ACS Catalysis
·
2024
·
IF 11.3
Jun Tong,Na Ni,Baowen Zhou,Chongqing Yang,Kolan Madhav Reddy,Hengyong Tu,Yusi Liu,Zhe Tan,Longkai Xiang,Haozhen Li,Xing Zhou,Yunyi Zhang,Yixin Li,Hanchao Zhang,Lei Zhu,Zhen Huang
Ni-based cermet materials still persist as pronounced challenges for electrocatalysts in solid oxide electrolysis cells (SOECs), due to their insufficient CO2 catalytic efficiency and inferior resistance to oxidation. In this paper, a (Fe,Co,Ni,Cu,Mo) quinary high-entropy alloy is explored as an alternative cathode material, offering enhanced performance in the co-electrolysis of H2O and CO2 for renewable syngas production. In comparison to traditional nickel-based cathodes, an assembled SOEC employing the as-designed quinary high-entropy alloy exhibits a remarkable increase in CO2 conversion capacity and significantly enhanced oxidation resistance. In addition, the electrolysis current density increases by 18%, and a stability test for more than 110 h reveals no degradation. Moreover, the stability can be maintained for up to 40 h even without any protective gas. Morphological and spectroscopic analyses, coupled with density functional theory (DFT) calculations, elucidate that the high-entropy effect facilitates surface electron redistribution, which in turn contributes to the measurable activity by reducing the energy barrier of CO2 activation. Notably, the superior resistance to oxidation primarily originates from the in situ-formed spinel phase under oxidation conditions. This study demonstrates the satisfying performance of high-entropy alloys as cathode materials in SOEC, validating their high application potential in this field.
✓ 已验证
DOI
高影响因子
NANOTECHNOLOGY
·
2021
·Vol. 32
·期 47
·475506
·
IF 3.874
Jiawen Shi,Sen Liu,Peng Zhang,Ning Sui,Shuang Cao,Tingting Zhou,Tong Zhang
Methane (CH4) gas sensors play an important role in industrial safety and detection of indoor gas quality. In general, metal oxide semiconductor sensing materials with nano-structure have high responses to the target gas. However, the sensor resistance is usually very high. Considering the practical application, it is vital to reduce base resistance and improve sensitivity for gas sensors. Herein, Pd-doped SnO2 nanoparticles were prepared as the basis material by a simple sol-gel method. In order to adjust the resistance, the pentavalent metal element (Sb) was introduced via a simple doping route. As CH4 sensing layers, the prepared SnO2-sensors doped with Pd and Sb exhibited the most obvious resistance reduction effect. Meantime, excellent sensing performances including high response, fast response/recovery time, excellent reproducibility and great stability were also obtained. In-depth research has shown that the ability to reduce resistance depends on the effective internal doping of cation with high valence. The enhanced sensing capability can be attributed to the 'synergistic effects' including catalytic effects of novel metals, increased oxygen vacancies and decreased band gap energy. This work can provide a new opportunity to design metal oxide sensing materials with low resistance and high sensitivity.
✓ 已验证
DOI
高影响因子
JOURNAL OF SUPERCRITICAL FLUIDS
·
2020
·
IF 3.744
Jie Sun,Lujiang Xu,Guo-hua Dong,Sonil Nanda,Hu Li,Zhen Fang,Janusz A. Kozinski,Ajay K. Dalai
Nickel-based catalysts with different supports and cobalt loadings were synthesized for hydrothermal gasification of cellulose at 350 °C. The activity of Ni catalysts was found in the order of Al 2 O 3 > spent bleaching clay ash > SiO 2 with H 2 yield of 80.6%, 69.0% and 57.0%. When 6 wt. % Co was added, 10Ni-6Co/Al 2 O 3 showed the highest H 2 yield of 88.4% i.e., 1.44 times that without Co addition. Catalysts were characterized by NH 3 -TPD, TPR, XRD, BET and XPS, showing that Ni-Co alloy formation promoted H 2 production. Single-factor experiments were conducted to study variables in the presence of 10Ni-6Co/Al 2 O 3 with the selected conditions of 0.5 g biomass and 20 min at 350 °C (achieving 94.9% H 2 yield from cellulose) for gasification of rice straw, peanut shell and cotton straw with the increase in H 2 yield by 51.4, 76.0 and 67.8 times. Ni-Co/Al 2 O 3 catalysts enhanced hydrothermal gasification of actual agricultural residues.
✓ 已验证
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2021
·
IF 9.229
Liubing Fan,Kunjie Liu,Qindan Zeng,Mingyang Li,Hao Cai,Jun Zhou,Shihui He,Jing Zhao,Quanlin Liu
Organic–inorganic hybrid metal halides have attracted widespread attention as emerging optoelectronic materials, especially in solid-state lighting, where they can be used as single-component white-light phosphors for white light-emitting diodes. Herein, we have successfully synthesized a zero-dimensional (0D) organic–inorganic hybrid mixed-metal halide (Bmpip)2PbxSn1–xBr4 (0 < x < 1, Bmpip+ = 1-butyl-1-methyl-piperidinium, C10H22N+) that crystallizes in a monoclinic system in the C2/c space group. Pb2+ and Sn2+ form a four-coordinate seesaw structure separated by organic cations forming a 0D structure. For different excitation wavelengths, (Bmpip)2PbxSn1–xBr4 (0 < x < 1) exhibits double-peaked emission at 470 and 670 nm. The emission color of (Bmpip)2PbxSn1–xBr4 can be easily tuned from orange-red to blue by adjusting the Pb/Sn molar ratio or excitation wavelength. Representatively, (Bmpip)2Pb0.16Sn0.84Br4 exhibits approximately white-light emission with high photoluminescence quantum yield up to 39%. Interestingly, the color of (Bmpip)2PbxSn1–xBr4 can also be easily tuned by temperature, promising its potential for application in temperature measurement and indication. Phosphor-converted light-emitting diodes are fabricated by combining (Bmpip)2PbxSn1–xBr4 and 365 nm near-UV LED chips and exhibit high-quality light output.
✓ 已验证
DOI
高影响因子
Nature Communications
·
2020
·Vol. 11
·期 1
·1-13
·
IF 12.121
Zhao Fulai,Feng Yiyu,Wang Yu,Zhang Xin,Liang Xuejing,Li Zhen,Zhang Fei,Wang Tuo,Gong Jinlong,Feng Wei
The discovery of graphene and graphene-like two-dimensional materials has brought fresh vitality to the field of photocatalysis. Bandgap engineering has always been an effective way to make semiconductors more suitable for specific applications such as photocatalysis and optoelectronics. Achieving control over the bandgap helps to improve the light absorption capacity of the semiconductor materials, thereby improving the photocatalytic performance. This work reports two-dimensional −H/−OH terminal-substituted siligenes (gersiloxenes) with tunable bandgap. All gersiloxenes are direct-gap semiconductors and have wide range of light absorption and suitable band positions for light driven water reduction into H 2 , and CO 2 reduction to CO under mild conditions. The gersiloxene with the best performance can provide a maximum CO production of 6.91 mmol g −1 h −1 , and a high apparent quantum efficiency (AQE) of 5.95% at 420 nm. This work may open up new insights into the discovery, research and application of new two-dimensional materials in photocatalysis.
✓ 已验证
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2023
·
IF 9.9
Mengwei Han,Yuzhu Qian,Xinni Li,Nailiang Wang,Ting Song,Li Liu,Xianyou Wang,Xiongwei Wu,Man-Kay Law,Bei Long
Developing insertion-type anode is key to advancing “rocking chair” zinc-ion batteries, though there are few reported insertion-type anodes. Herein, the Bi 2 O 2 CO 3 is a high-potential anode, with a special layered structure. A one-step hydrothermal method was used to prepare Ni-doped Bi 2 O 2 CO 3 nanosheet , and also a free-standing electrode consisting of Ni-Bi 2 O 2 CO 3 and CNTs was designed. Both cross-linked CNTs conductive networks and Ni doping improve charge transfer. Ex situ tests (XRD, XPS, TEM, etc.) reveal the H + /Zn 2+ co-insertion mechanism of Bi 2 O 2 CO 3 and that Ni doping improves its electrochemical reversibility and structural stability. Therefore, this optimized electrode offers a high specific capacity of 159 mAh g −1 at 100 mA g −1 , a suitable average discharge voltage of ≈0.400 V, and a long-term cycling stability of 2200 cycles at 700 mA g −1 . Besides, the Ni-Bi 2 O 2 CO 3 //MnO 2 “rocking chair” zinc-ion battery (based on the total mass of cathode and anode) delivers a high capacity of ≈100 mAh g −1 at 50.0 mA g −1 . This work provides a reference for designing high-performance anode in zinc-ion batteries.
✓ 已验证
DOI
高影响因子
Small
·
2023
·Vol. 19
·期 23
·2300106
·
IF 13.3
Ziqin Liu,Xin Dong,Jing Wen,Pu Hu,Chaoqun Shang
The high reactivity of Li metal and the inhomogeneous Li deposition leads to the formation of Li dendrites and “dead” Li, which impedes the performance of Li metal batteries (LMBs) with high energy density. The regulating and guiding the Li dendrite nucleation is a desirable tactic to realize concentrated distribution of Li dendrites instead of completely inhibiting dendrite formation. Here, a Fe-Co-based Prussian blue analog with hollow and open framework (H-PBA) is employed to modify the commercial polypropylene separator (PP@H-PBA). This functional PP@H-PBA can guide the lithium dendrite growth to form uniform lithium deposition and activate the inactive Li. In details, the H-PBA with macroporous structure and open framework can induce the growth of lithium dendrites via space confinement, while the positive Fe/Co-sites lowered by polar cyanide (−CN) of PBA can reactivate the inactive Li. Thus, the Li|PP@H-PBA|Li symmetric cells exhibit long-term stability at 1 mA cm −2 for 1 mAh cm −2 over 500 h. And the Li-S batteries with PP@H-PBA deliver favorable cycling performance at 500 mA g −1 for 200 cycles.
✓ 已验证
DOI
高影响因子
JOURNAL OF THE AMERICAN CERAMIC SOCIETY
·
2023
·Vol. 106
·期 8
·4818-4830
·
IF 3.9
Qianwen Cao,Liang Li,Jing Xie,Yuan Feng,Wenming Wang,Yan Pan,Xiantao Wei,Yong Li
Phosphors doped with Mn 4+ ions have strong emission in the red and far-red light regions and are therefore used as red phosphors for indoor plant cultivation light-emitting diodes (LEDs) and white LEDs (w-LEDs). This paper introduces La 2 Mg(Mg 1/3 Ta 2/3 )O 6 : Mn 4+ (Mg 2 La 3 TaO 9 : Mn 4+ ) red phosphors prepared by conventional high-temperature solid-phase method. The broad excitation band of Mg 2 La 3 TaO 9 : Mn 4+ phosphor is effectively excited by ultraviolet and blue light in the range of 250–600 nm, with the emission of 707 nm centered on far-red light. The phosphor has a high color purity of 99.07% and an internal quantum efficiency of 59.87%. To further enhance the performance of the phosphor, a cation substitution method was adopted in this paper to synthesize La 2 Mg(Al 1/2 Ta 1/2 )O 6 : Mn 4+ phosphor by replacing [1/3Mg 2+ –2/3Ta 5+ ] in La 2 Mg(Mg 1/3 Ta 2/3 )O 6 : Mn 4+ with [1/2Al 3+ –1/2Ta 5+ ]. The luminescence intensity and thermal stability of the samples were enhanced. The emission spectrum of the Mg 2 La 3 TaO 9 : Mn 4+ samples matched well with the phytochrome P FR (phytochrome that absorbs far-red light) and is suitable for the preparation of LEDs for indoor plant cultivation. The concentration quenching effect of the samples was investigated, the main mechanism of which is the electric dipole–dipole interaction. Red LEDs and w-LEDs devices were prepared with the synthesized phosphors that produce light stably at different currents. The w-LEDs have a correlated color temperature of 5310 K and a color rendering index of 80.1. Therefore, these samples are expected to be used as red components for w-LEDs.
✓ 已验证
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2021
·
IF 9.229
Zhanxiang Yin,Zhongyuan Liu,Yuan Yu,Cunyin Zhang,Peng Chen,Jianxun Zhao,Pan He,Xin Guo
Polycrystalline BiCuSeO is considered as a promising thermoelectric material due to its intrinsically low thermal conductivity and moderate Seebeck coefficient. However, its low electrical conductivity and coupled electron–phonon transport properties restrict the further improvement of the thermoelectric performance. In this work, Pb and Yb dopants are incorporated into BiCuSeO to substitute for Bi sites via ball milling and high-pressure and high-temperature sintering, leading to a synergistic optimization of the electron and phonon transport and improved thermoelectric performance. The carrier concentration exhibits an enhancement with increasing Pb&Yb co-doping contents. Meanwhile, the decreased carrier mobility is suppressed appropriately by coordinating with the interplay of Pb and Yb dopants on the electronic structure. Besides, Pb&Yb co-doping combined with high-pressure and high-temperature sintering introduces abundant grain boundaries, dislocations, and point defects to effectively decrease the lattice thermal conductivity by scattering phonons in a broad frequency range. Coupled with the synergistic optimization of the electrical and thermal properties, a maximum zT of 1.2 is achieved in Bi0.88Pb0.06Yb0.06CuSeO at 850 K, which significantly outperforms the majority of oxygen-containing thermoelectric materials. Our study suggests that dual doping of bivalent ions and rare-earth elements at Bi sites is an effective strategy for improving the thermoelectric performance of BiCuSeO.
✓ 已验证
DOI
高影响因子
ACS Applied Nano Materials
·
2021
·
IF 5.097
Zewei Jia,Shangbo Ning,Yuxin Tong,Xin Chen,Huilin Hu,Lequan Liu,Jinhua Ye,Defa Wang
Photothermal reverse water gas shift reaction is one of the promising methods to palliate global energy and environmental issues. Searching for catalysts with high activity and CO selectivity for CO2 conversion has been attracting extensive attention. In this work, Ni nanoparticle-loaded N-doped CeO2 (Ni/N-CeO2) composite catalysts were synthesized using a three-step method. Under light irradiation, the optimal Ni/N5.0-CeO2 exhibited a CO yield rate of 20.9 mmol·gcat–1·h–1 with almost 100% of CO selectivity via photothermal CO2 reduction. As a comparison, Ni/CeO2, without nitrogen doping, showed a high CH4 selectivity. The strong light absorption of Ni/N5.0-CeO2 mainly by loading of Ni nanoparticles and the enhanced adsorption/activation of CO2 molecules due to increased oxygen vacancies in N5.0-CeO2 by N-doping were supposed to account for the excellent catalytic performances. The doping of nitrogen was of particular importance for the formation of N–H bonds, which could modulate the reaction pathway for promoting the reduction of CO2 toward CO while suppressing the undesirable CO2 methanation process.
✓ 已验证
DOI
高影响因子
MICROPOROUS AND MESOPOROUS MATERIALS
·
2016
·
IF 3.349
Mingming Zou,Honghong Liu,Lu Feng,Fengqiang Xiong,Tiju Thomas,Minghui Yang
A simple solvothermal approach with post-calcination is used to obtain (Ag, Ag 2 O) co-loaded TiO 2 microspheres with high specific surface area (43.8 m 2 g -1 ) and desirable visible light photocatalytic degradation (64% after 2 h visible light irradiation). Generally, N-doping of TiO 2 via nitridation using NH 3 improves the visible light absorption property of material. However, nitridation of (Ag, Ag 2 O) co-loaded TiO 2 results in a deleterious impact on the photocatalytic performance (around 20% after 2 h visible light irradiation). This is because nitridation of Ag-Ag 2 O-TiO 2 results in (a) reduction of Ag 2 O to Ag and (b) Ag agglomeration and grain growth on TiO 2 particles. These results in fact imply that in as-synthesized (Ag, Ag 2 O) co-loaded TiO 2 systems, local surface plasmonic resonance (associated with of 5–12 nm Ag particles) aids in enhanced broad band visible light absorption; furthermore the heterojunction between TiO 2 and Ag 2 O improves efficiency with which photogenerated carriers become available for photocatalysis . In all cases we show through selective radical quenching experiments that singlet oxygen is the primary reason for the dye degradation observed.
✓ 已验证
DOI
高影响因子
PHYSICAL CHEMISTRY CHEMICAL PHYSICS
·
2022
·Vol. 24
·期 18
·10838-10850
·
IF 3.945
Wei Deng,Yuping Gai,Haitao Duan,Zhide Chen,Xiaojun Hu,Sheng Han,Niwei Xu,Shanlin Qiao,Zijian Yao,Fei Jiang
Although reasonably specified and adjustable preparation of nanostructures with specific morphologies, ordered chemical compositions and electronic structures involving advanced energy chemistries is an important research area, high-efficiency, stable, and low-cost electrocatalysts for water splitting are greatly desirable and challenging. In this study, partially delocalized Co–S–Se ultra-thin nanosheets are obtained via a liquid–liquid interface-mediated strategy at an oil–water interface. These Co–S–Se ultra-thin nanosheets exhibit different-sized lamellar structures and have an average thickness of 0.83 nm. The ternary ultra-thin Co0.45S0.38Se0.17 nanosheets demonstrate excellent performance for the OER, accompanied by an overpotential of 290 mV (1.52 V vs. RHE) at 10 mA cm−2, and a Tafel slope of 74.5 mV dec−1. In the meantime, the catalyst recombined with a stoichiometry NiOx catalyst to form a composite interface, which also exhibited a good OER performance, with an overpotential of 260 mV at 10 mA cm−2 and a smaller Tafel slope of 53.9 mV dec−1. The nanosheets can rearrange the electronic density near the metal catalytic centers and increase the electron transfer. DFT calculations indicate that the partially delocalized charges can improve electrocatalytic performances, demonstrating modulated electroreduction properties. Due to the special atomic and electronic structure of the ternary transition metal alloy chalcogenide, the compound has great potential for energy storage, which will help in the rational design and synthesis of high-efficiency electrocatalysts.
✓ 已验证
DOI
高影响因子