文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第3013至3024个,产品总数5,004个

切换升序
4'
IRANIAN POLYMER JOURNAL · 2022 ·Vol. 31 ·期 11 ·1347-1359 · IF 2.485

Silver nanoparticles-coated 2D glass-flakes reinforced polyurea composites with high thermal conductivity, acceptable toughness and thermal stability

Wu Xiaoli,Cao Jianfei,Liang Haotian,Tang Hailong,Liao Yijun,Meng Guolong,Huang Wanxia

An effective 2D thermal-conductive filler was prepared by coating glass flakes with silver (Ag-coated-glass flakes) through the electroless plating method for the first time. The XRD, XPS and SEM results showed that the silver completely covered the glass flake, and the silver volume could be controlled by the silver nitrate concentration. When the Ag-coated glass flakes was introduced to polyaspartic acid resin (PAE) matrix, the measurement results indicated that the thermal conductivity of the Ag-coated glass flakes/PAE composite was gradually enhanced with increasing loading of (Ag-coated glass flakes) as well as the volume of Ag on the surface of glass flake. The high thermal conductivities of 0.61–1.15 Wm −1  K −1 were achieved for 1.41–4.58% (vol) (Ag-coated glass flakes/PAE composites. The improvement was ascribed to its formation of continuous and effective 3D heat transfer channels by Ag-coated-glass flakes in PAE matrix. Furthermore, the introduction of low loading of Ag-coated glass flakes into PAE exhibited an enhancement effect on the impact strength. The impact strengths for 2.16% (vol) Ag-coated glass flakes-2 and Ag-coated glass flakes-4 filled PAE composites were increased by 30.5% and 20.3% as compared with pure PAE resin. Besides, the introduction of Ag-coated glass flakes enables the composites with obvious improvements of the degradation temperature, heat deformation, Vicat softening temperature. Therefore, the results of this study suggested an alternative method to fabricate high thermal conductive PAE-based composites with decent toughness and thermal stability. Graphical abstract

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
APPLIED BIOCHEMISTRY AND BIOTECHNOLOGY · 2022 ·Vol. 195 ·期 1 ·33-50 · IF 3.094

Resource Utilization of Bovine Neck Ligament: Enzymatic Preparation of Elastin Peptide and Its Antioxidant Activity

Sun Qiao,Zhang Xu,Gao Mengchu,Zhang Chunxiao,Peng Biyu

Elastin is considered an excellent resource for obtaining antioxidant peptides due to unique amino acid composition. However, it is hardly soluble in water or in dilute acid or alkali; most of the elastases have low yields for preparing elastin peptides, making it difficult to meet industrial applications. To address above problems, enzymes capable of hydrolyzing elastin into soluble peptides were preferred from typical commercial protease preparations. The optimal enzymatic hydrolysis process conditions for elastin peptides were obtained by response surface optimization design. The molecular weight, amino acid composition, and antioxidant activity of the enzymatic hydrolysis products were determined. The results show that the alkaline protease NUE has a strong hydrolysis effect. The optimized enzymatic hydrolysis conditions are as follows: substrate concentration is 5%, enzyme concentration is 650 U/mL, pH is 10.0, temperature is 60 °C, time is 6 h. The degree of hydrolysis of elastic protein peptides obtained through this method is 14.42%. The distribution of molecular weight is 200–6500 Da, more than 85% of the component molecular amount is greater than 800 Da; the amino acid content related to antioxidant activity has reached 68 mg/100 mg, so it has extremely high free radical clearance. Compared with acid and alkali methods, the anti-oxidation capacity of enzyme-based peptide is better, the reaction conditions are milder, the yield is higher, and by-products and pollutants are fewer. It provides an effective way to industrialized production of elastin peptides with high antioxidant activity and a basis for its widespread application in the food and pharmaceutical industries.

CAS / MDL: 1898-66-4 28752-68-3
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
JOURNAL OF NANOBIOTECHNOLOGY · 2022 ·Vol. 20 ·期 1 ·1-17 · IF 9.429

Artificial neural network for cytocompatibility and antibacterial enhancement induced by femtosecond laser micro/nano structures

Lu Libin,Zhang Jiaru,Guan Kai,Zhou Jin,Yuan Fusong,Guan Yingchun

The failure of orthopedic and dental implants is mainly caused by biomaterial-associated infections and poor osseointegration. Surface modification of biomedical materials plays a significant role in enhancing osseointegration and anti-bacterial infection. In this work, a non-linear relationship between the micro/nano surface structures and the femtosecond laser processing parameters was successfully established based on an artificial neural network. Then a controllable functional surface with silver nanoparticles (AgNPs) to was produced to improve the cytocompatibility and antibacterial properties of biomedical titanium alloy. The surface topography, wettability, and Ag + release were carefully investigated. The effects of these characteristics on antibacterial activity and cytocompatibilty were also evaluated. Results show that the prepared surface is hydrophobic, which can prevent the burst release of Ag + in the initial stage. The prepared surface also shows both good cytocompatibility toward the murine calvarial preosteoblasts MC3T3-E1 cells (derived from Mus musculus (mouse) calvaria) and good antibacterial effects against Gram-negative ( E. coli ) and Gram-positive ( S. aureus ) bacteria, which is caused by the combined effect of appropriate micro/nano-structured feature and reasonable Ag + release rate. We do not only clarify the antibacterial mechanism but also demonstrate the possibility of balancing the antibacterial and osteointegration-promoting properties by micro/nano-structures. The reported method offers an effective strategy for the patterned surface modification of implants. Graphical Abstract

CAS / MDL: 60-00-4
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH · 2022 ·Vol. 29 ·期 60 ·90738-90751 · IF 5.19

Adsorption of 2,4-dichlorophenoxyacetic acid by UiO-66-NH2 obtained in a green way

Zhang Xiaoting,Han Runping

In this study, a zirconium elemental organic framework (UiO-66-NH 2 ) was prepared by a green synthesis method and showed a good adsorption performance for removing 2,4-dichlorophenoxyacetic acid (2,4-D) from water. UiO-66-NH 2 was analyzed by a variety of characterization methods and the adsorption properties of 2,4-D on UiO-66-NH 2 were investigated by static adsorption experiments. The results showed that the adsorption of 2,4-D had a wide pH range (2–10) and good salt tolerance with the adsorption equilibrium time about 2 h. The maximum adsorption capacity from Langmuir was up to 652 mg g −1 at 303 K. The isotherms can be described by Langmuir model and the adsorption kinetics was consistent with pseudo-second-order kinetic model and Elovich model. The regeneration efficiency was still 95% after 5 cycles with 0.01 mol L −1 NaOH as desorption solution. The feasibility of practical application of UiO-66-NH 2 was explored by simulating actual wastewater at different pH. UiO-66-NH 2 is promising to remove 2,4-D from water. Graphical abstract

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
JOURNAL OF MATERIALS SCIENCE · 2022 ·Vol. 57 ·期 25 ·12138-12146 · IF 4.682

Biomimetic strategy to synthesize a strong, tough and elastic cellulose enhanced magnetic hydrogel

Liu Yupeng,Jian Junyu,Xie Yitong,Gao Shishuai,Zhang Daihui,Shi Hao,Xu Yuzhi,Lai Chenhuan,Wang Chunpeng,Chu Fuxiang

Magnetic hydrogels have been widely utilized in the fields of biomedical devices, flexible electronics, and soft robotics. Unfortunately, current strategies to synthesize magnetic hydrogels are difficult to achieve high mechanical properties. Herein, we have presented a biomimetic strategy to synthesize a strong, tough and elastic cellulose enhanced magnetic hydrogel (CEMH). The cellulose skeleton containing magnetic nanoparticles was first generated by self-assembly of cellulose chains as the enhancement filler, while elastic polyacrylamide formed by in situ polymerization functioned as the elastic matrix. The mechanical and physicochemical properties of CEMH, as well as the effect of Fe 3 O 4 and acrylamide concentration on the performance, were systematically investigated. The highest tensile strength and toughness of CEMH could reach 1.1 MPa and 2.9 MJ/m 3 , respectively. Furthermore, CEMH showed a high elastic recovery of 94.5% (10th cycle), accompanies by a certain swelling resistance ability. All these advantages were accomplished mainly owing to the synergetic contribution of biomimetic design and enhanced non-covalent interactions.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CATALYSIS LETTERS · 2022 ·Vol. 153 ·期 4 ·1096-1108 · IF 2.936

Efficient Alcoholysis of Saponins from Dioscorea zingiberensis by Solid Acids Derived from Diethylenetriamine

Tang Lingqian,Fan Mingxuan,Pan Zhiquan,Cheng Qingrong,Feng Lu,Wu Hanjun,Zhou Hong

Low-molecular weight solid acid, [(DETA-(SO 3 H) 2 ], was synthesized and fully characterized by FTIR, XRD, TGA, XPS, 1 H-NMR and elemental analysis. The prepared solid acid exhibited high strong acid density (7.6 mmol H + /g), much higher than most of other solid acids. The solid acid was used for the extraction of diosgenin from the saponins in Dioscorea zingiberensis C. H. Wright. Diosgenin is a very medical intermediate for the synthesis of various kinds of steroidal drugs. To improve the diosgenin yield, the optimal conditions of the extraction reaction were investigated by single-factor experiments. Under the optimized conditions, the diosgenin yield catalyzed by the solid acid was much higher than those obtained by the catalysis of other solid acids or conventional sulfuric acid. Importantly, no waste liquid was discharged in the approach as the reaction medium can be recycled. The alcoholysis approach for the production of diosgenin has a great potential application in the industry. Graphical Abstract A novel low-molecular weight solid acid was synthesized and fully characterized. The solid acid showed excellent catalytic activity for the catalytic alcoholysis of saponins from D. zingiberensis C. H. Wright (DZW), the catalyst can be recycled and the whole extraction process is green and efficient.

CAS / MDL: 512-04-9
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Tungsten · 2022 ·Vol. 5 ·期 1 ·179-188 · IF 0

Effect of surface modification on thermal expansion of Zr2WP2O12/aromatic polyimides based composites

Shi Xin-Wei,Zhang Sen,Zhou Qiang,Li Jing,Zhu Bai-Lin,Xu Liu-Jie,Gao Qi-Long

Surface modification is a fascinating way to improve the compounding effect between inorganic fillers and polymers. In this study, zirconium tungsten phosphate (ZWP) with negative thermal expansion was surface modified by silane coupling agent 3-(Trimethoxysilyl)propyl methacrylate. The effects of surface modification and the modification mechanism were analyzed in detail by X-ray diffractometer, scanning electron microscopy, Fourier transform infrared spectroscopy and thermal mechanical analysis. The surface modification could effectively reduce the thermal expansion properties of the composite. When the added amount of 3-methacryloxypropyl trimethoxysilaneSilane (trade name: KH570) is 0.50 wt%, the thermal expansion coefficient of ZWP/Aromatic polyimide composite decreased by 9.76%. The surface modification also can effectively improve the dielectric performance of aromatic polyimides. The present work provides one new way to improve the thermal expansion behavior of composites.

✓ 已验证 产品关联 DOI
查看原文 查看 PubMed
APPLIED BIOCHEMISTRY AND BIOTECHNOLOGY · 2022 ·Vol. 194 ·期 7 ·3044-3065 · IF 3.094

A Novel Electrochemical Immunosensor Based on COF-LZU1 as Precursor to Form Heteroatom-Doped Carbon Nanosphere for CA19-9 Detection

Qiu Ren,Dai Jianmin,Meng Lingqiang,Gao Hongmin,Wu Mengdie,Qi Feifan,Feng Jing,Pan Hongzhi

Porous carbon sphere materials have a large variety of applications in several fields due to the large surface area, adaptable porosity, and good conductivity they possess. Obtaining a steady carbon sphere using the green synthesis method remains a significant challenge. In this experiment, covalent organic frameworks (COFs) were used as a precursor and Fe 3 O 4 NPs were integrated into the precursor in order to synthesize a porous carbon sphere material using the one-step pyrolysis method. COFs have an ordered porous structure, perpetual porosity, large surface area, and low density and display good environmental tolerance. These properties make them an excellent precursor for synthesizing porous carbon sphere, which maintains good morphology at high temperatures, and it is not involved in the removal of dangerous reagent and small size restrictions during the synthesis process. In addition to the formation of a porous carbon sphere, transition metal carbon material that contains N element can be an active catalyst. The composites exhibit better activity when Fe is doped into carbon materials containing N element than that of other doped transition metals including Mn and Co. In this situation, the integration of Fe 3 O 4 NPs and N element in the COF precursor exposed the active sites of the composites and the two substances synergistically improved the electrocatalytic properties, and the composites were named Fe 3 O 4 @NPCS. The constructed Fe 3 O 4 @NPCS/GCE immunosensor was applied as a means of detecting CA19-9 antigen and presented a wide linear range from 0.00001 to 10 U/mL with a low detection limit of 2.429 μU/mL (S/N = 3). In addition, the prepared immunosensor was utilized for detecting CA19-9 antigen in the real human serum, and the recovery rates were in the range from 95.24% to 106.38%. Therefore, a porous carbon sphere prepared by COFs as a precursor can be applied for the detection of CA19-9 antigen in real samples, which could be an excellent strategy for CA19-9 antigen detection and could potentially promote the development of COF materials in various electrochemical fields.

CAS / MDL: 9048-46-8
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
WOOD SCIENCE AND TECHNOLOGY · 2022 ·Vol. 56 ·期 3 ·691-702 · IF 2.898

Aminosilane-modified wood sponge for efficient CO2 capture

Wang Zhongguo,Zhang Xiong-Fei,Ding Meili,Yao Jianfeng

Wood sponges obtained by structure-retaining delignification of natural wood sheets are promising for CO 2 storage. Herein, lignin in balsa wood is selectively removed through chemical treatment, leading to a highly porous structure. To boost the CO 2 adsorption capacity, amine agents are grafted on the delignified wood via a condensation reaction. The resulting amine-grafted wood sponges exhibit hierarchical porosity and are mechanically resilient. A relatively high CO 2 uptake of 1.22 mmol g −1 (25 °C, 1 bar) is achieved due to the physisorption of hierarchical pores and chemisorption of high amine group loading. Such amine-grafted wood sponges fabricated from top-down strategy hold great potential to serve as renewable CO 2 capture materials.

CAS / MDL: 3069-29-2 7758-19-2
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
POLYMER BULLETIN · 2022 ·Vol. 80 ·期 3 ·2697-2711 · IF 2.843

Magnetic polyvinyl alcohol microspheres with self-regulating temperature hyperthermia and CT/MR imaging for arterial embolization

Yin Peinan,Wei Chengxiong,Jin Xin,Yu Xiaogang,Wu Chengwei,Zhang Wei

Trans-catheter arterial embolization, as a minimally invasive therapy strategy, has become a choice for treating liver cancer. Development of embolic agents integrated with therapy and imagining functions is desired. Herein, magnetic polyvinyl alcohol (PVA) microspheres as embolic agents are prepared by emulsification method. The diameter of the magnetic PVA microspheres ranges from 10 to 110 μm, and the required size can be obtained by sieving. The temperature of magnetic PVA microspheres suspension could stabilize at 49 °C under the applied magnetic field, which indicates the microspheres have self-regulating temperature hyperthermia characteristic due to the application of magnetic nanoparticles with low Curie point. In addition, magnetic PVA microspheres possess obvious contrast effects on CT and T2-weighted imaging due to the existence of magnetic nanoparticles. Cytotoxicity assay indicates the survival rate of cells cultured with leach liquor of 30 mg/mL PVA/MNPs microspheres is 97.4%, which shows the magnetic microspheres have good cell biocompatibility. The developed magnetic microspheres have the potential to realize embolization, self-regulating temperature hyperthermia, and CT/MR imaging simultaneously in interventional therapy.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS · 2022 ·Vol. 33 ·期 13 ·10131-10141 · IF 2.779

Enhanced magnetic properties of FeSiAl soft magnetic composites prepared by utilizing phosphate: PSA as insulating layer

Lu Hao,Dong Yaqiang,Liu Xincai,Liu Zhonghao,Ma Yan,Wu Yue,He Aina,Li Jiawei,Wang Xinmin

The phosphating treatment method has been extensively applied in the field of insulating soft magnetic powders because of its simplicity and ease of operation; however, the specific nanoscale morphology of phosphate coating layers and the interface/connection/interaction with the outer resin are still unclear. In this study, soft magnetic powder cores (SMPCs) with a nanoporous-structured phosphate coating were fabricated, in which the coating has a beneficial adsorption effect on the outer resin and can enhance the bonding force between the organic/inorganic coating. Optimized soft magnetic properties were obtained for the SMPCs with a phosphoric acid content of 0.6 wt%, including a high effective permeability of 61, low core loss of 134.6 mW/cm 3 (measured at 100 mT, 50 kHz), and high DC bias performance of 56% under a superimposed field of 100 Oe due to the favorable interactions between the insulating coating layers. These properties can be used to manufacture micro-magnetic components.

CAS / MDL: 7664-38-2
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Nature Communications · 2022 ·Vol. 13 ·期 1 ·1-13 · IF 17.694

Unraveling the electronegativity-dominated intermediate adsorption on high-entropy alloy electrocatalysts

Hao Jiace,Zhuang Zechao,Cao Kecheng,Gao Guohua,Wang Chan,Lai Feili,Lu Shuanglong,Ma Piming,Dong Weifu,Liu Tianxi,Du Mingliang,Zhu Han

High-entropy alloys have received considerable attention in the field of catalysis due to their exceptional properties. However, few studies hitherto focus on the origin of their outstanding performance and the accurate identification of active centers. Herein, we report a conceptual and experimental approach to overcome the limitations of single-element catalysts by designing a FeCoNiXRu (X: Cu, Cr, and Mn) High-entropy alloys system with various active sites that have different adsorption capacities for multiple intermediates. The electronegativity differences between mixed elements in HEA induce significant charge redistribution and create highly active Co and Ru sites with optimized energy barriers for simultaneously stabilizing OH * and H * intermediates, which greatly enhances the efficiency of water dissociation in alkaline conditions. This work provides an in-depth understanding of the interactions between specific active sites and intermediates, which opens up a fascinating direction for breaking scaling relation issues for multistep reactions.

CAS / MDL: 31175-20-9
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。