文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第3025至3036个,产品总数3,922个

切换升序
MXene
Advanced Materials Interfaces · 2023 ·Vol. 11 ·期 7 ·2300851 · IF 5.4

L-Cysteine-Encapsulated MXene Nanosheet Possessing Ultra-Antioxidation in Aqueous Suspension for Electrophoretic Deposition Assisted Carbon-Fiber-Surface Modification

Ling Huang,Zheyuan Du,Yanhong Tian,Jiangman Sun,Jinglong Li,Yue Xing,Xiubing Liang,Xuejun Zhang

With recent progress in 2D materials, Ti 3 C 2 T x MXene featured high metallic electrical conductivity, high electromagnetic interference shielding effectiveness, and super in-plane stiffness, exhibits unique advantages in many fields, but is rarely applied as a sizing agent in long-time continuous processing of carbon fiber sizing because of its poor ambient stability in aqueous suspension. Herein, a new strategy to chemically encapsulate the reactive sites of MXene nanosheet with l -cysteine for restricting the attacking of water and/or oxygen in aqueous suspension is proposed. Based on the ultra-antioxidation, polarity, and electrical properties of l -cysteine-encapsulated Ti 3 C 2 T x MXene (LC-MX) nanosheet, the LC-MX, even if aging for weeks in aqueous suspension, can be deposited on the surface of high-modulus carbon fiber (HMCF) uniformly via the electrophoretic deposition assisted sizing. Benefiting from the enhanced surface energy, wettability, and roughness of LC-MX-sized HMCF (HMCF-LCMX) relative to that of unsized one (U-HMCF), the interfacial property of HMCF-LCMX/epoxy (EP) composites is also improved, for which the interlayer shear strength (ILSS) of the composite reached 88.5 MPa, 52.8% higher than that of U-HMCF/EP composite (57.9 MPa). This work makes an essential step toward the application of ultra-stable MXene nanosheet suspension in large-scale continuous carbon fiber sizing.

CAS / MDL: 7447-41-8
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
BIOSENSORS & BIOELECTRONICS · 2023 · IF 12.6

Highly stable glucose oxidase polynanogel@MXene/chitosan electrochemical biosensor based on a multi-stable interface structure for glucose detection

Xinglai Tong,Lin Jiang,Qi Ao,Xiaoxiao Lv,Ying Song,Jun Tang

It is a challenging and meaningful task to design an enzyme electrochemical biosensor that can maintain high sensitivity while improving stability. In this study, we constructed an enzyme electrochemical biosensor by preparing nanocomposites with multi-stable interface structures . Specifically, the nanocomposite (PGOx@MXene/CS) was prepared by efficient electrostatic assembly of GOx polynanogel (PGOx) onto MXene nanosheets . PGOx could enhance enzyme stability , while the extensive the large specific surface area of MXene could realize the efficient loading of nanocapsules (PGOx) and catalyze the decomposition of toxic intermediate H 2 O 2 , thereby reducing its influence on the stability of enzyme. The linear range of the constructed glucose sensor was 0.03–16.5 mM, the sensitivity was 48.98 μA mM −1 ·cm −2 , and the detection limit was 3.1 μM. After 200 cycles, the current still remained at 85.83% of the initial current value. The high sensitivity, excellent selectivity and great reproducibility verified the effectiveness of the system we constructed. The multi-stable enzyme electrochemical biosensor had a wide application prospect in stable and continuous blood glucose detection.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
Analytical Methods · 2023 ·Vol. 16 ·期 2 ·244-252 · IF 3.1

A novel electrochemical sensing method based on an amino-functionalized MXene for the rapid and selective detection of Hg2+

Jinquan Liu,Jiao Shi,Miao Zhong,Yating Wang,Xinxin Zhang,Wenyu Wang,Zhijun Chen,Yan Tan,Dongyun Xu,Shengyuan Yang,Le Li

Mercury is a highly toxic element that is widely present in all types of environmental media and can accumulate in living organisms. Prolonged exposure to high levels of mercury can lead to brain damage and death, so the detection of mercury is of great importance. In this study, a cost-effective and easy-to-operate electrochemical sensing method was successfully developed based on an amino-functionalized titanium-based MXene (NH2–Ti3C2Tx) for the rapid and selective detection of Hg2+ that could have a coordination effect with the –NH2 group of NH2–Ti3C2Tx to promote the efficient accumulation of Hg2+. In this strategy, the NH2–Ti3C2Tx was first modified on glassy carbon electrodes (GCE) to fabricate the electrochemical sensor. Benefiting from the excellent electrical conductivity, abundant active sites, and strong adsorption capacity performance of the NH2–Ti3C2Tx, the NH2–Ti3C2Tx modified GCE (NH2–Ti3C2Tx/GCE) exhibited satisfactory selectivity and enhanced square wave anodic stripping voltammetry (SWASV) measurement for the rapid detection of trace amounts of Hg2+ in aqueous solutions. The electrochemical sensor was found to be capable of detecting Hg2+ with a low detection limit of 8.27 nmol L−1 and a linear range of 0.5 μmol L−1 to 50 μmol L−1. The response time of the electrochemical sensing method was 308 s. In addition, the electrochemical sensing method has good selectivity, repeatability and stability, and multiple heavy metal ions have no effect on its detection, with repeatability and stability RSDs of 1.68% and 1.43%, respectively. Furthermore, the analysis of practical water samples demonstrated that the developed method was highly practical for the actual determination of Hg2+ with recoveries in the range of 99.22–101.90%.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
Batteries & Supercaps · 2023 · IF 5.7

Tuning the Electrochemical Performance of Multiple Phased Selenides@C/MXene Composites via Controllable Synthesis of Multivariate Metal-Organic Frameworks

Weiquan Liang,Mingjie Liu,Xiaoyan Shi,Bin Chen,Lianyi Shao,Junling Xu,Zhipeng Sun

Graphical A solvent-free method was used to realize the efficient component regulation of target multivariate MOFs/MXene-derived multi-metal selenides@C/MXene (NCMS@C/MX) composites. The electrochemical performance of these composites can be optimized due to the intrinsic characteristics of the containing metal selenides. Metal-organic frameworks (MOFs) are excellent precursors for electrode materials preparations. Synergistic effects may exist between different metal centers in multivariate MOFs, making them often more effective than single-metal MOFs. Herein, we propose an atom economic mechanochemical method to realize the efficient component regulation of target multivariate MOFs. Moreover, by combining the synthesis of multivariate MOFs and exfoliating MXene, multivariate MOF/MXene composites can be obtained via a one-step strategy. A further selenization process can derive them into selenides@C/MXene composites. These derived composites contain multiple nanostructured metal selenides embedded in multi-heteroatom doped carbon matrix. For these composites, abundant heterojunction structures are formed, which can build internal self-built electric field and enhance the reaction kinetics effectively for sodium-ion storage. More importantly, the electrochemical performance of NCMS@C/MX composites can be optimized due to the intrinsic characteristics of the containing metal selenides. Overall, experimental results demonstrate the universality of this solvent-free synthesis route for controllable preparation of high-performance selenides@C/MXene electrode materials. It provides a feasible and environmentally friendly method to adjust metal ratios for optimal energy storage performance. We hope this research inspires optimization strategies for high-performance electrode materials and leads to the development of energy storage materials with more rational structures and better performance.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Materials Today Energy · 2023 · IF 9.3

Selective photothermal reduction of CO2 to CH4 via the synergistic effect of Ni-nanoparticle@NiO-nanosheet/V2C-MXene catalyst

Fangyuan Zhang,Xueli Zhang,Shan Hu,Huilin Hu,Jinhua Ye,Defa Wang

Photothermal catalytic carbon dioxide (CO 2 ) reduction has attracted increasing research attention as a promising method for recycling CO 2 and producing renewable energy. However, it remains a challenge in the improvement of catalytic activity with regulated product selectivity in view of practical applications. Herein, we develop the two-dimensional layered V 2 C MXene (VC) supported Ni nanoparticle and NiO nanosheet (Ni@NiO/VC) composite as an efficient catalyst for selective photothermal reduction of CO 2 to CH 4 . The optimal 0.8Ni@NiO/VC catalyst exhibits 48.1 % CO 2 conversion with an evolution rate of 33.2 mmol/g cat /h and 99.2 % selectivity for CH 4 production under a 300 W full-arc xenon lamp irradiation. Moreover, a long-term cyclic photothermal CO 2 reduction reaction demonstrates the excellent stability of 0.8Ni@NiO/VC. The enhanced photothermal CO 2 reduction activity with a high CH 4 selectivity could be attributed to the large specific surface area and excellent photothermal effect of V 2 C MXene, and the synergistic effect of Ni and NiO on adsorption/activation of H 2 and CO 2 molecules. This work provides a feasible strategy for the construction of efficient photothermal CO 2 reduction catalyst by properly incorporating transition metal nanoparticles and metal oxide with a suitable MXene.

CAS / MDL: 13478-00-7
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
COMPOSITES SCIENCE AND TECHNOLOGY · 2023 · IF 9.1

Highly conductive and mechanically robust MXene@CF core-shell composites for in-situ damage sensing and electromagnetic interference shielding

Yi Hu,Junzhen Chen,Guoyu Yang,Yujun Li,Ming Dong,Han Zhang,Emiliano Bilotti,Jianjun Jiang,Dimitrios G. Papageorgiou

In this work, a new type of carbon fiber reinforced polymer (CFRP) composite was fabricated by introducing MXene nanoparticles onto the surface of carbon fibers (CF) via electrophoretic deposition (EPD) followed by thermal annealing. The MXene-reinforced CF/epoxy composites displayed enhanced mechanical properties and electrical conductivity as well as in-situ damage sensing capability. The uniformly deposited MXene nanoparticles contributed to a considerable enhancement of the flexural strength of CFRPs through hydrogen bonding and mechanical interlocking. The thermal annealing treatment reduced the amount of oxygen groups on the surface of MXene nanoparticles and enabled a 66 % increase of the out-of-plane electrical conductivity and a 20 % improvement of the electromagnetic interference (EMI) shielding effectiveness. The exceptional EMI performance of the core-shell hierarchical microstructure can be ascribed to the polarization of the inhomogeneous interfaces, the dipole polarization, and the conductive loss effect as a result of the presence of annealed MXenes on the surface of CFs.

CAS / MDL: 7789-24-4 7791-18-6
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
LANGMUIR · 2023 · IF 3.9

Multifunctional, Self-Adhesive MXene-Based Hydrogel Flexible Strain Sensors for Hand-Written Digit Recognition with Assistance of Deep Learning

Hao Zhang,Dongzhi Zhang,Huixin Luan,Zihu Wang,Pengfei Zhang,Guangshuai Xi,Xinyi Ji

The conductive hydrogel as a flexible sensor not only has certain mechanical flexibility but also can be used in the field of human health detection and human–computer interaction. Herein, by introduction of tannic acid (TA) with MXene into the polyacrylamide (PAM)/carboxymethyl chitosan (CMC) double-network hydrogel, a hydrogel with high stretchability, self-adhesion, and high sensitivity was prepared. CMC and PAM form a semi-interpenetrating double-network of high toughness and durability through electrostatic interactions and multiple hydrogen bonding networks. The abundant hydrophilic functional groups on TA and MXene form multiple hydrogen bonds simultaneously with the polymer network, ensuring high stretchability and sensitivity of the hydrogel. The hydrogel can display an accurate response to a variety of stimulus signals and can monitor both human joint movements and small physiological signal changes. It can also be combined with deep learning algorithms to classify handwritten digits with an accuracy rate of 98%. This work can promote the application of hydrogel sensors with durability and high sensitivity. The combination of algorithms and flexible sensors provides important ideas for the further development of flexible devices.

CAS / MDL: 79-06-1 27776-21-2
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
ACS Applied Materials & Interfaces · 2023 · IF 9.5

Subtractive Nanopore Engineered MXene Photonic Nanomedicine with Enhanced Capability of Photothermia and Drug Delivery for Synergistic Treatment of Osteosarcoma

Tiankun Hui,Jianye Fu,Bingxin Zheng,Chenchen Fu,Baocai Zhao,Tianqi Zhang,Yifan Zhang,Chen Wang,Liangmin Yu,Yunlong Yang,Bin Yue,Meng Qiu

Two-dimensional (2D) nanomaterials as drug carriers and photosensitizers have emerged as a promising antitumor strategy. However, our understanding of 2D antitumor nanomaterials is limited to intrinsic properties or additive modification of different materials. Subtractive structural engineering of 2D nanomaterials for better antitumor efficacy is largely overlooked. Here, subtractively engineered 2D MXenes with uniformly distributed nanopores are synthesized. The nanoporous defects endowed MXene with enhanced surface plasmon resonance effect for better optical absorbance performance and strong exciton–phonon coupling for higher photothermal conversion efficiency. In addition, porous structure improves the binding ability between drug and unsaturated bonds, thus promoting drug-loading capacity and reducing uncontrolled drug release. Furthermore, the porous structure provides adhesion sites for filopodia, thereby promoting the cellular internalization of the drug. Clinically, osteosarcoma is the most common bone malignancy routinely treated with doxorubicin-based chemotherapy. There have been no significant treatment advances in the past decade. As a proof-of-concept, nanoporous MXene loaded with doxorubicin is developed for treating human osteosarcoma cells. The porous MXene platform results in a higher amount of doxorubicin-loading, faster near-infrared (NIR)-controlled doxorubicin release, higher photothermal efficacy under NIR irradiation, and increased cell adhesion and internalization. This facile method pioneers a new paradigm for enhancing 2D material functions and is attractive for tumor treatment.

CAS / MDL: 7664-39-3 81-88-9
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
Journal of Materials Chemistry B · 2023 ·Vol. 11 ·期 47 ·11251-11264 · IF 7

High strength, self-healing sensitive ionogel sensor based on MXene/ionic liquid synergistic conductive network for human-motion detection

Xiao Wen,Zhipeng Deng,Hui Wang,Jianyang Shi,Shuang Wang,Haibo Wang,Yueming Song,Zongliang Du,Jinghong Qiu,Xu Cheng

Ionogels with both high strength and high conductivity for wearable strain and pressure dual-mode sensors are needed for human motion and health monitoring. Here, multiple hydrogen bonds are introduced through imidazolidinyl urea (IU) as a chain extender to provide high mechanical and self-healing properties for the water–borne polyurethane (WPU). The MXene/ionic liquids synergistic conductive network provides excellent conductivity and also reduces the relative content of ionic liquids to maintain the mechanical properties of the ionogels. The mechanical strength of this ionogel reached 1.81–2.24 MPa and elongation at break reached 570–624%. It also has excellent conductivity (22.7–37.5 mS m−1), gauge factor (GF) (as a strain sensor, GF = 1.8), sensitivity (S) (as a press sensor, S1 = 29.8 kPa−1, S2 = 1.3 kPa−1), and fast response time (as a strain sensor = 185 ms; as a press sensor = 204 ms). The ionogel also exhibits rapid photothermal self-healing capabilities due to the inherent photothermal behavior of MXene. It can maintain good elasticity and conductivity at low temperatures. In addition, this ionogel is able to stretch for 1200 cycles without significant change in the relative change of resistance. The ionogel can be assembled as a strain sensor for monitoring human motion and as a pressure sensor array for obtaining pressure magnitude and position information.

CAS / MDL: 39236-46-9
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS · 2023 · IF 5.2

Multilayer Ti3C2Tx MXene/graphene oxide/carbon fiber fabric/thermoplastic polyurethane composite for improved mechanical and electromagnetic interference shielding performance

Ningmin Duan,Zhenyu Shi,Jilai Wang,Chengpeng Zhang,Jianren Xi,Xiaotao Yang,Guilong Wang

The development of flexible electronics has placed higher demands on electromagnetic interference (EMI) shielding materials, especially in terms of mechanical properties. Herein, a novel composite with excellent mechanical and EMI shielding properties was developed. The electrohydrodynamic atomization deposition approach was used to deposit Ti 3 C 2 T x MXene and graphene oxide (GO) nanosheets on carbon fiber fabric (CFf) surface, then they were assembled layer by layer with thermoplastic polyurethane (TPU) and thermoformed at high temperature to obtain MG/f-CFf/TPU composite. When the MXene/GO content increases, the mechanical performance of the composite is improved, mainly owing to the formation of chemical bonds and the presence of mechanical interlocking and van der Waals forces . Specifically, the tensile strength and interlaminar shear strength of the composite reach 140.98 MPa and 54.67 MPa, increasing by 72.45 % and 52.92 %, respectively. Benefitting from the unique lamellar structure , the maximum EMI-SE of MG/f-CFf/TPU composite is 38.29 dB. Besides, the MG/f-CFf/TPU composite also displays outstanding EMI-SE stability after 3000 times folding cycles. The flexible MG/f-CFf/TPU composite may provide more guidelines for the design of next-generation flexible EMI shielding materials.

CAS / MDL: 919-30-2
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CERAMICS INTERNATIONAL · 2023 · IF 5.2

Designing advanced 0D/2D heterojunctions of N, S-co-doped carbon dots/Ti3C2Tx MXene nanosheets in electrochemical sensor applications

Yaru Hou,Fanyong Yan,Xinyi Bai,Xin Wei,Liang Chen,Yang Fu

Ti 3 C 2 T x MXene has demonstrated well-established sensitivity in electrochemical sensing but is susceptible to oxidation . Nitrogen-sulfur doped carbon dots (N, S-CDs) were functionalized on Ti 3 C 2 T x MXene nanosheets via a surface modification strategy, leading to significant enhancement in the performance of Ti 3 C 2 T x MXene. The incorporation of N, S-CDs into Ti 3 C 2 T x MXene nanosheets effectively prevents the aggregation of Ti 3 C 2 T x MXene flakes, resulting in improvement of the interlayer spacing to 1.578 nm and a threefold expansion of the specific surface area. Furthermore, the N, S-CDs contribute to increase the effective active surface area of the Ti 3 C 2 T x MXene electrode, facilitating accelerated the electron transfer rates and providing additional active sites. On this basis, a galvanic sensor for dopamine (DA) detection was attained through loading N, S-CDs/Ti 3 C 2 T x on glassy carbon electrodes. The optimized sensor achieved a linear detection range of 1 μM–1000 μM for DA, with a detection limit of 0.91 μM (S/N = 3). This work presents a promising approach for the utilization of chemically stable Ti 3 C 2 T x MXene and MXene-based sensors, offering a new avenue for quantitative detection of DA that holds potential for application in real sample analysis.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Nano-Micro Letters · 2021 ·Vol. 13 ·期 1 ·1-11 · IF 16.419

In-Situ Annealed Ti3C2Tx MXene Based All-Solid-State Flexible Zn-Ion Hybrid Micro Supercapacitor Array with Enhanced Stability

Li La,Liu Weijia,Jiang Kai,Chen Di,Qu Fengyu,Shen Guozhen

Flexible Zn-ion hybrid micro-supercapacitors (MSCs) array was fabricated with Ti 3 C 2 T x as the cathode via laser direct writing method, which present ultrastability up to 50,000 cycles after in-situ annealed treatment. A digital timer driven by the obtained single MSC under bending state, together with a flexible LED displayer of the “TiC” logo lighted by the MSC arrays under twisting, crimping and winding conditions demonstrate the great potential application of the MSCs in integrated wearable electronics.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。