文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第2989至3000个,产品总数3,922个

切换升序
Mxene
CERAMICS INTERNATIONAL · 2023 · IF 5.2

FeNi/C/TiO2 composites derived from [Fe(pz)Ni(CN)4] Hofmann framework and MXene for efficient electromagnetic absorption

Gang Li,Ruiyang Tan,Xiangcheng Lu,Xinyu Zhang,Chengcheng Zhang,Bohong Gao,Yuting Zhou,Ke Chen,Ping Chen,Xinyi Wang

Chemical composition and morphological optimization are both effective strategies for constructing excellent electromagnetic wave absorption (EMWA) materials. While efficient EMWA materials derived from both metal-organic frameworks (MOFs) and MXenes have been extensively studied, composites derived from the Hofmann framework with MXene have not been reported. In this study, we employed a Hofmann framework ([Fe(pz)Ni(CN) 4 ], pz = pyrazine) and MXene (Ti 3 C 2 T x ) to create new MXene@Hofmann (MH1 and MH2) composites, using a simple co-precipitation method with two different contents of [Fe(pz)Ni(CN) 4 ]. The FeNi/C/TiO 2 composites with a multi-layered structure inherited from MXene were prepared by annealing the MXene@Hofmann composites at 500, 600, and 700 °C, resulting in the formation of MH1-500/600/700 and MH2-500/600/700 composites. Their compositions, morphologies, electromagnetic parameters, and EMWA performances were characterized. For the composites with a high [Fe(pz)Ni(CN) 4 ] content, MH2-600 has a minimum reflection loss ( RL min ) value of −30.63 dB at a thickness of only 1.8 mm and the broadest effective absorption bandwidth (EAB) of 3.90 GHz at 2.0 mm, while MH2-700 exhibits superior EMWA performance with an RL min value of −34.34 dB at 1.9 mm and an EAB value of 4.96 GHz at 2.1 mm. Their impressive EMWA performance might be attributed to the synergistic dielectric loss and magnetic loss and also the impedance matching from the reasonable ratio of the magnetic and dielectric components. This work demonstrates an effective strategy for constructing EMWA materials from the Hofmann framework and MXene.

CAS / MDL: 13877-16-2 290-37-9
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ACS Applied Materials & Interfaces · 2023 · IF 9.5

Approach to Significantly Enhancing the Electrochromic Performance of PANi by In Situ Electrodeposition of the PANi@MXene Composite Film

Yong Liu,Junyu Yuan,Yuqi Wang,Rongzong Zheng,Qibin Liu,Xiaojuan Shang,Jiaojing Shao,Zhongquan Wan,Junsheng Luo,Chunyang Jia

Electrochromic materials (ECMs) are capable of reversibly adjusting their transmittance or reflectance properties in response to changes in the external biasing voltages. In this study, we enhanced the electrochromic and electrochemical properties of polyaniline (PANi) effectively through the incorporation of MXene Ti2CTx using an in situ composite strategy. This improvement in the electrochromic and electrochemical properties observed can be attributed to the intermolecular forces between the aniline group of PANi and the terminal groups of MXene Ti2CTx sheets. The presence of hydrogen bonds between the PANi monomers and the MXene sheets was confirmed through theoretical calculations and photoluminescence results, which effectively improved the composite interfaces. Additionally, the PANi@MXene composite films were successfully prepared through a simple one-step in situ polymerization process, as verified by SEM and XPS characterization. The electrochemical studies revealed enhanced electronic conductivity, a high ion diffusion coefficient, and a narrow energy redox gap, all contributing to the excellent electrochemical properties observed. Overall, our results demonstrate that the MXene Ti2CTx composition effectively enhances the electrochromic performance of PANi. The PANi@MXene composite films exhibited a high optical modulation range, rapid switching response time, good thermal radiation regulation, and excellent operational stability. This composite strategy significantly improves the performance and practical applicability of ECMs.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
SURFACE & COATINGS TECHNOLOGY · 2023 · IF 5.4

A composite coating based on Ti3C2Tx MXene and M16 corrosion inhibitor for self-healing anti-corrosion and wear resistance

Chuanpeng Li,Yu Liu,Qiangliang Yu,Shuang Sun,Siyu Liu,Chen Zhao,Xingwei Wang,Shuangshuang Yang,Bo Yu,Meirong Cai,Feng Zhou,Weimin Liu

In this study, two-dimensional transition metal carbides and carbon nitride (MXene) and mesoporous silica nanoparticles (SiO 2 ) loaded with corrosion inhibitor 1-(3-((N-n-butyl) aminecarboxamido) propyl)-3-hexadecyl imidazolidin bromide (M16) were used to prepare a M16@MXene-SiO 2 nanocomposite with good anti-corrosion and wear resistance. The structure and composition of the nanocomposites were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared (FT-IR), thermogravimetric analysis (TGA) and X-ray photoelectron spectroscopy (XPS). The synthesized M16@MXene-SiO 2 nanocomposite was then added to an epoxy coating on Q235 carbon steel. The uniform distribution of M16@MXene-SiO 2 in the coating was confirmed by SEM and atomic force microscopy (AFM). The electrochemical impedance spectroscopy (EIS) test showed that the corrosion resistance of epoxy coating was the best when the addition amount of M16@MXene-SiO 2 was 5 wt%, and its electrochemical impedance could reach 5.98 × 10 9  Ω∙cm 2 . After 144 h immersion, the coating resistance (R c ) of the epoxy coating decreased to 3.88 × 10 3  Ω∙cm 2 , and that of the epoxy coating with M16@MXene-SiO 2 increased to 1.01 × 10 4  Ω∙cm 2 . The corrosion inhibition efficiency of M16@MXene-SiO 2 was tested by potentiodynamic polarization. After immersion for 24 h, the corrosion current density (I corr ) of the epoxy coating was 2.23 × 10 −7 A∙cm −2 , which reduced to 4.38 × 10 −8 A∙cm −2 after adding M16@MXene-SiO 2 and the corrosion inhibition efficiency increased by 80.36 %. In addition, the wear resistance of the epoxy coating was tested by reciprocating friction experiment. The friction coefficient of the epoxy coating decreased from 0.44 to 0.12 after adding 5 wt% M16@MXene-SiO 2 . The results showed that the composite coating had excellent corrosion resistance, self-healing properties and wear resistance. The improvement in corrosion could be explained by the filling of coating defects with MXene-SiO 2 and the formation of corrosion inhibitor films. The improvement of friction performance was mainly attributed to the friction transfer film formed by MXene-SiO 2 and M16.

CAS / MDL: 919-30-2
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ACS Applied Nano Materials · 2023 · IF 5.9

MXene Ti3C2Tx, EGaIn, and Carbon Nanotube Composites on Polyurethane Substrates for Strain Sensing, Electromagnetic Interference Shielding, and Joule Heating

Xinxin Li,Boxin Zhao,Wenjing Qin,Min Yang,Lei Feng,Changshun Gu,Zhenhao Tian,Hengchao Liu,Xiujie Guo,Yan Zhang,Shougen Yin

Developing multifunctional electronic fabrics with sensing capabilities, electromagnetic interference (EMI) shielding, and Joule heating performance holds great significance for health monitoring and medical protection. However, most fabrics struggle to combine multiple functions and optimize them simultaneously. For example, achieving both high sensitivity and a wide detection range in sensing devices remains a challenge. In this paper, we present a multidimensional composite structure comprising MXene Ti3C2Tx nano lamellar, self-assembled lotus leaf-like MXene/EGaIn and carbon nanotubes (CNTs) assembled on the surface of thermoplastic polyurethane to create a multifunctional MXene EGaIn/MXene CNT fabric (MEMC fabric). The multidimensional materials form a stable conductive network under tension. As a strain sensor, the MEMC fabric exhibits a large sensing range (0–360%) and ultra-high sensitivity (GF ∼ 114,700), making it suitable for artificial eardrum research. Additionally, MEMC demonstrates excellent EMI shielding effect (∼73 dB) and maintains good EMI shielding performance under tensile conditions. The fabric also showcases outstanding Joule heating performance (low voltage drive ∼2 V, fast heating time ∼13 s, and high heating stability ∼4000 s). This paper also demonstrates the multifunctional combination of MEMC fabrics, achieving simultaneous sensing, EMI shielding, and Joule heating functions under stretching. This work offers a forward-looking approach for constructing multifunctional composite fabrics, and the resulting MEMC composite materials hold potential applications in portable electronic devices and defense industries.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
MICROCHIMICA ACTA · 2023 ·Vol. 190 ·期 8 ·1-8 · IF 5.7

Label-free MXene-assisted field effect transistor for the determination of IL-6 in patients with kidney transplantation infection

Li Dawei,Ren Yaofei,Chen Ruoyang,Wu Haoyu,Zhuang Shaoyong,Zhang Ming

A spiral interdigitated MXene–assisted field effect transistor (SiMFETs) was proposed for determination of IL-6 in patients with kidney transplantation infection. Our SiMFETs demonstrated enhanced IL-6 detection range of 10 fg/mL–100 ng/mL due to the combination of optimized transistor’s structure and semiconducting nanocomposites. Specifically, on one hand, MXene-based field effect transistor drastically amplified the amperometric signal for determination of IL-6; on the other hand, the multiple spiral structure of interdigitated drain-source architecture improved the transconductance of FET biosensor. The developed SiMFETs biosensor demonstrated satisfactory stability for 2 months, and favorable reproducibility and selectivity against other biochemical interferences. The SiMFETs biosensor exhibited acceptable correlation coefficient ( R 2 =0.955) in quantification of clinical biosamples. The sensor successfully distinguished the infected patients from the health control with enhanced AUC of 0.939 (sensitivity of 91.7%, specificity of 86.7%). Those merits introduced here may pave an alternative strategy for transistor-based biosensor in point-of-care clinic applications. Graphical Abstract

CAS / MDL: 60-24-2 196506-01-1
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
Journal of Materials Chemistry A · 2023 ·Vol. 11 ·期 34 ·18323-18335 · IF 11.9

Fireproof ultrastrong all-natural cellulose nanofiber/montmorillonite-supported MXene nanocomposites with electromagnetic interference shielding and thermal management multifunctional applications

Rui Cheng,Ying Wu,Bin Wang,Jinsong Zeng,Jinpeng Li,Jun Xu,Wenhua Gao,Kefu Chen

To shield significantly serious radiation pollution and reduce fire disasters, fire-retardant MXene-based electromagnetic interference (EMI) shielding nanocomposites featuring superb mechanical properties are highly desired, but remain a major challenge to prepare. Here, we propose a Janus structural engineering strategy to manufacture all-natural cellulose nanofiber (CNF)/montmorillonite (MMT)-supported MXene papers (CMMPs) using a sequential deposition followed by hot-pressing. Inspired by natural nacre, MMT nanosheets are incorporated into CNFs to construct a substrate layer with a “brick-mortar” layered structure that serves to provide mechanical properties, while the independent MXene layer ensures electrical conductivity. The resultant CMMPs exhibit extraordinary mechanical performances involving a mechanical strength of 272.7 MPa and Young's modulus of 10.8 GPa, high electrical conductivity, and a superb EMI shielding effectiveness of 56.1 dB and EMI SE/t of 19 140.8 dB cm−1. Moreover, the designed CMMPs possess impressive flame-retardant and electro-/photothermal heating features, demonstrating their reliability, safety, and versatility. Therefore, such high-performance CMMPs developed by a facile and sustainable preparation strategy possess substantial application prospects in EMI shielding, thermal management, and fire protection.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING · 2023 · IF 8.7

Recorded low-reflection in gradient MXene-decorated melamine microwave shielding foam integrated with piezoresistive sensing and energy absorption properties

Ziran Du,Cheng Zhou,Hao-Yang Mi,Heng Li,Ziwei Qin,Ruyan Xu,Yaming Wang,Chuntai Liu,Changyu Shen

High-performance electromagnetic interference (EMI) shielding materials with low reflection are urgently required due to secondary electromagnetic pollution. MXene-based shielding materials often encounter a dilemma of high reflectance due to the high conductivity and permittivity of MXene , Herein, ecoflex-encased gradient MXene-decorated melamine foams (eGMMFs) are proposed to achieve both ultra-low reflection and efficient shielding. By designing a gradual increased gradient MXene conductive network and a reflector of reduced graphene oxide , the eGMMF integrates the impedance matching layer, loss layer, and reflective layer, which contributes to a average shielding efficiency of 78.8 dB and an reflection coefficient (R) of 0.022 in the X-band. A recorded low R value of 3.84 × 10 -5 is obtained at 11.52 GHz, which prevails over previously reported MXene-based shields. Meanwhile, the developed eGMMF shows a remarkable piezoresistive sensing and anti-impacting performance. This work provides a new vision and guidance for editing both shielding and absorbing materials integrated with multifunctionality.

CAS / MDL: 7789-24-4
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
TALANTA · 2023 · IF 6.1

MXene/zinc ion embedded agar/sodium alginate hydrogel for rapid and efficient sterilization with photothermal and chemical synergetic therapy

Yuwei Hu,Qin Zeng,Yifan Hu,Jinyun He,Heye Wang,Chunyan Deng,Dai Li

Bacterial infections can significantly impair wound healing. Therefore, it is essential to develop wound dressings with high antimicrobial activity. Hydrogels are often used as wound dressings due to their excellent physicochemical properties. Herein, by cross linking sodium alginate (SA), agar (AG) with Ti 3 C 2 T x MXene and Zinc ions (Zn 2+ ), a biosafe composite hydrogel (MSG-Zn 2+ ) was developed for fast and efficient sterilization treatment. The excellent photothermal properties of Ti 3 C 2 T x MXene and the chemical antimicrobial activity of Zn 2+ enable synergistic photothermal therapy (PTT)/chemical therapy in NIR biowindow with reduced power density and improved antimicrobial efficiency. More importantly, the incorporation of Zn 2+ can enhance the effective contact between the hydrogel and bacteria, benefiting both photothermal and chemical antibacteria. In vitro antibacterial experiments showed that MSG-Zn 2+ has a broad-spectrum antibacterial effect against Gram-positive Staphylococcus aureus ( S. aureus ) and Gram-negative Escherichia coli ( E. coli ). Cellular experiments showed that the hydrogel had excellent biocompatibility and the released Zn 2+ stimulated cell migration. In addition, the prepared MSG-Zn 2+ hydrogel has other advantages such as hydrophilic, high swelling, simple and low cost preparation, which meets the requirements of an economical wound dressing. This proposed work shows that this composite hydrogel MSG-Zn 2+ has great potential for practical antimicrobial wound dressing applications.

CAS / MDL: 25535-16-4
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2022 · IF 16.744

Bio-interface engineering of MXene nanosheets with immobilized lysozyme for light-enhanced enzymatic inactivation of methicillin-resistant Staphylococcus aureus

Daorui Zhang,Lunjie Huang,Da-Wen Sun,Hongbin Pu,Qingyi Wei

Being a unique biocatalyst to hydrolyse structural polysaccharides on the cell wall of bacteria, lysozyme can slow down bacterial resistance caused by antibiotic overdose treatments, however, efficient activation of lysozyme activities under pathogenic microenvironments remains challenging. Herein, a bio-interface engineering strategy was proposed for the remote modulation of thermoresistant lysozyme upon rationally designed photothermal nanoplatforms. For this, Ti 3 C 2 T X MXene nanosheets were functionalized by polydopamine (PDA) surface chemistry to enhance photothermal effects and performance durability, during which lysozyme biomacromolecules were immobilized at such a two-dimensional hybrid interface via intermolecular electrostatic affinity. The integrated nanoplatform (denoted as [email protected] @Lyso), with an optimal high light-to-heat conversion efficiency of 46.88%, realized not only precision control of local heat but also photo-responsive up-regulation for bio-catalysis of laden lysozyme. As a result, in vitro and in vivo antibacterial experiments revealed that [email protected] @Lyso could effectively inhibit the proliferation of methicillin-resistant Staphylococcus aureus and accelerated wound disinfection of mice with negligible biological toxicities. The outstanding antibacterial activities of [email protected] @Lyso were attributed to the photo-enhanced lysozyme activity, assisted by bacterial death caused by the mild local hyperthermia and the physical destruction derived from the [email protected] This work exemplified a solution to the bacterial resistance threats via stimuli-responsive enzymatic nanoplatforms.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2022 · IF 16.744

Valence-switchable and biocatalytic vanadium-based MXene nanoplatform with photothermal-enhanced dual enzyme-like activities for anti-infective therapy

Xiaoshuai Sun,Xiaojun He,Yue Zhu,Enoch Obeng,Bairui Zeng,Hui Deng,Jianliang Shen,Rongdang Hu

Nanocatalytic technology is a promising approach for anti-infective therapy based on artificial nanoscale enzyme mimics (nanozymes). Nevertheless, the complex infective microenvironment and single catalytic mechanism restrict the catalytic activity of nanozyme, making it difficult to achieve the desired therapeutic effect. Herein, we developed vanadium nitride MXene (V 2 N) by a modified chemical exfoliation approach. Benefiting from the valence-switchable state and large specific surface area of V 2 N, which possesses superior intrinsic dual enzyme-like (oxidase-like and peroxidase-like) catalytic activities in weak acidic conditions (mimic biofilm microenvironment). Typically, V 2 N exhibited desirable photothermal conversion efficiency (PCE) in the second near-infrared (NIR-II) window, which can remarkably enhance the dual enzyme-like catalytic activities and avoid local hyperthermia to damage surrounding normal tissue. These integrated merits enable the V 2 N to generate abundant reactive oxygen species (ROS) to effectively eradicate bacteria in vitro and promote the healing of subcutaneous abscesses with negligible toxicity in vivo . Overall, this work proposed a promising strategy based on photothermal-enhanced dual enzyme-like catalytic activities for effective anti-infective therapy.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
COMPOSITES SCIENCE AND TECHNOLOGY · 2022 · IF 9.879

Shape-stable MXene/sodium alginate/carbon nanotubes hybrid phase change material composites for efficient solar energy conversion and storage

Xingyun Ye,Yingjiao Ma,Zhuoyue Tian,Hanxue Sun,Zhaoqi Zhu,Jiyan Li,Weidong Liang,An Li

Photothermal energy conversion and storage though phase change materials (PCMs) composites is one of the ideal methods for the efficient utilization of solar energy which is regarded as the cleanest and most sustainable renewable energy. Herein, a series of Ti 3 C 2 -introduced PCMs composites were developed by melt-dipping method exploiting MXene/sodium alginate/carbon nanotubes (CNTs) hybrid aerogels as supporting materials and tetradecylamine (TDA) as the impregnated PCM. The utilization of MXene is to enhance the light absorption performance of PCM composites which has significantly improved their absorbance under an extremely high loading rate exceeding 91.0 wt%. This result contributed to a high photothermal energy conversion efficiency up to 84.95% and an excellent thermal energy storage density with a relatively high latent heat up to 217.8 kJ/kg. Notably, the hybrid TDA/aerogel composites also exhibited remarkable cycling and crystallinity stability; their melting enthalpy still maintain up to 192.0 kJ/kg after 300th thermal and cooling cycles. Additionally, the obtained PCM composites also possess marvelous mechanical property and enhanced thermal conductivity . The excellent comprehensive performance demonstrated that the resultant composites show great potential application in solar energy conversion and storage.

CAS / MDL: 7789-24-4 2016-42-4
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ANALYTICAL AND BIOANALYTICAL CHEMISTRY · 2022 ·Vol. 414 ·期 28 ·7967-7976 · IF 4.478

Real-time monitoring of 5-HT release from cells based on MXene hybrid single-walled carbon nanotubes modified electrode

Jiang Mengyuan,Tian Liang,Su Mengjie,Cao Xiaoqing,Jiang Qiyu,Huo Xiaolei,Yu Chunmei

Serotonin (5-HT) is an essential inhibitory neurotransmitter in vivo that is critical for interneuronal communication of the nervous system. Herein, we constructed an electrochemical cell-sensing platform for 5-HT detection based on MXene/single-walled carbon nanotubes (SWCNTs) nanocomposite. The one-dimensional SWCNTs with good electrical conductivity are uniformly dispersed on the surface and intermediate layers of the two-dimensional MXene to form a tightly heterogeneous heterostructure. The synthesized MXene-SWCNTs could improve the stacking problem of MXene nanosheets and expose more active sites, effectively promoting the conductive properties and electrochemical activity of the composite. The fabricated MXene-SWCNTs/GCE possessed outstanding detection capability for 5-HT with a wide linear range of 4 nM–103.2 μM and a low detection limit of 1.5 nM. Moreover, the sensor was further applied for the real-time monitoring trace amount of 5-HT releasing from different cell lines, which confirmed its promising applications in 5-HT related physiological and pathological fields. Graphical abstract MXene-SWCNTs/GCE was developed and applied for the real-time monitoring of trace amounts of 5-HT secreted from living cells.

CAS / MDL: 7664-39-3 153-98-0
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。