ACS Catalysis
·
2022
·
IF 13.7
Liu Lin,Youxuan Ni,Long Shang,Haoxiang Sun,Qiu Zhang,Wei Zhang,Zhenhua Yan,Qing Zhao,Jun Chen
Regulating the atomic arrangement and electron redistribution is beneficial for tuning catalytic oxygen reduction reaction (ORR) performance and deciphering the intrinsic mechanism. Herein, we modulate the charge density around Co centers by designing and synthesizing three Co coordination polymer catalysts, including Co-DABDT (DABDT = 2,5-diaminobenzene-1,4-dithiol, Co–N2S2), Co-BTT (BTT = 1,2,4,5-tetramercaptobenzene, Co–S4), and Co-BTA (BTA = 1,2,4,5-benzenetetramine, Co–N4), to explore the structure–activity relationship between the coordination environment and ORR performance. Because of the high electronegativity of S compared to N atoms, the charge density of Co increases in the order of Co-BTA → Co-DABDT → Co-BTT. Experimentally, Co-DABDT@CNTs with Co–N2S2 delivers a remarkable half-wave potential of 0.85 ± 0.002 V, outperforming Co–N4 and Co–S4 and even Pt/C (0.84 ± 0.003 V). Zinc–air batteries using Co-DABDT@CNTs as the air cathode catalyst also demonstrate excellent power density and stability. The systematic characterization and theoretical simulation reveal that the charge redistribution on Co and S sites of Co–N2S2 would both effectively optimize and stabilize the key intermediate (OOH*) with the assistance of hydrogen bonding interactions between intermediates and active S atoms (*OO–H···S). Interpreting the mechanism of ORR in the coordination sphere provides a feasible way to improve catalytic activity at an atomic level.
✓ 已验证
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2019
·
IF 6.361
Jun-Shuai Zhang,Wei-De Zhang
Developing earth-abundant H 2 -production heterogeneous photocatalysts with robust activity and stability has attracted great interests. Herein, a low-cost photocatalyst was prepared by binding nickel complex covalently from primary amines of chitosan (NiL) onto photosensitive carbon nitride nanosheets (CN) through electrostatic interaction. Introduction of NiL results in more efficient utilization of solar energy, photogenerated electrons’ direct transfer and lower overpotential for water reduction. The optimized NiL3-CN photocatalyst shows the highest H 2 evolution rate of 346 μmol g −1 h −1 under visible light irradiation and exhibits high stability during test. This work presents great potentials for sustainable conversion of solar energy, and sheds positive light on the development of heterogeneous photocatalysts via anchoring H 2 -evolving molecule catalysts confined by inexpensive macromolecules onto a semiconductor photosensitizer through a facile and valid method.
✓ 已验证
DOI
高影响因子
Green Energy & Environment
·
2019
·
IF 0
Zhiwei Lu,Xiaochao Xu,Yujuan Chen,Xiaohui Wang,Li Sun,Kelei Zhuo
Supercapacitors with unique performance have been widely utilized in many fields. Herein, we report a nitrogen and sulfur co-doped graphene aerogel (N/S-GA-2) prepared using a low toxic precursor for high-performance supercapacitors. The as-obtained material possesses a hierarchically porous structure and a large number of electrochemical active sites. At a current density of 1 A g −1 , the specific capacitance of the N/S-GA-2 for supercapacitors with the ionic liquid as the electrolyte is 169.4 F g −1 , and the corresponding energy density is 84.5 Wh kg −1 . At a power density of 8.9 kW kg −1 , the energy density can reach up to 75.7 Wh kg −1 , showing that the N/S-GA-2 has an excellent electrochemical performance. Consequently, the N/S-GA-2 can be used as a promising candidate of electrode materials for supercapacitors with high power density and high energy density.
✓ 已验证
DOI
JOURNAL OF ALLOYS AND COMPOUNDS
·
2024
·
IF 5.8
Liwen He,Zongmin Li,Yuan He,Xinjie Tao,Bizhou Lin,Jun Chen,Qiao Huang,Dongya Sun
The study of electrochromic materials has far-reaching significance for the regulation of light and heat as well as the reduction of energy consumption. In this study, rGO-Co-NiO composite films were prepared by combining graphene oxide , which has excellent conductivity and stability, with Co-NiO films. The particle size, band gap, conductivity and response time of the electrochromic films were improved by precisely adjusting the component modulation amount of graphene oxide. The results show that with the incorporation of GO it is easy to form oxygen vacancies , which is conducive to ionic conduction and diffusion, in which the film with a GO doping concentration of 4 % has excellent performances in terms of response time and coloring efficiency, and the response time is reduced from 10.2 to 5.8 seconds, and it still possesses 57.25 % of the light modulation amplitude after 600 cycles, of which the attenuation rate is only 2 % for the period from 100 to 600 cycles, The coloring efficiency after 100 cycles is 48.21 cm 2 /C. In summary, the investigated rGO-Co-NiO composite films have a broad potential for future application in electrochromic devices .
✓ 已验证
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2024
·
IF 9.4
Wenkai Zhang,Yi Jin,Jiayu Wang,Muge Gu,Yue Wang,Xiangqi Zhang,Yihui Zhang,Wei Yu,Yao Liu,Wei-En Yuan,Jing Su
Targeted elimination of damaged or overexpressed proteins within the tumor serves a pivotal role in regulating cellular function and restraining tumor cell growth. Researchers have been striving to identify safer and more effective methods for protein removal. Here, we propose the synergistic employment of a small molecule degrading agent (PROTAC) and siRNA to attain enhanced protein clearance efficiency and tumor therapeutic effects. Co-delivery liposomes were prepared to facilitate the efficient encapsulation of PROTAC and siRNA. Specifically, the cationic liposome significantly improved the solubility of the insoluble PROTAC (DT2216). The cationic polymer (F-PEI) achieved efficient encapsulation of the nucleic acid drug, thereby promoting endocytosis and enhancing the therapeutic impact of the drug. Both in vivo and in vitro experiments demonstrated remarkable degradation of target proteins and inhibition of tumor cells by the co-delivery system. In conclusion, the co-delivery liposomes furnished a nano-delivery system proficient in effectively encapsulating both hydrophilic and hydrophobic drugs, thereby presenting a novel strategy for targeted combination therapy in treating tumors.
✓ 已验证
DOI
高影响因子
JOURNAL OF POROUS MATERIALS
·
2024
·Vol. 31
·期 3
·1005-1014
·
IF 2.5
Han Song,Wang Yanqing,Xu Yanru,Wu Jinlong
Bulk polytetrafluoroethylene (PTFE) foam is a great potential oil–water separation material, owing to the high hydrophobicity and lipophilicity property. However, the technique of fabricating PTFE foam with low cost, controllable porosity and high mechanical strength remains an urgent requirement due to its high chemical inertness induced limitation. A kind of bulk PTFE foam material is prepared by cold pressing co-sintering method, employing sodium chloride (NaCl) as pore forming agent. SEM measurements reveal that the size and distribution of pore structure are mainly determined by the particle size and content of NaCl, because the migration and diffusion behaviors of PTFE particles suffer from more inhibition induced by increased NaCl particles during sintering. The PTFE foam with uniformly distributed pore structures can be obtained from composite mixed with 70 wt% NaCl and 30 wt% PTFE, with a low thermal conductivity as low as 0.069 W/(m K). With the decrease of PTFE content in raw composite, the density and mechanical properties of PTFE foam gradually declines. However, the tensile strength remains as low as 0.2 MPa, with an elongation rate of 21%, which guarantees the required mechanical strength avoiding being broken when use as a bulk oil absorption material. Remarkably, the PTFE foam shows a strong hydrophobicity, with a mean water contact angle of 137°, and with a mean surface roughness of 4.41 μm. It exhibits separation efficiency larger than 99% in 30 cycles, with separation flux larger than 4000 L/m 2 /h within 15 cycles, indicating excellent recyclability and stability. The PTFE foam sample also shows desirable continuous separation performance for oil/water mixture. The proposed bulk PTFE foam with low manufacturing cost and stable chemical and mechanical properties will provide data and theoretical support for the material applied in oil/water separation and thermal-protective coating.
✓ 已验证
DOI
高影响因子
Journal of Coatings Technology and Research
·
2024
·Vol. 21
·期 3
·879-892
·
IF 2.3
Kuang Guankun,Liu Yan,Qin Ying,Lu Tianhao,Xin Binjie
Acrylic acid is commonly used to modify anionic waterborne polyurethanes, and little research has been done on the modification of cationic waterborne polyurethanes. In this study, the effect of acrylic acid addition at different levels on the performance of cationic waterborne polyurethanes was investigated. The experimental results showed that the stability, and chemical resistance of cationic waterborne polyurethane coatings were improved with the addition of acrylic acid, which has the advantages of better chemical resistance, high stability and low price, and the hardness of the coating gradually increased and the adhesion decreased with the increase of acrylic acid content, therefore, the acrylic acid content of 21% was the most suitable. In addition, the effect of amino acids as neutralizing agents on the performance of cationic waterborne polyurethane coatings was also explored. The addition of amino acids helped the cationic waterborne polyurethane to form a reticular crosslinked structure, and the experimental results showed that the mechanical properties of the cationic waterborne polyurethane coatings were greatly improved. Compared with the commonly used acids (hydrochloric acid and acetic acid), amino acids have the advantage of being environmentally friendly and non-toxic, which is more conducive to the industrial production and application of cationic waterborne polyurethane coatings.
✓ 已验证
DOI
高影响因子
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
·
2024
·
IF 5.8
Yu Sun,Juan Liu,Tulai Sun,Zilong Yu,Ziyang Zheng,Mengru Ge,Lihong Bai
In this study, multiple rare earth elements were introduced to modify the multiferroic properties of BiFeO 3 . The effects of co-substitution on the structural evolution and properties were thoroughly investigated. With increasing substitution content, the ceramics underwent a symmetry transition from R 3 c to Pna 2 1 and finally to Pbnm . Co-substitution significantly enhanced the ferroelectric properties, with the highest remanent polarization of 33.14 μC/cm² observed at x = 0.10. Due to the symmetry evolution, ferromagnetism was released from the cycloidal spin structure, and the hysteresis loop gradually saturated, with the highest remanent magnetization ( M r ) of 0.25 emu/g observed at x = 0.16. The concurrent improvement in ferroelectricity and ferromagnetism resulted in substantial magnetoelectric coupling performance, with α ME = 3.50 mV/(cm·Oe). Moreover, direct current poling significantly induced the reverse transition from R 3 c to Pna 2 1 , indicating the potential for electrically controlled magnetism. This study provides a new perspective for modifying the magnetoelectric properties of BiFeO 3 .
✓ 已验证
DOI
高影响因子
JOURNAL OF THE AMERICAN CERAMIC SOCIETY
·
2024
·Vol. 107
·期 12
·8191-8205
·
IF 3.5
Haozhang Liang,Xiangtao Lin,Nanshan Ma,Longqing He,Juxia Tong,Zhiwei Luo,Lingying Ye,Anxian Lu
The Er 3+ /Yb 3+ co-doped tellurite glasses and glass-ceramics (GCs) containing the Gd 2 Te 6 O 15 phase were successfully fabricated via the conventional melting-quenching technique followed by a crystallization regime. The Er 3+ /Yb 3+ co-doped tellurite glasses generated intense up-conversion green (524 and 546 nm) and red (658 nm) emissions when stimulated by a 980 nm laser. The up-conversion green emission intensity increased by 68 and 46 times with the increase of the Yb 3+ /Er 3+ ratio, and the optimal Yb 3+ /Er 3+ ratio was found to be 8:1. The surface crystallization process of the Gd 2 Te 6 O 15 GCs was confirmed through analysis of crystallization kinetics and microscopic morphology. The up-conversion luminescence and lifetime of Er 3+ ions were enhanced by the precipitation of low-phonon-energy Gd 2 Te 6 O 15 crystals. The GC sample crystallized at 480°C for 4 h showed the highest luminescence intensity. The optical thermometry properties of Er 3+ ions at thermally coupled energy levels ( 2 H 11/2 / 4 S 3/2 → 4 I 15/2 ) were explored. The Gd 2 Te 6 O 15 GCs co-doped with 0.25 mol% Er 2 O 3 and 2.0 mol% Yb 2 O 3 exhibited an excellent temperature relative sensitivity ( S r ) of 1.22% K −1 at 293 K and a great repeatability of 98.07%. These results suggest that the Er 3+ /Yb 3+ co-doped Gd 2 Te 6 O 15 GCs show promise for optical thermometry.
✓ 已验证
DOI
高影响因子
Desalination and Water Treatment
·
2024
·
IF 1
Linli Tan,Na Han,Longfei Zhang,Zhenyu Cui,Wei Li,Xingxiang Zhang,Jun Cai
ABSTRACT In this study, a melt processable poly(acrylonitrile-co-methyl acrylate)(P(AN-MA)) copolymer was used as membrane matrix, caprolactam (CPL) and glyceryl triacetate (GTA) were used as an eco-friendly mixed diluent. P(AN-MA) membranes with inter-connected sponge structure and porous surface were successfully fabricated via thermally induced phase separation (TIPS). The optimum ratio of CPL/GTA in the mixed diluent was 1:1 wt.%. Even though the concentration of P(AN-MA) was up to 25 wt.%, the surface of membrane still exhibited microporous structure. When the concentration of P(AN-MA) was 15 wt.%, the membrane formed in 20 °C air bath showed the highest water flux of 6802 L/m 2 h. With the increasing of copolymer content or cooling rate, the pore size decreased. In addition, all of the P(AN-MA) membranes exhibited a rejection to carbon ink more than 90 wt.%. The average pore size of the membranes was less than 270.5 nm, and the tensile strength was more than 2.8 MPa. It is anticipated that the facile and green technology TIPS will bring the P(AN-MA) membrane a step closer for practical applications, including clean-up of oil spills, waste water treatment, fuel purification, and separation of commercially relevant emulsions.
✓ 已验证
DOI
高影响因子
Chemical Engineering and Processing-Process Intensification
·
2024
·
IF 3.8
Zifei Yan,Grace Dai Zhen Lee,Jian Deng,Guangsheng Luo
The synthesis of terminal epoxides, which are vital components in pharmaceuticals and resins, often involves dehydrochlorination of β-chlorohydrins. Although intrinsic kinetics indicate that the dehydrochlorination reaction in the presence of sodium hydroxide could be very rapid, the practical implementation could always be hindered by long reaction time and low conversion rate. Extended contact between the product and the alkaline solution can lead to hydrolysis of the epoxy group, thus necessitating the process intensification to realize higher production efficiency and selectivity. Here, by characterizing thermodynamic equilibrium data and in-situ recording of the reaction that proceeded in a constant interphase reactor, the heterogeneous dehydrochlorination is demonstrated to occur primarily in the organic phase, and the overall reaction rate depends on the equilibrium concentration of sodium alkoxides. This finding, which is fundamentally different from the traditional view that chlorohydrin is first dissolved in the aqueous phase and then reacts with NaOH, leads us to use inert alcohols to assist in the extraction of NaOH. Based on this method, the reaction time can be reduced over 80 % both in batch and continuous reactors. Besides, the method is demonstrated to be effective in the dehydrochlorination of five different long-chain β-chlorohydrins.
✓ 已验证
DOI
高影响因子
Frontiers in Energy Research
·
2022
·
IF 3.858
Ye Xiaodong,Jiang Yangyang,Chen Xi,Guo Benshuai,Mao Songbai,Guo Yafei,Zhao Chuanwen
Electrochemical CO2 reduction to CO using copper-based catalysts has been recognized a promising approach to realizing anthropologic carbon cycle. However, copper-based catalysts face the challenges of low reduction activity and poor selectivity in CO2 reduction reaction. Tuning particle size and oxygen vacancy represents an efficient strategy for boosting their activity and selectivity. Herein, we reported the preparation of nanostructured CuO catalysts for selective electrochemical CO2 reduction to CO. Several templates were employed in the template-assisted hydrothermal process to regulate the particle size and oxygen vacancy. Structure-property-activity relationships of the CuO nanostructures depend on the template effect. CuO-PVP and CuO-SDS synthesized using polyvinylpyrrolidone (PVP) and sodium dodecyl sulfate (SDS) as templates exhibited smaller particles sizes and higher concentrations of oxygen vacancy defects. Under the applied potential of −0.93 V vs. RHE, the desired CuO-PVP and CuO-SDS catalysts exhibited good CO2 reduction activity with high electrochemical surface area normalized partial current density of 2.21 and 1.37 mA/cm2 for CO production and outstanding CO selectivity with high faradaic efficiencies of 48.2 and 50.5%. Density functional theory (DFT) calculations indicated that oxygen vacancies in the CuO nanostructures not only promoted CO2 adsorption and activation but facilitated CO desorption from the catalyst surface, and therefore boosted the activity and CO selectivity in CO2 reduction. The results have deepened the understanding of the structure-property-activity relationships of CuO catalysts, and these will provide guidance for designing highly efficient and robust catalysts for electrochemical CO2 reduction to CO.
✓ 已验证
DOI
高影响因子