Sustainable Chemistry and Pharmacy
·
2024
·
IF 5.5
Yuheng Xie,Jiangxin Li,Cong Li,Xin Wang,Juan Zhang
In recent years, research on the conversion of CO 2 into fine chemical products has emerged as a prominent and dynamic area of study. In this study, four ligands were synthesized using salicylaldehyde , o-phenylenediamine, ethylenediamine , hexanediamine, and 2,6-diaminopyridine as precursors. Subsequently, these ligands were reacted with cobalt nitrate, zinc chloride , and aluminum chloride to synthesize 12 Schiff base metal complexes , which were employed as catalysts for the synthesis of propylene carbonate from CO 2 and epichlorohydrin . The findings reveal that the SF-L/Co catalyst demonstrated superior performance, potentially attributed to the robust chelating capability of Co, leading to the provision of more acidic metal centers. Characterization of SF-L/Co was conducted utilizing scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FT-IR), energy-dispersive X-ray spectroscopy (EDS), and X-ray diffraction (XRD) techniques. Process conditions were optimized, resulting in the achievement of a 100% yield and selectivity of propylene carbonate under optimal reaction conditions, without the generation of any by-products. Furthermore, the catalyst exhibited remarkable reusability, demonstrating consistent catalytic activity over five successive cycles without a substantial decrease in performance.
✓ 已验证
产品关联
DOI
高影响因子
POLYMER
·
2025
·
IF 4.5
Bo Wen,Gaopeng Wang,Renze Xu,Chenglong Weng,Jintao Yang
With the growing global emphasis on environmental protection, supercritical CO 2 foaming technology for biodegradable materials such as polylactic acid (PLA), poly(butylene adipate-co-terephthalate) (PBAT), poly (butylene succinate) (PBS) and their blends has emerged as a research and application hotspot. However, the low melt strength and poor compatibility of these polymers often lead to low nucleation efficiency, cell wall rupture and coalescence, exhibiting inferior foaming performance. In this work, aiming to enhance the foamability of PLA and PLA/PBAT blends, a fluorinated chain extender, F-CE (GMA-co-DFHA-co-MMA), was designed and synthesized. Through the reactive melt blending, F-CE effectively enhanced the melt strength of PLA and interfacial adhesion between PLA and PBAT, leading to a significant improvement in foaming performance. Additionally, the fluorine groups in DFHA demonstrated high affinity for CO 2 , providing additional heterogeneous nucleation sites for bubble formation, thereby increasing both foam expansion ratio and cell density. Notably, the F-CE/PLA foam exhibited a cell diameter of ∼13.8 μm with an exceptionally high expansion ratio of ∼35. As a contrast, pristine PLA foam shows an expansion ratio of ∼30, but with large cell diameter (∼118 μm). Although PLA foam containing CE without fluorine (CE/PLA foam) exhibits small cells with an average cell diameter of ∼13.6 μm, the expansion ratio is low (∼23). In addition, F-CE also exhibits superior performance in improving the foamability of PLA/PBAT blends. This work presents a chain extender specifically engineered for foaming applications, which functions as a highly efficient foaming additive to holistically enhance the foaming performance of polymers.
✓ 已验证
产品关联
DOI
高影响因子
Nano-Micro Letters
·
2025
·Vol. 17
·期 1
·1-16
·
IF 36.3
Peng Ting,Wang Yiqing,Dong Chung-Li,Nga Ta Thi Thuy,Wu Binglan,Wang Yiduo,Guan Qingqing,Zhang Wenjie,Shen Shaohua
BiOCl atomic layers (BOCNSs-i) were prepared by exfoliating hydrothermally synthesized BiOCl (BOCNSs) via ultrasonication in isopropanol for efficient photocatalytic CO 2 overall splitting to CO and O 2 .
The obtained BOCNSs-i photocatalyst exhibits a distinctly improved photocatalytic performance to stoichiometrically produce CO and O 2 at the ratio of 2:1, with the CO evolution rate reaching 134.8 µmol g −1 h −1 under simulated solar light (1.7 suns) and reaching 13.3 mmol g −1 h −1 under concentrated solar irradiation (34 suns).
With the thickness of BiOCl photocatalyst reducing to atomic layers, the charge carrier transfer and separation were enhanced by shortened transfer distance and the increased built-in electric field intensity, and electrons enriched Bi sites were exposed for activating CO 2 molecules.
✓ 已验证
DOI
PubMed
高影响因子
ADVANCED FUNCTIONAL MATERIALS
·
2025
·
IF 19
Junqing Chen,Xinxin Yang,Le Yu,Yongheng Wang,Jingjing Li,Yuying Wu,Luhe Qi,Lu Chen,Jing Huang,Ziyang Lu,Chang Chen,Enlai Gao,He Liu,Chaoji Chen
In the plastic industry, replacing petrochemical-based polymers with naturally occurring bio-polymers (represented by cellulose), is a very promising route to circumvent the plastic pollution issue. However, the implementation of this is severely hindered by the high water affinity and flammability of such materials. Here, a verstile non-isocyanate polyurethane (NIPU) formulation composed of a CO 2 -based cyclic carbonate compound, a reactive amino-functionalized silicone oil concurrently capable of providing water-resistance and a flame-retardant moiety is designed. Compositing it with conventional cellulose paper (cellulose macrofiber network, CMN), a nonflammable and mechanically strong cellulose macrofiber network-based biocomposite (CMN-Biocomposite) can be easily obtained via transcarbamoylation reaction. Other than hydrogen bonding interaction among various components of CMN-Biocomposite, the intermolecular bond exchange mechanism between the dynamic carbamate moiety and hydroxyl of the cellulose is also experimentally and computationally determined as the governing factor for the high tensile strength of up to 57.9 MPa. Additionally, benefiting from the dynamic nature of the carbamate bond, the CMN-Biocomposite's processability and biodegradability outperform most petrochemical-based plastics. The superiority of the proposed synthetic strategy in achieving the long-term carbon neutrality goal by CO 2 fixation and excellent performance for plastic applications make the CMN-Biocomposite a very promising alternative to conventional plastics.
✓ 已验证
产品关联
DOI
高影响因子
MOLECULES
·
2021
·Vol. 26
·期 17
·5293
·
IF 4.412
Like Ouyang,Jianfei Xiao,Housheng Jiang,Shaojun Yuan
CO2adsorption in porous carbon materials has attracted great interests for alleviating emission of post-combustion CO2. In this work, a novel nitrogen-doped porous carbon material was fabricated by carbonizing the precursor of melamine-resorcinol-formaldehyde resin/graphene oxide (MR/GO) composites with KOH as the activation agent. Detailed characterization results revealed that the fabricated MR(0.25)/GO-500 porous carbon (0.25 represented the amount of GO added in wt.% and 500 denoted activation temperature in °C) had well-defined pore size distribution, high specific surface area (1264 m2·g−1) and high nitrogen content (6.92 wt.%), which was mainly composed of the pyridinic-N and pyrrolic-N species. Batch adsorption experiments demonstrated that the fabricated MR(0.25)/GO-500 porous carbon delivered excellent CO2adsorption ability of 5.21 mmol·g−1at 298.15 K and 500 kPa, and such porous carbon also exhibited fast adsorption kinetics, high selectivity of CO2/N2and good recyclability. With the inherent microstructure features of high surface area and abundant N adsorption sites species, the MR/GO-derived porous carbon materials offer a potentially promising adsorbent for practical CO2capture.Keywords:nitrogen-doped;porous carbon;melamine resin;graphene oxide;CO2adsorption
✓ 已验证
DOI
PubMed
高影响因子
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
·
2021
·
IF 3.764
Xiaonan Zhao,Wei Liu,Xiufeng Liu,Baoquan Zhang
Mixed matrix membranes (MMMs) are challenged by the poor compatibility between fillers and a polymer matrix that leads to the weakened performance for gas separation. The surface modification of fillers with aminosilane should be an effective approach to improve their compatibility within the polymer matrix. 3-(2-Aminoethylamino)propyl-dimethoxymethylsilane (APDS) was used as a silane coupling agent for modification of sheet-like silicoaluminophosphate-34 (SAPO-34) crystal grains, and novel MMMs were fabricated by incorporating APDS-modified SAPO-34 crystal grains into a Pebax MH 1657 polymer. Based on characterization using scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, and mechanical tests, the incorporation of an APDS-modified SAPO-34 into Pebax matrix led to much enhanced interfacial adhesion within the MMM. In addition, the effect of the filler content in the MMM on the separation performance of a CO2/CH4 gas mixture and pure gases (CO2 and CH4) was investigated. Compared with available Pebax-based MMMs in the literature, the prepared MMM containing 8 wt % APDS-modified SAPO-34 exhibited the satisfactory CO2 permeability of ca. 137 Barrer and the highest selectivity of 34.7 for the CO2/CH4 gas mixture. It was believed that the excellent separation performance and good stability of the prepared MMM in this study should be due to the good interfacial compatibility of APDS–SAPO-34 fillers together with their strong affinity for CO2 within the MMM.
✓ 已验证
DOI
高影响因子
ChemSusChem
·
2020
·Vol. 13
·期 24
·6594-6601
·
IF 7.962
Biyu Chen,Jiajie Xu,Jiantao Zou,Defei Liu,Yue Situ,Hong Huang
Graphical A hollow victory : The mass transport and reaction process of the CO 2 reduction reaction on copper-tin alloy hollow fibers are investigated. The reason for suppressing hydrogen evolution reaction is revealed by comparing the influence of different gas injection ways. The high performance of formate production on Cu−Sn 45% alloy hollow fiber is attributed to the favorable crystal phase and the unique structure. Electroreduction carbon dioxide into formate has been regarded as a hopeful measure to relieve global warming. Copper-based hollow fibers demonstrated good performances on converting carbon dioxide in previous researches. Herein Cu−Sn alloy hollow fibers were synthesized in an innovative way, combining the structure advantages of hollow fiber and high selectivity towards formate on η′ bronze. Tests under different gas injection conditions were conducted to analyze the contribution of the hollow fiber structure on suppression of hydrogen evolution and promotion on kinetics. Strikingly, Cu−Sn 45 % hollow fiber, the optimal catalyst in this work, achieved a highest faradaic efficiency towards formate of 90.96 % at a lower potential of −0.75 V vs. RHE than most non-noble catalysts, and the FE of H 2 was below 4 %.
✓ 已验证
DOI
PubMed
高影响因子
ChemCatChem
·
2022
·Vol. 14
·期 13
·e202200253
·
IF 5.497
Mingsheng Luo,Tong Qin,Qinglong Liu,Zhi Yang,Fengli Wang,Hong Li
Graphical Promoting : A series of Fe-modified CeO 2 catalysts with nanoparticle, nanorod, nanocube and nano-octahedron morphologies were synthesized by the hydrothermal method. The Fe-modified CeO 2 nanorod catalysts exhibit a remarkably promoting effect on the formation of DMC from CO 2 and methanol. A series of Fe-modified CeO 2 catalysts with nanoparticle, nanorod, nanocube and nano-octahedron morphologies were synthesized and applied for direct synthesis of dimethyl carbonate (DMC) from CO 2 and methanol. The Fe-modification shows a remarkably promoting effect on the formation of DMC over Fe-modified CeO 2 nanorod. The DMC yield was improved from 0.202 to 2.568 mmol DMC per g cat by 2 %Fe-modification of CeO 2 nanorod. A synergistic effect among the moderate acid-basic sites, specific surface area and surface composition resulted from Fe-modification was proposed to be crucial to obtaining the high reactivity of DMC formation.
✓ 已验证
DOI
高影响因子
JOURNAL OF THE CHINESE CHEMICAL SOCIETY
·
2020
·Vol. 67
·期 10
·1818-1826
·
IF 1.554
Yang Hu,Longchao Du,Cun Li,Jiale Shen,Weiju Zhu,Chenxi Shao
Carbon dioxide (CO 2 ) is an easily available renewable carbon source that can be used as a comonomer in the catalytic ring-opening polymerization of epoxides to form aliphatic polycarbonates. Herein, a series of new Salen-Co(III) bifunctional catalysts were synthesized for the first time, and they were studied to catalyze the copolymerization of CO 2 and propylene oxide (PO)/cyclohexene oxide (CHO). At the same time, the effects of reaction conditions (electronic effect, temperature, time) on catalytic activity and selectivity were investigated. The results show that the Salen-Co(III) complexes with electron-withdrawing groups have higher selectivity and activity for propylene carbonate (PPC)/cyclohexylene carbonate (PCHC). At the same time, the Salen-Co(III) complexes can better catalyze the copolymerization of CHO and CO 2 than that of PO and CO 2 . The catalytic efficiency of the four complexes increased with increasing temperature, and the best reaction condition is 80°C, 30 min and 2 MPa of CO 2 .
✓ 已验证
DOI
高影响因子
ADVANCED MATERIALS
·
2014
·Vol. 26
·期 41
·7027-7031
·
IF 15.409
Li-Li Tan,Haiwei Li,Yanchun Tao,Sean Xiao-An Zhang,Bo Wang,Ying-Wei Yang
Graphical Low-density, solid-state, porous supramolecular organic frameworks are constructed using pillarenes. The frameworks have a honeycomb-like structure, permanent porosity, high thermal stability, and selective and reversible sorption properties toward CO 2 . The exceptionally selective CO 2 -sorption properties (375/1, 339/1) of one framework over N 2 and CH 4 indicate potential applications in CO 2 -capture for post-combustion power plants and natural gas sweetening.
✓ 已验证
DOI
PubMed
高影响因子
ChemCatChem
·
2020
·Vol. 12
·期 19
·4825-4830
·
IF 4.853
Xiao Zhang,Kai-Hong Chen,Zhi-Hua Zhou,Liang-Nian He
Graphical Heterogeneous silver catalysis : Well-defined reduced graphene oxide supported Ag nanoparticles are developed for CO 2 conversion. This catalyst is efficient and reusable for various CO 2 utilization processes. Xiao Zhang, Kai-Hong Chen, Zhi-Hua Zhou, Liang-Nian He* Reduced Graphene Oxide Supported Ag Nanoparticles: An Efficient Catalyst for CO 2 Conversion at Ambient Conditions A highly efficient carboxylative cyclization of propargylic alcohols with CO 2 under atmospheric pressure catalyzed by silver (0) nanoparticles decorated reduced graphene oxide (Ag-rGO) is reported. Ag-rGO was fully characterized by scanning electron microscope spectra (SEM), transmission electron microscopy (TEM), Fourier transform infrared (FT-IR) spectra, Raman spectra and X-ray photoelectron spectroscopy (XPS). Notably, Ag-rGO can be also applied to the construction of other value-added chemicals (β-oxopropylcarbamates and 2-oxazolidinones) from CO 2 at ambient conditions. In addition, Ag-rGO is stable and reusable, which shows the potential for the practical application for CO 2 capture and utilization (CCU).
✓ 已验证
DOI
高影响因子
FUEL
·
2021
·
IF 6.609
Jinsong Shi,Hongmin Cui,Jianguo Xu,Nanfu Yan,Chao Zhang,Shengyong You
Heteroatom doped carbons have attracted great attentions as CO 2 adsorbents. Herein, we presented a novel and facile strategy for the synthesis of nitrogen and sulfur co-doped carbons (NSCDCs) with chemical blowing method. Chitosan was used as the carbon and nitrogen source, and hydroquinonesulfonic acid potassium salt (HAPS) was used as the sulfur source and blowing agent. NSCDC with hierarchically porous structure was obtained after one-step carbonization of chitosan and HAPS mixture. The carbon exhibited surface area up to 1645 m 2 /g. HAPS promoted the formation of mesopores and macropores in the carbon. The nitrogen and sulfur contents were 2.54–2.62 and 1.63–6.70 at.%, respectively. NSCDC was also successfully synthesized by replacing chitosan with glucosamine hydrochloride derived hydrochar. The CO 2 adsorption performances of NSCDCs were studied with pressure up to 20 bar. At 25 °C, the best CO 2 uptakes at 1 bar and 20 bar were 2.4 and 12.9 mmol/g, respectively. At 1 bar, the carbon’s microporous structure was the most important factor; at 20 bar, the uptake was mainly decided by the total surface area and the pore volume of the carbon.
✓ 已验证
DOI
高影响因子