文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第3025至3036个,产品总数5,784个

切换升序
Chitosan
ACS Applied Polymer Materials · 2023 · IF 5

Chitosan-Comodified Surface-Grafted Thermosensitive Ion-Imprinted Composite Membrane for the Selective Recognition and Separation of ReO4–

Xingsheng Liu,Shengyuan Zhao,Wan Xu,Huijuan Zhang,Siyuan Lu,Zhenbin Chen,Fangfang Niu,Gang Wu

With decreasing global rhenium resources, it has become important to separate and purify rhenium in secondary resources, so a preparation strategy for a chitosan-comodified surface-grafted thermosensitive ion-imprinted composite membrane (CS-Re-TIICM) was developed in this work. The key of this design was that the two ends of a poly(N,N-diethylacrylamide) (PDEA) chain were grafted onto the imprinted polymer separating the layer matrix and the surface of the membrane, respectively, which aimed to improve the selectivity and desorption ratio of this material simultaneously. The structure and morphology of this material were characterized by FTIR and SEM, respectively. In addition, CS-Re-TIICM was applied to the secondary leaching solution of the high-temperature alloy to test the actual separation effect, and results showed that CS-Re-TIICM, possessing thermoresponsive recognition sites, and the structure of the imprinting cavity could be adjusted by temperature, which helped this material achieve good selective separation and purification performance for ReO4–. The maximum adsorption capacity was 0.1071 mmol/g at 35 °C. CS-Re-TIICM not only showed an excellent selectivity (separation ReO4–/MnO4– of 3.90 in the presence of interfering ion MnO4–) but also presented an excellent desorption performance (desorption ratio of 68.94%) and good reusability (adsorption capacity of 0.0425 mmol/g, desorption ratio of 59.13%, and separation degree of 1.24). When CS-Re-TIICM was applied to the secondary leaching solution of high-temperature alloys, the purity of Re was increased from 35.41% to 65.10% after one adsorption/desorption cycle, which depicted a prospective application in the industrialized separation of ReO4– from a complex environment.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Arabian Journal of Chemistry · 2023 · IF 6

Development of a biocompatible green drug release system using salidroside-TiO2-doped chitosan oligosaccharide molecularly imprinted polymers

Zijie Liu,Xingbin Ma,Shuyu Li,Jiajie Qiu,Siyu Liu,Zhifeng Huang,Hongling Lin,A.M. Abd El-Aty

This study focuses on creating a green drug release system using a food-grade titanium dioxide (TiO 2 ) material through surface molecular imprinting. Salidroside (SD) was chosen as the template molecule to synthesize molecularly imprinted polymers (SDT-MIP) utilizing TiO 2 -doped chitosan oligosaccharides as the functional monomer. The SDT-MIPs were characterized using multiple techniques, and their effectiveness was evaluated through an in vitro release study. Additionally, the affinity of SDT-MIPs toward the template molecule was examined using Langmuir and Freundlich adsorption models. The Langmuir model revealed a maximum capacity of 170.41 mg/g and an imprinted factor of 3.4. The study demonstrated that drug release from the SDT-MIPs in simulated gastrointestinal fluid primarily occurred through pure Fick diffusion. The release kinetics exhibited diffusion coefficients ranging from 3.38 × 10 -3 cm 2 /s to 2.78 × 10 -2 cm 2 /s, indicating their biocompatibility and potential application in drug delivery. Furthermore, the SDT-MIP demonstrated no adverse impact on cell viability even at concentrations as high as 1000 μg/mL. The survival rate of cells cultivated in the presence of SDT-MIP solution exceeded 120 ± 12.46%, providing evidence of the excellent biocompatibility and absence of cytotoxicity associated with SDT-MIP. The SDT-MIP possesses favorable sustained-release properties and lacks toxicity, allowing novel drug delivery systems to be created.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Crop & Pasture Science · 2023 ·Vol. 74 ·期 12 ·1318-1333 · IF 1.9

Role of carbon and nitrogen mineralisation of chitosan and crop straws in ameliorating acidity of acidic Ultisols

Jackson Nkoh Nkoh,Peng Guan,Ren-yong Shi,Ru-hai Wang,Jiu-yu Li,Ren-kou Xu

Context Carbon (C) and nitrogen (N) transformation processes in soils play an important role in the fluctuation of soil pH. Incorporation of chitosan and crop straws, byproducts from fishery and agriculture, into acidic soils can increase soil pH through decarboxylation, decomposition, N immobilisation and ammonification.Aims The study was designed to evaluate the transformation of organic N and C from chitosan and/or crop straws and their effects on soil physicochemical properties.Methods Chitosan, rice straw and maize straw were incubated with two acidic Ultisols from Langxi (Soil 1) and Yingtan (Soil 2) differing in initial pH. Six treatments were prepared in triplicate: control (no amendment), 4% chitosan, 4% rice straw, 4% maize straw, 2% chitosan+2% rice straw, and 2% chitosan+2% maize straw. Soil pH, N transformation and CO2 evolution were estimated at different time intervals.Key results After 40days of incubation, control soil pH decreased by 0.35 and 0.32 units for Soils 1 and 2, respectively. Rice straw, maize straw, chitosan, rice straw–chitosan and maize straw–chitosan significantly increased soil pH by 0.51, 0.17, 2.27, 1.78 and 2.02 units for Soil 1, and 0.71, 0.16, 0.67, 0.49 and 0.68 units for Soil 2 (P<0.01). The respective treatments decreased exchangeable acidity by 62%, 51%, 95%, 95% and 95% for Soil 1 and 75%, 69%, 88%, 88% and 87% for Soil 2. In treatments containing chitosan, the pH increase resulted from ammonification of organic N and mineralisation of organic C, with the effect higher in Soil 1 than Soil 2.Conclusions Amending acidic soils with chitosan and crop residues can effectively increase soil pH and slow soil acidification rate.Implications This study provides useful information for amelioration of acidic soils.

CAS / MDL: 9012-76-4
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING SCIENCE · 2023 · IF 4.7

Synthesis, characterization of chitosan-trithiocyanuric and its removal mechanism of Cr(VI) and Pb(II) from wastewater

Wen Wang,Liqiang Qi,Song Han,Hejin Yuan

A new chitosan-trithiocyanuric composite (CS@TMT) was synthesized by graft copolymerization using chloroacetyl chloride as the cross-linking agent. Using response surface analysis, the optimal conditions for the synthesis of CS@TMT were determined as: chloroacetyl chloride concentration of 2.0 mol/L, trithiocyanuric acid (TMT) addition of 7.0 g, and reaction temperature of 70 °C. The successful preparation of CS@TMT was confirmed FTIR spectrum, 13C NMR spectrum, SEM mapping, EDS, XRD and XPS. At ambient temperature (25 °C, pH=6.0, Catalyst dosage=1.0 g/L), the maximum Cr(VI) and Pb(II) adsorption amount of CS@TMT were 194.76 and 101.39 mg/g, respectively, compared to CS (97.15 and 69.76 mg/g). The Cr(VI) and Pb(II) removal process of CS@TMT was better fitted by the pseudo-second-order kinetic model and Langmuir model, and the adsorption process was spontaneous, endothermic and disordered. Under the reduction mechanism, 69.32% of Cr(VI) was reduced to Cr(III) by -SH and –OH group on CS@TMT.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES · 2023 · IF 8.2

A sodium alginate/carboxymethyl chitosan dual-crosslinked injectable hydrogel scaffold with tunable softness/hardness for bone regeneration

Hui Wang,Jueying Yang,Wei Tian,Kelin Peng,Yun Xue,Haosen Zhao,Xilan Ma,Rui Shi,Yu Chen

Recently, injectable dual-crosslinked (DC) hydrogel scaffolds have attracted many attentions as a class of excellent bone regeneration biomaterials with in-situ tunable functions. However, the design of injectable DC hydrogels with cell behavior-compatible network structure and mechanical property remains a bottleneck. Herein, based on the in-situ gelling method, we constructed an injectable CMCS/PEG+SA/CaCl 2 (CPSC) chemical/physical DC hydrogel scaffold with tunable softness/hardness mechanical properties and good biocompatibility. The formation mechanism and properties of the CPSC hydrogel scaffold were investigated by FTIR , XRD, rheometry, and mechanical testing. It is found that proper softness/hardness mechanical properties can be obtained by adjusting the secondary network structure of the hydrogel. The CPSC hydrogel scaffold prepared under optimal conditions can effectively promote cell infiltration , nutrient transport, and the osteogenic differentiation of rat bone mesenchymal stem cells (rBMSCs). The in vivo experiments show that the rBMSCs-loaded injectable CPSC hydrogels with appropriate mechanical properties can effectively promote bone reconstruction . This study has provided important guidance for the construction of injectable DC hydrogels with adjustable softness/hardness to promote osteogenesis for bone defect repair.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
NANOTECHNOLOGY · 2023 · IF 3.5

Strong infiltrative HHC36 antimicrobial peptide/silver nanoparticles-loaded carboxymethyl chitosan/sodium alginate hydrogel for acne vulgaris therapy

Hongju Liu,Jiezhao Zhan,Ruibin Lin,Ying Yin,Li Ren

Acne is a common chronic skin inflammatory disease closely related to Cutibacterium acnes (C. acnes), which affects the life quality of patients worldwide, especially adolescents and young adults. However, the physical barrier of the skin makes drugs difficult to infiltrate effectively into infected site, causing acne hard to cure and easy to recur. Herein, we developed an antibacterial skin dressing with strong infiltration of antibacterial agents which can co-delivery small-molecular antimicrobial agents through stratum corneum deeply into dermis, achieving high antimicrobial efficacy. The antibacterial dressings were constructed with carboxymethyl chitosan/sodium alginate (CMCS/SA) hydrogel loading with HHC36 (an antimicrobial peptide) and silver nanoparticles (AgNPs) conjugates (Ag-H2/CMCS/SA hydrogel). The released Ag-H2 from Ag-H2/CMCS/SA hydrogel can early infiltrate into dermis, co-delivery HHC36 and AgNPs due to the infiltration and targeting of HHC36, presenting the superior antibacterial effect compared to HHC36 or AgNPs alone and killing 100% C. acnes and 100% Staphylococcus epidermidis (S. epidermidis) at a very low concentration of Ag-H2 (15 μg/mL Ag with 7.1 μg/mL HHC36). Meanwhile, Ag-H2/CMCS/SA hydrogel was biocompatible due to the natural polysaccharides carboxymethyl chitosan and sodium alginate. The HaCaT cells spread well in Ag-H2/CMCS/SA hydrogel extracts. These results indicate that the co-delivery small-molecular antimicrobial agents is a promising strategy and Ag-H2/CMCS/SA hydrogel has a great potential in the therapy of acne.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
MOLECULES · 2022 ·Vol. 27 ·期 18 ·5895 · IF 4.927

Disposable Amperometric Label-Free Immunosensor on Chitosan–Graphene-Modified Patterned ITO Electrodes for Prostate Specific Antigen

Liang Yan,Chaoyan Zhang,Fengna Xi

A facile and highly sensitive determination of prostate-specific antigen (PSA) is of great significance for the early diagnosis, monitoring and prognosis of prostate cancer. In this work, a disposable and label-free electrochemical immunosensing platform was demonstrated based on chitosan–graphene-modified indium tin oxide (ITO) electrode, which enables sensitive amperometric determination of PSA. Chitosan (CS) modified reduced graphene oxide (rGO) nanocomposite (CS–rGO) was easily synthesized by the chemical reduction of graphene oxide (GO) using CS as a dispersant and biofunctionalizing agent. When CS–rGO was modified on the patterned ITO, CS offered high biocompatibility and reactive groups for the immobilization of recognition antibodies and rGO acted as a transduction element and enhancer to improve the electronic conductivity and stability of the CS–rGO composite film. The affinity-based biosensing interface was constructed by covalent immobilization of a specific polyclonal anti-PSA antibody (Ab) on the amino-enriched electrode surface via a facile glutaraldehyde (GA) cross-linking method, which was followed by the use of bovine serum albumin to block the non-specific sites. The immunosensor allowed the detection of PSA in a wide range from 1 to 5 ng mL−1with a low limit of detection of 0.8 pg mL−1. This sensor also exhibited high selectivity, reproducibility, and good storage stability. The application of the prepared immunosensor was successfully validated by measuring PSA in spiked human serum samples.Keywords:amperometric immunosensor;graphene composite;chitosan;disposable electrode;prostate-specific antigen

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
APPLIED SURFACE SCIENCE · 2022 · IF 7.392

A chitosan-based Y3+-imprinted hydrogel with reversible thermo-responsibility for the recovery of rare earth metal

Shaobo Ren,Xubing Yang,Liwen Tang,Xueyu Du,Mengting Li,Xueqiong Yin

Recovery of rare earth metal is a global concern for resource-efficient application and high-tech industry development. In this study, a new Y 3+ adsorbent, namely chitosan-based Y 3+ -imprinted hydrogel with reversible thermo-responsibility (CYIT) was synthesized, using Y 3+ as the template ion. The obtained CYIT was comprehensively characterized by means of DSC, FTIR, LRS, TGA, SEM, and XPS. As revealed from the results, CYIT possesses stable reversible thermo-responsibility confirmed by the phase transition temperature ranging from 29.2 °C to 38.4 °C. Its maximum adsorption capacity on Y 3+ is up to 160.0 mg/g, much higher than the corresponding performance of similar hydrogels. More significantly, this type of adsorbent could be effectively regenerated by simply leaching with cold water and the desorption efficiency reached 96.2 % after wash by cold water at 15 °C for 25 min. Besides, the remarkable reusability should also be highlighted, for the adsorption capacity and desorption efficiency remained as 124.8 mg/g and 90.0 %, respectively, after five adsorption–desorption cycles. In the coexistence of other interfering metal ions (including La 3+ , Gd 3+ , Cu 2+ , Al 3+ , and Fe 3+ ), CYIT also exhibited better adsorption selectivity than the corresponding adsorbent without Y 3+ -imprinting.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
MATERIALS CHEMISTRY AND PHYSICS · 2022 · IF 4.778

Excellent compound inhibitor of carboxymethyl chitosan/magnetic reduced graphene oxide for carbon steel in neutral chloride solution

Lingling Wang,Fei Han,Guoping Zeng,Yin Hu,Wei Chen,Fen Zhang,Weiguo Song

As an efficient corrosion inhibitor in acidic medium, carboxymethyl chitosan (CMC) has a limited application in non-acidic medium, due to large consumption and high cost. In the study, magnetic reduced graphene oxide (MRGO) is first introduced into CMC inhibitors to enhance the corrosion inhibition . By optimizing, the best corrosion inhibition efficiency of compound inhibitor is attained as high as 91.78% for carbon steel Q235 in 3.5 wt% NaCl solution, with the remarkably decreased amount of CMC from 800 mg L −1 to 40 mg L −1 . Our work lays a good foundation for expanding the potential application of CMC and MRGO as non-acidic medium corrosion inhibitor.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES · 2022 · IF 8.025

Efficiently ion-enhanced adsorption of anion dyes by acrolein crosslinked polyethylenimine/chitosan hydrogel with excellent recycling stability

Xin Wan,Ziqian Liu,Lingying Xie,Guo Qu,Han Zhang,Biao Wang,Yan Li,Yue-Fei Zhang,Shicheng Zhao

A novel adsorbent acrolein crosslinked polyethylenimine/chitosan hydrogel (A-PEI/CS) was developed with excellent recycling stability and ion-enhanced effect on removing anionic dye (acid blue 93, AB93) from aquatic environment. For AB93, A-PEI/CS was such an adsorbent with the characteristics of high adsorption capacity up to 1212.4 mg/g and continuous recyle ability of more than 15 times. After 15 desorption-regeneration cycles, the removal rate of A-PEI/CS for AB93 could still be as high as 96 % with imperceptibly downward trend. In addition, the addition of salts (KCl, NaCl and CaCl 2 ) could promote the adsorption of A-PEI/CS, and the removal rate would be enhanced with increasing concentration of the salt. The effects of pH (2–7), contact time (30–600 min), temperature (30–50 °C) on the adsorption performance of A-PEI/CS were systematically examined. Furthermore, the physicochemical properties of the adsorbent were analyzed by FT-IR, XPS and zeta potential . The adsorption mechanism can be explained by electrostatic interaction, hydrogen bond interaction, chemical interaction. Intriguing to note that, the adsorption energy of adsorbents was investigated by molecular simulation, and the low pH and common salt environment can promote the adsorption effect, indicating that the prepared adsorbent has excellent application value in the treatment of practical high-salinity wastewater.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES · 2022 · IF 8.025

Multifunctional carboxymethyl chitosan/oxidized dextran/sodium alginate hydrogels as dressing for hemostasis and closure of infected wounds

Mengmeng Xie,Yanbo Zeng,Hang Wu,Shige Wang,Jiulong Zhao

Massive bleeding is a great threat to the life safety of patients, which is a challenging clinical problem. Therefore, it is urgent to develop a kind of multifunctional dressing material with hemostatic ability and antibacterial performance to promote wound healing and repair. To resolve this issue, in this study, a carboxymethyl chitosan (CMCS)/sodium alginate (SA)/oxidized dextran (ODE) (CSO) multifunctional hydrogel was developed. The hydrogel could rapidly gel through Schiff base reaction and amide reaction and firmly adhere to the skin at the wound, to realize the fast hemostasis. Importantly, it was verified that the hydrogel could prevent the Staphylococcus aureus -caused wound infection, owing to the antibacterial effect of CMCS and ODE. In addition, the CSO hydrogel had good water retention capacity and was able to mimic the three-dimensional structure of the natural extracellular matrix, thereby promoting wound repair in mice. In vitro whole-blood clotting assay demonstrated that red blood cells could be adhered to the surface of hydrogel, showing good hemostasis in rat liver injury and tail amputation models. Together with the biocompatible feature, CSO hydrogel holds a great application prospect in hemostasis and wound healing.

CAS / MDL: 25952-53-8 6066-82-6
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
ACS Sustainable Chemistry & Engineering · 2022 · IF 9.224

Strong Silk Fibroin/PVA/Chitosan Hydrogels with High Water Content Inspired by Straw Rammed Earth Brick Structures

Yu-Xiong Ju,Run-Ze Hu,Ping-Yue Wang,Yu-Shi Shen,Fei-Fan Shuang,Jun Wang,Peng Song,Wei-Guo Zhao,Xiao-Hui Yao,Dong-Yang Zhang,Tao Chen

Poly(vinyl alcohol) (PVA) is a safe high-molecular polymer with good biocompatibility that can be prepared into hydrogels with high tensile strength by salting out. However, inorganic ions will cause PVA chains to form strong crystals through intramolecular H-bond interactions, resulting in dehydration of PVA chains and greatly reducing the water content of hydrogels. Herein, inspired by the structural model of straw rammed earth bricks, a PVA, silk nanofiber (SNF), and chitosan (CS) composite hydrogel (PSC) were prepared with a high Young’s modulus (8.85 ± 0.24 MPa), acceptable tensile strength (4 ± 0.28 MPa), and high fatigue threshold (8.09 ± 0.5 kJ/m2). Because SNF plays the role of straw-formed hydrogen bonds (H-bonds) with PVA and CS, the formation of H-bonds between PVA chains was inhibited, leading to more free hydrophilic groups (−OH). Therefore, the water content increased significantly to as high as 87%. By fabricating the structure of straw rammed earth bricks in hydrogels, PSC had both a high Young’s modulus and a high water content, even though the crystallinity of PVA decreased. PSC also showed antibacterial properties against Escherichia coli and Staphylococcus aureus due to CS and are expected to be further applied in biomedicine and tissue engineering.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。