CELLULOSE
·
2022
·Vol. 29
·期 13
·7225-7249
·
IF 6.123
Tang Rui,Zhang Hanbing,Muhammad Yaseen,Lu Caimei,Liu Kun,Yu Sishan,Tong Zhangfa
Magnetic bentonite (MB) is a cheap, effective and recyclable adsorbent for the removal of many pollutants. However, further enhancing the adsorption performance of pristine MB and eliminating the instability of Fe 3 O 4 magnetic particles in MB are vital and urgent for practical applications. Based on the principles of washing mesh bag and octopus tentacle, mesh-bag-like modifiers with tentacle-like structure of octopus were synthesized via grafted reaction of polyethylenimine (PEI) and carboxymethyl cellulose (CMC) to cover MB. As compared with the pristine MB, CMC-MB and PEI-MB, the magnetic bentonite adsorbent co-modified by PEI and CMC (CMC/PEI-MB) exhibited more multi-adsorption sites, stronger capture effects of tentacle for heavy metals and more effective mesh-bag-protection for Fe 3 O 4 . Attributed to these fascinating properties, CMC/PEI-MB achieved faster adsorption rates (the values of k 2 of Pb(II) and Cd(II) were 73.0 g mg ‒1 min ‒1 and 17.4 g mg ‒1 min ‒1 ) and elevated adsorption capacities (760 mg g ‒1 and 470 mg g ‒1 ) for 1500 mg L ‒1 Pb(II) and 1000 mg L ‒1 Cd(II) in a wider pH range (3–7). Moreover, the reutilization rate of Pb(II) and Cd(II) over CMC/PEI-MB still remained 90% after five successive recycles. XRD and FT-IR results indicated that the structure of CMC/PEI-MB was well persevered after desorption, and the corresponding maximum desorption capacities of Pb(II) and Cd(II) from CMC/PEI-MB were 624 mg g ‒1 and 362 mg g ‒1 within 1 h, respectively. The findings of this study provide an interesting and effective approach for the construction of superior adsorbents basing on customary phenomena for the remediation of heavy metals from wastewater. Graphical Abstract
✓ 已验证
产品关联
DOI
高影响因子
Science China-Materials
·
2022
·Vol. 65
·期 12
·3452-3461
·
IF 8.64
Yang Lin,Yu Jinxing,Chang Shufang,Xu Xiaoxiang
LaTaON 2 is an attractive visible-light-active photocatalyst for water splitting due to its broad visible light absorption as far as 650 nm and proper band edge positions. Notwithstanding these promising properties, LaTaON 2 generally exhibits poor photocatalytic activity because of its high defect concentration that severely hinders charge separation. Here, LaTaON 2 has been modified by doping Al into the Ta sublattice, i.e., LaTa 1− x Al x O 1− y N 2− y (0 ≤ x ≤ 0.20). Al doping not only inhibits the defect concentration and increases surface hydrophilicity but also maintains the desired visible light absorption of LaTaON 2 . These important modifications substantially ameliorate the charge separation conditions within LaTaON 2 and are responsible for a much enhanced photocatalytic performance for water redox reactions under visible light illumination. Under optimal conditions, the Al-doped LaTaON 2 delivers an apparent quantum efficiency of 1.17% at 420 ± 20 nm for water oxidation into O 2 , outperforming most LaTaON 2 -based photocatalysts. These findings highlight Al as a useful dopant to open up the photocatalytic potential of metal oxynitrides whose activity is often undermined by a high defect concentration.
✓ 已验证
产品关联
DOI
高影响因子
Advanced Composites and Hybrid Materials
·
2022
·Vol. 5
·期 2
·1423-1432
·
IF 11.806
Xie Kehan,Wei Shijing,Alhadhrami A.,Liu Jie,Zhang Putao,Elnaggar Ashraf Y.,Zhang Feng,Mahmoud M. H. H.,Murugadoss Vignesh,El-Bahy Salah M.,Wang Feijiu,Li Chao,Li Guoqiang
Heterogeneous metal halide perovskites (MHPs) are of great interest in photovoltaic and photocatalytic applications because of their high photon-to-electron conversion efficiency. However, the improvement in the stability of heterogeneous MHP is still a great challenge and has rarely been reported for polar solvent–based photocatalytic applications. Herein, we report a precisely controllable synthesis of CsPbBr 3 /CsPb 2 Br 5 heterogeneous crystals into mesoporous hollow SiO 2 spheres to form the CsPbBr 3 /CsPb 2 Br 5 @SiO 2 yolk-shell microspheres. The composition modulation by simply adjusting the ratio of Cs + and Pb 2+ could result in the perovskite structure evolution from CsPbBr 3 to CsPbBr 3 /CsPb 2 Br 5 and CsPb 2 Br 5 . The prepared CsPbBr 3 /CsPb 2 Br 5 @SiO 2 were dispersed in the aqueous rhodamine B solutions and exhibited higher photocatalytic activities than the commercial TiO 2 (P25). The improvement in the photocatalytic efficiency is mainly caused by the formation of heterogeneous CsPbBr 3 /CsPb 2 Br 5 to boost the spatial charge separation efficiency. Graphical abstract
✓ 已验证
产品关联
DOI
高影响因子
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH
·
2022
·Vol. 30
·期 1
·1399-1412
·
IF 5.19
Chen Jun,Zhang Boding,Wang Bingxing,Zhang Wenlong,Wang Jichao,Cui Chengxing,Wang Songlin
Wastewater containing quinoline has become a common pollutant in water and soil environments, which poses a threat to human health due to its carcinogenicity, teratogenicity, and mutagenicity. Quinoline’s stability and toxicity hinders its degradation by conventional physicochemical and biological methods. In this contribution, Fe-Co-Bi/kaolin particle electrodes were prepared for the efficient degradation of quinoline in wastewater, and characterized by using scanning electron microscope, X-ray diffraction, pyridine-IR, Brunauer–Emmett–Teller, X-ray photoelectron spectroscopy, and four-probe resistivity test. Parameters affecting the degradation efficiency were optimized to be the particle electrode dosage of 40 g/L, pH 3.5, H 2 O 2 addition of 67.6 mmol/L, electrical conductivity of 12.7 ms/cm, and voltage of 20 V. The constructed three-dimensional catalytic particle electrode system (3D-CPE) achieved 92.1% removal rate of chemical oxygen demand (COD) under the optimal conditions. Hydroxyl radicals (•OH) generated in the 3D-CPE process were identified by radical scavenging tests and electron spin response analysis. To unravel the degradation mechanism, the intermediate products were identified by using high performance liquid chromatography-mass spectrometry. The degradation mechanism was discussed with the help of theoretical calculation.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHINESE JOURNAL OF POLYMER SCIENCE
·
2022
·Vol. 41
·期 4
·525-537
·
IF 3.815
Zhou Meng-Xue,Zhang Jia-Yu,Cai Xiao-Meng,Dou Rui,Ruan Li-Fo,Yang Wen-Jiang,Lin Wen-Chu,Chen Jun,Hu Yi
As one of the major challenges in tumor chemotherapy, multidrug resistance typically correlates with the poor drug penetration within tumor tissues and drug efflux by the ATP-driven efflux pumps in tumor cells. Herein, we design a kind of near-infrared (NIR) light- and acidity-activated micellar iPUTDN nanoparticle for mitochondria-targeting doxorubicin (DOX) delivery to combat DOX resistance in small-cell lung cancer. While the PEGylated iPUTDN nanoparticles can keep stealth in blood circulation, NIR irradiation at the tumor region can peel off the PEG shell from the nanoparticles, and the exposed iRGD can facilitate deep tumor penetration of the nanoparticles. After being internalized by DOX-resistant H69AR cells, the poly(β-aminoester)s (PAE)-based nanoparticles can release the triphenylphosphonium (TPP)-conjugated DOX (TDOX) into the cytosol, which can further accumulate in mitochondria with the aid of TPP. Consequently, the mitochondrial membrane potential and ATP content are both reduced in DOX-resistant H69AR cells. The in vivo therapeutic results show that TDOX-loaded nanoparticles with the aid of NIR light irradiation can effectively suppress the DOX-resistant small-cell lung cancer without noticeable adverse effects.
✓ 已验证
产品关联
DOI
高影响因子
ANALYTICAL AND BIOANALYTICAL CHEMISTRY
·
2022
·Vol. 414
·期 21
·6393-6402
·
IF 4.478
Guo Zhi-Yong,Yao Qiu-Hong,Zheng Wen-Hui,Jiao Rui-wen,Zhang Chen,Zhang Li,Ye Ting-Xiu,Chen Xi
New approaches for the engineering of well-defined, pore modality, and multi-chemical functionality nanocomposites are crucial to generate the next generation of functional materials with recoverable and easy preparation properties. Here, a catalyst and heat free polymerization reaction is exploited and fabricated zwitterionic system around magnetic nanoparticles. N-aminoethyl piperazine propane sulfonate (AEPPS) and dopamine (DA) are introduced as the zwitterionic system, which provided abundant zwitterionic groups (NH 2 , SO 3 − , N + ) and strong adhesion and various oxidation state properties. And that, the zwitterionic engineering will assemble between AEPPS and DA whereby Schiff base formation or Michael type addition. Whereafter, a series of sophisticated array of microscopic, spectroscopic, and structure techniques verify the formation of highly crosslinking internal zwitterionic architectures, well-defined core–shell structure, and better porosity. The zwitterionic structure–function relationships and striking porous structure are explored in a multi-interaction adsorption assay. The adsorption capacity of the magnetic nanocomposites was 1065.8 mg/g. And that, the system exhibited with hydrophilic-hydrophobic activity towards glycoprotein and better performance to bioactive protein (Ig-G) isolation form human whole blood sample. The synergistic enhancement interaction in hydrophilic target enrichment, easy preparation, and soft substrate properties of the AEPPS-DA zwitterionic materials make them intriguing candidates for sustainable biomedical loading and chromatographic separation.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
APPLIED MICROBIOLOGY AND BIOTECHNOLOGY
·
2022
·Vol. 106
·期 18
·6277-6287
·
IF 5.56
Yin Ru,Zhang Xue,Wang Beijia,Jia Jianbo,Wang Nana,Xie Chunyan,Su Peiyang,Xiao Pengfei,Wang Jianqiao,Xiao Tangfu,Yan Bing,Hirai Hirofumi
Abstract Environmental bisphenol F (BPF) has a cyclic endocrine disruption effect, seriously threatening animal and human health. It is frequently detected in environmental samples worldwide. For BPF remediation, biological methods are more environmentally friendly than physicochemical methods. White-rot fungi have been increasingly studied due to their potential capability to degrade environmental pollutants. Phanerochaete sordida YK-624 has been shown to degrade BPF by ligninolytic enzymes under ligninolytic conditions. In the present study, degradation of BPF under non-ligninolytic conditions (no production of ligninolytic enzymes) was investigated. Our results showed that BPF could be completely removed after 7-d incubation. A metabolite of BPF, 4,4’-dihydroxybenzophenone (DHBP) was identified by mass spectrometry and nuclear magnetic resonance, and DHBP was further degraded by this fungus to form 4-hydroxyphenyl 4-hydroxybenzoate (HPHB). DHBP and HPHB were the intermediate metabolites of BPF and would be further degraded by P. sordida YK-624. We also found that cytochrome P450s played an important role in BPF degradation. Additionally, transcriptomic analysis further supported the involvement of these enzymes in the action of BPF degradation. Therefore, BPF is transformed to DHBP and then to HPHB likely oxidized by cytochrome P450s in P. sordida YK-624. Furthermore, the toxicological studies demonstrated that the order of endocrine-disrupting activity for BPF and its metabolites was HPHB > BPF > DHBP. Key points
• White-rot fungus Phanerochaete sordida YK-624 could degrade BPF.
• Cytochrome P450s were involved in the BPF degradation.
• The order of endocrine disrupting activity was: HPHB > BPF > DHBP.
Graphical abstract
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Nature Communications
·
2022
·Vol. 13
·期 1
·1-10
·
IF 17.694
Wang Qichen,Feng Qingguo,Lei Yongpeng,Tang Shuaihao,Xu Liang,Xiong Yu,Fang Guozhao,Wang Yuchao,Yang Peiyao,Liu Jingjing,Liu Wei,Xiong Xiang
Quasi-solid-state Zn-air batteries are usually limited to relatively low-rate ability (<10 mA cm −2 ), which is caused in part by sluggish oxygen electrocatalysis and unstable electrochemical interfaces. Here we present a high-rate and robust quasi-solid-state Zn-air battery enabled by atomically dispersed cobalt sites anchored on wrinkled nitrogen doped graphene as the air cathode and a polyacrylamide organohydrogel electrolyte with its hydrogen-bond network modified by the addition of dimethyl sulfoxide. This design enables a cycling current density of 100 mA cm −2 over 50 h at 25 °C. A low-temperature cycling stability of over 300 h (at 0.5 mA cm −2 ) with over 90% capacity retention at −60 °C and a broad temperature adaptability (−60 to 60 °C) are also demonstrated.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
WORLD JOURNAL OF MICROBIOLOGY & BIOTECHNOLOGY
·
2022
·Vol. 38
·期 8
·1-11
·
IF 4.253
Xue Kai,Liu Chun-Li,Yang Yankun,Liu Xiuxia,Zhan Jinling,Bai Zhonghu
d -allulose is a rare low-calorie sugar that has many fundamental biological functions. d -allulose 3-epimerase from Agrobacterium tumefaciens (AT-DAEase) catalyzes the conversion of d -fructose to d -allulose. The enzyme has attracted considerable attention because of its mild catalytic properties. However, the bioconversion efficiency and reusability of AT-DAEase limit its industrial application. Magnetic metal–organic frameworks (MOFs) have uniform pore sizes and large surface areas and can facilitate mass transport and enhance the capacity for enzyme immobilization. Here, we successfully encapsulated cobalt-type AT-DAEase into the cobalt-based magnetic MOF ZIF-67@Fe 3 O 4 using a self-assembly strategy. We confirmed the immobilization of enzyme AT-DAEase and characterized the enzymatic properties of the MOF-immobilized AT-DAEase@ZIF-67@Fe 3 O 4 . The AT-DAEase@ZIF-67@Fe 3 O 4 nanoparticles had higher catalytic activity (65.1 U mg −1 ) and bioconversion ratio (38.1%) than the free AT-DAEase. The optimal conditions for maximum enzyme activity of the AT-DAEase@ZIF-67@Fe 3 O 4 nanoparticles were 55 °C and pH 8.0, which were significantly higher than those of the free AT-DAEase (50 °C and pH 7.5). The AT-DAEase@ZIF-67@Fe 3 O 4 nanoparticles displayed significantly improved thermal stability and excellent recycling performance, with 80% retention of enzyme activity at a temperature range of 45–70 °C and > 45% of its initial activity after eight cycles of enzyme use. The AT-DAEase@ZIF-67@Fe 3 O 4 nanoparticles have great potential for large-scale industrial preparation of d -allulose by immobilizing cobalt-type AT-DAEase into magnetic MOF ZIF-67@Fe 3 O 4 .
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHROMATOGRAPHIA
·
2022
·Vol. 85
·期 8
·733-741
·
IF 2.213
Zhang Qianchun,Wang Yutong,Yang Bingnian,Bao Linchun,Wu Yun,Wang Xingyi
Estrogen plays a crucial role in various stages of human development and is present in the human body at trace level; therefore, an efficient strategy for the quantitative analysis of trace estrogens is required. However, this analysis is complicated by the presence of extremely complex biological matrices. To address this challenge, a novel method based on monolithic column solid-phase microextraction and ultra-high-performance liquid chromatography-tandem mass spectrometry was developed for the sensitivity analysis of six estrogens: β-estradiol, α-estradiol, 17α-ethynylestradiol, estrone, diethylstilbestrol, and hexestrol, in human urine and serum samples. The method exhibits a low limit of detection (8.6–37 ng L −1 ), with wide linear ranges (0.10–25 μg L −1 ) for each analyte and remarkable correlation coefficients ( R 2 = 0.9953–0.9995). The developed method was successfully used to detect estrogens in urine and serum samples. The six analytes were satisfactorily recovered between 76.2 and 107% with relative standard deviations ranging from 2.5 to 8.3% ( n = 3). The results demonstrated that the developed method, based on a poly(methacrylic acid/3-acrylamidophenylboronic acid-co-ethylene glycol dimethacrylate) monolithic column, is an effective enrichment approach toward the analysis of trace estrogens in human urine and serum samples. Graphical abstract
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL RESEARCH IN CHINESE UNIVERSITIES
·
2022
·Vol. 38
·期 6
·1547-1552
·
IF 2.726
Jin Huan,Xu Ding,Tian Chao,Yue Yinghong,Hua Weiming,Gao Zi
A series of Sm-doped CeO 2 /Beta composite catalysts with various Sm/Ce atomic ratios(0.1–0.4) were prepared by an incipient impregnation method, followed by calcination at 650 °C. They were characterized by X-ray diffraction(XRD), N 2 adsorption, X-ray photoelectron spectroscopy(XPS), Raman, NH 3 -temperature programmed desorption(TPD) and CO 2 -TPD. The incorporation of Sm into CeO 2 /Beta increases obviously the propylene yield for the selective conversion of ethanol to propylene. The promoting effect of Sm on CeO 2 /Beta can be attributed to two reasons. One is more acetone intermediates are generated on the Sm-doped catalysts due to the enhanced formation of oxygen vacancies. The other is the conversion of acetone intermediate to propylene is enhanced owing to weaker and fewer acid sites on the Sm-doped catalysts.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE
·
2022
·Vol. 57
·期 33
·16080-16090
·
IF 4.682
Li Min,Zhang Mingpan,Mahar Faraz Khan,Wei Longqin,Wang Zhuopu,Wang Xujing,Wei Kai
Passive radiation cooling technology reflects sunlight and emits infrared thermal radiation into the cold outer space through the transparent window of the atmosphere (8–13 \(\mathrm{\mu m}\) ) without consuming any energy to cool objects. Therefore, it has potential application prospects in many fields and has attracted the wide attention of researchers. In recent years, photonic radiators and metamaterials have been studied in passive radiative cooling. However, they are usually not flexible, low ductility, complex shape and demand a high level of precision, which severely restricts large-scale manufacturing and limits their practical application. A simple and high-efficient electrospinning method with inexpensive raw materials is demonstrated for fabricating a high-performance fibrous and stretchable polymer nanofiber for daytime passive radiation cooling that consists of polyvinylidene fluoride and polydisperse silicon dioxide (SiO 2 ) microspheres. For effective scattering by nanofiber structures and silica microspheres, the membrane exhibits an average solar reflectivity of 92.3%. The molecular vibration of polyvinylidene fluoride and phonon polarization resonance of silica microspheres result in an average atmospheric window transmissivity of 0.86. The daytime cooling performance has experimentally demonstrated a maximum temperature decrease up to 5.8 °C under an average solar intensity of 700.8 W/m 2 . This work provides a promising method for the scale-up production of radiative coolers with high performance.
✓ 已验证
产品关联
DOI
高影响因子