CARBON
·
2025
·
IF 11.6
Xianghong Li,Yuan Shu,Tingkai Zhao,Jalil abdul,Haoxin Duan,Muyang Ma,Tao Jiang,Yanzong Liu
Electromagnetic functional materials are playing an increasingly vital role in electromagnetic interference shielding, stealth protection, and information security. Carbon nanotubes (CNTs), owing to their unique structure and outstanding electromagnetic properties, have attracted widespread attention. Here, a 3D Co/CoO/RGO/CNT crosslinked heterostructure was fabricated by in-situ growth of CNTs on Co(CO 3 ) 0 · 5 (OH)·0.11H 2 O precursors that were crosslinked with reduced graphene oxide through a combined hydrothermal and chemical vapor deposition strategy. The resulting interconnected conductive heterostructures significantly enhanced electron transport, interfacial polarization, and impedance matching. Notably, the optimized composites achieved a minimum reflection loss of −23.95 dB with an effective absorption bandwidth of 4.2 GHz (at 10 wt% filler loading and 2.17 mm thickness), fully covering the X-band. Furthermore, the study of heterointerfaces between different components and their underlying loss mechanisms provides critical insights into the electromagnetic wave absorption behavior and guides the rational design of advanced structural materials. Density functional theory simulations were also employed to investigate the electronic structure and charge distribution at the Co–CoO and Co–CNT interfaces. The simulation results reveal that charge redistribution and the formation of interface dipoles contribute to enhanced dielectric and magnetic losses, offering a microscopic explanation for the superior microwave absorption performance.
✓ 已验证
产品关联
DOI
高影响因子
MICROCHEMICAL JOURNAL
·
2025
·
IF 5.1
Mingmei Ge,Chenxi Wu,Yingjun Wang,Shiyu Wang,Shuohui Li,Xiangkun Tan,Yang Zhao,Huan Wang
This work presents a pioneering approach to convert agricultural waste rice husk into boron‑nitrogen co-doped hierarchical porous carbon (BNRHBC) through a facile one-step chemical etching/pyrolysis strategy, achieving high-value utilization of biomass resources. By employing zinc chloride as the chemical etchant and urea/boric acid as dual dopants, the synthesized BNRHBC exhibits a unique worm-like three-dimensional interconnected porous structure with a large specific surface area and uniform distribution of heteroatoms. The synergistic effect of boron and nitrogen co-doping not only creates abundant active sites but also optimizes the electronic structure of the carbon matrix, significantly enhancing electron transfer kinetics and electrocatalytic activity. When modified onto a glassy carbon electrode, the BNRHBC-based electrochemical sensor demonstrates exceptional performance for acetaminophen detection, including a wide linear range of 0.2–100 μM, a low detection limit of 0.036 μM, excellent anti-interference capability against common ions and organic compounds, and long-term stability with 64.70 % current retention after 30 days. Practical validation in real water samples (diluted tablet extracts and Songhua River) yields satisfactory recovery rates ranging from 87.20 to 107.28 %, confirming its reliability for environmental monitoring. This study bridges sustainable biomass conversion and advanced analytical sensing, offering a cost-effective and eco-friendly solution for pharmaceutical pollutant detection and health risk assessment.
✓ 已验证
产品关联
DOI
高影响因子
Advanced Materials Technologies
·
2025
·
IF 6.2
Jianfei Liu,Xiaolong An,Hui Yang,Kun Han
Overcoming the inherent density-strength-stability trade-off in ceramic aerogels remains challenging. Herein, we present HAlCAs, an ultralight aerogel fabricated by integrating hollow glass microspheres and alumina microfibers within a nano-hydroxypropyl methylcellulose (HPMC) matrix. Utilizing a sol-gel process followed by directional freeze-casting, we construct a deliberately engineered, 3D interwoven scaffold with uniformly dispersed fibers and microspheres. This unique “rigid-yet-flexible” architecture achieves a record porosity of 96% and an ultralow density of 20 mg cm −3 . Critically, it endows HAlCAs with fully recoverable superelasticity across an extreme temperature range (−196°C to 1200°C), while simultaneously suppressing structural collapse and thermal-conductivity surges. The resultant aerogel exhibits exceptional thermal insulation, with a room-temperature conductivity of 0.028 W m −1 K −1 that rises minimally to only 0.046 W m −1 K −1 even at 1200°C. Remarkably, a 20 mm-thick HAlCAs sample reduces the backside temperature by 1000°C when exposed to a 1200°C flame, highlighting its outstanding flame barrier performance. This green, scalable process routinely yields monoliths from abundant, low-cost precursors. Combining ultralow density, high temperature superelasticity, superior thermal insulation, and intrinsic flame retardancy. HAlCAs aerogels offer opportunities for next-generation thermal super-insulators in extreme environments, including hypersonic thermal-protection systems, deep-space insulation cabins, industrial furnaces, and battery packs.
✓ 已验证
产品关联
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2025
·Vol. 51
·期 30
·65388-65397
·
IF 5.6
Jiahao Zha,Chongjun He,Fangzhou Chen,Xianhong Li,Jiayin Song,Chenguang Deng,Qian Li,Lijuan Liu,Mingjun Xia,Yuangang Lu
The fluorescence intensity ratio (FIR) technique has emerged as a pivotal approach in non-contact optical thermometry, offering substantial application potential. In this study, Y 3 Al 5 O 12 (YAG) phosphors co-activated with Ce 3+ and Cr 3+ ions were successfully synthesized through a high-temperature solid-state reaction method. Spectroscopic analysis revealed efficient energy transfer between the dopant ions, manifesting as distinct luminescence intensity variations compared to their single-doped counterparts. Under 450 nm excitation, the system demonstrates prominently yellow-green emission from Ce 3+ ions and well-resolved red emission from Cr 3+ ions, ensuring excellent spectral discrimination. Capitalizing on the differential thermal response between the two luminescent centers, the developed system achieves remarkable temperature sensing performance. The FIR method yields a maximum relative sensitivity of 0.845 % K −1 , maintaining sensitivity above 0.6 % K −1 throughout the 340–580 K range, coupled with exceptional temperature resolution below 0.03 K. Furthermore, we have engineered a novel FIR thermometry system incorporating 3D-printed spectral modules and fiber-optic phosphor encapsulation. The integrated system demonstrates superior sensing capabilities, reaching sensitivity values of 1.23 % K −1 in Cr 3+ lifetime mode and 4.64 % K −1 in FIR mode. These results indicate that Ce/Cr co-doped YAG has exceptional potential in multimodal optical thermometry applications.
✓ 已验证
DOI
高影响因子
ACTA PHYSICO-CHIMICA SINICA
·
2014
·Vol. 30
·期 1
·150-156
·
IF 0.886
YANG Bing-Jian,WANG Hong,Li Lei,HUANG Bo-Wen,LIAO Xiao-Zhen,HE Yu-Shi,MA Zi-Feng
The development of low-cost and effective electrocatalysts for air electrodes is critical for practical applications of lithium/oxygen batteries. In the present work, phenanthroline (phen) was used as a ligand to prepare a Co(phen)2 complex. The Co(phen)2 complex
was coated on BP2000 and then heat treated at 600, 700, 800, and 900 , to obtain carbon-supported Co-N (Co-N/C) catalysts. The catalytic activities in oxygen reduction reaction/oxygen evolution reaction (ORR/OER) of the prepared catalysts were measured and compared with those of a typical
carbon-supported cobalt tetramethoxyphenylporphyrin (CoTMPP/C) catalyst. The influence of the calcination temperature on the composition and structure of the Co-N/C catalysts was investigated. Electrochemical tests showed that the Co-N/C catalysts prepared at 700 and 800 gave better performances,
comparable to that of the CoTMPP/C catalyst. The superior electrochemical performance of the prepared Co-N/C catalysts and the low cost of the phenanthroline chelating agent make Co-N/C a promising cheap catalyst for lithium/oxygen batteries.
✓ 已验证
DOI
高影响因子
Nature Communications
·
2024
·Vol. 15
·期 1
·1-9
·
IF 14.7
Yao Yueliang,Tse Yuen Cheong,Lai Samuel Kin-Man,Shi Yixiang,Low Kam-Hung,Au-Yeung Ho Yu
Responsive synthetic receptors for adaptive recognition of different ionic guests in a competitive environment are valuable molecular tools for not only ion sensing and transport, but also the development of ion-responsive smart materials and related technologies. By virtue of the mechanical chelation and ability to undergo large-amplitude co-conformational changes, described herein is the discovery of a chameleon-like [2]catenane that selectively binds copper(I) or sulfate ions and its associated co-conformational mechanostereochemical switching. This work highlights not only the advantages and versatility of catenane as a molecular skeleton in receptor design, but also its potential in constructing complex responsive systems with multiple inputs and outputs.
✓ 已验证
DOI
PubMed
高影响因子
APPLIED SURFACE SCIENCE
·
2024
·
IF 6.3
Quan Zhou,Xingjian Dai,Xinfang Zhang,Xiaoying Liu,Jinsong Rao,Yuxin Zhang,Yi Hou
The harsh marine environment demands enhanced corrosion resistance and compatibility of wave-absorbing materials for ship platforms. Urgently required are wave-absorbing composites with both efficient performance and corrosion resistance. In this work, a core–shell composite NiCoFe LDH@SiC nw was specifically designed and synthesized using a one-step hydrothermal in-situ growth method. Through precise tuning of the LDH content on the composite surface, combined with the principle of impedance matching, the dielectric loss is kept within a moderate range. The effective absorption bandwidth (EAB) of LDH 2 @SiC nw at a thickness of 2.47 mm is as high as 6.19 GHz when the filling ratio is only 3 %. Because the synergistic effect of the porous LDH shell and the core–shell heterostructure to enhance the dielectric loss and multiple scattering absorption of microwave in the composite. Significantly, the LDH 2 @SiC nw anti-corrosion coating exhibits exceptional long-term corrosion resistance owing to the barrier effect provided by SiC nw and the Cl - inhibition of LDH, the |Z| 0.01Hz remains at 7.8 × 10 9 Ω·cm 2 even after 30 days of immersion in 3.5 wt% NaCl solution. Hence, the LDH@SiC nw composites developed in this study hold significant potential in advancing the progress of functionalized MA materials with enhanced corrosion resistance.
✓ 已验证
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2024
·
IF 6.3
Siwen Gong,Gangqiang Zhu,Xiaoqian Xie,Fei Rao,Lujun Zhu,Yurong An,Xianjin Shi,Yu Huang,Peng Liu,Mirabbos Hojamberdiev
A novel interface of MnO 2 with CuO with multivalent conversion is fabricated by the deposition-precipitation method for low-temperature and efficient CO oxidation. It is found that the temperature for CO thermal-catalytic oxidation to reach a complete conversion significantly decreases to 105 °C for the CuO/MnO 2 . A combination of experimental and theoretical studies demonstrates the successful formation of the CuO/MnO 2 interface, inducing a pronounced effect that promotes CO oxidation. The CuO/MnO 2 interface leads to the formation of Cu-O-Mn, a superior redox system with multivalent conversion (Cu + + Mn 4+ ↔ Cu 2+ + Mn 3+ , Cu + + Mn 3+ ↔ Cu 2+ + Mn 2+ ), abundant active sites, excellent ability to activate O 2 , the rapid oxygen transfer, and more suitable adsorption energy for O 2 , CO, and CO 2 . These characteristics are advantageous to Cu x O-Mn x O y for achieving a 100 % removal of CO at a lower temperature. Furthermore, the computational study reveals that the CO oxidation process follows two mechanistic pathways (Eley-Rideal (E-R) and Mars-van Krevelen (M-K)), indicating that there is no competitive adsorption of CO and O 2 on the CuO/MnO 2 . This study shows that the interface created between suitable metal oxides can improve the catalytic performance and provides new perspective for catalyst design and performance enhancement mechanisms.
✓ 已验证
DOI
高影响因子
JOURNAL OF NUCLEAR MATERIALS
·
2023
·
IF 3.1
S. Krat,A. Prishvitsyn,Yu. Gasparyan
A probabilistic and diffusion-based model describing concentrations of multiple hydrogen isotopes simultaneously co-depositing with slowly grown metal layer is given. The conditions modeled are identical to stationary ion implantation into bulk material with infinite fluence. Ratios of different multiple hydrogen isotopes occupying same trapping sites in metal layers co-deposited from plasma are estimated. It is shown that if hydrogen isotopes have different detrapping energies in regards to the same trap (vacancy, dislocation, etc.), only the concentration of the isotope with highest detrapping energy decreases monotonously with deposition temperature. The uncertainty of tritium concentration in co-deposited layer based on the uncertainty in detrapping energy of tritium and deuterium is evaluated; for an 0.01 eV difference, a >10% tritium concentration uncertainty is predicted.
✓ 已验证
DOI
高影响因子
RSC Advances
·
2016
·Vol. 6
·期 90
·86889-86903
·
IF 3.289
H. L. Pan,Q. Q. Liu,Y. H. Zhang,H. T. Wu
Wolframite structure Zn1−xCoxZrNb2O8 (x = 0, 0.02, 0.04, 0.06, 0.08, 0.10) ceramics were prepared by the conventional solid state method. The crystal structures were studied via X-ray diffraction, and lattice vibrational modes were obtained by Raman spectroscopy. It could be found that all the A-site (Zn2+/Co2+, Zr4+) and B-site (Nb5+) cations were octahedrally coordinated with oxygen anions from the diagrammatic sketch of the crystal structure. Rietveld refinement was used to analyze the crystal structure and the lattice parameters were obtained. Based on the complex chemical bond theory and lattice parameters, intrinsic factors such as the bond ionicity, lattice energy, bond energy and coefficient of thermal expansion were calculated. Based on the results, Nb–O bonds played an important role in affecting the microwave dielectric proprieties of Zn1−xCoxZrNb2O8 ceramics. Co2+ substitution would affect the crystal structure and influence the microwave dielectric properties. The tendency of the dielectric constant (εr) could be predicted by the polarizability and bond ionicity of Nb–O bonds, and the εr showed the same tendency with Raman shifts of Nb–O vibration modes. The variation of the quality factor (Qf) could be explained by the change of the lattice energy of Nb–O bonds and the full width at half maximum (FWHM) values of Nb-site Raman modes. The temperature coefficient of resonant frequency (τf) showed the same tendency with the bond energy, octahedral distortion and bond valence of Nb–O bonds, and the opposite tendency with the thermal expansion coefficient.
✓ 已验证
DOI
高影响因子
Reaction Chemistry & Engineering
·
2020
·Vol. 6
·期 1
·112-118
·
IF 3.441
Renjie Huang,Yanxin Wang,XiXi Liu,Peng Zhou,Shiwei Jin,Zehui Zhang
The selective hydrogenation of nitro compounds into their corresponding azo compounds is challenging in organic synthesis. In this study, we have developed a facile and efficient catalytic system for the transformation of nitro compounds into azo compounds under mild conditions over a heterogeneous cobalt catalyst (Co–Nx/C-800-AT). The Co–Nx/C-800-AT catalyst was found to be highly active for the reductive-coupling of nitro compounds into azo compounds in ethanol at 110 °C and 2.5 bar H2 pressure with the addition of NaOH as an additive, affording structurally-diverse azo compounds with satisfactory yields (70.4–98.3%). The developed method demonstrated several advantages such as high catalytic activity and high selectivity with tolerance to other functional groups and high stability.
✓ 已验证
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2023
·
IF 5.2
Ruiheng Xiang,Huaicheng Xiang,Jie Li,Ying Tang,Liang Fang
The microwave dielectric properties of NdNbO 4 (NN) ceramics were optimized by substituting Ca 2+ at the A-site and W 6+ at the B-site. (1- x )NdNbO 4 - x CaWO 4 (NNCW x ) ( x = 0–0.3) ceramics crystallize in the monoclinic fergusonite structure (space group I 2/ a ), whereas NNCW-0.4 exhibits a tetragonal scheelite structure (space group I 4 1 / a ), suggesting that Ca 2+ /W 6+ doping effectively contributed to the ferroelastic phase transition. A near-zero temperature coefficient of resonant frequency ( τ f ) of +7.8 ppm/°C, a high Q × f value of 59,190 GHz, and a low permittivity ( ε r ) of 17.51 were obtained for the NNCW-0.3 ceramic. With the increase of x , the permittivity decreases gradually, while τ f shows the opposite trend. The permittivity is mainly affected by the polarizability per unit molar volume ( α / V m ) and the rattling effect of A-site cations (Nd 3+ and Ca 2+ ). The Q × f values of NNCW x ceramics are mainly affected by relative density, packing fraction, and lattice energy ( U ). The influencing mechanism of τ f is a combination of an increase in the temperature coefficient of ion polarizability ( τ αm ), lattice strain, and phase transition.
✓ 已验证
DOI
高影响因子