAL OF ALLOYS AND COMPOUNDS · 2021 · IF 5.316

Improved luminescence and afterglow emission from Mn2+/Si4+ co-doped AlN by combustion synthesis method

Zhanglin Chen,Wei Cui,Kaiming Zhu,Chunguang Zhang,Chuandong Zuo,Yude Niu,Qi Wang,Xuanyi Yuan,Guanghua Liu

An orange-red emitting Mn 2+ /Si 4+ co-doped AlN phosphor was prepared by an efficient combustion synthesis method. Phase identification and structure characterization were performed using powder X-ray diffraction (XRD) and refined by the Rietveld method. Luminescence and afterglow properties of the AlN-based phosphors such as photoluminescence spectra (PL), CIE values, afterglow decay curves, thermoluminescence glow curves (TL) were systematically studied. Using the Tanabe-Sugano diagram, the Racah parameters B , C , and crystal field splitting parameter Dq of as-prepared phosphor were calculated to be 812 cm −1 , 2168 cm −1 , and 780 cm −1 , respectively. The luminescence intensity and afterglow time were increased, respectively, by about 1.1 and 2.2 times after 3% Si 4+ co-doping. Particular attention was paid to study the mechanism of Si 4+ co-doping on improving luminescence properties using a combination of the above-mentioned method and X-ray photoelectron spectroscope (XPS). Two hypothetical stress cancellation and charge rebalance effects due to Si 4+ co-doping were discussed. Besides, it was found a shallower trap level (0.56 eV, compared to 0.84 eV for those without Si 4+ co-doping) was formed after the co-doping of Si 4+ , which results in enhanced afterglow performance.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH · 2020 ·Vol. 27 ·期 13 ·15068-15082 · IF 3.056

Co-transport behavior of ammonium and colloids in saturated porous media under different hydrochemical conditions

Li Jingqiao,Zhang Wenjing,Qin Yunqi,Li Xiaofei,Wu Shengyu,Chai Juanfen,Du Shanghai

To investigate co-transport behavior of ammonium and colloids in saturated porous media under different hydrochemical conditions, NH 4 + was selected as the target contaminant, and silicon and humic acid (HA) were selected as typical organic and inorganic colloids in groundwater. Column experiments were then conducted to investigate the transport of NH 4 + colloids under various hydrochemical conditions. The results showed that because of the different properties of colloidal silicon and HA after combining with NH 4 + , the co-transport mechanism became significantly different. During transport by the NH 4 + –colloid system, colloidal silicon occupied the adsorption sites on the medium surface to promote the transport of NH 4 + , while humic acid (HA) increased the number of adsorption sites of the medium to hinder the transport of NH 4 + . The co-transport of NH 4 + and colloids is closely related to hydrochemical conditions. In the presence of HA, competitive adsorption and morphological changes of HA caused NH 4 + to be more likely to be transported at a higher ionic strength (IS = 0.05 m, CaCl 2 ) and alkalinity (pH = 9.3). In the presence of colloidal silicon, blocking action caused the facilitated transport to be dependent on higher ionic strength and acidity (pH = 4.5), causing the recovery of NH 4 + to improve by 7.99%, 222.25% (stage 1), and 8.63%, respectively. Moreover, transport increases with the colloidal silicon concentrations of 20 mg/L then declines at 40 mg/L, demonstrating that increased concentrations will lead to blocking and particle aggregation, resulting in delayed release in the leaching stage. Graphical abstract

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
POLYMER BULLETIN · 2022 ·Vol. 80 ·期 9 ·9709-9726 · IF 2.843

Ductile polylactic acid-based blend derived from bio-based poly(butylene adipate-co-butylene furandicarboxylate)

Wang Guoqiang,Zhang Li,Wang Jianyu,Hao Xingyu,Dong Yakun,Sun Rubo

Polylactic acid (PLA) is a kind of bio-based and biodegradable polyester and has shown promise in a variety of fields, but its wider application is limited due to its brittle property. Therefore, in order to improve the ductility of PLA, we synthesized bio-based and biodegradable poly(butylene adipate-copolybutylene furandicarboxylate) (PBAF70) and blended with PLA. The blend's structure, mechanical properties, thermal properties, crystallization properties, and rheological properties were characterized. The results reveal that when the amount of PBAF70 varies from 0 to 30 wt%, the elongation at break increases from 5.7 to 222%, indicating that PBAF70 enhanced the ductility of PLA. At the same time, XRD results showed that stretching-induced crystallization occurred in PBAF70 during the stretching process. The strongly electronegative oxygen atoms in the furan ring may increase the interaction and the compatibility between PBAF70 and PLA. Therefore, the glass transition temperature of PBAF70 is not obvious in the DSC curves of the blends, and the rheological results show that the complex viscosity of the blends is greater than that of PLA. Due to the addition of PBAF70, PLA can only crystallize at a higher temperature, and the addition of PBAF70 hinders the cold crystallization of PLA. It can be seen from SEM that the cross section of the blend is rough, while the PLA is smooth. When the amount of PBAF70 was the same as that of PBAT, the elongation at break of PLA/PBAF70 was better than PLA/PBAT.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF CATALYSIS · 2022 · IF 8.047

Activity enhancement of ceria-supported Co-Mo bimetallic catalysts by tuning reducibility and metal enrichment

Biyun Fang,Zeliang Qi,Fangming Liu,Chuanfeng Zhang,Chunyan Li,Jun Ni,Jianxin Lin,Bingyu Lin,Lilong Jiang

The development of efficient oxides-supported bimetallic catalysts is critical for ammonia synthesis or other catalytic reactions. Herein, the design of ceria-supported Co-Mo bimetallic catalysts with different properties is performed by changing Mo addition to enhance the ammonia synthesis activities. It is found that the reduction of ceria and molybdenum oxide would be boosted by Co species, but the reduction of the bimetallic catalyst would be inhibited by the aggregated molybdenum oxide for the catalyst with Co and Mo simultaneous addition. On the contrary, this ill effect of molybdenum oxide on the reduction of the bimetallic catalyst can be effectively alleviated by the subsequent addition of Mo species to ceria-supported Co catalyst, resulting in enhancement of the proportion of Co metal, Ce 3+ and low-valent Mo species, as well as surface enrichment of Co species. In such cases, the amount of the adsorbed hydrogen and nitrogen species would increase, and hydrogen species preferentially desorbs following a pathway of H 2 formation. As a result, the catalyst obtained by the separate addition of Co and Mo shows 2.5-fold more active than its counterpart with the simultaneous addition of Co and Mo species. These findings provide a valuable insight in designing reducible oxide-supported bimetallic catalysts in ammonia synthesis or other hydrogen-involved reactions.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS · 2021 ·Vol. 32 ·期 8 ·10734-10749 · IF 2.478

Room temperature ferromagnetism in dilute magnetic semiconducting ZnO nanoparticles co-doped with Tb and Fe

Kabir Fazal,Murtaza Adil,Saeed Azhar,Ghani Awais,Ali Anwar,Khan Saleh,Kaili Li,Qizhong Zhao,Kang Yao Kang,Yang Sen

Room temperature ferromagnetism with the doping of magnetic ions in the semiconducting host is the fundamental criterion for the potential use of spintronics material. In the present study, pure and (Fe, Tb) co-doped ZnO nanoparticles were well-prepared via the co-precipitation method, and corresponding microstructural, magnetic, and optical properties were investigated. The formation of Wurtzite hexagonal crystal structure of pure and doped ZnO was confirmed by X-ray diffraction (XRD) studies. No secondary phase was detected in all samples. Microstructural analysis reveals the spherical morphology of synthesized particles with the average size in the nanometer range. Fourier transforms infrared spectra show Tb–Zn–O stretching at 550 cm −1 . Optical absorption spectra show that the bandgap decreases and the absorption band slightly shift toward the visible region with increasing Tb doping, which may be due to the transfer of charge between the Tb ion 4f level and ZnO valance band. The photoluminescence (PL) spectrum exhibits a strong emission in the visible range, and PL emission intensity decreases with increasing Tb concentration and is anticipated to be due to the low recombination rate of electron–hole pairs. Most importantly, the room temperature ferromagnetism (RTFM) was observed in the doped ZnO nanoparticles, ascribed to the bound magnetic polaron (BMP) mechanism. The optical and magnetic outcome demonstrates that prepared (Fe, Tb) co-doped ZnO based dilute magnetic semiconducting (DMS) material are potential candidates for spintronics applications.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
POLYMER TESTING · 2023 · IF 5.1

AIN particles/BN whiskers co-doped epoxy composites modified with polydopamine with high thermal conductivity

Xiaohang Sun,Ling Weng,Jingming Liu,Xiaorui Zhang,Lizhu Guan,Hao Chen,Wei Zhao

In this work, aluminum nitride particles (AlN) and boron nitride whiskers (BN w ) were surface-functionalized by polydopamine, and then novel composites were prepared by co-doping. By observing with transmission electron microscopy, we clearly saw that the surfaces of AlN and BN w were successfully coated with a thin polydopamine coating. This is beneficial to enhance the filler-matrix interface interaction and the filler dispersion. The co-doping of the two thermally conductive fillers increases the chance of contact between the filler and the filler, and reduces the interfacial thermal resistance, thereby forming a thermal conduction network more efficiently. The results show that at a frequency of 1 MHz at room temperature, the dielectric constant of 30 wt%AlN@PDA/6 wt%BN w @PDA/EP composites is 4.74 and the dielectric loss tangent is 0.0171. Its thermal conductivity is 0.40 W/(m·K), the glass transition temperature reaches 250.2°C, the impact strength reaches 6.89 kJ m −2 , and the breakdown field is 10.93 kV/mm.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF SOLID STATE ELECTROCHEMISTRY · 2024 · IF 2.6

3D porous Ti3C2Tx prepared on carbon cloth by electrophoretic co-deposition for enhanced supercapacitor performance

Li Xiang,Pan Zhihu,Ji Xiaohong

MXenes are promising two-dimensional materials for energy storage applications, but the stacking and aggregation of MXene nanosheets degrade their electrochemical performance. In this work, three-dimensional (3D) porous Ti 3 C 2 T x was successfully prepared on carbon cloth with controllable mass loading, porosity, and pore size with an electrophoretic co-deposition (EPCD) strategy by introducing polystyrene (PS) microspheres as soft sacrificial templates. The resulting 3D porous structure exhibits a significant enhancement in electrochemical performance due to effectively suppressing the stacking and aggregation of Ti 3 C 2 T x nanosheets, which provides additional electron transport channels and electrochemically active sites. The modified 3D porous Ti 3 C 2 T x @CC shows a specific capacitance as high as 299 F g −1 (about 1.6 times that of pristine Ti 3 C 2 T x ) at a current density of 1 A g −1 , a satisfactory capacitance of 234 F g −1 (approximately 78.3% of the initial capacitance) under a high current density of 10 A g −1 , and excellent cycling stability. Furthermore, a porous Ti 3 C 2 T x @CC-based symmetric supercapacitor displays an energy density of 6.6 µWh cm −2 (3.9 Wh kg −1 ) at a power density of 0.2 mW cm −2 (125 W kg −1 ). This work facilitates an effective EPCD strategy for producing 3D porous Ti 3 C 2 T x for energy storage, electrocatalysis, and environmental applications.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY · 2021 · IF 5.302

Reidinger defects induced thermally stable green emission from Eu2+, Mn2+ co-doped Ba0.75Al11O17.25 transparent ceramics

Zixin Wang,Hui Lin,Dawei Zhang,Ruijin Hong,Yanna Tian,Jie Chen,Shengming Zhou

In this paper, Ba 0.75 Al 11 O 17.25 was selected as the host for the Eu 2+ and Mn 2+ co-dopants due to the Reidinger defects in its lattice. Upon the 365 nm excitation, the phosphors presented the cyan to green tunable emission by changing the doping concentration of Mn 2+ . Moreover, this phosphor possesses zero-thermal quenching up to 448 K due to the interaction between the traps and Eu 2+ /Mn 2+ . The completely densified ceramic guaranteed the high optical transmittance (∼72 % at 516 nm) and thermal conductivity (4.3 W·m −1 ·K −1 at room temperature). When combined with a 6 W commercial 365 nm emitting LED chip, the temperature of the ceramic eventually stabilized at 428 K and the luminous efficacy of the LED device was almost not influenced by the thermal quenching effect. This work may open a way for exploring new phosphor conversion materials for HP/HB PC solid state lighting.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY · 2021 · IF 5.816

Effect of Ni and SAPO-34 co-additive on enhancing hydrogen storage performance of MgH2

Senliang Xi,Xiaojun Wang,Kudzaishe Caren Tome,Tonghuan Zhang,Zongying Han,Meng Gao,Shixue Zhou,Hao Yu

The hydrogen storage performances of MgH 2 improved by the addition of Ni and SAPO-34 were studied in detail. The mixture of MgH 2 with Ni and SAPO-34 was a physical reaction as shown by the X-ray diffraction (XRD) results. The SAPO-34 and Ni were uniformly distributed on the surface of MgH 2 . The thermodynamic and kinetic properties of 90MgH 2 /5Ni/5SAPO-34 were investigated by differential scanning calorimetry (DSC) and pressure-composition-isothermal (PCI) methods. The results showed that the dehydrogenation activation energy of 90MgH 2 /5Ni/5SAPO-34 decreased by 64.3 kJ/mol compared with that of MgH 2 . In addition, the relationship between the value of dehydrogenation heat and hydrogen content was also investigated by in-situ calorimetry. The enthalpy value of each sample in the dehydrogenation processes were calculated by in-situ calorimetry measurement. The dehydrogenation enthalpies of as-milled MgH 2 and 90MgH 2 /5Ni/5SAPO-34 were 63.2 kJ/mol H 2 and 53.6 kJ/mol H 2 , respectively. Thus, the co-doping of Ni and SAPO-34 contributed significantly to decrease the thermodynamic stability and improve the hydrogen sorption kinetic properties of MgH 2 .

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
OPTICAL MATERIALS · 2019 · IF 2.687

Transparent Tb3Ga5O12 magneto-optical ceramics sintered from co-precipitated nano-powders calcined at different temperatures

Xiaoying Li,Qiang Liu,Hongming Pan,Nan Jiang,Zhaoxiang Yang,Tengfei Xie,Lexiang Wu,Jiang Li

Terbium gallium garnet (TGG) ceramics were fabricated by air sintering and successive HIP post-treating from the TGG nanoparticles synthesized via the co-precipitation technique. The influences of the calcination temperature on the phase and morphology evolution of the nano-powders, as well as the optical transparency and microstructure of the obtained TGG ceramics were investigated in detail. The powders calcined at 1100–1250 °C retained the TGG phase purity and displayed significantly less agglomeration. Using the above powders as raw materials, the TGG ceramics pre-sintered at 1500 °C for 3 h in air and then HIP post-treated at 1550 °C for 3 h under 150 MPa argon gas showed the similar optical qualities and the in-line transmittances were about 70% at 1064 nm. The Verdet constants of all the ceramics were calculated to be about 137 rad T −1  m −1 at room temperature, which were nearly independent of the optical quality of the ceramics.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING · 2021 · IF 3.927

Study on the role of Mn in Ag and Mn co-doped Cu2ZnSnS4 thin films

Xiao Tian,Jiaxiong Xu

The reported Ag and Mn co-doped Cu 2 ZnSnS 4 thin film has better properties than single-doped Cu 2 ZnSnS 4 . However, the role of Mn in co-doped Cu 2 ZnSnS 4 thin film is still unclear. In this paper, Ag and Mn co-doped Cu 2 ZnSnS 4 thin films with different Mn amounts were prepared by sol-gel method. The crystal phases, morphologies, element compositions, and optical properties of co-doped Cu 2 ZnSnS 4 thin films were characterized to investigate the role of Mn doping. Compared with Ag single-doped Cu 2 ZnSnS 4 thin film, after the incorporation of Mn into Ag-doped Cu 2 ZnSnS 4 , the crystallinity of Cu 2 ZnSnS 4 improves and the micro-strain and dislocation density in the crystal reduce. The valence states of Cu, Zn, Sn, S, Ag, and Mn in co-doped thin film are +1, +2, +4, −2, +1, and +2, respectively. Mn doping can make the grains on the thin film surface enlarge. The MoS 2 interface layer between Cu 2 ZnSnS 4 and Mo becomes thinner and the Urbach energy of Cu 2 ZnSnS 4 decreases after Mn doping. Therefore, Mn in the co-doped Cu 2 ZnSnS 4 thin films shows beneficial effects of enhanced structural, morphological, and optical properties of the films.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
ANALYTICA CHIMICA ACTA · 2019 · IF 5.256

Electrochemical co-deposition synthesis of Au-ZrO2-graphene nanocomposite for a nonenzymatic methyl parathion sensor

Nan Gao,Chaohui He,Mingyu Ma,Zhiwei Cai,Yang Zhou,Gang Chang,Xianbao Wang,Yunbin He

For the first time, a simple electrochemical co-deposition was utilized to synthesis the gold and zirconia nanocomposites modified graphene nanosheets on glassy carbon electrode (Au-ZrO 2 -GNs/GCE) for electrocatalytic analysis of methyl parathion (MP). According to Field-Emission Scanning Electron Microscopy (FE-SEM), Transmission Electronic Microscopy (TEM) and X-Ray Diffraction (XRD), the gold nanoparticles were uniformly distributed on the surface of graphene-based nanocomposite. The Au-ZrO 2 -GNs/GCE based sensor exhibited superior capacity for MP detection, ascribed to the strong affinity of zirconia towards the phosphoric group, as well as the high catalytic activity and good conductivity of Au-GNs. The best fabrication and work conditions were then obtained by systematically optimization of the electrodeposition process, pH value and enrichment time. Compared to the gold nanoparticles , zirconia or graphene modified electrodes , Au ZrO 2 -GNs/GCE sensor displayed superior electro-catalytic response toward MP oxidation . The sensor response current of square wave voltammetry was highly linearly correlated with the MP concentrations range of 1–100 ng mL −1 and 100–2400 ng mL −1 with the detection limit of 1 ng mL −1 . The Au-ZrO 2 -GNs/GCE nanocomposite sensor showed excellent accuracy and reproducibility for detection of MP in Chinese cabbage samples, providing a new method for efficient pesticide detection in practical applications.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。