Polymer-Plastics Technology and Materials
·
2023
·
IF 2.7
Qianyong Liang,Ying Pan,Jia Du,Dong Zhang,Yan Zhang,Zhishun Zhong,Hongting Zhao
Carbon sphere@layered double hydroxides filled cellulose nanofibers (ACS@LDHs/CNF) aerogel was successfully synthesized. The removal rate of Cr(VI) using ACS@LDHs/CNFs aerogel at a solid-liquid ratio of 1 g/L was 89.4%, which was higher compared to the removal rate of 65.2% using LDHs alone. The adsorption capacity of ACS@LDHs/CNFs for Cr(VI) was determined to be 44.9 mg/g. The adsorption kinetics followed the pseudo-second-order kinetic equation, and the isotherm data showed good agreement with the Langmuir model. The adsorption mechanism of Cr(VI) onto ACS@LDHs/CNFs aerogel was also investigated. Additionally, the ACS@LDHs/CNFs aerogel demonstrated consistent high adsorption efficiency over 4 consecutive cycles of adsorption-regeneration.
✓ 已验证
产品关联
DOI
高影响因子
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
·
2023
·
IF 4.2
Ge Li,Bingtao Zhang,Zhe Tan,Ling Jiang,Zhikan Yao,Lin Zhang
Cellulose, a sustainable raw material, holds great promise as an ideal candidate for membrane materials. This work focused on establishing a green route for fabricating cellulose nanofiltration membranes by reusing a binary solvent of a mixture of ionic liquid (IL) 1-ethyl-3-methylimidazolium acetate and dimethyl sulfoxide (DMSO). The rheological and thermodynamic properties of cellulose solutions were thoroughly investigated to gain fundamental insights into cellulose membrane formation using a mixture solvent. The morphologies and separation performances of the cellulose membranes were also studied. Based on these results, we successfully developed a cellulose membrane with a remarkable water flux of 101.8 L/m2·h, and the rejections for both Congo Red and Evans Blue were higher than 99.7%. Furthermore, the cellulose membrane demonstrated excellent antifouling performance and stability in long-term operation. Moreover, we conducted an attempt on the recycling and reuse of IL and DMSO, revealing that the structure and separation performance of the cellulose membrane produced using the recovered solvent were comparable to those of the membrane obtained using the original solvent. These results highlighted a sustainable approach to fabricating high-performance cellulose membranes.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2023
·
IF 9.5
Guomeng Zhang,Guangkai Chen,Mei Dong,Jun Nie,Guiping Ma
Covalent organic frameworks (COFs) have a wide application prospect in wastewater treatment because of their unique structure and properties; however, the preparation of pure COF membranes remains a great challenge by reason of the insolubility and unprocessability of COF powders formed at high temperature and high pressure. In this study, a continuous and defect-free bacterial cellulose/covalent organic framework composite membrane was prepared by using bacterial cellulose (BC) and a porphyrin-based COF with their unique structures and hydrogen bonding forces. The dye rejection rate of this composite membrane toward methyl green and congo red was up to 99%, and the permeance was about 195 L m–2 h–1 bar–1. It showed excellent stability under different pH conditions, long-time filtration, and cyclic experimental conditions. In addition, the hydrophilicity and surface negativity of the BC/COF composite membrane made it have certain antifouling performance, and the flux recovery rate can reach 93.72%. More importantly, the composite membrane exhibited excellent antibacterial properties due to the doping of the porphyrin-based COF, and the survival rates of both Escherichia coli and Staphylococcus aureus were less than 1% after exposure to visible light. The self-supporting BC/COF composite membrane synthesized by this strategy also has outstanding antifouling and antibacterial properties, in addition to excellent dye separation effects, which greatly broaden the application of COF materials in water treatment.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Molecular Catalysis
·
2023
·
IF 4.6
Yi Liu,Shuangjiang Li,Xiaojian Yu,Ying Chen,Xiaoning Tang,Tianding Hu,Lan Shi,Manoj Pudukudy,Shaoyun Shan,Yunfei Zhi
For the simultaneous attainment of the utilization of renewable biomass resources and the mitigation of greenhouse effects, it is very promising to develop a green, recyclable, and highly efficient heterogeneous catalyst for the synthesis of cyclic carbonates by CO 2 cycloaddition reaction with epoxides. Herein, novel cellulose nanofibers (CNF) supported (Salen)Cr(Ⅲ) complex was effectively synthesized for the aforementioned reaction. The cellulose nanofibers (CNF) were firstly modified with (3-aminopropyl) triethoxysilane (APTES), and then its Schiff base with salicylaldehyde was synthesized, which further subjected to coordination treatment with chromium chloride to form a novel heterogeneous catalyst, labelled as CNF-(Salen)Cr(Ⅲ). The catalytic performance of the catalysts shown that CNF-(Salen)Cr(Ⅲ) and co-catalyst TBAB can synergistically catalyze the cycloaddition of CO 2 with epichlorohydrin (ECH) at mild reaction conditions, and the yield of chloropropene carbonate (CPC) reached up to 97.8% with high selectivity. The CNF-(Salen)Cr(Ⅲ) complex maintained high catalytic activity after six cycles of repeated runs and has acceptable catalytic effect on other series of epoxies. Based on density functional theory (DFT) calculations, a reaction mechanism including adsorption activation of epoxides, epoxides ring opening, CO 2 insertion, and the formation of cyclic carbonate, was proposed for the CNF-(Salen)Cr(Ⅲ) complex catalyzed cycloaddition of CO 2 with epoxides.
✓ 已验证
产品关联
DOI
高影响因子
CELLULOSE
·
2023
·Vol. 30
·期 12
·7763-7777
·
IF 5.7
Shen Yun,Li Bin,Wu Meiyan,Chen Xiuping,Guan Yihao,Wang Shuangjia,Li Yiming
Oil gelling agent serves as potential materials in the treatment of marine oil pollution. However, the reported oil gelling agents have some limitations in practical applications, such as the high cost, complex synthesis, secondary pollution, and the lack of enough storage space for the inorganic oil gelling agents. Here, a novel powdery oil gelling agent with a hierarchical porous structure was developed and used in remediating oil pollution on the water surface. Based on the three-dimensional (3D) network of cellulose nanofibrils/silicon dioxide (CNFs/SiO 2 ), it was found that GO acted as a larger skeleton and formed a double skeleton 3D network with CNFs to successfully construct the oil gelling agent (S/GO/CNFs/SiO 2 , SGCS) with hierarchical porous structure and selective wettability. SGCS can efficiently solidify various oil independent of environmental factors (temperature and pH), especially the accessibility of the large pores and the capillary action of the small pores contribute to the faster solidifying of crude oil. Resulting from the photothermal conversion function of GO, it shows the ability to recovery oil from the solidified state to achieve higher economic benefits. This study overcomes to a certain extent the current limitations of oil gelling agents and will provide powerful support for the application of oil gelling agents in practical marine oil spills. Graphical abstract Double skeleton powdery oil gelling agent constructed by cellulose nanofibrils and graphene oxide was successfully fabricated and utilized to effectively remove marine oil spill.
✓ 已验证
产品关联
DOI
高影响因子
INDUSTRIAL CROPS AND PRODUCTS
·
2023
·
IF 5.9
Lijun Kan,Xiaoqian Zhang,Qingying Huang,Yuyuan Wang,Miao Tian,Quanbo Huang,Wenguang Wei,Fengshan Zhang,Xiaohui Wang
Research on bio-based, fluorine free, and silane free superhydrophobic paper was of great significance in promoting the development of sustainable materials. Herein, we presented a facile and green method for fabricating superhydrophobic paper. First, a cellulose-based hydrophobic material (DAC-ODA) was synthesized by reacting dialdehyde cellulose (DAC) with octadecylamine (ODA) via a Schiff base reaction. Then, silica nanoparticles was used to enhance the surface roughness of the coating. The resulting coated paper exhibited superhydrophobic with a water contact angle of 155 ± 0.6° and a sliding angle of 4.1 ± 0.4°. Moreover, excellent repellent performances towards both cold and hot water were also observed. The superhydrophobicity of the coated paper were well maintained even when exposed to acidic/alkaline erosions and high temperature environment. Additionally, the coated paper demonstrated good recyclability, biodegradability, and biocompatibility. Thus, this cellulose-based superhydrophobic paper would be potential candidates for fabricating disposable superhydrophbic packaging materials with broad applications.
✓ 已验证
产品关联
DOI
高影响因子
International Journal of Electrochemical Science
·
2023
·
IF 1.5
Chaofan Huang,Lubing Yu,Shuaishuai He,Lihui Gan,Jian Liu,Zhengliang Gong,Minnan Long
The study aims to the preparation of bio-based binders with optimal molecular structure for electrodes and the exploration of their influence on the electrochemical performance of electrodes. At first, a series of Carboxymethyl Cellulose (CMC) with different degree of polymerization (DP) and degree of substitution (DS) were successfully prepared using the specially designed method and their physical characteristics were also investigated. Si anodes were manufactured with the CMC binders and their electrochemical performances were evaluated and compared. As a consequence, the silicon anode containing CMC of DS= 0.38 and DP = 215 showed the best cyclic performance (71% of capacity maintained after the 100th cycle) due to its compatible molecular structure. It is assumed that the CMC with specially designed molecular structure plays a key role in binding the silicon particles during the cycles and weakened the volume effect.
✓ 已验证
产品关联
DOI
高影响因子
CELLULOSE
·
2023
·Vol. 30
·期 12
·7745-7762
·
IF 5.7
Lang Daning,Zhang Chengbo,Qian Qianqian,Guo Chengxin,Wang Lingling,Yang Chao,Wu Ronglan,Wang Wei,Wang Jide,Fu Jihong
The occurrence of oil spills has severe damage upon both the environment and human health. Hence, the development of a green, recyclable, complex environment resistant, and efficient oil–water separation aerogel is required in order to effectively absorb marine or industrial oil. In this study, modified cellulose/N,N'-methylenebisacrylamide/tannin (PCMT) composite porous materials were prepared utilizing the sol–gel method and were modified with tertbutyl acrylate. PCMT possesses a three-dimensional interpenetrating porous structure, exhibiting remarkable oil–water separation performance and excellent compressive strength (PCMT can capable of bearing 7000 times its own weight; PCMT can endure 290.3 kPa pressure at 80% strain when the amount of tannin is 0.2 g). The unique pore structure of PCMT engenders differential oil adsorption capacities (PCMT0, PCMT0.05, PCMT0.1, and PCMT0.2 evince higher adsorption capacities for petroleum ether and dichloromethane, n-hexane and dichloromethane, toluene, and toluene and dichloromethane, respectively). Of critical import, PCMT demonstrates exceptional adaptability to complex environments, wherein the porous materials maintain good hydrophobicity and oil absorption capacity under conditions of vigorous stirring, a wide pH range (1–14), a wide temperature range (4–160 °C), ultraviolet irradiation (8 h), and tape peeling (10 times). Moreover, the porous materials may be employed for the recovery of oil through simple mechanical extrusion, thus demonstrating certain economic significance and the application potential in the treatment of oil spills.
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2023
·
IF 8.2
Hong Li,Jianhua Zhou,Jiarui Yu,Jiaojiao Zhao
The development of environmental-friendly self-healing nanocomposites has attracted much attention. In this paper, the light-activated cellulose nanocrystals/ fluorinated polyacrylate-based waterborne coating based on the reversible cycloaddition reaction of the coumarin groups was prepared via Pickering emulsion polymerization. The cellulose nanocrystals (CNCs) modified by the PDMAEMA- b -PGMA- b -P(HFBA- co -VBMC) copolymer were studied via FT-IR and TGA . In addition, the dispersity and interface behavior of CNCs before and after modification were investigated by DLS and interfacial tension measurements. Afterwards, we focused on the influence of modified CNCs, PDMAEMA- g -CNC- g- P(HFBA- co -VBMC) (MCNC) dosage on the Pickering emulsion, emulsion polymerization and properties of latex film. The droplet diameter of Pickering emulsion gradually reduced with the increase of MCNC dosage. The MCNC dosage for the minimum average size and optimum stability of latex particles was 1.0 wt%. Moreover, the latex film comprising 1.0 wt% MCNC presented not only high tensile stress (6.0 MPa), large elongation at break (567.70 %) and superior oil/water repellency but also excellent self-healing properties. The outstanding self-healing capability of latex film was attributed to the reversible light-activated dimerization of coumarin groups. The preparation method for the advanced performance waterborne cellulose nanocrystals/fluorinated polyacrylate will provide valuable guidance for the development of versatile materials.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2023
·
IF 5.2
Feiya Fu,Qinqin Chen,Lihuan Chen,Shaojie Cai,Yuxin Lan,Zijun Pan,Haidong Li,Juming Yao,Xiangdong Liu
Mechanically twisting a yarn is a useful and important method for creating internal stress, changing macromolecular orientation, and affording interesting fiber properties, including mechanical, structural, physical and chemical properties. Bacterial cellulose (BC) nanofibers are a new type of highly crystalline bionanofibers exhibiting excellent intrinsic mechanical properties . Herein, BC macrofibers with a diameter of 0.35–0.53 mm were prepared from BC hydrogel films using a two-step technique involving drying and twisting processes. Moreover, the effects of the drying method (oven- and freeze-drying) and those of the processing steps on the morphologies, structures, and physicochemical properties of the macrofibers were investigated. Results indicated that only the wet twisting–first process affords continuous macrofibers with a compact and uniform structure. The tensile strength and elongation at break of the macrofibers were 199 MPa and 24%, respectively. Furthermore, by introducing graphene oxide (GO) to the macrofibers, a photothermal and moisture actuator was facilely constructed, which could produce a twisting motion of 0.39 rpm and an untwisting motion of 0.6 rpm. This study provides insights into methods to easily alter the properties of BC macrofibers, which is pivotal for the macrofiber’s potential application in intelligent devices.
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2023
·
IF 8.2
Duoduo He,Liying Qian,Xingyu Chen,Beihai He,Junrong Li
Electromagnetic interference (EMI) shielding paper with durability and high effectiveness is of significant importance to long-term service for preventing EMI pollution. Herein, we report a practical method for preparing cellulose paper/Ag composite with outstanding durable and ultrahigh EMI shielding performance by electroless silver plating. The silver deposition process, the surface morphology, the silver content and conductivity of the composite can be controlled by varying the amount of N -acetyl-L-cysteine (NAC) grafted onto the cellulose fibers and ammonia amount for silver-ammonia complex formation. Moreover, the grafted NAC with thiol groups on cellulose can enhance the adhesion between silver and cellulose paper, meanwhile, NAC as the reducing agent can result in a more complete flower-shaped silver structure and reducing the reflection of electromagnetic waves in silver layer. The composite exhibited excellent conductivity, EMI shielding effectiveness (SE) up to 106 dB and outstanding durability. After 10,000 bending times and 60 abrasion cycles respectively, the electrical resistance of the composite only increased from 0.030 Ω/sq. to 0.041 Ω/sq. and 0.050 Ω/sq., and the EMI SE decreased to 102 dB and 105 dB.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CARBOHYDRATE POLYMERS
·
2023
·
IF 11.2
Weina Wu,Ying Zhou,Jiefeng Pan,Yingying Wu,Gulden Goksen,Ping Shao
In this study, F-ZnO NPs were used as antibacterial agents , mussel bionic dopamine exerted its adhesive action to immobilize F-ZnO NPs on the pectin/CNF aerogel skeleton. Fruit and vegetable antimicrobial mats with safety, long duration of action and high efficiency were prepared and its potential application has been investigated. The results showed that a dopamine layer was deposited on the surface of the CNF , which promoted the tight adhesion of the F-ZnO NPs to the aerogel skeleton. The F-ZnO@D-CNF aerogel exhibited a slow release of zinc ions , with the first two days being 0.40 ± 0.16 and 1.01 ± 0.13 mg/mL. The aerogel was light, can stand on the petals without collapsing, has regular and uniform pore structure , good tensile/compressive properties and high antibacterial/anti-fungal properties. Strawberries packaged with F-ZnO@D-CNF aerogel exhibited an extended shelf life of 5 days. Additionally, the strawberries maintained a soluble solid content of 6.9 ± 0.82 % and a Vc content of 44.67 ± 3.51 mg/100 g. The weight loss, color and firmness were also notably superior to the other four groups. The final concentration of zinc ions in strawberries was 3.71 ± 0.28 μg/g, which is far below the recommended dietary intake.
✓ 已验证
产品关联
DOI
PubMed
高影响因子