APPLIED CATALYSIS B-ENVIRONMENTAL
·
2021
·
IF 19.503
Qian Chen,Xianjie Chen,Qiaorong Jiang,Zhiping Zheng,Zhijia Song,Zhiying Zhao,Zhaoxiong Xie,Qin Kuang
The internal electric field (IEF) has recently attracted intense attention in photocatalysis due to its extraordinary ability in accelerating charge separation and migration. In this work, it is found that IEF intensity can be effectively enhanced by constructing oxide/sulfide in-plane heterojunction from the pristine two-dimensional (2D) metal sulfides. Taking 2D In 2 S 3 nanosheet as a model, In 2 O 3 /In 2 S 3 in-plane heterojunction has been obtained via O 2 plasma technique, the IEF of which has been dramatically increased by 2.7 times. Benefitting from its enlarged IEF, In 2 O 3 /In 2 S 3 exhibits a 6.2 times improvement in terms of charge separation efficiency, reaching up to 5.6 %, accompanied by much faster charge migration. Thus, it has achieved a 6.4-fold increase of CH 4 yield in CO 2 photoreduction. Furthermore, the concept of IEF-induced better performance in oxide/sulfide in-plane heterojunction has been proved to be feasible toward other 2D sulfides, such as SnS 2 and ZnIn 2 S 4 . Overall, this work throws light on enhancing the IEF via in-plane heterojunction construction to improve the photocatalytic performance of 2D metal sulfides.
✓ 已验证
DOI
高影响因子
ACS Nano
·
2022
·
IF 18.027
De-Hui Guan,Xiao-Xue Wang,Fei Li,Li-Jun Zheng,Ma-Lin Li,Huan-Feng Wang,Ji-Jing Xu
At present, photoassisted Li–air batteries are considered to be an effective approach to overcome the sluggish reaction kinetics of the Li–air batteries. And, the organic liquid electrolyte is generally adopted by the current conventional photoassisted Li–air batteries. However, the superior catalytic activity of photoassisted cathode would in turn fasten the degradation of the organic liquid electrolyte, leading to limited battery cycling life. Herein, we tame the above limitation of the traditional liquid electrolyte system for Li-CO2 batteries by constructing a photoassisted all-solid-state Li-CO2 battery with an integrated bilayer Au@TiO2/Li1.5Al0.5Ge1.5(PO4)3 (LAGP)/LAGP (ATLL) framework, which can essentially improve battery stability. Taking advantage of photoelectric and photothermal effects, the Au@TiO2/LAGP layer enables the acceleration of the slow kinetics of the carbon dioxide reduction reaction and evolution reaction processes. The LAGP layer could resolve the problem of liquid electrolyte decomposition under illumination. The integrated double-layer LAGP framework endows the direct transportation of heat and Li+ in the entire system. The photoassisted all-solid-state Li-CO2 battery achieves an ultralow polarization of 0.25 V with illumination, as well as a high round-trip efficiency of 92.4%. Even at an extremely low temperature of −73 °C, the battery can still deliver a small polarization of 0.6 V by converting solar energy into heat to achieve self-heating. This study is not limited to the Li–air batteries but can also be applied to other battery systems, constituting a significant step toward the practical application of all-solid-state photoassisted Li–air batteries.
✓ 已验证
DOI
高影响因子
ACS Applied Polymer Materials
·
2024
·
IF 4.4
Ziru Yu,Zhenghua Guo,Liang Yu,Xiao Feng,Bo Wang
Various metal–organic framework (MOF)-based porous nanomaterials have been adopted to fabricate mixed matrix membranes (MMMs) aiming at breaking through the Robeson upper bound of individual polymer membranes for gas separation. However, the insufficient compatibility between the polymeric matrix and MOF nanofillers limits the further improvement of their gas separation performance. To overcome this challenge, we constructed relatively ideal Pebax/PEG/NH2–UiO-66 mixed matrix membranes inspired by θ solvent theory of polymer solutions. Polyethylene glycol (PEG) molecules were introduced to selectively swell the polar poly(tetramethylene oxide) (PTMO) domains of the Pebax matrix via hydrophobic–hydrophilic interactions and in turn furnished dispersed “nests” for NH2–UiO-66 nanofillers with polar nature to reduce the interparticle agglomeration (PEG nesting effect). MOF nanofillers tended to be relatively undisturbed, in which either the rigidity of polymer chains or the pore blocking of MOFs seen in unideal MMMs was restricted. The PEG “nesting effect” proposed herein could bring benefits to further improve the allowed maximum loading capacity of MOF nanofillers as well as adjust the interactions therein and therefore maximize the CO2 separation performance of Pebax/PEG/NH2–UiO-66 MMMs. Compared with individual Pebax membranes, Pebax/PEG/NH2–UiO-66 with a 15 wt % loading of NH2–UiO-66 showed a 73% higher CO2 permeability (210 barrer) and a 220% higher CO2/N2 selectivity (130), which demonstrated the most dramatical increases among Pebax-based MMMs until now and as well significantly exceeded the Robeson upper bound. Therefore, the proposed PEG “nesting effect” for the preparation of θ-type MMMs holds promising potential for membrane-based carbon capture and is possibly extended to the preparation of other MMMs.
✓ 已验证
产品关联
DOI
高影响因子
ACS Catalysis
·
2024
·
IF 11.3
Wenhang Wang,Kaixuan Huo,Yang Wang,Jinghao Xie,Xu Sun,Yingluo He,Meng Li,Jie Liang,Xinhua Gao,Guohui Yang,Simin Lin,Fengliang Cao,Hu Jiang,Mingbo Wu,Noritatsu Tsubaki
Oxygen vacancies (Ov) in reducible metal oxides are the vital active sites for methanol synthesis via a CO2 hydrogenation technology. However, the relationship between the density of Ov and the methanol synthesis performance is still ambiguous, and it still shows a lack of a versatile strategy to precisely tailor the number of Ov. In this study, with In2O3 as a representatively catalytic component, the density functional theory computation confirms that the Ov property, especially Ov density, is pivotal to enhancing methanol selectivity of CO2 hydrogenation by suppressing the undesirable reverse water–gas shift reaction for CO formation, which is attributed to the unique electronic density of In atoms around Ov. To verify the theoretical results, we report a protocol to optimize the concentration of Ov on In2O3 by sequential carbonization and oxidation (SCO) treatments of In-based metal–organic frameworks, during which the consumption of carbon species and the structural reconstruction of the In2O3 crystal regulated the particle size and Ov concentration of In2O3 by varying the oxidation temperature. The In2O3-5 catalyst carbonized and oxidized at 500 °C exhibits good methanol selectivity (72.3%) at a CO2 conversion of 9.9% under 330 °C, 3 MPa, and high space velocity of 12,000 L–1 kgcat–1 h–1. Multiple in situ characterizations clarify that the proposed Ov property regulating the SCO strategy is convenient to boost methanol synthesis by altering the CO2 hydrogenation process to the HCOO* intermediate-dominated pathway. Our work provides the catalyst design strategy and will shed light on the rational design of reducible metal oxide-based catalysts with a controllable Ov density.
✓ 已验证
产品关联
DOI
高影响因子
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
·
2024
·
IF 3.8
Xinyue Cheng,Xueyan Sun,Shiqiang Zheng,Wenjia Zhou,Zhen Yuan,Liangliang Zhu,Xi Chen
Direct air capture (DAC) of CO2 is emerging as an important technology to mitigate the environmental challenges posed by excessive carbon emissions. The development of reliable and affordable adsorbents has long been a topic of great interest in the DAC field. In this work, through a quaternization process, inexpensive and readily available plant-based biochars including walnut shell, cornstalk, rice husk, and long-stalked lentil shell were prepared as moisture-swing adsorbents to capture CO2 from ambient air. Among these biochar adsorbents, the most effective one was found to be the quaternized long-stalked lentil shell, whose CO2 adsorption capacity reached 0.88 mmol/g at 25 °C and 50% relative humidity, which is around five times that of previously reported biochar moisture-swing adsorbents (including bamboo cellulose and chitosan aerogel). Interestingly, different from the anion-exchange resin (the most studied moisture-swing adsorbent) whose adsorption capacity decreases progressively with increasing ambient humidity and the optimal adsorption requires a relative humidity below 5%, the adsorbents developed here obtained optimal adsorption performance at 50% relative humidity (at room temperature). This result greatly expands the suitable deployment area of moisture-swing DAC since the relative humidity of most land areas on earth is in the range of 40–80%.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2024
·
IF 13.3
Sensen Zhou,Yueli Wen,Bin Wang,Maohong Fan,Lu Ren,Zheng Cui,Wei Huang,Jing Li,Jianping Guo
CO 2 hydrogenation to C 2+ OH is an effective way to diminish CO 2 emissions. Although challenges still exist in large-scale applications, CuFeZn catalysts attract extensive attention due to their low-cost. Herein, CuFeZn catalysts are modified by different amounts of K 3 PO 4 , (KP) 0.1 CuFeZn exhibits an excellent catalytic performance (total alcohols selectivity of 15.76 % at CO 2 conversion of 38.10 %, C 2+ OH/ROH fraction of 94.23 %, and C 2+ alcohols space–time-yield (STY) of 53.81 mg·mL −1 ·h −1 ). Combined with a series of characterization results, it is found that the effect of K 3 PO 4 is complex, and the proportion of Fe 2+ , Cu 0 and medium base shows perfect linear relation to STY of C 2+ OH. The significance level of the above three factors is in the following sequence: Cu 0 >Fe 2+ >medium base. The introduction of K 3 PO 4 decreases the proportion of Fe 2+ (active site for RWGS, the competitive reaction for C–C coupling) and increases the proportion of Cu + /(Cu + +Cu 0 ) (Cu + is the active site for C–C coupling) due to the synergistic effect of Cu 0 and Cu + , thereby improving the synthesis of C 2+ OH. Moreover, conversion of Fe 0 to Fe 3 C or Fe 3 O 4 plays negative roles in the stability of the catalysts.
✓ 已验证
产品关联
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2025
·
IF 9
Yang Hong,Yan Zhou,Jiaqi Chen,linqian Qin,Yongqi Li,Yang Li,Hongyan Jiang,Huiyang Zhao,Jinzhu Wu,Xiaohong Wu
Advances in carbon capture and storage (CCS) technologies are critical for mitigating global climate change due to their low cost and operational simplicity. Although zeolites hold promise for carbon capture, the development of advanced zeolite materials with optimized CO 2 separation efficiency and diffusivity remains challenging. In this study, we present a quantum dot-regulated growth strategy, in which silicon quantum dots (SiQDs) act as heterogeneous seeds to not only initiate the growth of nanoscale zeolite units but also guide their assembly. The resulting 13X-SiQDs exhibit a distinct micrometer-scale hollow sphere structure composed of nanoscale zeolite units, which provide additional adsorption sites and mesopores, significantly enhancing adsorption and diffusion. The amino groups on the surface of the SiQDs further enable chemical adsorption with CO 2 , strengthening the binding force. The synergistic combination of thermodynamic and kinetic advantages enables 13X-SiQDs to achieve substantial improvements in CO 2 adsorption capacity (132.20 cm 3 ·g −1 ), CO 2 /N 2 selectivity (561), and diffusion rate. This quantum dot-regulated synthesis strategy offers a promising approach for designing advanced adsorption materials with high performance, extending their potential applications beyond carbon capture.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2024
·
IF 9.4
Feifei You,Tianhao Zhou,Jiaxin Li,Shihui Huang,Chuntao Chang,Xiaoyu Fan,Hao Zhang,Xiaohong Ma,Dawei Gao,Jian Qi,Danyang Li
Solar energy driving CO 2 reduction is a potential strategy that not only mitigates the greenhouse effect caused by high CO 2 level in atmosphere, but also yields carbon chemicals/fuels at the same time. Herein, a facile way to design the heterogeneous TiO 2 @In 2 S 3 hollow structures possessing robust light harvesting in both ultraviolet and visible regions is proposed and exhibits a higher generation rate of 25.35 and 1.24 μmol·g −1 ·h −1 for photocatalytic CO 2 reduction to CO and CH 4 , respectively. The excellent photocatalytic catalytic performance comes from i) the confined heterostructured TiO 2 @In 2 S 3 possesses a suitable band structure and a broadband-light absorbing capacity for CO 2 photoreduction, ii) the rich interfaces between nanosized TiO 2 and In 2 S 3 on the shell can significantly reduce the diffusion length of carriers and enhance the utilization efficiency of photogenerated electron-hole pairs, and iii) enriched surface oxygen vacancies can provide more active sites for CO 2 adsorption.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2024
·
IF 20.2
Yu Nie,Yanfang Li,Chao An,Xin Tan,Zhuofeng Hu,Jinhua Ye,Tao Yu
Ethylene production by CO 2 reduction is sluggish because the repulsive dipole-dipole interaction and 12 proton-coupled electron-transfer steps consecutively. Amorphous structured photocatalysts possess few grain boundaries and abundant unsaturated sites, accelerating the reaction efficiency from the angle of dynamics and thermodynamics, which still not yet be used in PCR to C 2 products currently. Herein, an amorphous Cu x CoS y composed of the minority crystalline CuCo 2 S 4 is fabricated to realize an excellent C 2 H 4 selectivity in terms of R electron (94.9%). Unsaturated Co and S play the key roles in the improved efficiency of C 2 H 4 generation. C-C coupling is achieved via shortening Co-S bonds distance, and *CO-*CO coupling barrier is decreased by more electrons accumulated on unsaturated S. Water is adsorbed on Co adjacent to S and provide protons for *COCO to form *CH 2 = C. This work paves a new way for broadening the efficient of C 2 H 4 photocatalytic evolution using amorphous photocatalyst.
✓ 已验证
产品关联
DOI
高影响因子
Chemistry-An Asian Journal
·
2024
·
IF 3.5
Yicheng Wang,Qiyu Zhang,Chenxu Wang,Ayeza,Yating Zhang,Chao Hu
The utilization of renewable energy for electrocatalytic carbon dioxide reduction reaction (CO 2 RR) represents a pivotal technology in sustainable carbon conversion. Single-atom catalysts (SACs) featuring transition metal-nitrogen-carbon (M−N−C) structures have demonstrated exceptional electrocatalytic efficacy in CO 2 RR by maximizing atom efficiency. Nevertheless, further investigation is warranted to optimize the catalytic performance of SACs through the selection of suitable carbon sources and supports, as well as the modulation of the microenvironment surrounding individual metal atoms. In this study, a sulfur-doped Ni−N−C catalyst was prepared using a two-step strategy involving metal ion adsorption and thermal decomposition, with porous ion exchange resin serving as the carbon source. Due to the uniform distribution of single atom active centers on the resin-based carbon support and sulfur doping, this catalyst efficiently converts CO 2 into CO with a Faradaic efficiency exceeding 90 % within the range of −0.69~−1.29 V (vs. RHE), reaching a maximum value of 97.7 % (−0.79 V vs. RHE). Theoretical calculations indicate that second-shell sulfur doping effectively promotes coupled transfer of protons and electrons, leading to a significant reduction in Gibbs free energy barriers for CO 2 RR intermediate products.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Materials Chemistry C
·
2025
·
IF 5.1
Shuang Xu,Lei Yang,Congya Wang,Liwei Pan,Jing Zhang,Yaling Wang,Hexiang Zhong
With the rapid development of industry, large-scale fossil energy consumption leads to the increase of atmospheric CO2 concentration and the resultant deteriorating global warming. The electrochemical reduction of CO2 (ERCO2) technology is a potential strategy to achieve the CO2 emissions reduction and to realize carbon recycling. However, the lack of high product selective, active and stable catalysts is one of the remaining challenges for the industrial applications of ERCO2. Herein, an electrochemical oxidation-reduction reconstruction method is developed to reconstruct the copper network without extra Cu salt addition obtaining Cu2O-Cu (111) catalysts with nanoporous structures for improving the selectivity and activity of CH4 and C2H4 product. The oxidation-reduction reconstruction derived catalyst achieves improved faradaic efficiency of 56.63% for CH4 product and a partial current density of 41.6 mA cm-2 at -1.38 V (vs. RHE). The selectivity and activity toward C2H4 are also improved. The catalytic superiority originates from synergistic interplay between the Cu₂O-Cu heterogeneous interface and high electrochemical active surface area. Additionally, the presence of abundant oxygen vacancies at the Cu2O-Cu interface accelerate the electron transfer process and promote the high selectivity and activity toward CO2-to-CH4. This study paves a new way for enhancing the selectivity and activity of CO2 electrocatalytic conversion to CH4.
✓ 已验证
产品关联
DOI
高影响因子
POLYMER BULLETIN
·
2025
·
IF 4
Zhang Chengpeng,Bei Pengzhi,Liu Hongjing,Zhao Xu,Shi Meiling,Jing Xiaochun,Li Zhao,Yao Hui
A novel porous liquid, M2070-UiO-66-OH@[BMim][PF 6 ], has been synthesized using zirconium-based metal–organic framework (UiO-66-OH), 1-butyl-3-methylimidazolium hexafluorophosphate ([BMim][PF 6 ]) and polyetheramine M2070. To enhance the CO 2 separation performance, M2070-UiO-66-OH@[BMim][PF 6 ] was incorporated as a filler into a mixed matrix membrane (MMM) using polyether block amide (Pebax-1657) as the membrane matrix. The properties of the synthesized M2070-UiO-66-OH@[BMim][PF 6 ] and the resulting MMMs have been characterized through FTIR, TGA, DSC, and SEM analyses. The results of porous liquid stability revealed that grafting polyetheramine M2070 onto the surface of UiO-66-OH@[BMim][PF 6 ] significantly increased the steric hindrance, thereby preventing agglomeration within the membrane. Additionally, the functional groups (amino and ether) present in M2070-UiO-66-OH@[BMim][PF 6 ] contributed to an increased number of active sites for CO 2 adsorption, facilitating enhanced CO 2 transport through the membrane. Compared to the Pebax membrane, the MMM containing 3% M2070-UiO-66-OH@[BMim][PF 6 ] exhibited significantly improved CO 2 permeability of 104.07 Barrer (an increase of 73.22%) and CO 2 /N 2 selectivity of 92.37 (an increase of 148.95%) at 30 °C and 0.3 MPa, surpassing the 2008 Robeson upper bound. These findings suggest that M2070-UiO-66-OH@[BMim][PF 6 ] is a highly promising additive for the fabrication of mixed matrix membranes with superior CO 2 separation performance. Graphical abstract A porous liquid, (M2070-UiO-66-OH@[BMim][PF 6 ]) has been prepared using UiO-66-OH@[BMim][PF 6 ] as the core and polyetheramine M2070 as the canopy. Afterwards, M2070-UiO-66-OH@[BMim][PF 6 ] has been added to the Pebax matrix to prepare M2070-UiO-66-OH@[BMim][PF 6 ]/Pebax mixed matrix membranes, which have been subjected to gas separation studies.
✓ 已验证
产品关联
DOI
高影响因子