Journal of Materials Chemistry A
·
2020
·Vol. 8
·期 33
·17056-17064
·
IF 11.301
Xin-Yu Hu,Pan Xu,Shengwen Deng,Jie Lei,Xiaodong Lin,Qi-Hui Wu,Mingsen Zheng,Quanfeng Dong
Lithium (Li) is a metallic element possessing the most negative electrode potential and the lowest electrochemical equivalent, which make it one of the key materials for the development of the next-generation Li batteries with high specific energy. However, the heterogeneous deposition, volume expansion, solid-electrolyte interphase (SEI) fracture, and high reactivity of metallic Li make its commercialized development difficult. Herein, a novel polyaniline (PANI) decorated three-dimensional (3D) copper mesh (3DCMP) skeleton for a Li metal anode is proposed, which was prepared by in situ polymerizing aniline on the surface of a copper mesh (3DCM). The lithiophilic PANI micro-sheets could induce ordered Li deposition on the mesh and facilitate the formation of a more available SEI film, which could effectively alleviate the formation of Li dendrites and highly promote the utilization of Li during long-term cycling. The symmetrical-cell displayed an excellent Li plating/stripping performance, in which it maintained an overpotential of less than 20 mV at a current density of 2 mA cm−2 over 4000 h. Furthermore, the full-cell coupled with the LiFePO4 cathode exhibited a high capacity retention of 84.8% at 4C after 550 cycles and when coupled with the rGO/S cathode exhibited a capacity retention of 94.4% at 1C after 100 cycles. Hence, it demonstrates a promising potential to be applied in large-scale manufacturing.
研究领域:
材料科学
·
电化学
·
储能技术
·
纳米材料
·
电池化学
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2021
·
IF 13.273
Lu Cheng,Chenhui Ma,Wenqiang Lu,Xin Wang,Huijuan Yue,Dong Zhang,Zhenyu Xing
Selenium cathode, of high volumetric energy density and compatibility with safe/cheap carbonate electrolyte, are plagued by low active material utilization, limited rate capability and fast capacity fading. Therefore, a carbon host, capable of speeding electron transfer, facilitating Li + diffusion and buffering drastic volume breath, is greatly demanded. Herein, a graphitized hierarchical porous carbon is prepared by metallothermic reduction reaction of CO 2 , and employed as cathode host for alkali metal-Se batteries. With high electronic conductivity, ultrahigh specific area (1740 m 2 g −1 ) and abundant porosity (1.76 cm 3 g −1 ), this carbon host after Se infiltrating exhibits an initial capacity of 994 mAh g −1 and a reversible capacity of 538 mAh g −1 at 0.5C in the initial cycle for lithium-selenium batteries. In addition, a reversible capacity of 451 mAh g −1 can still be achieved at a current density of 2C, with a low capacity decay rate of about 0.037% per cycle in subsequent 800 cycles. In further tests, HPC/Se cathode also shows superior rate capabilities and stable cyclability for sodium-selenium batteries and potassium-selenium batteries.
研究领域:
能源材料
·
电化学
·
电池技术
·
纳米多孔材料
·
碳材料
✓ 已验证
DOI
高影响因子
ORGANOMETALLICS
·
2013
·
IF 4.145
Huili Chen,Xiaokai Li,Ruichun Bai,Yanbo Wu,Yingfang Fan,Jianbin Chao
A phosphorescent probe, Ir(ppy)2Cl(DMF) (Ir2), for cysteine (Cys) is reported. The recognition is based on the time-dependent emission of Ir2-Cys. Importantly, this probe can discriminate Cys rapidly from homocysteine (Hcy). Probe Ir2 displays a highly selective 72 nm of luminescent red-shift toward Cys within 30 min with an obvious emissive color change from green to orange. After 30 min, the emission band blue shifts gradually with an emissive change from orange to green. TDDFT combined with CV studies indicates that the different emission profile is ascribed to the different binding modes of Ir2 to Cys with time. The probe can be used to determine Cys in semiaqueous solution.
研究领域:
无机化学
·
分析化学
·
生物无机化学
·
发光传感器
·
分子探针
✓ 已验证
DOI
高影响因子
COMBUSTION AND FLAME
·
2022
·
IF 5.767
Qianjin Lin,Chun Zou,Jianghui Luo,Wenxiang Xia,Wenyu Li,Chao Peng
Ignition delay times (IDTs) for di-isopropyl ketone (DIPK) were measured at pressures of 6 and 10 atm, equivalence ratios ( ϕ ) of 0.5, 1.0, and 2, and over a temperature range of 1100 - 1500 K. In the DIPK sub-model proposed by Barari et al., DIPK⇔IC 3 H 7 +IC 3 H 7 CO (R2) was erroneously written as DIPK⇔IC 3 H 7 + IC 4 H 7 O and the consumption paths of dimethyl ketene (DMK) are missing. A DIPK sub-model was proposed on the basis of Barari model by correcting these errors, reassigning the rate coefficients of the DIPK unimolecular decomposition reactions (R1, R2), H-abstraction reactions by O ˙ H (R3, R4), fuel radical isomerization reaction (R5), and β-scission decomposition reactions (R5-R10) using the analogy method, and adopting the theoretical calculations of the H-abstraction reactions by H ˙ , C ˙ H 3 , and H O ˙ 2 (R11-R16) provided by Allen et al.. The rate coefficients of R1-R10 were globally optimized by the Bayesian optimization algorithm using the experimental IDTs and profiles of DIPK and DMK. The optimized model well predicts not only the IDTs and profiles of DIPK and DMK, but also the laminar flame speeds and the profiles of many intermediates (propyne, propylene , and methyl ketene) and small species (H 2 , CO, CH 4 ) during the pyrolysis of DIPK. The calculation using the method of Chen et al. shows that no optimized reaction violates the collision limit. The sensitivity and rate of production analysis were used to discuss the DIPK unimolecular decompositions, DIPK H-abstraction reactions, DIPK radicals isomerization and β-scission reactions, and the optimization of the DIPK sub-model.
研究领域:
燃烧化学
·
化学动力学
·
能源工程
·
反应机理建模
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 13.2
Kelei Shi,Huiping Chen,Jianwei Li,Yupan Han,Hongling Sun,Hu Liu,Lin Dong,Chuntai Liu,Changyu Shen
Conductive hydrogels with high flexibility, satisfactory electromechanical properties, and conformal adhesion are pivotal elements for application in wearable electronics. However, integrating multi functions of mechanical robustness, high conductivity, adequate interfacial adhesion, environmental stability, and multimodal sensing into one flexible electronic device still encounters numerous challenges. Here, a fully polymeric organohydrogel is designed by incorporating polyethyleneimine (PEI) into acrylamide/ zwitterionic monomer crosslinked network with poly(3,4-ethylene dioxythiophene): poly(styrene sulfonate) (PEDOT: PSS) as the conductive constituent through radical copolymerization in the propanediol /water medium, aiming to achieve an all-in-one wearable response platform for dependable applications. Synergistic inter- /intramolecular hydrogen bonds, electrostatic interactions, and ionic-dipole interactions between PEI chains and anionic PSS endow the organohydrogel with mechanical robustness and powerful adhesion (>175 kPa). The organohydrogel possesses bimodal sensing abilities for strain and temperature, exhibiting high sensitivity of 17.4 within a wide strain range of 0–820% and excellent thermosensation across a temperature range of −30–60 °C, qualifying for precisely detecting complicated human activities. Owing to wide-spectrum light absorption ability of PEDOT: PSS, the organohydrogel exhibits reliable photothermal conversion properties. Meanwhile, it can conformally adhere onto the human skin to accurately collect electrophysiological signals. This work establishes a versatile platform for developing high-performance organohydrogel-based flexible electronics.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 13.2
Qingye Liu,Xiaohui Wang,Wenbo Xu,Xuan Ning,Yu Yang,Peng Li,Yanling Hu,Xiaojun Li,Qingqing Li
The conductive hydrogels have emerged as the promising bioelectronics in various applications. To address the persistent challenge of reconciling extreme mechanical robustness with outstanding electrical properties during the long-term use, we propose a synergistic strategy to develop a strong and highly conductive hydrogel with hierarchical network through sequential Dimethyl sulfoxide (DMSO) crystal-templating, solvent replacement, multi-amine-mediated crystal reorganization and co -polymerization. Taking the merits of the aligned microstructure, adaptive non-covalent interactions, and the re-organized Poly(vinyl alcohol) (PVA) crystalline domains, the resultant hydrogel could effectively dissipate the impact energy, demonstrating excellent tensile strength as high as 4.26 MPa with a satisfactory fracture strain of 206%. Besides, this reliable conductive hydrogel displays a tissue-like self-strengthening behavior upon cyclic mechanical training, where the respective tensile strength and strain could be further increased up to 8.5 MPa and 221%. Notably, the conductive particles could be firmly immobilized into the outer layer of hydrogel via in-situ co -polymerization between the multi-amine molecules (i.e., 2,4,6-Triaminopyrimidine) and aniline monomers. Due to the existence of anisotropic transport channels, the ductile hydrogel possesses high electrical conductivity up to 13 S⸱m −1 , and exhibits consistent sensitivity to external strains. The high-performances make the hydrogel as an efficient electronic device for real-time motion sensing.
✓ 已验证
产品关联
DOI
高影响因子
CHINESE JOURNAL OF CATALYSIS
·
2026
·
IF 17.7
Juxia Xiong,Hao Ma,Yingjun Dong,Benjamin Liu,Xiangji Zhou,Linbo Li,Yuanmiao Sun,Xiaolong Zhang,Hui-Ming Cheng
Bi-based catalysts are known to promote the electrochemical reduction of CO 2 to formic acid (HCOOH) or formate (HCOO − ). However, their implementation presents challenges: the first H + /e − pair transfer to form the key *OCHO intermediate on a Bi surface is a slow, kinetically sluggish endergonic process, resulting in a large overpotential and narrow potential window for high HCOOH/HCOO − selectivity. Altering the localized p -orbital electron states of Bi to change intermediate binding behaviors is difficult. We addressed this problem by using an in-situ polymerization method to obtain a polyaniline-Bi hybrid (PANI-Bi) with Bi surrounded by PANI chains. Combined experimental and computational studies indicate that the polyaniline acted as an “electron pump” that facilitated charge transfer from the PANI backbone to the Bi surface and changed the p -orbital electrons of the Bi active sites. This lowered the energy barrier for the adsorption of intermediates and facilitated *OCHO formation. Consequently, a significant increase in formate production was observed, achieving a single-pass carbon efficiency exceeding 48.7% at 800 mA cm −2 . This organic functionalization strategy, aimed at modifying the electronic structure of heterogeneous catalysts, offers a promising approach for achieving highly selective electroreduction of CO 2 at a high current density.
✓ 已验证
产品关联
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2026
·
IF 5.6
Honglei Wang,Chuhan Sun,Xingui Zhou,Jinshan Yu
Tantalum carbide (TaC) matrix composites are widely used in aerospace thermal protection systems due to their high melting point and excellent thermal shock resistance. In the precursor infiltration and pyrolysis (PIP) process, the TaC precursor plays a critical role in the fabrication of the composites. However, conventional tantalum alkoxide precursors often suffer from insufficient crosslinking sites and lack of molecular-level mixing between the Ta and C sources. To address these issues, this study synthesized an unsaturated TaC precursor using tantalum pentachloride (TaCl 5 ) and 3-buten-1-ol as reactants, with allyl novolac resin (AN) introduced as the carbon source. The C=C bonds in the structure acted as active crosslinking centers during copolymerization, leading to the formation of a densely cross-linked network in the PTC-Butene precursor. Using PTC-Butene solution as the precursor and 30 vol% carbon fiber felt as the reinforcement, C f /TaC composites were successfully fabricated by PIP process. The composites were subjected to oxyacetylene ablation tests for 10, 60 and 120 s, and the ablation mechanisms were systematically investigated. Results show that during ablation, a molten Ta 2 O 5 layer formed on the surface, which acted as a barrier against oxygen diffusion. However, this oxide layer was continuously eroded by the high-speed gas flow. Carbon fibers helped alleviate thermal stress and suppress matrix cracking, yet inherent pores within the composites and channels left after fiber oxidation provided pathways for oxygen infiltration.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF APPLIED CRYSTALLOGRAPHY
·
2023
·Vol. 56
·期 5
·1569-1573
·
IF 6.1
Wang Z.,Xu J.,Zhao Z.,Zhang Z.,Tong Y.
A novel type of 4,4′,5,5′-tetranitro-1H,1′H-(2,2′-biimidazole)-1,1′-diamine (DATNBI)/TNT energetic cocrystal (cocrystal-1) was prepared by the solvent evaporation method. The molar ratio of the cocrystal is 1:2 and the crystal density is 1.784 g cm−3 at 23°C. It belongs to the triclinic system with space group P1. The thermal stability, mechanical sensitivity and detonation performance of cocrystal-1 were studied. Compared with DATNBI, the mechanical sensitivity (H50 and FS, friction sensitivity) and thermal stability (Td, detonation temperature) of cocrystal-1 were significantly improved (H50, FS and Td of DATNBI and cocrystal-1 are, respectively, 27.8 cm, 160 N, 240°C and 65.6 cm, >360 N, 253°C). Combining these results with other characterizations, it was found that cocrystal-1 exhibited a polymorphic transformation, phase separation and melting of the two single components in succession. The ability to control the properties and understand the structural stability of this explosive cocrystal is of great value.
✓ 已验证
DOI
高影响因子
Advances in Mechanical Engineering
·
2019
·
IF 1.024
Shijian Luo,Wenjie Li,Mingya Wei,Yichao Huang
China has the most elderly people in the world, and home-based care is the best choice. Existing Chinese home smart health monitoring products and service systems for the elderly are relatively lacking. Numerous clinical and epidemiological studies show that grip force has the potential to be a predictor of short-term and long-term mortality and morbidity. Better collection and investigation of elderly grip force can help achieve real-time monitoring of their physical condition and healthy aging. This research studied an intelligent grip force collector and service system for the elderly. First, shortcomings of existing grip force collectors were examined; user needs, product functions, and system requirements were summarized by researching 60 target users. Then, hand model data of the elderly were collected and exploratory adjustments were carried out for the hardware product design. Next, six target users were invited to test the interactive prototype; finally, the interface design of the service system was optimized and completed. The study incorporates consultation with rehabilitation doctors from a hospital in Hangzhou. The final product design makes combined software and hardware innovations, guiding self-health monitoring and management of the elderly, strengthening prevention of health risks, and improving user experience compared to that with existing products.
✓ 已验证
DOI
高影响因子
JOURNAL OF MEDICINAL CHEMISTRY
·
2026
·
IF 7.3
Fei Han,Suntao Shi,Liangying Mi,Ruipeng Shen,Jingyi Liu,Zhengyu Ma,Mengzhao Zhang,Tao Ma,Zhongtian Bai,Baoxin Zhang
Nitroreductase (NTR), a hypoxia-upregulated enzyme, is a promising biomarker for solid tumors, driving demand for effective biosensors. Cyanine dyes are prominent fluorophores widely used in fluorescence imaging, tumor phototheranostics, and image-guided surgery. Guided by atomic engineering through strategic heteroatom substitution (C, O, and S), we designed four NTR-activated probes. Optical characterization identified HCy-NS-4 as the lead candidate, exhibiting near-infrared emission (λem = 712 nm) and over 18-fold fluorescence enhancement upon activation. The probe enabled precise imaging of hypoxic NTR and distinguished malignant from nonmalignant cells, while in vivo and in vitro studies supported the use of the probe in intraoperative tumor navigation. Additionally, using HCy-NS-4 as a screening tool, we identified luteolin as a potential NTR modulator that exhibited concentration-dependent suppression of NTR-associated fluorescence activation and significant antitumor activity in vivo. Collectively, this continuum─from atomic-scale molecular design to novel NTR inhibitor discovery─provides an innovative model for drug screening.
✓ 已验证
DOI
PubMed
高影响因子
Toxics
·
2026
·Vol. 14
·期 6
·506
·
IF 4.9
Junyue Zheng,Xiangguang Chen,Jiazhen Jiang,Fengchang Wu
Glyphosate (Gly) is currently the most commonly used broad-spectrum herbicide in the world. The extensive residues of Gly and its major metabolite aminomethylphosphonic acid (AMPA) in food and the environment make it inevitable for humans to consume them. Although Gly has been shown to disturb the homeostasis of gut microbiome by inhibiting the shikimic acid pathway of microorganisms, the potential health effects [such as the occurrence of antibiotic resistance genes (ARGs)] remain unclear. Furthermore, as antibiotics that also act on the intestinal microbiota, their extensive residues inevitably lead to co-exposure with Gly. For these reasons, this study used zebrafish as experimental organisms to explore the effects of Gly/AMPA and oxytetracycline (OTC) exposure alone or in combination on ARGs in the intestine. Our results indicate that Gly exposure, rather than AMPA exposure, led to a 1.67-fold increase in the relative abundance of ARGs in the zebrafish intestine. Combined exposure to Gly and OTC led to a 2.30-fold increase in the relative abundance of ARGs in the zebrafish intestine, indicating a synergistic effect, whereas the additive effect of AMPA and OTC was negligible. In conclusion, the health risk of antibiotic resistance caused by Gly through the gut microbiota is a neglected hot topic. Further studies are needed to clarify Gly-induced functional drug resistance and to assess the human relevance of these findings using more appropriate model organisms.
✓ 已验证
DOI
PubMed
高影响因子