MATERIALS & DESIGN
·
2026
·
IF 8.2
Nanxiang Zhang,Haoyun Tan,Mingxin Xu,An Liu
Diabetic wounds are hard to heal and prone to infection. Glabridin (GLD) can promote wound repair but suffers from poor solubility and photostability. This study developed an adhesive eutectogel (GLD/CS/DES) by combining a deep eutectic solvent (DES) formed from sulfobutyl ether-β-cyclodextrin and levulinic acid with chitosan (CS). The DES not only solubilizes GLD but also acts as a dynamic crosslinker, imparting favorable mechanical properties. The gel enabled sustained GLD release for over 10 days and effectively protected GLD from photodegradation. In vitro antibacterial assays demonstrated > 99% efficacy against S. aureus and E. coli by disrupting bacterial membrane integrity. In an infected diabetic wound model, the gel achieved a wound closure rate of 94.3% by day 21. Mechanistic studies revealed that the gel scavenged reactive oxygen species, inhibited the NF-κB pathway, and promoted macrophage polarization from the pro-inflammatory M1 to the reparative M2 phenotype, thereby ameliorating the immune microenvironment, enhancing angiogenesis, and accelerating tissue regeneration.
✓ 已验证
DOI
高影响因子
Journal of Food Measurement and Characterization
·
2026
·
IF 3.6
Yu Jingwen,Ba Wenxiu,Tang Xinru,Mueed Abdul,Zhang Bing,Deng Zeyuan,Li Hongyan
Lycopene predominantly exists as an all-E isomer, but its Z-isomers are more abundant in the human body and have greater bioaccessibility and antioxidant activity than the all-E-isomer. This study aimed to develop an efficient isomerization method for Z-lycopene production and to fabricate Pickering emulsions loaded with high Z-lycopene content (PEZL) to enhance its stability and bioaccessibility, ultimately evaluating its potential effect against benign prostatic hyperplasia (BPH) in a mouse model. First, different methods to induce Z-isomerization of (all-E)-lycopene were investigated. Second, PEZL was fabricated and characterized for encapsulation efficiency, stability (under thermal, ionic, pH, and storage stress), in vitro digestion profile and bioaccessibility. Finally, its efficacy was assessed in a BPH mouse model by measuring the prostatic index (PI) and serum levels of acid phosphatase (ACP), testosterone (T), and dihydrotestosterone (DHT). This study developed an efficient production method for Z-lycopene by microwave heating at 560 W for 5 min with supplementation of garlic and onion at a 1:1 ratio. The total Z-lycopene content increased to approximately 71%, and the isomerization efficiency was higher than that with other isomerization methods. The PEZL prepared by zein-chitosan at the ratio of 1:1 demonstrated high encapsulation efficiency and robust stability. PEZL provided a 1.76-fold increase in the relative bioaccessibility compared to lycopene dissolved in perilla seed oil during simulated digestion in vitro. In the BPH model, PEZL administration significantly reduced the PI and serum levels of ACP, T, and DHT compared to the model group. The PEZL significantly improved the stability and bioaccessibility of Z-lycopene and shows promising preventive effects against BPH in vivo, providing a solid foundation for developing Z-lycopene-based functional foods or nutraceuticals for prostate health.
✓ 已验证
产品关联
DOI
高影响因子
LWT-FOOD SCIENCE AND TECHNOLOGY
·
2026
·
IF 7.1
Haijun Chang,Yu Hu,Yu Huang,Xin Wen,Li Wu
Developed OSAS/CH/SA film for active food packaging. • SA enhanced the mechanical strength and UV-barrier of the film. • Films showed high antioxidant activity and biodegradability. • 0.06 g/hg SA composite film extended pork shelf life to 7 days. The study aimed to develop an active packaging material based on octenyl succinic anhydride modified corn starch (OSAS) and chitosan (CH) incorporated with sinapic acid (SA), and to evaluate its application in pork preservation. The results demonstrated that the esterification between OSA and corn starch was achieved while preserving the crystalline structure, with a substitution degree of 0.02. Subsequently, antioxidant-active films were successfully prepared using CH and OSAS as the matrix materials (CO) with varying concentrations of SA. The physicochemical and mechanical properties of the CO/SA films were systematically characterized. SA endowed the films with superior mechanical strength, UV barrier properties, and biodegradability. The composite films exhibited significant antioxidant activity, effectively reducing lipid oxidation and microbial growth in pork, thereby enhancing meat quality. Compared with conventional polyethylene (PE) packaging, the CO/SA0.06 g/hg composite film exhibited excellent preservation capabilities, extending the shelf life of pork to 7 days. These findings suggest that the CO/SA film presents a promising alternative to traditional plastic packaging materials.
✓ 已验证
DOI
高影响因子
Gels
·
2026
·Vol. 12
·期 5
·361
·
IF 6.4
Yunguang Chen,Yingying Liang,Yaling Deng,Lei Nie
Diabetic wounds are a common and severe complication of diabetes mellitus, characterized by delayed healing due to persistent inflammation, impaired angiogenesis, and cellular dysfunction. Conventional therapeutic approaches remain limited in efficacy. In recent years, exosomes have attracted considerable attention in wound healing and regenerative medicine because of their crucial role in intercellular communication and tissue repair. However, rapid clearance of exosomes in vivo greatly limits their therapeutic efficacy. To address this critical limitation, we engineered a decellularized extracellular matrix (dECM)-based hydrogel system functionalized with exosomes derived from skin-derived precursor cells (SKPs). This biomimetic scaffold was designed to serve as a local exosome-delivery platform at the wound site, with the aim of improving exosome utilization and augmenting their regenerative effects. Comprehensive in vitro characterization demonstrated that the exosome-loaded composite hydrogels exhibited robust pro-angiogenic activity, as evidenced by enhanced endothelial cell proliferation, migration, and tube formation. Moreover, the hydrogels displayed significant antibacterial effects against wound-relevant pathogens and potent reactive oxygen species (ROS)-scavenging capacity, thereby mitigating oxidative damage. Notably, the composite hydrogels also promoted the phenotypic polarization of macrophages toward the pro-regenerative M2 phenotype. In parallel, in vivo studies using a streptozotocin-induced diabetic rat wound model confirmed that treatment with the composite hydrogels significantly accelerated wound closure rates compared to control groups. Histological and immunohistochemical analyses revealed enhanced angiogenesis, as evidenced by increased CD31-positive microvessel density, as well as improved collagen deposition, re-epithelialization, and an attenuated local inflammatory microenvironment characterized by reduced pro-inflammatory cytokine expression and elevated M2 macrophage infiltration. Collectively, the SKPs exosome-loaded dECM based composite hydrogels developed in this study represent a potential therapeutic strategy for the treatment of diabetic wounds.
✓ 已验证
DOI
高影响因子
Journal of Nanotechnology
·
2018
·Vol. 2018
·期 1
·5431290
·
IF 0
Zhangxu Chen,Baorong Wu,Xiaodan Huang,Xianxue Li,Yonglong Lin
In order to biomimetic synthesize hydroxyapatite similar to natural bone. Hydroxyapatite (HAP) is biomimetic synthesized in simulated body fluid (SBF) by addition of imidazole-4,5-dicarboxylic acid grafted chitosan (IDACS). The effect of molar ratio of chitosan (CS) to imidazole-4,5-dicarboxylic acid (IDA) on preparation of HAP was investigated. The structure, size, and crystal phase of the obtained hydroxyapatite were observed by Fourier transform infrared spectroscopy, X-ray powder diffraction, and scanning electron microscopy. The results show that the molar ratio of CS to IDA is 1 : 3, the temperature is 37.0°C, the aging time is 48 h, the synthesized nanorod-like hydroxyapatite with diameter 20–30 nm, and length ranging from 75 to 120 nm presents excellent phase, which disperses well and is similar to the natural bone of HAP. The obtained HAP can be used to remove chromium(VI) by the orthogonal experiments, and the results indicated that the removal rate can reach 95.66% under the optimum conditions. These results suggest that the morphology of the obtained HAP is more affected by the material ratio of chitosan to imidazole-4,5-dicarboxylic acid than its structure, and the obtained HAP can effectively remove Cr(VI), which provides a novel method for biomimetic synthesis of other biomaterials and application in the water purification.
✓ 已验证
DOI
Materials Science & Engineering C-Materials for Biological Applications
·
2018
·
IF 5.08
Hairui Suo,Deming Zhang,Jun Yin,Jin Qian,Zi Liang Wu,Jianzhong Fu
Gelatin and chitosan (CS) are widely used natural biomaterials for tissue engineering scaffolds, but the poor mechanical properties of pure gelatin or CS hydrogels become a big obstacle that limits their use as scaffolds, especially in load-bearing tissues. This study provided a novel mechanism of forming interpenetrating network (IPN) of gelatin methacryloyl (GelMA) and CS hydrogels by covalent bonds and hydrophobic interactions through photocrosslinking and basification, respectively. By characterization of the compressive and tensile moduli, ultimate tensile stress and strain, it was found that semi-IPN and IPN structure can greatly enhance the mechanical properties of GelMA-CS hydrogels compared to the single network CS or GelMA. Moreover, the increase of either GelMA or CS concentration can strengthen the hydrogel network. Then, the swelling, enzymatic degradation, and morphology of GelMA-CS hydrogels were also systematically investigated. The excellent biocompatibility of GelMA-CS hydrogels was demonstrated by large spreading area of bone mesenchymal stem cells on hydrogel surfaces when CS concentration was <2% (w/v). According to this study, the multiple requirements of properties can be fulfilled by carefully selecting the GelMA and CS compositions for IPN hydrogels.
研究领域:
生物材料
·
组织工程
·
高分子科学
·
生物医学工程
✓ 已验证
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2022
·
IF 7.392
Shaobo Ren,Xubing Yang,Liwen Tang,Xueyu Du,Mengting Li,Xueqiong Yin
Recovery of rare earth metal is a global concern for resource-efficient application and high-tech industry development. In this study, a new Y 3+ adsorbent, namely chitosan-based Y 3+ -imprinted hydrogel with reversible thermo-responsibility (CYIT) was synthesized, using Y 3+ as the template ion. The obtained CYIT was comprehensively characterized by means of DSC, FTIR, LRS, TGA, SEM, and XPS. As revealed from the results, CYIT possesses stable reversible thermo-responsibility confirmed by the phase transition temperature ranging from 29.2 °C to 38.4 °C. Its maximum adsorption capacity on Y 3+ is up to 160.0 mg/g, much higher than the corresponding performance of similar hydrogels. More significantly, this type of adsorbent could be effectively regenerated by simply leaching with cold water and the desorption efficiency reached 96.2 % after wash by cold water at 15 °C for 25 min. Besides, the remarkable reusability should also be highlighted, for the adsorption capacity and desorption efficiency remained as 124.8 mg/g and 90.0 %, respectively, after five adsorption–desorption cycles. In the coexistence of other interfering metal ions (including La 3+ , Gd 3+ , Cu 2+ , Al 3+ , and Fe 3+ ), CYIT also exhibited better adsorption selectivity than the corresponding adsorbent without Y 3+ -imprinting.
✓ 已验证
产品关联
DOI
高影响因子
MOLECULES
·
2022
·Vol. 27
·期 18
·5895
·
IF 4.927
Liang Yan,Chaoyan Zhang,Fengna Xi
A facile and highly sensitive determination of prostate-specific antigen (PSA) is of great significance for the early diagnosis, monitoring and prognosis of prostate cancer. In this work, a disposable and label-free electrochemical immunosensing platform was demonstrated based on chitosan–graphene-modified indium tin oxide (ITO) electrode, which enables sensitive amperometric determination of PSA. Chitosan (CS) modified reduced graphene oxide (rGO) nanocomposite (CS–rGO) was easily synthesized by the chemical reduction of graphene oxide (GO) using CS as a dispersant and biofunctionalizing agent. When CS–rGO was modified on the patterned ITO, CS offered high biocompatibility and reactive groups for the immobilization of recognition antibodies and rGO acted as a transduction element and enhancer to improve the electronic conductivity and stability of the CS–rGO composite film. The affinity-based biosensing interface was constructed by covalent immobilization of a specific polyclonal anti-PSA antibody (Ab) on the amino-enriched electrode surface via a facile glutaraldehyde (GA) cross-linking method, which was followed by the use of bovine serum albumin to block the non-specific sites. The immunosensor allowed the detection of PSA in a wide range from 1 to 5 ng mL−1with a low limit of detection of 0.8 pg mL−1. This sensor also exhibited high selectivity, reproducibility, and good storage stability. The application of the prepared immunosensor was successfully validated by measuring PSA in spiked human serum samples.Keywords:amperometric immunosensor;graphene composite;chitosan;disposable electrode;prostate-specific antigen
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2022
·
IF 8.025
Yongchun Zhou,Da Bao,Shengnan Sun,Chen Cheng,Sen Zhang,Minlin Qing,Miao Zhao,Jing Guo
Chitosan grafting coumarin-3-carboxylic acid (CS-g-CCA) fiber with fluorescent function and enhanced tensile strength was successfully prepared by in-situ wet-spinning. FTIR and NMR results demonstrate that CCA is successfully grafted onto the CS molecule chains. As the grafting rate increases from 4.2 to 15.8 %, the spinning solution viscosity increases from 22 to 54 Pa·s. SEM observations show that the CS and CS-g-CCA fiber surfaces and cross-sections exhibit homogeneity and smoothness. Likewise, as the drawing ratio increases from 1.0 to 1.4, 2D WAXS patterns illustrate the molecular chain oriented significantly along the drawing direction. The CS-g-CCA fiber (the grafting rate of 15.8 %) exhibits a maximum breaking strength of 1.06 cn/dtex, increasing by 20 % more than the CS fiber. Meanwhile, it has a peak fluorescence intensity of around 480 nm. In addition, the continuous preparation process simplifies the technological route and improves the preparation efficiency of CS-g-CCA fiber. As-prepared CS-g-CCA fiber with enhanced tensile strength and elevated fluorescence efficiency lays the foundation for potential application in fluorescent probes , anti-counterfeiting, and biomedicine fields.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CERAMICS INTERNATIONAL
·
2022
·
IF 5.532
Taotao Qiang,Boqiang Qiu,Lu Chen,Longfang Ren
In this work, a novel adsorbent for the removal of hexavalent chromium (Cr(VI)) in aqueous solution was successfully prepared by altering the 2D Ti 3 C 2 /chitosan composite with disodium ethylenediaminetetraacetate (EDTA·2Na) agent. The successful surface loading of chitosan on Ti 3 C 2 was demonstrated by various characterization methods, including scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FT-IR). The adsorption of Cr(VI) by Ti 3 C 2 -based composite under various circumstances was evaluated using batch adsorption experiments. The adsorption performance of the optimal sample for Cr(VI) was investigated in detail through different influencing factors, and the adsorption process was analyzed by adsorption kinetics and isotherm model. In addition, XPS analysis of adsorbents before and after adsorption showed that some Cr(VI) was reduced to Cr(III) during the whole process, which was conducive to reducing the biological toxicity of Cr(VI). The mechanism analysis showed that the adsorption was mainly electrostatic physical adsorption, supplemented by chemical reduction adsorption. Finally, through the regeneration cycle experiment, it was found that the adsorption rate of Cr(VI) remained above 80% after six repeated adsorptions, indicating that the composite material had good stability and might have certain practical application value in the treatment of Cr(VI)-containing wastewater.
✓ 已验证
产品关联
DOI
高影响因子
MATERIALS CHEMISTRY AND PHYSICS
·
2022
·
IF 4.778
Lingling Wang,Fei Han,Guoping Zeng,Yin Hu,Wei Chen,Fen Zhang,Weiguo Song
As an efficient corrosion inhibitor in acidic medium, carboxymethyl chitosan (CMC) has a limited application in non-acidic medium, due to large consumption and high cost. In the study, magnetic reduced graphene oxide (MRGO) is first introduced into CMC inhibitors to enhance the corrosion inhibition . By optimizing, the best corrosion inhibition efficiency of compound inhibitor is attained as high as 91.78% for carbon steel Q235 in 3.5 wt% NaCl solution, with the remarkably decreased amount of CMC from 800 mg L −1 to 40 mg L −1 . Our work lays a good foundation for expanding the potential application of CMC and MRGO as non-acidic medium corrosion inhibitor.
✓ 已验证
产品关联
DOI
高影响因子
POLYMER BULLETIN
·
2023
·
IF 3.2
Huang Jiali,Dong Ruirui,Habibul Marhaba,Zhang Yanhui,Guan Ming,Li Guixin
It is of great significance for human health and environmental monitoring to establish an ultrasensitive assay method for Hg 2+ . In this work, a label-free and highly sensitive electrochemiluminescence (ECL) aptasensor was developed for the sensitive and selective detection of Hg 2+ without additional coreactants. Poly (aniline-luminol)/graphene oxide (P(ANi-Lu)/GO) nanocomposites were prepared, and chitosan (CS) was used to modify the surface of the material positively charged. The prepared P(ANi-Lu)/GO/CS was characterized by scanning electron microscopy (TEM), UV–Vis absorption spectra, fluorescence spectra and electrochemical impedance spectroscopy. The P(ANi-Lu)/GO/CS exhibited a stable and excellent electrochemiluminescence (ECL) property. Aptamer was adsorbed on P(ANi-Lu)/GO/CS sensing interface through electrostatic interaction, and Hg 2+ was detected using T-Hg 2+ -T configuration as ECL intensity controller. The results showed that Hg 2+ can be quantitatively determined in the range of 1.0 × 10 −15 ~1.0 × 10 −7 M with a detection limit of 4.8 × 10 −16 M. Graphical abstract
✓ 已验证
产品关联
DOI
高影响因子