INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2023
·
IF 8.2
Yao Wang,Liang Yang,Xiao Zhou,Ye Wang,Yijia Liang,Binshao Luo,Yuhao Dai,Zhouling Wei,Shili Li,Rong He,Wei Ding
The exploration of biopolymer-based materials to avoid hazardous chemicals in agriculture has gained enormous importance for sustainable crop protection. Due to its good biocompatibility and water solubility, carboxymethyl chitosan (CMCS) has been widely applied as a pesticide carrier biomaterial. However, the mechanism by which carboxymethyl chitosan-grafted natural product nanoparticles induce tobacco systemic resistance against bacterial wilt remains largely unknown. In this study, water-soluble CMCS-grafted daphnetin (DA) nanoparticles ( [email protected] ) were successfully synthesized, characterized, and assessed for the first time. The grafting rate of DA in CMCS was 10.05 %, and the water solubility was increased. In addition, [email protected] significantly increased the activities of CAT, PPO and SOD defense enzymes, activated the expression of PR1 and NPR1 , and suppressed the expression of JAZ3 . [email protected] could induce immune responses against R. solanacearum in tobacco, including increases in defense enzymes and overexpression of pathogenesis-related (PR) proteins. The application of [email protected] effectively suppressed the development of tobacco bacterial wilt in pot experiments, and the control efficiency was as high as 74.23 %, 67.80 %, 61.67 % at 8, 10, and 12 days after inoculation. Additionally, [email protected] has excellent biosafety. Therefore, this study highlighted the application of [email protected] in manipulating tobacco to generate defense responses against R. solanacearum , which can be attributed to systemic resistance.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2022
·
IF 16.744
Yanbing Sun,Jianfa Chen,Yixiao Kang,Haoyan Zhang,Yulin Ge,Nan Yuan,Yubo Xing,Wei Ma,Zhen Yang,Liping Zou,Liang Lu
An environmentally friendly and cost-effective adsorbent for removing U(VI) from radioactive wastewater is of significant importance for protecting the environment. In this work, we successfully prepared an ultralight carbon aerogel material (CUCA/MPCs) derived from chitosan and MOFs, and synthesized an adsorbent (CUCA/MPCs-PO 4 ) with a high chelation ability to U(VI) through phosphorylation modification. Various characterization techniques were used to characterize the microscopic morphology and crystallographic structure of the adsorbents. During the batch experiments, it was determined that the optimum pH for the adsorbents for U(VI) was 6.5. According to the linear Langmuir isotherm model and pseudo-second-order kinetic model, U(VI) adsorption on the adsorbent is a monolayer chemisorption reaction. The fitted maximum adsorption capacities of CUCA-PO 4 , CUCA/1MPCs-PO 4 , and CUCA/2MPCs-PO 4 for U(VI) were 357.1 mg/g, 526.3 mg/g, and 592.0 mg/g, respectively. Furthermore, the three adsorbents showed good recyclability, maintaining 79.0 %, 77.4 %, and 82.2 % of the initial adsorption capacity after eight cycles, respectively. The results of actual U(VI) waste adsorption experiments showed that CUCA/2MPCs-PO 4 achieved 92.2 % removal of U(VI), showing good potential for practical applications. Finally, the possible adsorption mechanism between U(VI) and adsorbent was discussed in the context of experimental and characterization results. Overall, this study provides a valuable research idea for the treatment of radioactive wastewater containing U(VI).
✓ 已验证
产品关联
DOI
高影响因子
PROGRESS IN ORGANIC COATINGS
·
2022
·
IF 6.206
Mengyuan Cai,Yuting Duan,Tianchang Shi,Jiaqi Su,Kang Chen,Dongwen Ma,Fujun Wang,Jin Qin,Shuangying Wei,Zhenhua Gao
Different modifiers are often added to coatings to impart a variety of special functions to the coating materials. Due to the interactions between their different properties, this can result in a decline in system stability and complex formulations, with the properties offsetting each other and the emergence of new film disadvantages. Modifiers characterized by multiple advantageous properties can be used to address these problems. In this study, O -carboxymethyl chitosan was used as the cross-linking and antibacterial agent for room-temperature self-crosslinked polyacrylate coatings, resulting in coatings with excellent mechanical properties and antibacterial characteristics, which were then successfully applied to wood coatings. The results revealed that with an increase in O -carboxymethyl chitosan content from 0 wt% to 10 wt%, the cross-linking density of the coating increased from 281.41 to 690.11 mol/m 3 , the tensile strength increased from 9.82 to 20.17 MPa, the elastic modulus increased from 51.05 to 343.83 MPa, the fracture work increased from 28.86 to 33.03 MJ/m 3 , the pencil hardness of the coating increased from 3 to 4H, and the width of the Staphylococcus aureus bacteriostatic ring increased from 1.02 to 11.12 mm. The waterborne polyacrylate coatings with excellent mechanical properties and antibacterial properties prepared using O -carboxymethyl chitosan as the cross-linking and antibacterial agent could potentially be used in various fields for the fabrication of materials used in the medicinal industry, wood coatings, and leather coatings.
✓ 已验证
DOI
高影响因子
POLYMER BULLETIN
·
2023
·Vol. 80
·期 12
·13319-13341
·
IF 3.2
Zhang Qunli,Zhai Weili,Cui Linlin,Liu Yupeng,Xie Wenjing,Yu Qimeng,Luo Hao
Polylactic acid (PLA)/starch acetate (SA) base film was prepared by scraping film method with PLA as the base film material, modified SA as the filling phase and polyethylene glycol (PEG) as plasticizer. Chitosan (CS)/tea polyphenol (TP) antibacterial agent was coated on the surface of PLA/SA base film by coating method. The morphology and structure of the composite film were characterized by FTIR, XRD, SEM and thermogravimetric analysis, and the mechanical, optical and antibacterial properties were tested and analyzed. The results showed that CS/TP compound antibacterial agent was well combined with PLA/SA base film. Compared with the PLA/SA base film, when the content of TP (based on the mass of PLA/SA base film, the same below) was 0.4%, the tensile strength of the composite film increased by 29.33%, had good mechanical strength (24.96 ± 0.65 MPa), and the elongation at break increased by 29.34%; There was no obvious change in transparency, the light transmittance decreased by 0.86%; At the same time, the antibacterial composite film had good antibacterial effect on Escherichia coli , Staphylococcus aureus and Bacillus subtilis . PLA/SA/CS/TP antibacterial composite film could be used in food packaging, especially those designed to protect food from light and microbial decay.
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2023
·
IF 8.2
Mengxia Duan,Jishuai Sun,Shan Yu,Zijian Zhi,Jie Pang,Chunhua Wu
Nisin, a natural substance from Lactococcus lactis, displays a promising antibacterial ability against the gram-positive bacteria. However, it is susceptible to the external environment, i.e. temperature, pH, and food composition. In this study, a dual stabilization method, coaxial electrospinning, was applied to protect nisin in food packaging materials and the effect of nisin concentration on the properties of the nanofibers was investigated. The core-shell nanofibers with pullulan as a core layer and carboxymethyl chitosan (CMCS)/polyethylene oxide (PEO) as shell layer were prepared, and then the prepared CMCS-nisin nanogels (CNNGs) using a self-assembly method were loaded into the core layer of the nanofibers as antibacterial agents. The result revealed that the smooth surface can be observed on the nanofibers by microstructure characterization. The CNNGs-loaded nanofibers exhibited enhanced thermal stability and mechanical strength, as well as excellent antibacterial activity. Importantly, the as-formed nanofibers were applied to preserve bass fish and found that the shelf life of bass fish packed by CNNGSs with nisin at a concentration of 8 mg/mL was effectively extended from 9 days to 15 days. Taken together, the CNNGs can be well stabilized with the core-shell nanofibers, thus exerting significantly improved antimicrobial stability and bioactivity. This special structure exerts a great potential for application as food packaging materials to preserve aquatic products.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
MATERIALS CHEMISTRY AND PHYSICS
·
2022
·
IF 4.778
Jiao He,Congwei Li,Xinjian Cheng
Three chitosan-BODIPY probes were prepared in this work. The water solubility of original chitosan has been improved. Water soluble fluorescent probes were obtained. They also exhibited good sensing ability to Hg 2+ /Hg + ions. Firstly, through the amidation reaction, arginine, cysteine, and tryptophan were grafted respectively onto chitosan chains. And then chitosan-BODIPY probes were produced by means of Schiff base formation reaction. By this way, the high structural regularity of chitosan polymer chains was changed with introducing amino acids and fluorescent groups. It also endowed fluorescence sensing ability. They could recognize Hg 2+ /Hg + ions with the interaction of C N groups. It could selectively recognize Hg 2+ /Hg + in aqueous solution, the detection limits reached 0.747μM/0.783 μM. Moreover, by the introduction of hydrophilic groups, the contact angle of modified chitosan film was improved as well. It realized performance transformation from the hydrophobic to hydrophilic. The viscoelasticity , thermal, rheological properties and fluorescence properties of the hydrogels were investigated. C N groups not only acted as a binding site to coordinate with heavy metals, but also could enhance the water solubility of the fluorescent chitosan.
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2023
·
IF 8.2
Lumin Yang,Xiaoduo Zhao,Yunsong Kong,Renjie Li,Tao Li,Rui Wang,Zhengfeng Ma,Yong-min Liang,Shuanhong Ma,Feng Zhou
The typical symptoms of arthritis are inflammation and lubrication deficiency in joints, which increase wear of articular cartilage along with pain of patients. In the present study, one kind of novel macromolecular/microsphere-based injectable hydrogels (CMC-ODex NPs) with dual functionalities of drug release and lubrication, was fabricated via dynamic Schiff base crosslinking network between carboxymethyl chitosan (CMC) and oxidation dextran nanoparticles (ODex NPs). The CMC-ODex NPs hydrogels exhibited typical viscosity-thinning phenomenon at wide range of shear rates and obvious gel-sol transition feature at specific strain. As a result, CMC-ODex NPs hydrogels presented low friction coefficient at the sliding interface of bovine articular cartilages, resulting from the boundary lubrication of hydrogel and the rolling friction effect of ODex NPs. Furthermore, the anti-inflammatory drug (dexamethasone, DXM) encapsulated in ODex NPs exhibited sustainable drug release behavior during the dynamic shearing process, which making CMC-ODex NPs hydrogels possessed good and stable anti-inflammatory effect. CMC-ODex NPs hydrogels was prepared without utilizing any toxic agents, thus demonstrated excellent cytocompatibility. Our experimental results reveal the CMC-ODex NPs hydrogels is promising to be used as functional lubricant for inhibiting the development of arthritis.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2022
·
IF 8.025
Yongchun Zhou,Da Bao,Shengnan Sun,Chen Cheng,Sen Zhang,Minlin Qing,Miao Zhao,Jing Guo
Chitosan grafting coumarin-3-carboxylic acid (CS-g-CCA) fiber with fluorescent function and enhanced tensile strength was successfully prepared by in-situ wet-spinning. FTIR and NMR results demonstrate that CCA is successfully grafted onto the CS molecule chains. As the grafting rate increases from 4.2 to 15.8 %, the spinning solution viscosity increases from 22 to 54 Pa·s. SEM observations show that the CS and CS-g-CCA fiber surfaces and cross-sections exhibit homogeneity and smoothness. Likewise, as the drawing ratio increases from 1.0 to 1.4, 2D WAXS patterns illustrate the molecular chain oriented significantly along the drawing direction. The CS-g-CCA fiber (the grafting rate of 15.8 %) exhibits a maximum breaking strength of 1.06 cn/dtex, increasing by 20 % more than the CS fiber. Meanwhile, it has a peak fluorescence intensity of around 480 nm. In addition, the continuous preparation process simplifies the technological route and improves the preparation efficiency of CS-g-CCA fiber. As-prepared CS-g-CCA fiber with enhanced tensile strength and elevated fluorescence efficiency lays the foundation for potential application in fluorescent probes , anti-counterfeiting, and biomedicine fields.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Agricultural Science & Technology
·
2022
·
IF 0
Xin Xu,Jinhang Wang,Huihui Wu,Xuedan Cui,Daibing Hou,Jun Cui,Rui Lu,Aijun Lin
Biofortification is an effective way to increase micronutrient levels in food crops. This study investigated selenium enrichment as a biofortification strategy in soybean sprouts. Chitosan oligosaccharide selenium nanoparticles (COS-Se NPs) were synthesized and used in soybean sprout culture to study their effects on the sprouts. The results showed that the enrichment factor value (EF) was higher when the concentration was 2.36–9.43 mg·L–1 compared with other concentrations, and the enrichment factor (EF) reached a maximum value of 0.9782 at a COS-Se NP concentration of 4.72 mg·L–1. Translocation factors (TFradicle-hypocotyl and TFhypocotyl-cotyledon) reached maximum values of 0.7866 and 0.9723 at 25.15 mg·L–1 and 15.09 mg·L–1, respectively, suggesting the relationship between enrichment of nanoselenium and concentration was not proportional. Most of the organic selenium was present mainly in the protein fraction, and albumin and glutelin were the main protein-bound seleniums. The contents of protein and biomacromolecule selenium reached higher values at a COS-Se NP concentration of 2.36–9.43 mg·L–1. Furthermore, the COS-Se NPs at 2.36–9.43 mg·L–1 concentration significantly affected the nutrient parameters in soybean sprouts. Different concentrations of COS-Se NPs were observed to have different effects on the mineral element content of the bean sprouts. In vitro digestion and dialysis experiments showed that the bioavailability of K, Mg, P, and Se was at a high level, while that of Fe and Ca was at a low level in soybean sprouts. Overall, no significant impact on the bioaccessibility of most elements was observed during the enrichment process compared to the control group. This work shows that the selenium enrichment strategy can be a potential soybean sprout production method and help solve the problem of nutritional deficiencies with selenium and reduce malnutrition.
✓ 已验证
产品关联
DOI
POLYMER BULLETIN
·
2023
·
IF 3.2
Huang Jiali,Dong Ruirui,Habibul Marhaba,Zhang Yanhui,Guan Ming,Li Guixin
It is of great significance for human health and environmental monitoring to establish an ultrasensitive assay method for Hg 2+ . In this work, a label-free and highly sensitive electrochemiluminescence (ECL) aptasensor was developed for the sensitive and selective detection of Hg 2+ without additional coreactants. Poly (aniline-luminol)/graphene oxide (P(ANi-Lu)/GO) nanocomposites were prepared, and chitosan (CS) was used to modify the surface of the material positively charged. The prepared P(ANi-Lu)/GO/CS was characterized by scanning electron microscopy (TEM), UV–Vis absorption spectra, fluorescence spectra and electrochemical impedance spectroscopy. The P(ANi-Lu)/GO/CS exhibited a stable and excellent electrochemiluminescence (ECL) property. Aptamer was adsorbed on P(ANi-Lu)/GO/CS sensing interface through electrostatic interaction, and Hg 2+ was detected using T-Hg 2+ -T configuration as ECL intensity controller. The results showed that Hg 2+ can be quantitatively determined in the range of 1.0 × 10 −15 ~1.0 × 10 −7 M with a detection limit of 4.8 × 10 −16 M. Graphical abstract
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2023
·
IF 8.2
Zhengyin Liang,Jun Gao,Zheng-Zhi Yin,Junyao Li,Wenrong Cai,Yong Kong
A sequential delivery system based on MoS 2 nanoflower (MoS 2 NF) doped chitosan (CS)/oxidized dextran (OD) hydrogels is developed for the treatment of colon cancer. 5-Fluorouracil (5-FU) is combined with polyethylenimine (PEI) decorated MoS 2 NF via electrostatic attraction and hydrogen bonding, and the obtained 5-FU/PEI/MoS 2 is encapsulated by 1-tetradecanol (TD), a commonly used phase transition material. The resultant TD/5-FU/PEI/MoS 2 (TFPM) is then co-encapsulated with methotrexate (MTX) in the CS/OD hydrogels generated via Schiff base reaction and electrostatic attraction. Because the electrostatic attraction between CS and OD is pH-sensitive, MTX and TD/5-FU/PEI/MoS 2 can be easily released from the hydrogels at pH 7.4. MoS 2 is an outstanding photothermal agent, and the generated hyperthermia under near infrared (NIR) irradiation can lead to the melting of TD and the consequent release of 5-FU encapsulated. More importantly, the generated hyperthermia under NIR irradiation can realize the chemo-photothermal synergistic tumor therapy. Finally, the practicability of the developed sequential delivery system is demonstrated by cytotoxicity test .
✓ 已验证
产品关联
DOI
PubMed
高影响因子
PROGRESS IN ORGANIC COATINGS
·
2023
·
IF 6.6
Qais Ali Al-Maqtari,Talal Abdulrazzak Ali Alkawry,Kabirou Odjo,Adel Ali Saeed Al-Gheethi,Mohamed Ghamry,Amer Ali Mahdi,Waleed Al-Ansi,Weirong Yao
This study aimed to improve the shelf life of fresh tofu (FT) by applying chitosan (CH) and/or gelatin (GEL) films loaded with two concentrations of microcapsules containing Pulicaria jaubertii extract (MPE). The effect of packaging on the shelf life of FT was evaluated based on physicochemical, microbiological, and textural properties and bioactive compounds during storage for 4 days at 25 °C. In comparison with the films without MPE, the films containing MPE were more effective at extending the shelf life of FT, and those with 2 % MPE concentration achieved optimum results. The FT packaged by CH:GEL film containing 2 % MPE had a positive effect on the studied properties of FT during the storage period, with optimum values in weight loss (47.96 %), moisture content (23.09 %), pH (5.2), acidity (0.049 g lactic acid/100 g FT), hardness (1.74 N), chewiness (1.14), and cohesiveness (0.87 N) after 4 days of storage, whereas the FT packaged by CH film containing 2 % MPE showed less change in free amino acid combinations and had the lowest count of coliform (2.69 log/g FT), E. coli (1.77 log/g FT), Staphylococcus spp. (1.98 log/g FT), and total fungi (4.95 log/g FT) after 4 days of storage. The FT packaged with GEL film containing 2 % MPE showed the highest total phenolic content (2.39 mg gallic acid equivalent/g FT) and the highest scavenging values of DPPH (139.52 ± 3.45 μg ascorbic acid/g FT) and ABTS + (228.71 ± 1.11 μg Trolox equivalents/g FT) on day 4. However, CH and/or GEL films with MPE led to the formation of high-quality films that can effectively prolong the shelf life of FT.
✓ 已验证
产品关联
DOI
高影响因子