文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第3001至3012个,产品总数3,922个

切换升序
MXene
CHEMICAL ENGINEERING JOURNAL · 2021 · IF 13.273

Tough and electrically conductive Ti3C2Tx MXene–based core–shell fibers for high–performance electromagnetic interference shielding and heating application

Liu-Xin Liu,Wei Chen,Hao-Bin Zhang,Yu Zhang,Pingping Tang,Danyang Li,Zhiming Deng,Lvxuan Ye,Zhong-Zhen Yu

Although transition metal carbide (MXene) fibers are highly electrically conductive, the poor spinnability of neat MXene dispersion and the brittleness of the conductive fibers limit their applications. Herein, a coaxial wet spinning assembly strategy is adopted to fabricate mechanically strong and electrically conductive Ti 3 C 2 T x MXene-based core–shell fibers with regenerated cellulose (RC) as the tough component and graphene oxide/MXene (GM) as the conductive components. By an optimal structure design, the hollow RC@GM 90 fiber with the RC shell exhibits an increased strength of 134.7 MPa, a high toughness of 14.1 MJ m −3 , a large elongation at break of 13%, and a high conductivity of 2.37×10 3 S m −1 . By sewing on a textile substrate, the hollow RC@MXene fibers with a high conductivity of 3.68×10 4 S m −1 provide an extraordinary electromagnetic interference shielding efficiency of over 90 dB and outstanding solar-thermal energy conversion performances. Similarly, by improving spinnability of the MXene spinning dope with an aqueous dispersion of GO, solid core–shell GM@RC fibers with conductive GM shells are fabricated by the coaxial spinning, and the chemically reduced GM@RC fibers exhibit a high conductivity of 9.90×10 4 S m −1 and excellent electro-thermal energy conversion performances.

CAS / MDL: 7789-24-4 1310-65-2
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF ALLOYS AND COMPOUNDS · 2021 · IF 5.316

Hydrothermal ion exchange synthesis of CoM(M=Fe or Mn)/MXene 2D/2D hierarchal architectures for enhanced energy storage

Richao Niu,Rubing Han,Yin Huang,Liming Dai,Hongan Zhao,Yining Wang,Junwu Zhu,Shaochun Tang,Jingwen Sun

Bimetallic compounds can offer higher electrochemical activity and capacity than monometallic ones owing to their rich chemical valences. Herein, the performance enhancement of monometallic compounds by introducing metal ions was demonstrated, and the effects of different metal ions were investigated. Through introduction of metal ions into LDHs under a hydrothermal environment, one kind of 2D/2D hierarchical CoM-LDH(M=Fe or Mn)/MXene composites were successfully synthesized. It was found that the introduced Fe ions extremely improves the specific capacity and the introduced Mn ions extremely enhances the rate capability of monometallic composite. The fabricated CoFe-LDH/MXene (CF-MX10) electrode exhibits a specific capacity of 808 F g −1 at current density of 0.5 A g −1 , much higher than that of CoMn-LDH/MXene (CM-MX10, 562 F g −1 ) and Co(OH) 2 /MXene (C-MX10, 270 F g −1 ). The high areal capacity or rate capacity are attributed to strong synergistic effect between CoM-LDH and MXene, as well as the introduction of metal ions that change the architecture and the electronic or ionic conductivity , which leads to much improved electrical conductivity and electrochemical stability.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
COMPOSITES PART B-ENGINEERING · 2021 · IF 9.078

Leaf vein-inspired engineering of MXene@SrSn(OH)6 nanorods towards super-tough elastomer nanocomposites with outstanding fire safety

Jingyi Lu,Pengfei Jia,Can Liao,Zhoumei Xu,Fukai Chu,Mutian Zhou,Bin Yu,Bibo Wang,Lei Song

The progress of super-robust, high ductile polymeric nanocomposite with superior safety have been caught increasing eyesight for the application in electronic products. In this article, strontium hydroxystannate (SSO) nanorods were in-situ fabricated on the surface of titanium carbide (Ti 3 C 2 T x ) MXene nanosheets (MSSO) for improving fire safety and mechanical property of thermoplastic polyurethane (TPU) to further applications of portable devices. With biomimetic method, the tensile robustness and toughness of TPU-2.0MSSO was enhanced by 46% and 126%, respectively. In addition, the TPU-MSSO nanocomposites performed leaf vein-inspired hierarchical structure during the stretching behavior, resulting 55% enhancement of elongation at break . Furthermore, the fire safety was systematically evaluated, and the peak heat release rate (pHRR) decreased by 37.31%. Above all, hazardous pyrolysis products of TPU during the combustion were also efficiently reduced, especially the generation of carbon oxide (CO) and carbon dioxide (CO 2 ) were decreased by 96.04% and 89.85% when the additive of MSSO was only 2 wt%. As a result, ternary catalytic effect and labyrinth structure improved the safety of TPU in modern electronic products. Hence, this leaf vein-inspired TPU-MSSO nanocomposites not only exhibit superior toughness but also reinforce fire safety while facing thermal runaway, which was significant to destroy the formation of thermal disaster chain and maintain further applications of additional products for portable devices, and package materials for flexible electronics.

CAS / MDL: 7789-24-4 12027-70-2
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2021 · IF 13.273

Microwave-induced segregated composite network with MXene as interfacial solder for ultra-efficient electromagnetic interference shielding and anti-dripping

Wenjie Ma,Wenrui Cai,Wenhua Chen,Pengju Liu,Jianfeng Wang,Zhuoxin Liu

MXenes, a fast-growing family of two-dimensional (2D) materials, can offer an excellent electromagnetic interference (EMI) shielding performance because of ultra-high electrical conductivity, multi-layered structure, and abundant termination groups. In turn, as a result of the favorable interaction with electromagnetic wave, MXene might evoke an intense energy conversion from electromagnetic energy to thermal energy upon exposure to the microwave irradiation. Herein, for the first time, the microwave heating behavior of Ti 3 C 2 T x caused by the strong electromagnetic wave absorption was investigated. Ti 3 C 2 T x nanosheets were flocculation-assembled onto the surface of polypropylene (PP) and used as the “interfacial solder”, inducing a unique selective heating to construct a continuous and compact network in segregated Ti 3 C 2 T x /PP composite under the optimal microwave field. The sintered composite possessed the ultrahigh EMI shielding effectiveness (EMI SE) of 75.12 ~ 78.85 dB over the X-band with an extremely low Ti 3 C 2 T x loading of 1.138 vol%, superior to the vast majority of Ti 3 C 2 T x -based polymer composites. In addition, the compact Ti 3 C 2 T x frameworks also provided an excellent anti-dripping performance for composite even with 0.284 vol% Ti 3 C 2 T x . Therefore, by fully utilizing the intrinsic response of MXene to electromagnetic wave, we developed a novel method for not only process molding but also structural/chemical decoration of MXene-based materials.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
TALANTA · 2021 · IF 6.057

Specific recognition and photothermal release of circulating tumor cells using near-infrared light-responsive 2D MXene nanosheets@hydrogel membranes

Qiannan You,Jiahui Peng,Zhimin Chang,Mingfeng Ge,Qian Mei,Wen-Fei Dong

2D materials with attractive optical properties are promising for individualized cancer immunotherapy. Isolation, capture, and release of circulating tumor cells (CTCs) are of great significance for promoting the process of early diagnosis of cancers. MXene nanosheets incorporated gelatin hydrogel offers the possibility of achieving near-infrared (NIR) light response to initiate the photothermal effect. Herein, the design and preparation of Ti 3 C 2 T x MXene nanosheets-embedded thermoresponsive gelatin hydrogel membrane with NIR light-responsive for the specific capture and release of CTCs were reported. The membrane was fabricated by casting Ti 3 C 2 T x -embedded gelatin onto a substrate and then modified with epithelial-cell adhesion-molecule antibody (anti-EpCAM) for the specific recognition and separation of CTCs from whole blood. The captured cells can be released without damage with dual-mode containing temperature-responsive release (gelatin deconstructed at 37 °C) and photothermal site-release (Ti 3 C 2 T x induced by NIR light). Furthermore, we were able to achieve an average efficient release rate of 89 % of captured cells with stable cell viability of 87 % via the NIR light irradiation . This work may provide the promising potential for retrieval of single cells in clinical diagnosis.

CAS / MDL: 7789-24-4
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
Journal of Physical Chemistry C · 2021 · IF 4.126

Controlling the Defect Density of Perovskite Films by MXene/SnO2 Hybrid Electron Transport Layers for Efficient and Stable Photovoltaics

Huanhuan Zheng,Yijin Wang,Bingqiang Niu,Rui Ge,Yimin Lei,Lihe Yan,Jinhai Si,Peng Zhong,Xiaohua Ma

The defect control of polycrystalline perovskite films is essential for achieving an efficient and stable perovskite solar cell (PSC). However, existing methods of reducing defects suffer from their complex processes, low durability, and limited effects by using molecular materials in terms of passivation mechanisms. Herein, a hybrid film composed of SnO2 nanoparticles/Ti3C2Tx MXene nanoflakes is used as the electron transport layer (ETL) in a planar regular-structure PSC. The results indicate that by changing the Ti3C2Tx/SnO2 ratios (0–2.2 wt %) in ETLs, the film qualities of top perovskite layers are controllable, including the compactness, crystal size, surface roughness, crystallinity, optical absorption, defect density, and so forth. The defect density in perovskite films is substantially reduced from 5.65 × 1015 to 2.25 × 1015 cm–3 using an optimized hybrid ETL (1.4 wt %) compared with the pristine SnO2, while the electrical conductivity of the hybrid ETL is decreased probably due to the geometric factor of the incorporated MXene. As a result, the power conversion efficiency of PSCs is significantly increased from 16.28 to 20.35%, and the environmental stability of the unencapsulated devices is greatly improved. This work provides a facile, robust, and effective way to reduce defects in perovskite films by using emerging MXene nanomaterials and might also be useful to other perovskite-based (opto)electronic devices such as light-emitting diodes and photodetectors.

CAS / MDL: 7789-24-4 196506-01-1
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Nano-Micro Letters · 2021 ·Vol. 13 ·期 1 ·1-11 · IF 16.419

In-Situ Annealed Ti3C2Tx MXene Based All-Solid-State Flexible Zn-Ion Hybrid Micro Supercapacitor Array with Enhanced Stability

Li La,Liu Weijia,Jiang Kai,Chen Di,Qu Fengyu,Shen Guozhen

Flexible Zn-ion hybrid micro-supercapacitors (MSCs) array was fabricated with Ti 3 C 2 T x as the cathode via laser direct writing method, which present ultrastability up to 50,000 cycles after in-situ annealed treatment. A digital timer driven by the obtained single MSC under bending state, together with a flexible LED displayer of the “TiC” logo lighted by the MSC arrays under twisting, crimping and winding conditions demonstrate the great potential application of the MSCs in integrated wearable electronics.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
ACS Nano · 2021 · IF 15.881

Facile Fabrication of Densely Packed Ti3C2 MXene/Nanocellulose Composite Films for Enhancing Electromagnetic Interference Shielding and Electro-/Photothermal Performance

Zehang Zhou,Quancheng Song,Bingxue Huang,Shiyi Feng,Canhui Lu

The development of modern electronics has raised great demand for multifunctional materials to protect electronic instruments against electromagnetic interference (EMI) radiation and ice accretion in cold weather. However, it is still a great challenge to prepare high-performance multifunctional films with excellent flexibilty, mechanical strength, and durability. Here, we propose a layer-by-layer assembly of cellulose nanofiber (CNF)/Ti3C2Tx nanocomposites (TM) on a bacterial cellulose (BC) substrate via repeated spray coating. CNFs are hybridized with Ti3C2Tx nanoflakes to improve the mechanical properties of the functional coating layer and its adhesion with the BC substrate. The densely packed hierarchical structure and strong interfacial interactions endows the TM/BC films with good flexibility, ultrahigh mechanical strength (>250 MPa), and desirable toughness (>20 MJ cm–3). Furthermore, benefiting from the densely packed hierarchical structure, the resultant TM/BC films present outstanding EMI shielding effictiveness of 60 dB and efficient electro-/photothermal heating performance. Silicone encapsulation further imparts high hydrophobicity and exceptional durability against solutions and deformations to the multifunctional films. Impressively, the silicone-coated TM/BC film (Si-TM/BC) exhibits desirable low voltage-driven Joule heating and excellent photoresponsive heating performance, which demonstrates great feasibility for efficient thermal deicing under actual conditions. Therefore, we believe that the Si-TM/BC film with excellent mechanical properties and durability holds great promise for the practical applications of EMI shielding and ice accretion elimination.

CAS / MDL: 7789-24-4 7440-21-3
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
ACS Nano · 2021 · IF 15.881

Ti3C2Tx MXene-Loaded 3D Substrate toward On-Chip Multi-Gas Sensing with Surface-Enhanced Raman Spectroscopy (SERS) Barcode Readout

Kuo Yang,Kai Zhu,Yuanzhe Wang,Ziting Qian,Yizhi Zhang,Zhaoyan Yang,Zhuyuan Wang,Lei Wu,Shenfei Zong,Yiping Cui

Gas sensors lie at the heart of various fields ranging from medical to environmental sciences, and the demand of gas sensors is instantly expanding. However, in the face of complex gas samples, how to maintain high sensitivity while performing multiplex detection still puzzles the researchers. Here, by introducing Ti3C2Tx MXene into a microfluidic gas sensor with a three-dimensional (3D) transferable SERS substrate, a powerful gas sensor having both multiplex detecting ability and high sensitivity is demonstrated. The employ of MXene endows the sensor with a universal high adsorption efficiency for various gases while the generation of in situ gas vortices in the sophisticated nanomicro structure extends the molecule residence time in SERS-active area, both leading to the increased sensitivity. In the proof-of-concept experiment, a limit of detection (LOD) of 10–50 ppb was achieved for three typical volatile organic compounds (VOCs) according to the intrinsic SERS signals of gas molecules. Besides, the well-designed periodic 3D structure solves the general repeatability problem of SERS substrates. In addition, the detailed composition of gas mixture was revealed using classic least-square analysis (CLS) with an average accuracy of 90.6%. Further, a chromatic barcode was developed based on the results of CLS to read out the complex composition of samples visually.

CAS / MDL: 78560-45-9
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
JOURNAL OF SEPARATION SCIENCE · 2021 ·Vol. 44 ·期 18 ·3398-3406 · IF 3.645

Preparation of Ti3C2Tx MXene based solid-phase microextraction coating for sensitive determination of polychlorinated biphenyls in environmental water samples

Tiantian Pang,Xiaohui Chen,Kai Hu,Yongxia Cui,Wenjie Zhao,Huahui Zeng,Zhenqiang Zhang,Shusheng Zhang

In this study, a new Ti 3 C 2 T x -coated fiber was synthesized and utilized as coatings for solid-phase microextraction of seven polychlorinated biphenyls. The as-produced multilayered Ti 3 C 2 T x MXene was characterized by X-ray diffractometer, thermos-gravimetric analysis, scanning electron microscopy, and energy dispersive spectroscopy. It is noteworthy that the Ti 3 C 2 T x showed some attractive features including unique 2D layered structures, large surface area, good hydrophilicity, and rich active recognition sites, endowing it has a high affinity towards the target polychlorinated biphenyls. Subsequently, the affecting parameters on the extraction efficiency of polychlorinated biphenyls were optimized. Under the optimal conditions, a novel method for the analysis of polychlorinated biphenyls in water samples was proposed. The Ti 3 C 2 T x -coated fiber-based solid-phase microextraction method showed good linearity ( r 2 > 0.9928), high enrichment factors (268–442), low limits of detection (0.06–0.15 ng/L), and satisfactory repeatability (RSDs < 7.5%) for the polychlorinated biphenyls. The excellent method recoveries were in the range of 90.0–98.4, 92.0–98.2, and 92.0–98.0% for river water, lake water, and tap water samples, respectively. These results suggested that the proposed Ti 3 C 2 T x -coated fiber-based method represents a promising alternative for the analysis of polychlorinated biphenyls.

CAS / MDL: 68-12-2 110-54-3 67-56-1
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES · 2021 · IF 6.953

Chitosan/hyaluronic acid based hollow microcapsules equipped with MXene/gold nanorods for synergistically enhanced near infrared responsive drug delivery

Zheng Wu,Jun Shi,Pingan Song,Jingguo Li,Shaokui Cao

Ti 3 C 2 MXenes, a novel two-dimensional material, have attracted lots of attention in biomedical filed for its large surface area and excellent near-infrared (NIR) responsiveness. In this paper, a pH/near-infrared (NIR) multi-responsive drug delivery platform consisted of hollow hydroxyapatite (HAP), chitosan (CS)/hyaluronic acid (HA) multilayers, gold nanorods (AuNRs) and MXene had been fabricated via a layer-by-layer (LbL) approach. Chitosan/hyaluronic acid multilayers were deposited on the surface of hollow HAP to retard the burst release of DOX in the initial delivery stage. MXenes and AuNRs equipped on the surface of hybrid matrix greatly enhanced the photothermal conversion efficiency of the microcapsules. Due to the collapse of electrostatic force among chitosan/hyaluronic acid multilayers and the dissolution of HAP under acidic condition, as well as the synergistically enhanced photothermal effect between MXene and AuNRs, HAP/CS/HA/MXene/AuNRs microcapsules exhibited outstanding pH-/NIR-responsive drug delivery properties. The present paper provides an attractive method to prepare chitosan/hyaluronic acid based pH/NIR multi-responsive hybrid microcapsules with excellent photothermal conversion efficiency and biocompatibility, which has great potential in the field of remotely controlled drug delivery.

CAS / MDL: 7789-24-4
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
JOURNAL OF POWER SOURCES · 2021 · IF 9.127

A flexible, heat-resistant and self-healable “rocking-chair” zinc ion microbattery based on MXene-TiS2 (de)intercalation anode

Bingtian Zhao,Siliang Wang,Qitao Yu,Qiang Wang,Min Wang,Tong Ni,Limin Ruan,Wei Zeng

The requirement for rechargeable microbatteries (MBs) continues to increase due to the rapidly development of wearable and integrated electronics. However, the ever-reported mainstream MBs, such as lithium ion MBs, have intrinsic drawbacks of security threats and environmental hazards, and are not suitable as an energy supply component for wearable electronics. Here, a safe and environmentally friendly zinc ion microbattery (ZIMB) based on MXene-TiS 2 (de)intercalation anode, multi-walled carbon nanotubes-vanadium dioxide (B) (MWCNTs-VO 2 (B)) cathode, zinc sulfate-polyacrylamide (ZnSO 4 -PAM) hydrogel electrolyte and self-healable polyurethane (PU) protective shell is exploited. The ZIMB exhibit satisfactory electrochemical performance with a capacity of 40.8 μAh cm -2 , maximum power density of 32.5 μWh cm -2 and maximum energy density of 1.2 mW cm -2 . In addition, the ZIMB also exhibits the excellent flexibility, thermostability and self-healability, i.e. , no significant attenuation in capacity can be observed when the ZIMB is placed on the specific conditions, such as the high bending angle of 150°, high temperature of 100 °C, and multiple damage and repair cycles. This study provides a feasible strategy to develop advanced high reliable and stable micro energy storage devices for wearable and integrated electronics.

CAS / MDL: 872-50-4
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。